Mathura Vrindavan Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Mathura Vrindavan Development Authority - MVDA Tender
Civil And Construction
Eprocure
Opening Date25 Nov 2023
Closing Date1 Dec 2023
Tender Amount₹ 30,88,52,000
Costs
EMD
₹ 1,56,42,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Work 1 Janpad Mathura Ke Anatargat Gokul Bairage Ke Upstream Baayin Taraf Vasudev Vatika Ke Vikas Evam Nirman Ka Karya Part A Civil Work
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UPMVD_860698_7Bid Award Id
ViewTender No
24/mvda/2023-24Tender Authority
Mathura Vrindavan Development Authority ViewPurchaser Address
-Website
http://https://mvda.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Clarification regarding tender
BOQ Items
... More
SUB HEAD :- PLASTER & POINTING WORK 15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
742.79
152271
205
... More
SUB HEAD :- FLOORING 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick,
side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. 40mm thick Gang saw cut Red sand stone
563
365950
650
... More
SUB HEAD :- PAINTING AND DISTEMPREING Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1989
149175
75
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
1989
198900
100
... More
SUB HEAD :- STONE WORK Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
512
972800
1900
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
164
90200
550
... More
PART (2) :--- Water Body in Front of Amphitheater SUB HEAD :- EARTH WORKS Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.( Small Work)
11059
1603555
145
... More
1.50 m to 3.00m depth
5898
1002660
170
... More
SUB HEAD :- CONCRETE WORK Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete, Including cost of form work. in Foundation and floors.
634
3518700
5550
... More
Construction of Granular sub-Base (GSB) by providing Coarse graded material, spreading in uniform layers with moter grader on prepared surface, mixing by mix in place method with rotavator at OMC & compacting with vibratory roller to achieve the desired density, complete as per clause-401
1665
4282380
2572
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works upto plinth level
724
5864400
8100
... More
Steel reinforcement for R.C.C. work includig straightning , Cutting, Bending, Placing in position and Binding all Complete
1120
9587200
8560
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
11059
1083782
98
... More
SUB HEAD :- BRICK WORK Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
104
582400
5600
... More
SUB HEAD :- PLASTER & POINTING WORK 15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
898.7
184233
205
... More
SUB HEAD :- FLOORING 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick,
side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. 40mm thick Gang saw cut Red sand stone
3322
2159300
650
... More
Providing and laying Ceramic glazed non skid floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
3440
2408000
700
... More
SUB HEAD :- FLOORING Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 400mm Dia Piles
684
1852956
2709
... More
Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) (400mm dia pile)
76
133000
1750
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge Initial test (Test Load 2.5 times the Safe capacity)
1
42774
42774
... More
Routine test (Test Load 1.5 times the Safe capacity)
2
30664
15332
... More
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.
2
1632
816
... More
PART(3) :--- Building :-Entrance Plaza 01 SUB HEAD :- EARTH WORKS Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.( Small Work)
416
60320
145
... More
Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge.(Small Work)
1522
205470
135
... More
Extra for Earth work in embankment mechanically compacted to 95% proctor density In ordinary soil, excavation to be done form of regular pits not exceeding 0.5mtr in depth and work embankment to be in 20cm layer including ramming and dressing pulveerzation the surf Including Supply of Labour, T&P, Roller and water sprinkler
1522
60880
40
... More
Cartage of earth , ballast, Kankar Coal, grit or sand excluding loading & including unloading with 5km cartage.
1522
198621
130.5
... More
SUB HEAD :- CONCRETE WORKS provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
31
172050
5550
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
145
81345
561
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works upto plinth level
94
761400
8100
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works above plinth level to floor V level
86
739600
8600
... More
Steel reinforcement for R.C.C. work includig straightning , Cutting, Bending, Placing in position and Binding all Complete
301
2576560
8560
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
832
81536
98
... More
SUB HEAD :- BRICK WORK Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
21
117600
5600
... More
Class-150 (non Modular) brick work but in in 1:4 cement and coarse sand mortar super structure above plinth level upto floor five level (upto five stories) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cm.
57
344850
6050
... More
SUB HEAD :- ANTI TRMITE TREATENT WORKS Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (1cement:2 coarse sand) to match the existing floor with Chlorpyriphos / lindane EC 20% with 1% concentration.
233
52425
225
... More
SUB HEAD :- DOOR AND WINDOW WORK Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:ISI marked Stainless Steel butt hinges with necessary screws ( Excluding the cost of fittings) (A) 35 mm thick
10
17000
1700
... More
Same as item No-1 and Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
10
3600
360
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
1.0 mm thick
19
10640
560
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
392
164640
420
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .
(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness
19
18240
960
... More
Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-Charge (Door Handle, lock and stopper etc. to be paid separately)
13
45825
3525
... More
Providing and fixing 12 mm toughened glass partition with neccessary fittings and Applying clear silicon on joints complete in all respect.
18
49842
2769
... More
Providing approved brand and manufacture SS304 grade H type 450 mm Pull Handle with 25.4 mm dia (SH18PSS (25.4MM)) fixed with SSscrews etc.complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge.
6
24966
4161
... More
Providing approved brand and manufacture Centre Patch Lock with cylinder complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge
6
26646
4441
... More
Providing approved brand and manufacture SS304 grade Door Stoper Mounted Half Round fixed with SS screws etc.complete in all respects as per manufacturers' specifications & as directed by Engineer-in-charge
4
2036
509
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete
4
2400
600
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door 'closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
4
2860
715
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than. grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 250x10mm
4
460
115
... More
SUB HEAD :- IRON & MILD STEEL WORK Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
2446.03
220142
90
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
3726.8
409948
110
... More
SUB HEAD :- ROOF WORKS P/L integral cement based water proofing treatment BRICK KOBA including preperation of surface as required treatment of roofs, consisting of following opperations. (a)-applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with waterproofing compound confirming to IS:2645 including adjoining walls upto 300mm height. (b)-laying brick bats with mortar with 50% 0f cement mortar 1:5(1cement:5coarse sand), admixed with waterproofing compound conforming to IS:2645 over 20mm thick layer of cement mortar of mix 1:5 (1cement:5coarse sand),admixed with waterproofing compound conforming to IS:2645 to required slope including rounding of junctions of wall and slab.(c)-after two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with waterproofing compound confirming to IS:2645. (d)-finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1cement:4coarse sand), admixed with waterproofing compound conforming to IS:2645 including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300mmx300mm square 3mm deep.(e)-the whole terrace so finished shall be flooded with water for a minimum period two weeks for curing and for final be flooded with water for a mkinimum period bof two weeks for curing and for final test. with average thickness of 120mm and minimum thickness at khurrah as 65mm.
229
270220
1180
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete.
5
1075
215
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
146
25550
175
... More
Providing and ficing on wall face unplasticized Rigid PVC rain water pipes confirming to IS : 13592 Typw A Inlcuding jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion (i) Singe Cocketed Pipes 110 mm Diameter
24
9360
390
... More
Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24X0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI metal ceiling lay in plain tegular edge global white color tiles of size 596 x 596 mm and 0.5 mm thick with 8 mm drop, made of GI sheet having galvanizing of 100 gm/sqm (both side inclusive) and electro statically polyster powder coated of thickness 60 micrones (minimum), including factory painted after bending.
282
338400
1200
... More
SUB HEAD :- PLASTER & POINTING WORK 12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
520.82
98955
190
... More
15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
195
39975
205
... More
6mm ceiling plaster 1:3 (1 cement : 3 fine sand in F.M. not less than 1.25, 1:3 including chipping of RCC surafce before ceiling plaster. The cost of including all material, labout T&P and scaffolding etc. complete.
326
48900
150
... More
Making Grooves 10 to 12 mm wide X 8mm Deep in plaster of the wall or in ceiling vertically or horizontally as required.
265
8480
32
... More
Making drip Course in sunshade or FACIA as per direction of Engineer- In- Charge including supply of all material Labout etc. reuired for proper completion of work.
102
2040
20
... More
SUB HEAD :- FLOORING Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints including preparation of 75mm thk base with concrete 1:4:8 Complete E/I. for 600x600 mm size
3
4650
1550
... More
Black Granite flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Black Granite stone quality
21
81900
3900
... More
Marble Stone flooring with 20mm thick marble stone as per sample of marble approved by Engineer- incharge over 20mm thk base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete.
Fore marble White Dhugri Quality
355
869750
2450
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (MARBLE WORK) For Red sand stone work
35
4830
138
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
4
1104
276
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
1
436
436
... More
SUB HEAD :- PAINTING AND DISTEMPREING Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
1042
78150
75
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
1042
104200
100
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture
64
4800
75
... More
SUB HEAD :- STONE WORK Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
457
868300
1900
... More
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc.
6
38400
6400
... More
Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :
64
2778432
43413
... More
Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in : Circular or polygonal pillars
64
499712
7808
... More
Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m.
64
135232
2113
... More
Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :Red sand stone
111
161505
1455
... More
Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded including providing and fixing with 4 Nos Stainless Steel cramp 25x6 mm 30 cm long
186
597804
3214
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles 300x300 mm size of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tiles ,
48
55152
1149
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
220
121000
550
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6mm
2742
54840
20
... More
SUB HEAD :- MISC WORK Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design
1
26343
26343
... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
1
3057
3057
... More
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :
720
1538640
2137
... More
Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid)
80
120880
1511
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles
method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification
& the direction of Engineer in-charge. Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge Initial test (Test Load 2.5 times the Safe
capacity)
1
42774
42774
... More
Routine test (Test Load 1.5 times the Safe
capacity)
2
30664
15332
... More
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.
2
1632
816
... More
PART(4) :---- Building :-Toilet Block -02 Nos. SUB HEAD :- EARTH WORKS Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.( Small Work)
470
68150
145
... More
1.50 m to 3.00m depth
120
20400
170
... More
SUB HEAD :- CONCRETE WORKS Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
16
88800
5550
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
74
41514
561
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works upto plinth level
28
226800
8100
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works above plinth level to floor V level
90
774000
8600
... More
Steel reinforcement for R.C.C. work includig straightning , Cutting, Bending, Placing in position and Binding all Complete
154
1318240
8560
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
940
92120
98
... More
SUB HEAD :- BRICK WORK Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
10
56000
5600
... More
Class-150 (non Modular) brick work but in in 1:4 cement and coarse sand mortar super structure above plinth level upto floor five level (upto five stories) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cm.
74
447700
6050
... More
SUB HEAD :- ANTI TRMITE TREATENT Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (1cement:2 coarse sand) to match the existing floor with Chlorpyriphos / lindane EC 20% with 1% concentration.
126
28350
225
... More
SUB HEAD :- DOOR AND WINDOW WORK Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:ISI marked Stainless Steel butt hinges with necessary screws ( Excluding the cost of fittings) (A) 35 mm thick
24
40800
1700
... More
Same as item No-1 and Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
24
8640
360
... More
Providing & fixing 30 mm thick plain factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15mm x 15mm for top and bottom rails. M.S. frame shall have a cost of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC "C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both sides forming styles and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top & bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both sides of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top & bottom rail. panelling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C channel using pVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturers specification and drawing
26
52260
2010
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
1.0 mm thick
46
25760
560
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
746
313320
420
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness
12
11520
960
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete
8
4800
600
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper
8
240
30
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than. grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 250x10mm
48
5520
115
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125mm
32
2720
85
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door 'closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
8
5720
715
... More
SUB HEAD :- ROOF WORKS P/L integral cement based water proofing treatment BRICK KOBA including preperation of surface as required treatment of roofs, consisting of following opperations. (a)-applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with waterproofing compound confirming to IS:2645 including adjoining walls upto 300mm height. (b)-laying brick bats with mortar with 50% 0f cement mortar 1:5(1cement:5coarse sand), admixed with waterproofing compound conforming to IS:2645 over 20mm thick layer of cement mortar of mix 1:5 (1cement:5coarse sand),admixed with waterproofing compound conforming to IS:2645 to required slope including rounding of junctions of wall and slab.(c)-after two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with waterproofing compound confirming to IS:2645. (d)-finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1cement:4coarse sand), admixed with waterproofing compound conforming to IS:2645 including laying glass fiber cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300mmx300mm square 3mm deep.(e)-the whole terrace so finished shall be flooded with water for a minimum period two weeks for curing and for final be flooded with water for a mkinimum period bof two weeks for curing and for final test. with average thickness of 120mm and minimum thickness at khurrah as 65mm.
126
148680
1180
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete.
4
860
215
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
72
12600
175
... More
Providing and ficing on wall face unplasticized Rigid PVC rain water pipes confirming to IS : 13592 Typw A Inlcuding jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion (i) Singe Cocketed Pipes 110 mm Diameter
16
6240
390
... More
SUB HEAD :- PLASTER & POINTING WORK 12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
238
45220
190
... More
15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
150
30750
205
... More
6mm ceiling plaster 1:3 (1 cement : 3 fine sand in F.M. not less than 1.25, 1:3 including chipping of RCC surafce before ceiling plaster. The cost of including all material, labout T&P and scaffolding etc. complete.
198
29700
150
... More
Making Grooves 10 to 12 mm wide X 8mm Deep in plaster of the wall or in ceiling vertically or horizontally as required.
198
6336
32
... More
Making drip Course in sunshade or Facia as per direction of Engineer- In- Charge including supply of all material Labout etc. reuired for proper completion of work.
160
3200
20
... More
SUB HEAD :- FLOORING Providing and laying Vitrified tiles in floor with lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints including preparation of 75mm thk base with concrete 1:4:8 Complete E/I.
162
251100
1550
... More
Black Granite flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Black Granite stone quality
30
117000
3900
... More
Providing edge moulding to 18 mm thick marble stone counters, V anities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (MARBLE WORK)For Red sand stone work
92
12696
138
... More
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
18
4968
276
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
16
6976
436
... More
SUB HEAD :- PAINTING AND DISTEMPREING Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
436
32700
75
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
436
43600
100
... More
SUB HEAD :- STONE WORK Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
414
786600
1900
... More
Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointingwith white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :Red sand stone
1.31
56871
43413
... More
Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in :Triangular or Square or rectangular pillars
1.31
3610
2756
... More
Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :Red sand stone
66
96030
1455
... More
Providing and fixing red sand stone brackets 55x22.5x45 cm sunk and moulded including providing and fixing with 4 Nos gun metal cramp 25x6 mm 30 cm long
122
392108
3214
... More
Providing and fixing 10 mm thick acid and/or alkali resistant tiles 300x300 mm size of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tiles ,
406
466494
1149
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
200
110000
550
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6mm
2484
49680
20
... More
SUB HEAD :- MISC WORK Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design
2
52686
26343
... More
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
2
6114
3057
... More
Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :
288
615456
2137
... More
Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid)
32
48352
1511
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles
method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification
& the direction of Engineer in-charge.Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing.Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge. Initial test (Test Load 2.5 times the Safe
capacity)
2
85548
42774
... More
Routine test (Test Load 1.5 times the Safe
capacity)
4
61328
15332
... More
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.
4
3264
816
... More
PART (5) :--- DEVELOPMENT OF POND SUB HEAD :- EARTH WORKS Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.( Small Work) 1.50 m to 3.00m depth
12890
1869050
145
... More
Extra for Earth work in embankment mechanically compacted to 95% proctor density In ordinary soil, excavation to be done form of regular pits not exceeding 0.5mtr in depth and work embankment to be in 20cm layer including ramming and dressing pulveerzation the surf Including Supply of Labour, T&P, Roller and water sprinkler
12890
515600
40
... More
SUB HEAD :- CONCRETE WORKS Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
128
710400
5550
... More
Construction of Granular sub-Base (GSB) by providing Coarse graded material, spreading in uniform layers with moter grader on prepared surface, mixing by mix in place method with rotavator at OMC & compacting with vibratory roller to achieve the desired density, complete as per clause-401
363
933636
2572
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works upto plinth level
934
7565400
8100
... More
Steel reinforcement for R.C.C. work includig straightning , Cutting, Bending, Placing in position and Binding all Complete
1519.86
13010001
8560
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
12890
1263220
98
... More
SUB HEAD :- BRICK WORK Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
5
28000
5600
... More
Coursed Rubble Masonary ( First Sort) with hard stone in foundation & plinth with cement mortar 1:4 (1 cement: 4 Coarse Sand)
1134
6010200
5300
... More
SUB HEAD :- FLOORING 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick,
side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. 40mm thick Gang saw cut Red sand stone
774
503100
650
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
2490
1743000
700
... More
Providing edge moulding to 40 mm thick stone including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (MARBLE WORK) For Red sand stone work
852
117576
138
... More
SUB HEAD :- MISC WORK Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :400mm Dia Piles
1872
5071248
2709
... More
Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) (400mm dia pile)
208
364000
1750
... More
Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles
method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification
& the direction of Engineer in-charge.Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge. Initial test (Test Load 2.5 times the Safe
capacity)
1
42774
42774
... More
Routine test (Test Load 1.5 times the Safe
capacity)
2
30664
15332
... More
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS 14893 including surface preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and high skill trained personal for conducting the test & submission of results, all complete as per direction of Engineer-in-charge.
2
1632
816
... More
PART (6) :--- PUBLIC PLAZA 01 FRONT ENTRANCE STAIRS SUB HEAD :- EARTH WORKS Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.( Small Work)
1106.49
160441
145
... More
Extra for Earth work in embankment mechanically compacted to 95% proctor density In ordinary soil, excavation to be done form of regular pits not exceeding 0.5mtr in depth and work embankment to be in 20cm layer including ramming and dressing pulveerzation the surf Including Supply of Labour, T&P, Roller and water sprinkler
8026
321040
40
... More
Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge.
8026
1083510
135
... More
Cartage of earth , ballast, Kankar Coal, grit or sand excluding loading & including unloading with 5km cartage.
3831.42
500000
130.5
... More
SUB HEAD :- CONCRETE WORKS Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
163
904650
5550
... More
Construction of Granular sub-Base (GSB) by providing Coarse graded material, spreading in uniform layers with moter grader on prepared surface, mixing by mix in place method with rotavator at OMC & compacting with vibratory roller to achieve the desired density, complete as per clause-401
285
733020
2572
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works upto plinth level
1426
11550600
8100
... More
Steel reinforcement for R.C.C. work includig straightning , Cutting, Bending, Placing in position and Binding all Complete
1853.8
15868528
8560
... More
SUB HEAD :- BRICK WORK Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
34
190400
5600
... More
Coursed Rubble Masonary ( First Sort) with hard stone in foundation & plinth with cement mortar 1:4 (1 cement: 4 Coarse Sand)
60
318000
5300
... More
SUB HEAD :- STONE WORK Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :
1809
3437100
1900
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
869
477950
550
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 6mm
10854
217080
20
... More
Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointingwith white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :Red sand stone
49
2127237
43413
... More
SUB HEAD :- FLOORING Providing and Laying kota stone flooring over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.25mm thick
673
908550
1350
... More
Kota stone slab 20mm thick in risers of steps, skirting dado and pillars laid on 10mm thick cement mortar 1:3 (1 cement : 3 coarse sand) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
104
104000
1000
... More
Marble Stone flooring with 20mm thick marble stone as per sample of marble approved by Engineer- incharge over 20mm thk base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete.
922
2258900
2450
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (MARBLE WORK) For Red sand stone work
650
89700
138
... More
EXTERNAL DEVELOPMENT WORK PART(7) :--- BOUNDARY WALL SUB HEAD :- EARTH WORKS Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.( Small Work)
1953.31
283229
145
... More
Extra for Earth work in embankment mechanically compacted to 95% proctor density In ordinary soil, excavation to be done form of regular pits not exceeding 0.5mtr in depth and work embankment to be in 20cm layer including ramming and dressing pulveerzation the surf Including Supply of Labour, T&P, Roller and water sprinkler
13482
539280
40
... More
Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge.
13482
1820070
135
... More
Cartage of earth , ballast, Kankar Coal, grit or sand excluding loading & including unloading with 5km cartage. SUB HEAD :- CONCRETE WORKSProvides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
126
699300
5550
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works upto plinth level
270
2187000
8100
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works above plinth level to floor V level
24
206400
8600
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
60
419040
6984
... More
Steel reinforcement for R.C.C. work includig straightning , Cutting, Bending, Placing in position and Binding all Complete
460.2
3939312
8560
... More
SUB HEAD :- PLASTER & POINTING WORK 12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
266
50540
190
... More
SUB HEAD :- PAINTING WORK Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
266
19950
75
... More
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
266
47880
180
... More
:--- SUB HEAD :- STONE WORK Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointingwith white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :Red sand stone
68
2952084
43413
... More
:--- SUB HEAD :- Coursed Rubble Masonary Coursed Rubble Masonary ( First Sort) with hard stone in foundation & plinth with cement mortar 1:4 (1 cement: 4 Coarse Sand)
3398
18009400
5300
... More
PART (8) :--- SUB HEAD :-Land scaping Work SUB HEAD :- EARTH WORKS Clearing jungle including uprooting of trunk vegetation, grass, brushes, wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
82595
495570
6
... More
Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.
100
14500
145
... More
Extra for Earth work in embankment mechanically compacted to 95% proctor density In ordinary soil, excavation to be done form of regular pits not exceeding 0.5mtr in depth and work embankment to be in 20cm layer including ramming and dressing pulveerzation the surf Including Supply of Labour, T&P, Roller and water sprinkler
64874
2594960
40
... More
Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge.Cartage of earth , ballast, Kankar Coal, grit or sand excluding loading & including unloading with 5km cartage.
64874
8757990
135
... More
SUB HEAD :- CONCRETE WORKS Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
3530
19591500
5550
... More
Construction of Granular sub-Base (GSB) by providing Coarse graded material, spreading in uniform layers with moter grader on prepared surface, mixing by mix in place method with rotavator at OMC & compacting with vibratory roller to achieve the desired density, complete as per clause-401
5371
13814212
2572
... More
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
58387
5721926
98
... More
SUB HEAD :- BRICK WORK Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
6226
34865600
5600
... More
Coursed Rubble Masonary ( First Sort) with hard stone in foundation & plinth with cement mortar 1:4 (1 cement: 4 Coarse Sand)
777
4118100
5300
... More
SUB HEAD :- FLOORING 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick,
side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. 40mm thick Gang saw cut Red sand stone
16610
10796500
650
... More
Supply & Laying of I shaped precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. 60 mm (Rubber molded Grey)
5213
3623035
695
... More
60 mm (Rubber molded Coloured)
5213
3727295
715
... More
Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointingwith white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :Red sand stone
268
11634684
43413
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
80
543520
6794
... More
PART (9):--- Earth Filling Cartage of earth , ballast, Kankar Coal, grit or sand excluding loading & including unloading with 5km cartage.
3367.01
439394
130.5
... More
PART (10) :--- Parking Boundary wall (one side)SUB HEAD :- EARTH WORKS Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches.( Small Work)
1085.49
157396
145
... More
SUB HEAD :- CONCRETE WORKS Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
43
238650
5550
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works upto plinth level
283
2292300
8100
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work upto Plinth Level: 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone aggregate 20mm nominal Size). All works above plinth level to floor V level
11
94600
8600
... More
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
15
104760
6984
... More
Steel reinforcement for R.C.C. work includig straightning , Cutting, Bending, Placing in position and Binding all Complete
401.7
3438552
8560
... More
SUB HEAD :- IRON & MILD STEEL WORK Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
25009.6
2751056
110
... More
SUB HEAD :- BRICK WORK Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
71
397600
5600
... More
Coursed Rubble Masonary ( First Sort) with hard stone in foundation & plinth with cement mortar 1:4 (1 cement: 4 Coarse Sand)
26
137800
5300
... More
SUB HEAD :- PLASTER & POINTING WORK 12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
144
27360
190
... More
SUB HEAD :- PAINTING WORK Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
144
10800
75
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer
196
19600
100
... More
Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
144
25920
180
... More
Part (12) :---- SUB HEAD :- STONE WORK on Brick Work Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointingwith white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :Red sand stone
8
347304
43413
... More
PLUMBING WORKS (Internal & External work) Sanitary Fixtures & CP Brass Fittings Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
6
22500
3750
... More
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
16
11728
733
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
16
18160
1135
... More
Providing and fixing toilet paper holder : C.P. brass
8
4504
563
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid
8
29600
3700
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
8
46384
5798
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
4
1436
359
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore
30
12420
414
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
30
1530
51
... More
Providing and fixing white vitreous china wash basin with special fabricated brackets painted white, faucets as required, 32 mm C.P. brass waste. complete in all respects including cutting and making good the walls where required. Under Counter Wash basin Jaquar Model No.: CNS-WHT-701 , 32 mm CP brass waste Jaquar Model No. ALD-709L130, 15 mm dia CP brass single pillar cock Jaquar Model No. FON-40011 or approved equivalent.
16
41616
2601
... More
Providing and fixing 15mm C.P. copper connecting pipe 450mm long with C.P. brass nuts, washers complete in all respects.(Jaquar Cat No. ALD 803AB or approved equivalent)
16
3776
236
... More
Providing and fixing C.P. brass 15 mm nominal bore two way bib cock Jaquar Model.FON-40041 or Equivalent.
14
12530
895
... More
Providing and fixing C.P. cast brass twin coat hooks fixed to PVC rawl plug with SS screws Jaquar model. No. AKP-35761P or approved equivalent.
14
8820
630
... More
Providing and fixing health faucet with 1 m long flexible tube and wall hook including all fittings Jaquar model No.ALD-CHR-593N or approved equivalent.
14
44240
3160
... More
Providing and fixing liquid dispenser including all fittings complete.(Jaquar Model-AKP-35735P)
16
24352
1522
... More
Providing and fixing 150 litre/ hr. cooling and storage capacity,fully stainless steel electric storage type water cooler ( Blue Star model No. SDLX 15150 or equvalant) with inlet hose connection inbuilt float valve. 2 Nos. outlet foucet, drain tray with waste and pipe up to fllor trap heavy compressor and wire up to socket, 3 pin plug etc complete in all respect.
2
120750
60375
... More
Soil, Waste, Vent & Rain Water Pipes Providing and laying in position cement concrete of specified grade
exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size)
0.2
1300
6500
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
10
2150
215
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
10
396
39.6
... More
Providing and fixing Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 soil, waste and vent pipes . Providing and fixing Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 soil, waste and vent pipes . 100 mm dia.
105
97125
925
... More
Providing and fixing plain bend of required degree Sand cast iron S&S as per IS - 3989. 100 mm dia.
20
6600
330
... More
Providing and fixing terminal guard.Sand cast iron S&S as per IS - 3989. 100 mm
2
600
300
... More
Providing and fixing collar.Sand cast iron S&S as per IS - 3989.'100 mm
5
1625
325
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm
65
19500
300
... More
Providing and fixing trap of self cleansing design with screwed down or hinged with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS - 3989
10
8500
850
... More
Painting sand cast iron/ centrifugally cast (spun) soil, waste, vent pipes and fittings with paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work. 100 mm diameter pipe
105
5985
57
... More
Providing and fixing G.I. Pipes complete with G.I. Fittings and clamps, including cutting and making good the walls etc. (Internal work) 32 mm dia. nominal bore
20
8100
405
... More
50 mm dia. nominal bore
20
13000
650
... More
Painting GI pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality. 32 mm dia. nominal bore
20
300
15
... More
50 mm dia. nominal bore
20
400
20
... More
Providing ing pressure (6 kg/sqcm) including testing labour T & P and all complete fittings160 mm OD
25
13750
550
... More
110 mm OD
30
13500
450
... More
Providing and fixing of GI clamps with EPDM rubber lining Zinc plated for support of vertical soil, waste, vent and rain water pipes, embedded in walls with anchor fastner etc. including cost of cutting holes and making good the walls complete in all respects. For 100 mm dia Pipe
15
2970
198
... More
For 160 mm OD Pipe
10
2350
235
... More
Providing and fixing in position 100x50 mm dia GI reducing elbow including fix to floor with cement mortar.
8
9024
1128
... More
Providing and fixing in position 125x125 mm stainless steel grating for floor trap/floor drain including fix to floor with cement mortar.
18
3744
208
... More
Providing and fixing 100 mm dia GI inlet fitting/ Extension Piece with 2 or 3 inlets of 32 to 50 mm dia, fixed to CI trap with lead joint and set in cement concrete as per drawing complete.
10
8160
816
... More
Water Supply System Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 20 mm nominal outer dia .Pipes.
60
24000
400
... More
25 mm nominal outer dia .Pipes.
30
14400
480
... More
32 mm nominal outer dia .Pipes.
50
30000
600
... More
Internal work - Exposed on wall Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 32 mm dia nominal bore
20
8100
405
... More
40 mm dia nominal bore
20
9600
480
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 32 mm dia nominal bore
20
700
35
... More
40 mm dia. nominal bore
20
1100
55
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 32 mm dia nominal bore
5
1525
305
... More
40 mm dia nominal bore
5
1750
350
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
4000
32000
8
... More
Providing and fixing forged brass ball valve of brass body with hard chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete in all respects. 32 mm nominal bore
2
2434
1217
... More
40 mm nominal bore
2
3546
1773
... More
Storm Water Drainage Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
20
2900
145
... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia.Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre). Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia
140
48300
345
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
5
1050
210
... More
Extra for every additional lift of 1.5m or part thereof inAll kinds of soil (Manhole) Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) up to haunches of S.W/RCC pipes including bed concrete as per standard design. 250 mm diameter
20
15620
781
... More
300 mm diameter
140
126140
901
... More
Providing and laying non-pressure NP2 class (light d uty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :250 mm dia. R.C.C. pipe
20
13420
671
... More
300 mm dia. R.C.C. pipe
120
89520
746
... More
Constructing bricks masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
46270
4627
... More
Extra for depth beyond 45 cm of brick masonry chamber For 455x610 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
9338
4669
... More
Sewerage System Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil
21
3045
145
... More
Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia.
35
12075
345
... More
Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre). Pipes, cables etc, exceeding 80mm dia but not exceeding 300mm dia Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
6
1260
210
... More
Extra for every additional lift of 1.5m or part thereof in All kinds of soil (Manhole)Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : For Bed Concrete of Sewer Lines. 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
2
10018
5009
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :180x150 mm size P typeWith common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
12582
2097
... More
Providing, laying and jointing HDPE Double Wall Coil (DWC) SN-8 Grade pipes confirming to IS: 16098 including all fittings wherever required e.g., tees, bends of any degree, couplings, adapters, plugs, unions etc. and jointing as manufacturer recommondation etc. including testing of joints etc. complete. 150 mm dia.
15
7620
508
... More
200 mm dia.
25
19325
773
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
61200
10200
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
12
3960
330
... More
External Water Supply SystemProviding and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80 mm dia nominal dia. Pipe
150
114000
760
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 40 mm dia nominal dia. Pipe
500
231000
462
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
4
33452
8363
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work :40 mm diameter pipe
500
70500
141
... More
80 mm diameter pipe
150
35700
238
... More
Providing and fixing forged brass ball valve of brass body with hard chrome plated steel ball inside PTFE (Teflon) seat & ring with chrome plated centre handle with female BSP threads complete in all respects. 32 mm nominal bore
2
2434
1217
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia
2
8332
4166
... More
Tubewells Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 ( 1cement : 2 Coarse sand : 4 graded stone aggregate 20 mm nominal size )
1
6350
6350
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. All types of soil 400 mm dia
90
61740
686
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, beyond 90 metre & upto 150 metre depth below ground level. All types of soil 400 mm dia
70
59990
857
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
15
18360
1224
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness 5.40 mm
60
103380
1723
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia
90
163530
1817
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
50
37900
758
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia
1
232
232
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp.
1
1512
1512
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia
2
510
255
... More
Providing, laying, testing & commissioning of 'B' class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia.
80
81200
1015
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia
1
3787
3787
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required : 80 mm dia
1
5847
5847
... More
Supply, Lowering, installation & testing of KSB make submersible pumping set with 7.5 HP to 10 HP motor 4 stage pump suitable for 15-20 m3 hr. at 60 to 100 mtr. Head respectively. With Three Phase.
1
89250
89250
... More
Providing & fixing submersible aluminium cable 6 sq.mm. from submersible pump to panel board.
1
176
176
... More
Providing & fixing Panel Board for submersible pump fitted with DOL starter ammeter, voltmeter single phase preventer standard/indo/cop make MCB of off switch push bottom duly wired and made out of 16/18 SWG sheet.
1
5880
5880
... More
Irrigation System Providing, laying & jointing in position HDPE pipe conforming to IS:4984 :2016 and suitable for the respective working pressures with all fittings and accessories e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces etc. jointing as per manufacturers' instruction, including earth work in excavation and refilling (Earth work includes 450mm of soil cover over the pipe and width of 300mm). HDPE Pipe 90mm OD-PN 10-PE100
330
319440
968
... More
HDPE Pipe 75mm OD-PN 10-PE100
2350
1680250
715
... More
HDPE Pipe 63mm OD-PN 10-PE100
850
467500
550
... More
HDPE Pipe 50mm OD-PN6-PE100
2200
688600
313
... More
HDPE Pipe 40mm OD-PN 6-PE100
7550
1887500
250
... More
Providing & Fixing of Super Pro Gear Driven Pop up ( For Large Lawn) with ABS Riser having 3/4" inlet, Flow Shut Off, 5" Riser height, Radius reduction upto 75%, Patented arc set degree markings, Arc memory clutch with position recall, Time proven patented reversing mechanism. It has rubber cover which seals out dirt and increase product durability, and having optical check valve. It is capable of delivering 0.03 - 0.6 lps with dia of coverage from 2.44 - 14.6 m at 2.0 - 5bar.K-Rain
435
525045
1207
... More
Providing & Fixing of Pro S Heavy Duty Spray Pop up having adjustable Rotary Nozzle ( For Small & Medium Lawn )from 800-3600 capable of covering 5.2-6.4m at 2.07-3.45Bars with a discharge rate of 0.02-0.10lps.The overall pop-up height shall be 4 inch. The Spray Head body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic. It shall have a heavy-duty stainless steel retract spring for easy alignment of the pattern. K-Rain USA/Rainspa, Italy/HIT USA
130
115960
892
... More
Providing & Fixing of Pro S Heavy Duty Spray Pop up having Adjustable arc nozzle( For Narrow Lawn) capable of covering 2.7-5.5m at 2.76Bars with a discharge rate of 0.02-0.27lps.The overall pop-up height shall be 4 inch. The Pro -S line of sprays is distinguished, rugged body and cap, co-moulded seal and heavy-duty retraction spring.The Spray pop up body, stem, nozzle and screen shall be constructed of heavy-duty, ultraviolet resistant plastic. It shall have a heavy-duty stainless steel retract spring for easy alignment of the pattern. The spray pop up will be with 5 colour coded nozzels. K-Rain USA/Rainspa, Italy/HIT USA
400
101600
254
... More
Providing & Fixing of 16 mm/30cm/2lph PCdripline, Pressure-compensating range: 0.5-4.0 bar which Precise and equal amounts of water are delivered over a broad pressure range, 100% uniformity of water and nutrient distrient distribution along the laterial. Dripline have largest filter in each dripper, Recommended filtration: according to drippers flow rate, Double TurboNet: Ladyrinthbwith large water passage. The water is drawn into the dripper from the stream center, preventing the entrance of sediments into the drippers. Netafim/Captain/Dinesh
62000
1302000
21
... More
Providing & Fixing of 16 mm plain Lateral. Netafim/Captain/Dinesh
7000
88200
12.6
... More
Providing & Fixing of button driper 4 LPH. Netafim/Captain/Dinesh
4000
63000
15.75
... More
Providing & Fixing of 3/4''Swing Joint. The swing Joint shall be used as a flexible swing joint assembly for 3/4" inlet sprinklers. The pipe shall be flexible black tubing constructed of linear low density polyethylene material. The tubing shall have a wall thickness of 0.090". It shall shall have an inside diameter of 0.490". The fitting shall be constructed of UV-resistant,thermoplastic material. The Swing aJoint shall have an operating pressure rating of 5.5 bar at 430.Harit/Aqua/K-Rain
464
58464
126
... More
Providing & Fixing of 1/2" Swing Joint. The swing Joint shall be used as a flexible swing joint assembly for 1/2" inlet sprinklers. The pipe shall be flexible black tubing constructed of linear low density polyethylene material. The tubing shall have a wall thickness of 0.090". It shall shall have an inside diameter of 0.490". The fitting shall be constructed of UV-resistant,thermoplastic material. The Swing Joint shall have an operating pressure rating of 5.5 bar at 430. Harit/Aqua/K-Rain
570
71820
126
... More
Providing & Fixing of 3/4" One piece Brass QCV. It has auto close lid made of heavy duty rubber when QCV is not in use, one piece construction, having stainless steel spring, brass valves. Harit/Aqua/Rain Spa
65
61100
940
... More
Providing & Fixing of 3/4" Brass QCV Key with handle with 3/4" outlet. Harit/Aqua/Rain Spa
25
10025
401
... More
Providing & Fixing of 3/4" Brass QCV Key Brass swivel elbow. Harit/Aqua/Rain Spa
25
13175
527
... More
Providing & Fixing of Metallic Service Saddle 90 mm X 3/4"
65
19630
302
... More
Providing & Fixing of PP Service Saddle of 3/4" and1/2". Harit/Aqua/Rainson
1034
130284
126
... More
Providing & Fixing of 3.0" Butterfly Valve for Head Unit. It shall be with integral synthetic rubber lining. It shall be lever operated quarter turn and offers bi-directional smooth operation. The hydraulic body test pressure of the cast iron buffer type Butterfly Valve is 15 bar and hydraulic seat test pressure of the product is 11 bar. Harit/Aqua/Sant
2
12462
6231
... More
Providing & Fixing of Valve box 20" Rectangular Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. K-Rain/HIT/Rainspa
48
156240
3255
... More
Providing & Fixing of Valve box 6" Round Valve Box with cover. The valve boxes shall be high strength, high density polyethylene constructed material. It should be UV stabilizer with anti oxidants, resistant to moisture. K-Rain/HIT/Rainspa
75
31050
414
... More
Providing & Fixing of Brass Quick Pressure relief valve size 2" along with bypass arrangement, cover & necessary fittings. It shall be adjustable Pressure setting from 22 PSI - 120 PSI for maximize performance. It should be high strength cast Aluminum body, Stainless Steel shaft offer, strength and corrosion resistant. Oil tempered coil spring provides quick response for individual pressure range. Harit/Aqua/Armas
1
15750
15750
... More
Providing & Fixing of a double acting Continuous Air release valve 2" made of Aluminum. The Continuous Air release valve shall be capable of both releasing and admitting air from and into the line during system operation. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars. Harit/Aqua/Armas
1
2761
2761
... More
Providing & Fixing of a double acting plastic Air release valve 2" made of high strength plastic with fiber glass reinforced . The Air release valve shall be capable of both releasing and admitting air from and into the line. The working pressure shall be 10 Bars and testing pressure shall be 16 Bars. Harit/Aqua/Armas
10
7350
735
... More
Providing & Fixing of Automatic Disc filter (120 mesh) 50m3 /hr having an inlet & two outlets connections of 3", 2 pressure gauze ports of 3/4" ,a helix made of fiber glass reinforce polyamide at base of disc filter cartridge to create a helical effect in the incoming water ,spinning particulate in suspension away from the filtering element and so minimizing cleanings frequency ,3/4" outlet for flushing at bottom of filter & maximum working pressure of 14 bars. It shall be adjusted on real time based or the pressure difference based. Harit/Aqua/Armas
1
446250
446250
... More
Providing & Fixing of Pressure Gauge (Glycerine filled and stainless steel body). Harit/Aqua/Armas
2
944
472
... More
Providing & Fixing of 3" BSP Solenoid Made Nylon Glass Filled with flow control which shall be normally closed 24 VAC 50/60 cycle solenoid actuated angle pattern design. The valve pressure rating shall not be less than 12 bar. The valve body shall be constructed of high-impact, weather-resistant Nylon Glass Filled with heavy duty diaphragm and stainless steel screws, fasteners and components. The valve shall have manual open/close control (internal bleed) for manual opening and closing of valve without electrically energizing the solenoid, manual bleed can be removed for " tamper proof" operation. The valve shall operate with minimum 24 VAC at 12.0 bar. The valve must open or close in less than 1 minute at 10.5 bar, and less than 30 seconds at 0.7 bar. The valve construction shall provide for all internal parts to be removable from the top of the valve without disturbing the valve installation. K-Rain USA/Rainspa, Italy/HIT USA
46
333270
7245
... More
Providing & Fixing of Logic Plus Controller with two wire Decoder Based technology( 128 Station) having six programs with six start times per program with run time per station 0-10 hrs and irrigation water budget by program 0-250%, capable of running two program simultaneously with two nos. of maximum valves plus master valve running simultaneously and should have rain sensor capability.K-Rain USA/Rainspa, Italy/HIT USA
1
306600
306600
... More
Providing & Fixing of Logic plus Decoder (Receiver) .K-Rain USA/Rainspa, Italy/HIT USA
47
542850
11550
... More
Providing & Fixing of Surge Protection unit. K-Rain USA/Rainspa, Italy/HIT USA
10
66150
6615
... More
Providing & Fixing Earthing rod of copper 2 meter length for surge protection unit. K-Rain USA/Rainspa, Italy/HIT USA
10
73500
7350
... More
Providing & Fixing of DBR Connectors. It shall be pre filled, low voltage, dry splice, Direct Bury, water proof wire connector that protect electrical connection from corrosion and moisture. Each splice Kit contains Two wire nuts, water proof, Gel- filled housing and 1 dual splice organizer. K-Rain USA/Rainspa, Italy/HIT USA
200
44000
220
... More
Providing & Fixing of Pump Start Relay. Pla/Siemens/ Havels
2
2046
1023
... More
Providing & Fixing of enclosure for electrical equipment duly powder coated with complying to IP 55.
2
18900
9450
... More
Providing & Fixing of 2.5 mm2 double core copper conductor cable 24 volt. Empire/Finolex/Plaza
2000
73500
36.75
... More
Providing & Fixing of Conduit Pipe 20mm dia for laying of electric wires. AKG/Supreme/Finolex
2200
57200
26
... More
Providing & Fixing of Booster Pump Capable of Discharging 6lps at 78mtr Head with Control Panel having ammeter, voltmeter, single phase preventer, and all necessary protections , Foot Valve, Non Return Valve, Suction and Delivery assembly Kirloskar/Crompton/CRI
2
252000
126000
... More
Providing & Fixing of Water Level Sensor. Automat/L&T/Siemans
2
13650
6825
... More
Supply and fixing RO system 1000 per hours capacity
1
250000
250000
... More
SITC of 1000 litre Chiller plant including storage tank of 1000 litre
1
153300
153300
... More
ELECTRICAL WORK ( Internal and External)WIRING SYSTEMWiring point for light with in PVC conduit with 1.5 sq.
mm.FRLSH PVC insulated multistrand copper conductor
cable as earthwire drawn inside partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash.
214
130540
610
... More
Wiring point for two ways light in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire , GP Box and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phanolic laminated backelite sheet etc., complete in all respect, as directed, including matching colour wash.
12
9492
791
... More
Wiring point for fan / fresh air fan (light duty exhaust fan) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash.
15
10065
671
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5 metre including supply of 3mm thick G.I. rod 19mm dia. Duly painted complete in all respects.
14
1960
140
... More
Supply and fixing of fan hook fabricated M.S. rod for ceiling fan each.
14
1890
135
... More
Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.
14
7238
517
... More
Wiring point for plug in PVC conduit with 1.5 sq.
mm.FRLSH PVC insulated multistrand copper conductor
cable as earthwire drawn inside the conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with14 SWG copper earth continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash
273
89271
327
... More
Wiring point for call bell in PVC conduit with 1.5 sq.
mm.FRLSH PVC insulated multistrand copper conductor
cable as earthwire drawn inside the conduit. partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting complete with 14 SWG copper earth continuity wire GP Box and piano type bell push or 2 pin socket etc, complete in all respect including matching colour wash.
2
1144
572
... More
POWER POINTS : Supply and wiring of 3 number 4 sq. mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 25 mm dia heavy duty (2 mm thick) PVC conduit with 2 nos 2.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit concealed in wall with two number 14 SWG copper earth continuity wire, including matching colour wash etc, complete in all respect.
860
196940
229
... More
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.
22
13750
625
... More
Add for light / fan points with modular type switch in place of piano type switch.
176
7744
44
... More
Add for 2 way light point with modular switches in place of piano type switches
14
2310
165
... More
Add for plug point with modular switch & socket in place of piano type switch & socket.
33
2739
83
... More
Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch.
6
282
47
... More
Add for Call bell point with modular type bell push in place of piano type bell push.
2
160
80
... More
Same as in item 148, but 25mm dia 2 mm thick PVC
conduit.
550
39600
72
... More
Same as in item 148, but 32 mm dia PVC conduit.
140
12180
87
... More
Same as in item 148, but 40 mm dia (2.0 mm) thick P V
C conduit.
50
5700
114
... More
Same as in item 148, but 50 mm dia (2.0 mm) thick P V
C conduit.
50
7950
159
... More
Wiring of Submains with copper cable using existing steel conduit . Same as in item no. 289 but with 3 nos. 4 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
10
1140
114
... More
Same as in item no. 289 but with 3 nos. 6 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
60
10140
169
... More
Same as in item no. 289 but with 3 nos. 10 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
50
12600
252
... More
Same as in item no. 289 but with 4 nos. 6 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
10
2240
224
... More
Same as in item no. 289 but with 4 nos. 10 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
20
6680
334
... More
Same as in item no. 289 but with 4 nos. 16 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
30
15540
518
... More
Same as in itme no. 289 but with 2 nos. 6 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
10
1140
114
... More
Same as in itme no. 289 but with 2 nos. 10 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
20
3380
169
... More
Same as in itme no. 289 but with 2 nos. 16 sq. mm. FRLSH PVC insulated multistrand copper conductor cable.
30
7860
262
... More
Supply and fixing of G.P. Modular switch box for 1 / 2 Module of approved make made up of 1.0 mm thick ISI Marked G.P.sheet including adjestable Nakka and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes should be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed& brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge.Same as in item no 1152 (A) but for 3 Module
6
690
115
... More
Same as in item no 1152 (A) but for 3 Module
77
9240
120
... More
Same as in item no 1152 (A) but for 4 Module
9
1170
130
... More
Same as in item no 1152 (A) but for 6 Module
4
580
145
... More
Same as in item no 1152 (A) but for 8 Module
3
525
175
... More
SSame as in item no 1152 (A) but for 12 Module
2
400
200
... More
Same as in item no 1152 (A) but for16 Module
1
210
210
... More
Same as in item no 1152 (A) but for 18 Module
2
520
260
... More
WIRING FOR TELEPHONE & TV SYSTEM Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
60
1260
21
... More
4 Pair
1250
33125
26.5
... More
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
30
954
31.8
... More
Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
4
508
127
... More
TV antenna socket outlet
1
127
127
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, armored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 10 Pair
1500
174000
116
... More
20 Pair , 50 Pair
1800
246600
137
... More
Supply installation and testing and commissioning of follwing size of Telephone distribution board in a M.S. box with hinged cover/ door complete with krone type tag block with double jumpering facility mounted on a bakelite sheet etc. including terminations of cable as required. 10 Pair telephone distribution board 20 Pair telephone distribution board , 50 Pair telephone distribution board
1
243
243
... More
Supply and laying of coaxial cable RG-59 in existing conduit complete as required.
50
1650
33
... More
Supply, erection, testing & commissioning of following sizes of splitters of aluminium die cast body. 6 Way
2
296
148
... More
Supply and fixing of following modular switch socket on the existing modular plate & switch box including connection but excluding modular plate and Modular box etc as required. 32 Amp DP Switch
1
381
381
... More
25 Amp Socket Outlet
1
583
583
... More
Supply and fixing of universal shaver socket unit (vertical) with dual voltage sockets (230 Volts & 110 Volts), inbuilt Isolation transformer with safety overload protection with reset feature, auotmatic switch ON/OFF on inserting / removal of plug, indicating light for power ON status with safety shutters complete with Modular base and cover plate and GI Box.
2
3816
1908
... More
LIGHT FIXTURES & FANS Erection and testing of exhaust fan on the existing whole suitable size of rag bolts, nuts and washers etc. complete in all respects.
6
1170
195
... More
Making hole in the wall for exhaust fan and finishing properly complete in all respects.
6
2250
375
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT - AAA
20
23800
1190
... More
Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect.
20
52000
2600
... More
Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. CAT - AAA
12
16800
1400
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT - AAA
88
118800
1350
... More
Supply, of wall/ceiling mounted ultraslim linear batten fixture (600mm length approx), polycarbonate housing in white powder coated finish ,polycarbonate diffuser in opal finish with integral electronic driver ,IP-20, PF0.9, THD20%, rated life of L-70@ 50,000 hours having minimum lumen output of 900 Lumens and efficacy better than 120 Lumens / watt with CRI 80 including making suitable arrengement for fixing on wall/ceiling & connection with 3x1.5 Sq.mm. PVC insulated FRLS PVC sheathed copper conductor in flexible GI conduit etc. as required.
150
120750
805
... More
Supply of following sizes of ceiling fan without regulator complete with double pole bearing motor,blades,down rod,canopy,capacitor etc. as required. 900 mm Sweep. (5 Star Rating)
2
2034
1017
... More
1200 mm Sweep. (5 Star Rating)
8
10176
1272
... More
Supply of following sizes of Havey duty Exhaust fan with Louver suitable for operation on single phase 230 Volt AC 50 Hz supply complete with all fixing accessories as required. 300 mm Sweep (900 RPM)
4
4408
1102
... More
Supply, installation, testing and commissioning of cabin fans of 1350RM made of high quality engineering plastic complete with all accessories as required in the following sizes :- 400 mm Sweep.
6
8646
1441
... More
L T & HT CABLE SYSTEM Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 2 core
3000
828000
276
... More
10 sq. mm 2 core
2000
584000
292
... More
6 sq. mm 4 core
3000
891000
297
... More
10 sq. mm 4 core
1500
490500
327
... More
16 sq. mm 4 core
50
17150
343
... More
25 sq. mm 3-1/2 core
20
7460
373
... More
35 sq. mm 3-1/2 core
30
12660
422
... More
50 sq. mm 3-1/2 core
10
4920
492
... More
70 sq. mm 3-1/2 core
10
6130
613
... More
95 sq. mm 3-1/2 core
20
14000
700
... More
120 sq. mm 3-1/2 core
20
16480
824
... More
150 sq. mm 3-1/2 core
50
47850
957
... More
185 sq. mm 3-1/2 core
100
114000
1140
... More
240 sq. mm 3-1/2 core
50
68950
1379
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 6 sq. mm 2 core
200
15200
76
... More
10 sq. mm 2 core
160
12800
80
... More
6 sq. mm 4 core
300
24000
80
... More
10 sq. mm 4 core
400
34800
87
... More
16 sq. mm 4 core
20
1740
87
... More
25 sq. mm 3-1/2 core
10
1230
123
... More
35 sq. mm 3-1/2 core
4
712
178
... More
50 sq. mm 3-1/2 core
2
356
178
... More
70 sq. mm 3-1/2 core
2
398
199
... More
95 sq. mm 3-1/2 core
4
888
222
... More
120 sq. mm 3-1/2 core
2
486
243
... More
150 sq. mm 3-1/2 core
4
1220
305
... More
185 sq. mm 3-1/2 core
2
794
397
... More
240 sq. mm 3-1/2 core
6
2838
473
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 6 sq. mm
1600
28800
18
... More
10 sq. mm
1920
38400
20
... More
16 sq. mm
80
1680
21
... More
25 sq. mm
40
1080
27
... More
35 sq. mm
16
496
31
... More
50 sq. mm
8
384
48
... More
70 sq. mm
8
536
67
... More
95 sq. mm
16
1408
88
... More
120 sq. mm
8
936
117
... More
150 sq. mm
16
2336
146
... More
185 sq. mm
8
1544
193
... More
240 sq. mm
24
6528
272
... More
Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc 120 sq. mm
100
148000
1480
... More
Providing & Fixing GI pipes complete with GI fittings and clamps, i/c cutting and making good the walls etc. Internal work- Exposed on wall 50 mm dia. Nominal bore
100
65000
650
... More
EARTHING SYSTEMSupply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
4
16304
4076
... More
Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.
6
32280
5380
... More
Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect.
4
41800
10450
... More
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
100
9000
90
... More
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
50
7500
150
... More
Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect.
50
55500
1110
... More
Supply and fixing of testing joint of G.I. strip 32mm x 6mm and 150mm long with G.I. bolts and nut etc. complete in all respect.
10
650
65
... More
Supply and fixing of testing joint of copper strip 32mm x 6mm and 150mm long with tinned of brass bolts and nut etc. complete in all respect.
24
6000
250
... More
Same as PS 721 but with two number 8 SWG G.I. wire
471
98910
210
... More
SAFETY EQUIPMENT Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules.
2
170
85
... More
Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
1
7860
7860
... More
Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
1
9100
9100
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
1
11980
11980
... More
Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.
1
490
490
... More
Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.
2
610
305
... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.
4
10200
2550
... More
DISTRIBUTION BOARDS S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.
1
5210
5210
... More
S & F surface/Flush mounting 6ways V TPN distribution board without additional Door without MCB complete in all respect,as directed at site by Engineer in charge. CAT 6
1
4370
4370
... More
S & F surface/Flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect, as Direct by Engineer in Charge.
4
9000
2250
... More
S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. CAT A
9
17100
1900
... More
S & F surface/Flush mounting 4ways V TPN distribution board with additional Door without DPX3 160 MCCB complete in all respect, as directed at site by Engineer in charge. CAT A
1
10550
10550
... More
S & F surface/Flush mounting 8ways V TPN distribution board with additional Door without DPX3 160 MCCB complete in all respect, as directed at site by Engineer in charge.
1
13130
13130
... More
S&F of 40 Amp. DP MCB (10 KA) C Curve - CAT A
43
50740
1180
... More
S&F of 63 Amp. DP MCB (10 KA) C Curve - CAT A
2
2360
1180
... More
S&F and making connection of 40A 2 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.
15
34200
2280
... More
S&F and making connection of 63A 2 pole 30mA ELCB/RCCB of Din Rail Mounting complete in all respect as per direction and satisfaction to the Engineer in charge.
3
8850
2950
... More
S&F of 40 Amp. 4 pole MCB (10 KA) - CAT A
1
2275
2275
... More
S&F of 63 Amp. 4 pole MCB (10 KA) - CAT A
1
2290
2290
... More
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT A
110
28600
260
... More
S&F of 6 Amp to 32 Amp. TPMCB (10 KA) C Curve CAT A
12
14280
1190
... More
S&F single pole MCB blanking plate
26
650
25
... More
Less 5% as per Govt. Approoval
0.05
-16255398
325107970.49
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements