Mathura Vrindavan Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Mathura Vrindavan Development Authority - MVDA Tender
Civil And Construction
Eprocure
Opening Date3 Feb 2025
Closing Soon17 Feb 2025
Tender Amount₹ 3,61,17,000
AI Insights
Technical
Technical
Financial
Bid Capacity
... View More
For different categories of work, the bid capacity requirements are: 1. Work more than 40.00 Lacs & up to 50.00 Lacs: - Cumulative turnover: 1.5 times bid value - Liquid assets: 15% of the bid value 2. Work more than 50.00 Lacs & up to 150.00 Lacs: - Cumulative turnover: 1.5 times bid value - Liquid assets: 20% of the bid value 3. Work more than 150.00 Lacs & up to 300.00 Lacs: - Cumulative turnover: 1.5 times bid value - Liquid assets: 25% of the bid value 4. Works more than 300.00 Lacs: - Cumulative turnover: 2.0 times bid value - Liquid assets: 25% of the bid value Additionally, the contractor should have a minimum tangible net worth of at least 25% of the bid value. The formulas for calculating cumulative turnover and liquid assets are based on the bid value, with specific percentages applied according to the work value category.
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the category of work. For works up to 40.00 Lacs, the tenderer should have at least four years of experience in similar works in the organized sector. For other categories:
- Work more than 40.00 Lacs & up to 50.00 Lacs: Two jobs of total value equal to the bid value.
- Work more than 50.00 Lacs & up to 150.00 Lacs: Two jobs of total value equal to the bid value.
- Work more than 150.00 Lacs & up to 500.00 Lacs: Two jobs equal to bid value or one job of total 75% of bid value.
- Works more than 500.00 Lacs: Two works to total value 75% to the bid value. The tenderer shall furnish proof showing that he has a work experience of at least 4 years unless qualified for relaxation as per clause 3.1. Evidence of satisfactory execution of work that has been executed by the tenderer during the last four years in organized sectors has to be produced. For work more than 40.00 Lacs & up to 50.00 Lacs, if the company is owned by a Diploma engineer, a relaxation of 1 year in experience will be given, and if owned by a Graduate engineer, a relaxation of 2 years in experience will be given. The cumulative turnover during the last three consecutive years is considered, with the following requirements:
- For work more than 40.00 Lacs & up to 50.00 Lacs: 1.5 times bid value (B.O.Q.) and 15% of the bid value
- For work more than 50.00 Lacs & up to 150.00 Lacs: 1.5 times bid value (B.O.Q.) and 20% of the bid value
- For work more than 150.00 Lacs & up to 300.00 Lacs: 1.5 times bid value (B.O.Q.) and 25% of the bid value
- For works more than 300.00 Lacs: 2.0 times bid value (B.O.Q.) and 25% of the bid value The bidder should have a minimum tangible net worth of at least 25% of the bid value. The net worth will mean the value of Fixed Assets as per the last audited Balance Sheet (after providing Depreciation) plus Net working capital (current assets minus current liabilities). The technical staff requirements vary based on the work category:
- For work more than 40.00 Lacs & up to 50.00 Lacs: Diploma Engineer 1
- For work more than 50.00 Lacs & up to 150.00 Lacs: Graduation Engineer 1, Diploma Engineer 1
- For work more than 150.00 Lacs & up to 300.00 Lacs: Graduation Engineer 2, Diploma Engineer 2
- For works more than 300.00 Lacs: Graduation Engineer 2, Diploma Engineer 3 The declaration for the technical staff by the Contractor will be given in the form attached as Appendix C (in the presence of Notary public with details of the required staff).
Costs
EMD
₹ 20,06,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPMVD_1001254_6Tender No
28/MVDA/2024-25Tender Authority
Mathura Vrindavan Development Authority ViewPurchaser Address
-Website
http://https://mvda.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Construction of Granular Sub Base by Providing Granular Material, spreading in uniform layers with Motor Grader on prepared surface, mixing by mix in placed method with Froont & Loader at OMC and compacting with Vibratory Roller to achieve the desired density, complete as per clause 401
440
2572
1131680
... More
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 mm dia piles
640
2232
1428480
... More
Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter (only the nos. of extra bulbs are to be paid) 300 mm dia piles
64
1912
122368
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
309
6920
2138280
... More
Centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete
208
285
59280
... More
Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers
482
536
258352
... More
Centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, Abutments, posts and Struts
58
536
31088
... More
Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more.
572
7852
4491344
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
55
5366
295130
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
103
6803
700709
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
446
260
115960
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
446
299
133354
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
892
113
100796
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
587
135
79245
... More
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
306
162
49572
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
1500
1418
2127000
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing
complete.
267
1714
457638
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineerin-Charge. Marble work
275
217
59675
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
70379
141
9923439
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
28152
97
2730744
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²
1878
791
1485498
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²
77
713
54901
... More
Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete :
162
1357
219834
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
1878
113
212214
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
2928
794
2324832
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group-C
280
1402
392560
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
35
1506
52710
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1050
248
260400
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
560
280
156800
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
210
325
68250
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
140
447
62580
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
70
28
1960
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 run of cable
140
72
10080
... More
Supplying and fixing of following sizes of pvc conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.25 mm
1050
110
115500
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
35
280
9800
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
28
362
10136
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
28
445
12460
... More
Supplying and fixing brass batten/ angle holder including connections etc. as required.
28
99
2772
... More
Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required.
42
90
3780
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
28
75
2100
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep
28
342
9576
... More
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
70
157
10990
... More
Installation of exhaust up to 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required
28
342
9576
... More
Extra for fixing the louvers/ shutters complete with Frame for a exhaust fan of all sizes
28
157
4396
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
84
2075
174300
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of
12 mm dia M.S. bar bent to shape as per standard drawing.
84
160
13440
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
42
194
8148
... More
Double pole
28
498
13944
... More
Triple pole
28
765
21420
... More
Triple pole and neutral
14
933
13062
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
28
1541
43148
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
28
5681
159068
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
105
536
56280
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
105
185
19425
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA
70
770
53900
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA
140
1350
189000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%