Meerut Development Authority Tender

Coupling Guard

Common Base Frame

Specifications

Self Priming Mud Pump fitted with Mech Seal SucxDis: 150X150mm, Power Rating:20HP/1450RPM Flow: 180000/hr, head: 25 mtr Negative upto 2.5 Meter MOC: Wetted Parts: CI, Bearing Housing: CI Or Equivalent or as per direction of E/I.

Supply and fixing of fully automatic star delta starter of ABB/L&T/Siemens Make Suitable For 10 Hp Moter With Kit-Kat & Copper Cable Lead Fitting

S/F of MS Column Pipe 150mm x 6.0 mm Outlet Line 6 Mt Long With Both end Flanged. Including Jointing Material Gaskit With Nutbolt

S/L of 150mm MS pipe inlet for req for site with NRV&Flexible Pipe

S/F of 150 mm MS pipe Outlet 2 Mt Long With Flanged

S/F of 150mm CI DF Band 90

Excavation in foundation. In ordinary soil (Loan, clay or sand) including lift upto 1.50 M. and lead upto 30M. And including filling watering and ramming of excavted earth (into the trenches or into the space between the building and the sides of foundation treaches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charges upto a distance of 30M. from the foundation trenches. (where machine can not move).

Supply and Erraction of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel base with bottom and top cable entries Electrical control panel with TPN MCCB's ( four pole 36 KA With thermal magnatic release) Switches complete and instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameter (KVA,P.F,KW etc)in each phase with touch type selector switches for different readings, instrument fuse, current transformer etc. The pannel board shall have suitable capacity electrolytic aluminium busbar as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp incoming etc.

The Job including the grounting of the board as per direction of Engineer-in charge. All out going of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.

Incoming

100 Amp MCCB-1No

Outgoing

63 Amp. MCCB-2 Nos.

Cat.B. Pannel Cubicle Type.

S/B of safe Earthing Electrod T-19 Cu-copper coated, length 300 mm, outer pipe 48.4mmx 3.2mm, inner pipe 26.9mm X 2.6, terminal Dia 12mm, Coating 80-100 micron filled with crystalling conducting mixtur (CCM) having Anti Corrosive & conductive property with 50 Kg activated soil (BFC) capable reducing capacity along with 30 cm square C.I frame with hinged cover and manonry housing. (from electrode terminal to switch board, cost of 25 x 3 copper strip will be extra) Make: As approved in U.P.P.W.D., & C.P.R.I. Certified.

S/L of 25mmx3mm G.I. Strip from earth elecrode directly in the ground as required complete in all respect.

S/L of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75mm. Thick sand all around and protected with burnt brick on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. the armouring of the cable shall be property connected with the earth conductor by clamps etc.

70 sqmm 3-1/2 core