Mathura Vrindavan Development Authority Tender

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including Kg welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Retro-ReflectiveSheetlng type-IV with 4 mm thick ACM Single Side Providing & fixing of reflective signs Cth a corrosion resistant 4 mm thick with 0.4 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2012 retro reflective sheeting with back frame MS angle of 35x35x5 mm. Legends , letters , numerals and borders etc should be as per MoRTH specification No- 801.3.7 .The sheeting shall have a pressure - sensitive adhesive of the aggressive - tack type requiring no heat , solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer, The ACM (Aluminium Composite Materials) shall be fixed on the Back frame MS Angle with riveting. Micro prismalic type IV Retro re8ective sheeting confirming lo ASTM 04956-09 shall be Pressure fixed. The Retro reflective sheeting shall be tesled for a certificate of having the sheeting tested for coefficient of redo refleclion, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these lests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of lhe sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by lhe manufacture in abroad. Alternatively, a certificate confoming to ASTM Spec?ication (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, Ihe Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:20t2 & Proof of Ihe same Report shall be up1oaded which quoting tender. The rale shall include all materials, labour, T&P, Iransportalion, installation and lncidentals all complete as per direction of the Engineer-in-Charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture