Mathura Vrindavan Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Mathura Vrindavan Development Authority - MVDA Tender
Civil And Construction
Eprocure
Opening Date8 Nov 2023
Closing Date22 Nov 2023
Tender Amount₹ 19,34,92,000
Costs
EMD
₹ 98,74,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UPMVD_860632_1Bid Award Id
ViewTender No
23/MVDA/2023-24Tender Authority
Mathura Vrindavan Development Authority ViewPurchaser Address
-Website
http://https://mvda.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
PCC WORK Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
253
1404150
5550
... More
REINFORCEMENT CEMENT CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum
576
4371840
7590
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum
5503
45674900
8300
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, including the cost of centering, shuttering, finishing and excluding reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).
40
352000
8800
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete.
9559
1911800
200
... More
SHUTTERING WORK Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
883
164238
186
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
18628
8997324
483
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
2572.6
1065056
414
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
2665
1185925
445
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.Centering and shuttering including strutting, propping etc. and removal of form for
1525
541375
355
... More
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide
1434.92
169320
118
... More
REINFORCEMENT & MS WORK Reinforcement of Reinforced concrete or reinforced brick work brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level etc complete as per MoRT&H Specifications 12.40 (1600)
7155.87
63365228
8855
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
5524
607640
110
... More
BRICK WORK Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
3
16800
5600
... More
Class-150 (non Modular) brick work but in in 1:4 cement and coarse sand mortar super structure above plinth level upto floor five level (upto five stories) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cm.
1147
6939350
6050
... More
Brick work with modular calcium silicate bricks machine moulded conforming to IS:4139, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:4 (1 cement : 4 coarse sand)
411
1947507
4738.46
... More
FINISHING WORK 12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
6290
1195100
190
... More
15mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
6290
1289450
205
... More
6mm Celling plaster 1:3 (1 cement: 3 fine sand) cement & fine sand in F.M. not less than 1.25, 1:3 including chiping of RCC surface before ceiling plaster. The cost of including all material, labour T&P and scafolding etc. complete
17228
2584200
150
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. including curing and cost of all material, labour, T&P etc. required for proper completion of work.
28559
3712670
130
... More
Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-incharge (payment for providing grooves shall be made separately).
2303
1473920
640
... More
Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : 15 mm wide and 15 mm deep groove
1182
40188
34
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all Material and T&P required for proper completion of work.
2388
334320
140
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer including supply of all Material and T&P required for proper completion of work
28559
2855900
100
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work including supply of all Material and T&P required for proper completion of work. Wood & steel.
379
30320
80
... More
FLOORING WORK Providing and laying Vertified Tiles in floor without lean concrete of 600x600mm sizes (thickness 10mm) with water absorption less than 0.08% and confirming to IS: 15622, of approved brand manufacture, in desired colour and shades, laid with cement Based high polymer modified quit set tile adhesive (water Based) confirming to IS :15477, including grouting of joints
3071
3224550
1050
... More
Providing and laying Vertified Tiles in floor of 600x600mm (anti skid tile) sizes (thickness 10mm) with water absorption less than 0.08% and confirming to IS: 15622, of approved brand manufacture, in desired colour and shades, laid with cement based high polymer modified quit set tile adhesive (water Based) confirming to IS :15477, including grouting of joints.
452
497200
1100
... More
Providing and fixing 1st quality ceramic glazed Wall tiles confirming to IS: 15622 (thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skerting, riser of step and dados over 12 mm thick bed of cement mortar 1:3 (1 Cement :3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete
1249
849320
680
... More
Black Granite or other Colour polished stone flooring with 18mm thick marble stone as per sample of marble approved by Engineer-in-charge, over 20mm (average) thick base of cement Mortar 1:4 (1 Cement :4 coarse sand) laid and jointed with grey cement slurry, including rubbing and poilishing complcte with : Black granite stone quality
47
183300
3900
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite work)
93
21669
233
... More
Kota Stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing cmplete with base cement mortar 1:4 (1 cement: 4 Coarse sand) 25mm thick
1507
2034450
1350
... More
Kota Stone slab 20mm thick in riser of steps, skerting, dado and piller laid on 12 mm (average) thick Cement mortar 1:3 (1 Cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing polishing complete.
204
204000
1000
... More
S/F Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
245
200900
820
... More
DOOR AND WINDOW Providing and fixing ISI marked flush door shuttrs conforming to IS : 2202 (Part-1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veenering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws, steel handles sliding bolt, door stopper and tower bolt. (35 mm thick)
281
477700
1700
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
562
314720
560
... More
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
233
74560
320
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap
insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.
75
150750
2010
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.
90
54000
600
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm
306
26010
85
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
137
7535
55
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm
137
15755
115
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)
10
60150
6015
... More
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension . (Area of window above 1.75 sqm upto 2.50 sqm).
17
104550
6150
... More
Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wiremesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness o2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of windowabove 1.75 sqm).
133
1024100
7700
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness
112
107520
960
... More
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture withmatching wood beading
47
47000
1000
... More
ROOF WORK Providing and laying integral cement base water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab adjoining wall upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining heights upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of propoer curing applying a second of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed water proofing compound conforming to IS 2645 and approved by Engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test . All above operations to be done in order and as directed and specified by the Engineer-in-charge with average thickness of 120 mm and minimum thickness at khurra as 86mm
2756
3252080
1180
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound onforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.per sqm of area (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm)
300
156600
522
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
225
39375
175
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete.
12
2580
215
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter.
180
70200
390
... More
PLUMBING WORK Providing and fixing water closet squatting pan (Europen type W.C. pan ISI mark) with seat and lid 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS :7231, with all fitting and fixtures complete, including cutting and making good the walls and floors wherever required. white vitreous china orissa pattern W.C. pan of size 580x440mm with integral type foot rests including stop cock complete in all respect.
15
55500
3700
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
15
56250
3750
... More
Providing and fixing wash Basin (ISI mark) with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White vitreous china chine wash Basin size (630X450) mm with single 15mm cp brass pillar tap. (item no.- 3b/24)
10
20000
2000
... More
P/f flexible waste pipe 40mm dia S.I no 8 b ch-24
33
2475
75
... More
P/f 100x75mm/ 100 mm dia PVC nehani trap 1369
41
1230
30
... More
P/f Stainlessb Steel jali of 100x100mm sqm / 100 mm dia ch-23/30
41
1435
35
... More
Providing & fixing P.V.C. pipe Confirming to IS make working pressure 6kg/sqcm including testing labour T&P and all complete fittings 110mm dia
250
112500
450
... More
90mm dia
250
90000
360
... More
Providing and fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threded fittings including fixing with clamps at 1m spacing. This includes jointing of pipes and fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the wall etc. 20 mm dia (iner fitting)
200
80000
400
... More
32mm dia (outer fitting)
200
120000
600
... More
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). S.I No 23.15 32mm dia 32mm dia
10
5500
550
... More
Providing and fixing C.P. brass bib cock of approved quality Confirming to IS 8931 :- 15mm nominal bore
30
12000
400
... More
Providing and fixing C.P. brass long nose bib cock of approved quality and Confirming to IS standerds and weighing not less than 810gms:- 15mm nominal bore
30
18000
600
... More
Providing and fixing C.P. brass stop cock (Concealed) of standerd design and of approved make confirming to IS8931:- 15mm nominal bore
10
5700
570
... More
Providing and fixing C.P. brass shower, rose with 15 or 20 mm intel: ii) 50mm diametre
25
3000
120
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 500 x 700 mm internal dimension 45 cm deep for pipe line with one or two inlets : with common burnt clay F.P.S. (non modular bricks of class designation M-150, total weight of cover with frame to be not less than 38kg ( weight of cover 23 kg and weight of frame 15kg), RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregaet 40 mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design.
8
44400
5550
... More
S/F Water storage tank P.V.C syntax or equivalent make including float value, connecting Rod of brass, etc all complete. Ch.-19/2
10000
100000
10
... More
P/f mirror of superior glass and of rectangle 453 x357mm in size with plastic moulded frame of approved make and shade with 6mm thick hard board Backing . As item no 24.23
10
7000
700
... More
Providing and fixing C.P. brass angle valve for Basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
25
14750
590
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and
making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
3
18150
6050
... More
Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern
7
83405
11915
... More
PART- B ELECTRICAL WORK Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash.
220
178200
810
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
500
355500
711
... More
Wiring point for two ways light with 1.5 sq. mm. F.R. PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire , GP Box and two number two way piano type switches & ceiling rose / angle / batten holder on 3 mm thick phanolic laminated backelite sheet etc., complete in all respect, as directed, including matching colour wash.
7
6902
986
... More
Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash.
165
149160
904
... More
Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with14 SWG copper earth continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash.
90
37980
422
... More
Wiring point for exhaust fan with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , 15A piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect including matching colour wash.
28
31304
1118
... More
Same as in item 148, but 25mm dia 16 SWG (1.5 mm) thick rigid steel conduit.
275
42900
156
... More
Same as in item 174(B) but for plug point with 5 Amp flush type switch and 3 pin socket and earth continuity wire of 1.5 sq.mm. FRLSH PVC insulated multi strand copper conductor cable.
6
1128
188
... More
Add for light / fan points with modular type switch in place of piano type switch.
385
16940
44
... More
Add for 2 way light point with modular switches in place of piano type switches.
7
1155
165
... More
Add for plug point with modular switch & socket in place of piano type switch & socket.
280
23240
83
... More
Add for HPMV/Exhaust fan point with modular type switch in place of piano type switch.
29
1363
47
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections butexcluding modular plate etc. as required Telephone socket outlet
7
728
104
... More
TV socket outlet
5
520
104
... More
SITC of RJ 45 dta socket outlet with shutter.
12
4404
367
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75mmX75mm)
23
4232
184
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
1883
431207
229
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
2 Pair
165
4125
25
... More
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
1 run of cable
340
14280
42
... More
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly laid in slab alongwith reinforcement before concreting and partly concealed in wall, with one no. 14 SWG copper earth continuity wire etc, complete in all respects including matching colour wash.
1100
220000
200
... More
Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect.
3450
762450
221
... More
Supply and wiring of submain with two number 6 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core aluminium conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respect.
550
140800
256
... More
Supply and wiring of 4 number 10 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 32 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with two number 10 SWG copper earth continuity wire including matching colour wash etc, complete in all respect.
550
350350
637
... More
Supply and wiring of 4 number 16 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 40 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with two number 10 SWG copper earth continuity wire including matching colour wash etc, complete in all respect.
550
508200
924
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA
110
84700
770
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT- AAA
110
148500
1350
... More
Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT- AAA
16
78080
4880
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect..CAT- AAA
240
285600
1190
... More
Supply and fixing of LED Tube Light with batten suitable for up to 2 X 22 watt LED tube light fitting including tube on Surface complete in all respect.CAT- AAA
70
125300
1790
... More
Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect. CAT- AAA
11
15400
1400
... More
Supply of ceiling fan with fan motor of AC permanent insulation capacitor confirming 5 star rating and IS 374/79 and also comply with IS 1709/1984 with latest amendment. The rated voltage 220/240volts 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball bearing system.
BEE 5 Star rated-1200mm sweep.
165
297000
1800
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core
200
68600
343
... More
35 sq. mm 3.5 core
33
13926
422
... More
95 sq. mm 3.5 core
55
38500
700
... More
240 sq. mm 3.5 core
180
248220
1379
... More
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 16 sq. mm 4 core
7
609
87
... More
35 sq. mm 3.5 core
2
356
178
... More
95 sq. mm 3.5 core
2
444
222
... More
240 sq. mm 3.5 core
5
2365
473
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16 sq. mm
28
588
21
... More
35 sq. mm
7
217
31
... More
50 sq. mm
2
96
48
... More
120 sq. mm
5
585
117
... More
240 sq. mm
13
3536
272
... More
Supply and burring of Safe Earthing Electrode T-19, (HotDip Galvanized), Length up to 3000mm, outer Dia 50mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipeof 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixtureof retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switchboard, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonryhousing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
5
50200
10040
... More
Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
165
14850
90
... More
S&F surface/flush mounting 8ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. Cat-A
22
41800
1900
... More
S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. Cat-A
11
39710
3610
... More
S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. Cat-A
11
57310
5210
... More
S & F surface/Flush mounting 6ways V TPN distribution board with additional Door without DPX3 160 MCCB complete in all respect,as directed at site by Engineer in charge. Cat-A
11
131780
11980
... More
S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve Cat-A
45
33300
740
... More
S&F of 6 Amp. to 32 Amp. 4 pole MCB (10 KA) C Curve Cat-A
22
35200
1600
... More
S&F of 40 Amp. 4 pole MCB (10 KA) C Curve Cat-A
44
78320
1780
... More
S&F of 63 Amp. 3 pole MCB (10 KA) C Curve Cat-A
22
39380
1790
... More
S&F of 63 Amp. 4 pole MCB (10 KA) C Curve Cat-A
6
13740
2290
... More
S&F of 100 Amp 4 pole MCCB (25 KA) Thermal Magnetic release
2
16280
8140
... More
S&F of 160 Amp 4 pole MCCB (25 KA) Thermal Magnetic release
2
25320
12660
... More
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A
550
143000
260
... More
Erection and testing of ceiling fan and regulator for room height upto 3.5 metres including supply of 3mm thick G.I.Pipe19mm dia. Duly painted, complete in all respect.
165
23100
140
... More
Supply and fixing of 16 SWG M.S. drum with luvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.
43
50740
1180
... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.
6
15300
2550
... More
Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work.
195
121875
625
... More
Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.
165
24750
150
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
16
8608
538
... More
Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.
165
85305
517
... More
Supplying and installing following size of perforated painted
with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 300 mm width X 50 mm depth X 1.6 mm thickness
33
18678
566
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 300 mm dia
22
16852
766
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal)
22
8976
408
... More
Supply of Totally enclosed exhaust fan, 300mm sweep continously rated highly efficient heavy-dutymotor similar to Crompton Cat. Ref. Trans Air 12" or equivalent.
5
10445
2089
... More
Supply of Totally enclosed exhaust fan, 400mm sweep continously rated highly efficient heavy-dutymotor similar to Crompton Cat. Ref. Trans Air 16" or equivalent.
28
140980
5035
... More
Supply Of 450mm sweep wall fan.
1
4600
4600
... More
3 Phase Input & 3 Phase Output 5KVA UPS Supply, installation, testing, and commissioning of UPS system with following features 1. High freq. PWM inverter using IGBT 2. Manual bypass switch 3. 80 Character Alpha Numeric LCD display with
4. Inbuilt Isolation
5. SMF batteries to provide approx. 30 min backup time on IT load alongwith battery rack
1
208923
208923.3
... More
CCTV Work. Supplying, installation, testing & commissioning of 3Mpx Indoor dome 2048 x 1536 at 30fps, Autofocus Motorized remote zoom lens 2.88 mm. H.265/H.264 compression, 40 mtr Adaptive IR, 120dB. Minimum Illuminator @F1.4 0.13 lux color; 0.01 lux Mono, 3D noise filtering, Bi directional Full Duplex Audio, inbuilt mic, 1 Alarm In, 1 Alarm out, 3 independant stream, 8nos of configurable privacy mask, Supported protocol TCP/IP, 1pv4 & IPv6,UDP/IP, DNS, DDNS,ARP, ICMP, IGMP, RTCP, SFTP, SIP, TLS/TTLS, ARP.802.1x (EAP-MD5, EAP-TLS, EAP-TTLS, EAP-PEAP and EAP-FAST). Edge based analytics -Object Counting. Adaptive Motion, Object Removal, Motion Detection, Camera Sabotage, Audio Detection, and Directional Motion. Camera shall features of Corridor mode, Mirror mode, having SD card provision of 128 GB, Operating temperature -10 to +50 deg C,IP64 IK10,Works on PoE+,ONVIF profile S,G & T.Cybersecrutiy Cert:UL/NDAA, CE EN 55032 (Class A), EN 50130-4, EN 60950-1,FCC (Class A) 47 CFR Part 15,UL and CUL Listed UL 60950-1, CAN/CSA-C22.2 No. 60950-1-07, BIS certified to ruggedized performace camera should meet Shock & Vibration Certifcation:IEC 60068:2-6 and 2-27 The Camera to be provided by OEM should not be complying to GB28181, GB/T28181-2011 standards and there should be no option to activate or deactivate GB/T 28181 standards in the camera web page/Settings.( Make: Axis/Pelco/Avigilon/Mobotix/Impluse and all equavelant)
22
969408
44064
... More
Supply, installation, testing and commissioning 12 volt 2 Amp Power Adaptor 12 volt DC with SMPS Power Supply
1
972
972
... More
INDOOR RACK-4 U RACK Supply, Installation, Testing & Commissioning of Wall Mount Side Integrated Economics Riveted 04U-550W 450D- Single Fan Provision - Pastal Fine Tex. ACCESSORIES INCLUED IN EACH RACK ARE:Single Fan For WallMount, Metal Cable Manager-01U-Plastic Cable Loop's Mountable - Black Fine Tex. - Assembly, HARDWARE PKT 20SET,PDU 6A 4SKT SWT PLG A
1
7128
7128
... More
DATA & NETWORKING Switch 8 port Giga port Supply, Installation, Testing & Commissioning ofl.2 switch with 8 x 1G Base T Port PoE+ with 2 x 1G SFP and 2 IG Base T port, The switch must be stackable upto 4 Units, Switching Capacity should be 40 Gbps or more with not less than 35 Mpps Throughput Switch should have 1GB Flash and 1GB RAM The switch must support minimum 16K MAC address entries and 4K
1
19602
19602
... More
ELECTRIC EQUIPMENT Supply, installation, testing and commissioning of Electric Power Cable 2 Mtr.1.5 Sqmm
55
5346
97.2
... More
Supply, installation, testing and commissioning of 3 Pin top (Plug)
1
259
259.2
... More
Supply installation Testing and Commissioing of Video Management Recording servers it should supports upto 128 cameras for future upgradation .It should have Intel® Xeon® Silver 4210 or better with 16 GB DDR4 ECC RAM or better. It should run on Windows® 10 IoT Enterprise 64- bit (LTSB) or latest.lt should have M2. SSD 2 x 480 GB for operating system Shall support Dynamic Host Communication Protocol (DHCP) and Network Time Syncronisation Protocol (NTP) functionality. It shall have Mapping function. It should support RAID6 It should have dual power Supply.It should have in built plugins to integrate third party systems. It shall have 12 HDD slots. Each Box should have Thoughput should be 450 Mbps. "Video Outputs- 4x Mini Display port 1.4, VMS Should support ONVIF SG & Should have NVIDIA Quadro P620 (2 GB memory) Should have 2xGigabit Ethernet (1000Base-T) ports ( Make: Axis/Pelco/Avigilon/Mobotix) Supply installation Testing and Commissioing of Video Management Softwarwe VMS should have smart motion Search for server side motion
1
640035
640035
... More
Supply, installation, testing and commissioning of Harddisk 8 TB Hard disk Nos. should be surveillance 24x7 hour Oprated
2
15552
7776
... More
Supply, installation, testing and commissioning of 55" LED TV LED TV hould be Professional with HDMI nort
1
51840
51840
... More
Supply, installation, testing and commissioning of 5KVA Online UPS (1+1)with 1 Hour Battery Backun Backup
1
97200
97200
... More
Supply, installation, testing and commissioning of CAT 6 Armoured Cables.
220
4950
22.5
... More
Supply, installation, testing and commissioning of Client work Station
1
97200
97200
... More
Supply, installation, testing and commissioning of Video Management Server
1
77760
77760
... More
Supply, installation, testing and commissioning of Network Storage Device
1
226800
226800
... More
Name Of Work - External Lighting Work Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. 120 sq. mm 3 core
110
162800
1480
... More
supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 120 sq. mm
5
59690
11938
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 120 sq. mm
2
32484
16242
... More
Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality.
5
12750
2550
... More
Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.
2
610
305
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
5
59900
11980
... More
Supply and laying of PVC Insulated, FRLS Round Sheathed Multi Core Industrial Flexible Cable conforming to IS 694:2010 with Flexible Bright Annealed Copper Conductor for Voltage Grade 1100 Volts as per direction of engineer incharge. 10CX2.5Sq.mm
110
44550
405
... More
HT Panel, (Main) COMMON AREA SUBSTATION S.I.T.C. of VCB's Indoor Type as per latest specification of UP Power Corporations, make prefered Cromptron,Schneider or any Equivalent make approved by UP Power Corporation. Including construction of Plinth and earthing etc. with all material as per Technical Requirment. with 05 years warranty 11 KV incoming
1
481500
481500
... More
TRANSFORMER Providing, erecting, testing & commissioning approved make oil immersed naturally ONAN cooled, double wound, core type indoor copper wound 11 kV/ 433 Volts Step Down Transformer of following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed system continuously rated for a full temperature rise in oil following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed and On Load Tap Changer continuously rated for a full temperature rise in oil not exceeding 40 deg. C at maximum ambient temp. Of 50 deg. C complete with necessary radiator first filling of new transformer oil & standard fitting as below complying with I.S. 1180 LEVEL 3 standards On load tap changing range steps -10% to 5% on H.V in steps of 2.50% .and L.V. for variation should be provided The H.V. shall be connected delta & secondary with star connection. The transformer should have cable-end boxes on H.T. side & on L.T. side suitable for bus duct or cables as per requirement complete with test certificates from manufacturers. Losses As per IS 1180 LEVEL-2. 1. Coservator with plain oil level gauge and oil drain plug 1nos. 2. Top filter valve 1 Nos.3. Bottom filter-Cum-drain valave 1Nos..4. Rating and diagram plate 1nos.5. Earthing Terminals 2Nos.6. Thermometer pockets 1Nos.7. Lifting Lugs 2/4 Nos.8.Air release plug 2/4 Nos.9. Bi-directional rollers 4Nos.10.Jacking pads 1Nos.11.Presure relese valve 1Nos.12. Separate Bare LV neutral 433V 13. Detachable/Fixed type radiators 1Nos.14. Magnet Oil level gauge15. Oil temperature indicator 1Nos.16. Winding temperature indicator 1Nos.17. Marshlig Box single window 1No.18. Double flot buchholz's relaywith alarm and trip contact COPPER WOUND 250KVA 11/.433V
1
1048500
1048500
... More
GENERATING SETS Supplying, installation, testing and commissioning of DG sets, AMF panel, bus ducting cables from DG sets to essential panel, DG set enclosure room sound insulation/ventilation/smoke exhaust as required, earthing of DG set system, control cabling, fuel tank/piping, DG set exhaust piping/ exhaust chimney as per CPCB norms, civil works connected with DG sets including foundation as required.
120
1080000
9000
... More
INCOMING 630 Amp /415Volt ACB- 1 No OUT GOING 100 Amp.MCCB-5 Nos., & 63 Amp.MCCB-1NoCat. A.Pannel Cubicle Type Cat. B Pannel Cubicle Type
1
557500
557500
... More
EXTERNAL LIGHT FEEDER PILLAR Supply installing testing & commissioning of out door type IP66 with additional canopy street light feeder pillar (Distribution Panel) compartmentalised design, dust tight & vermin proof made out of 14 gauge M.S. sheet, stove powder coated complete as required with following incomming & outgoing as per detail below. Incoming 100 Amp. 10 KA FP MCCB 1 No.Suitable digital contractor and timer for down & dusk 100 Amp. TPN Alu. Bus bar Outgoing 40 Amp. 10KA FP MCB 2 No. 25 Amp. 10KA FP MCB 5 No.
2
182700
91350
... More
6 sq. mm 2 core
330
91080
276
... More
6 sq. mm 4 core
840
249480
297
... More
10 sq. mm 4 core
165
53955
327
... More
16 sq. mm 4 core
165
56595
343
... More
150 sq. mm 3-1/2 core
220
108240
492
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 6 sq. mm 2 core
7
532
76
... More
6 sq. mm 4 core
8
640
80
... More
10 sq. mm 4 core
3
261
87
... More
16 sq. mm 4 core
5
435
87
... More
150 sq. mm 3-1/2 core
8
2440
305
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 6 sq. mm
50
900
18
... More
10 sq. mm
9
180
20
... More
16 sq. mm
18
378
21
... More
70 sq. mm
7
469
67
... More
150 sq. mm
20
2920
146
... More
Supply & fixing of 3 mtr PU Painted Pole of approved make on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
27
415530
15390
... More
Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect. CAT-AAA
27
227070
8410
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. CAT- AAA
39
345150
8850
... More
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
32
528000
16500
... More
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.
4
68400
17100
... More
Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respact CAT- AAA
9
204750
22750
... More
Supply and fixing of 16 mtr High mast Pole of approved make with rising system, hot dip Galvanized inside & outside , having pole sheet thickness 4mm, top dia minimum150mm, bottom dia minimum 360mm, base plate 32mm thick, suitable for wind velocity as per IS 875 part 3 &.having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes,1 HP Power tool motor, 3 point suspension system with steel wire rope 6mm dia , double drum winch. Including making suitable Foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers, anchor plates etc. Complete in all respect as
per direction and satisfaction to the Engineer-in-charge.
1
275000
275000
... More
Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
22
279400
12700
... More
Supply and burring of Safe Earthing Electrode T-39 CuCopper Coated, Length up to 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia12mm, coating 80-100 micron filled with crystallineconductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixtureof retaining capacity along with 30 cm square C.I. framewith hinged cover & masonry housing. (From electrodeterminal to switch board, cost of 25 x 3 Copper Strip willbe extra). Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
5
98750
19750
... More
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.
550
82500
150
... More
Supply and fixing of one number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
550
110000
200
... More
Supplying and installing following size of perforated painted
with powder coating M.S. cable trays with perforation not more
than 17.5%, in convenient sections, joined with connectors,
suspended from the ceiling with M.S. suspenders including bolts
& nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness
110
40700
370
... More
300 mm width X 50 mm depth X 1.6 mm thickness
110
62260
566
... More
450 mm width X 50 mm depth X 2.0 mm thickness
55
48400
880
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 300 mm dia
22
16852
766
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 200 mm dia (OD-200 mm & ID-175 mm nominal)
220
89760
408
... More
PART- C SITE DEVELOPMENT Earth work in excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches.
529
76705
145
... More
PCC WORK Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and floors.
27
149850
5550
... More
REINFORCEMENT CEMENT CONCRETE RCC work Providing and laying in position specified grade of reinforced cement concrete, Including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
114
923400
8100
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing and excluding reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) i) below plinth level
9
74250
8250
... More
ii) Above plinth level upto fifth floor lavel
10
89500
8950
... More
Reinforcement of Reinforced concrete or reinforced brick work brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level etc complete as per MoRT&H Specifications 12.40 (1600) as per Analysis (Make - Tata, Jindal, SAIL)
107
947485
8855
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In grating, frames, guard bar, ladder, railings, brackets, gates and similar work
8455
930050
110
... More
Class-150 (non Modular) brick work but in in 1:4 cement and coarse sand mortar super structure above plinth level upto floor five level (upto five stories) including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cm.
118
713900
6050
... More
12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
510
96900
190
... More
15mm cement plaster with cement mortar in proportion of 1:4 Cement & coarse sand of single coat for interior plastring upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. In girth and finished even and smooth
510
104550
205
... More
Making groove 10 to 12mm wide x 8mm deep in plaster of wall or in ceilling vertically or horizontally as required
387
12384
32
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work including coat of all materials, labour T&P etc. required for proper completion of work. Wood and steel
562
44960
80
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
1020
142800
140
... More
ROAD & PARKING Earth work 5 km cartage in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge
1425
378337
265.5
... More
Extra for Earth work in embankment mechanically compacted to 98% proctor density In ordinary soil, excavation to be done form of regular pits not exceeding 0.5mtr in depth and work in embankment to be in 20cm layer including ramming and dressing pulverization surfacing including Supply of Labour, T&P, Roller and water sprinkler
1425
57000
40
... More
Earth work in excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches
78
11310
145
... More
Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
30
166500
5550
... More
Construction of Granular Sub Base by Providing Granular Material, spreading in uniform layers with Motor Grader on prepared surface, mixing by mix in placed method with Froont & Loader at OMC and compacting with Vibratory Roller to achieve the desired density, complete as per clause 401
1244
3199568
2572
... More
Providing & Laying I shaped (zigzag) Precast interlocking tile of thickness 100mm thick (Comressive strength not less then 30 mpa and weight 4.50 kg) including 25mm thick local sand base leveling and dressing of surface to required level and slope, filling joints with local sand all complete 100mm Rubber molded Grey
3143
3111570
990
... More
100mm Rubber molded Coloured
3143
3237290
1030
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
581
81340
140
... More
SUB HEAD : RAIN WATER HARVESTING WORK Earth work in excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches. 0.0m to 1.50mtr
71
10295
145
... More
Extra Depth 1.50-3.00
69
11730
170
... More
Sand filling in plinth including supply of necessary quantity of local sand and including watering dressing etc. required for proper completion of work.
9
11025
1225
... More
Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
3
16650
5550
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, Slab including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
4
34400
8600
... More
Reinforcement of Reinforced concrete or reinforced brick work brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level etc complete as per MoRT&H Specifications 12.40 (1600)
4
35420
8855
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
49
5390
110
... More
Class M150 (non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work.
40
224000
5600
... More
12mm cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm. In girth and finished even and smooth
147
27930
190
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
150
62850
419
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia
105
57960
552
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
45
25335
563
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
5
12765
2553
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
5
12845
2569
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
5
12015
2403
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
8
9040
1130
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia
3
525
175
... More
NALAH Earth work in excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches.
600
87000
145
... More
Provides & laying cement concrete in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) & curing complete, including cost of form work in foundation and under floors.
20
111000
5550
... More
RCC work Providing and laying in position specified grade of reinforced cement concrete, Including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
40
324000
8100
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, including cost of centering, shuttering, finishing and excluding reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
60
495000
8250
... More
Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shuttering, finishing and excluding reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
30
258000
8600
... More
Reinforcement of Reinforced concrete or reinforced brick work brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its waistage Bend, hooks, Binding wire and authorized over lapping shall be measured upto floor two level etc complete as per MoRT&H Specifications 12.40 (1600) as per Analysis (Make - Tata, Jindal, SAIL)
121
1071455
8855
... More
PART- D FIRE FIGHTING WORK MS "C" Class Pipes & Valves Supply, laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & Supply cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. Make
TATA /SAIL /JINDAL 150 mm dia
80
138160
1727
... More
Supply, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :. Make TATA/SAIL/JINDAL 150 mm dia
100
157000
1570
... More
100 mm dia
83
92877
1119
... More
80 mm dia
83
68641
827
... More
50 mm dia
120
85800
715
... More
32 mm dia
100
36100
361
... More
25 mm dia
120
37680
314
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required Make CASTLE/C&R/ADVANCE/KIRLOSKAR 150 mm
11
75955
6905
... More
80 mm
13
50011
3847
... More
50 mm
6
17442
2907
... More
Supply, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required Make : CASTLE/C&R/ADVANCE/KIRLOSKAR 150 mm
8
115384
14423
... More
80 mm
4
24360
6090
... More
Supply, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.Make : DS ENGG/SANT/EMERALD 150 mm
3
25806
8602
... More
80 mm
1
3626
3626
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel Make - NEW AGE / MINIMAX
6
28734
4789
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Stainless Steel (Grade 304) Make - NEW AGE
6
8148
1358
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required Gun Metal Make NEWAGE/CEASEFIRE/MINIMAX
11
47597
4327
... More
Supplying and fixing first-aid 30 mtr Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. Make EWAGE/CEASEFIRE/MINIMAX
6
39888
6648
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required- 4 WAY 150mm dia Make NEWAGE/CEASEFIRE/MINIMAX
1
11360
11360
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
14759
14759
... More
Fire Pumps Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head
1
66705
66705
... More
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required : (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520.
(b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.
(d) Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 56 m Head
1
274122
274122
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. A- Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. B M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 2280 lpm at 56 m Head
1
506810
506810
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Terrace Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head Electrical Panel Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required MAKE-ALLIED ENGINEERS/MAK ENGINEERS/CPRI APPROVED Incomings
250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A
Outgoings
( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps)
Main Fire Pump
125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
Jockey Pump
63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.
1
70139
70139
... More
Diesel Engine Control
Control for diesel engine comprising -
Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine
System Controller
Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specifications
1
206091
206091
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Make : Rallision/ Polycab/ Gloster/ National/
Universal/ Havells or Equivalent 70 sq. mm 3.5 core from main panel to starter
60
36780
613
... More
25 sq. mm 3.5 core from main panel to starter
90
33570
373
... More
Supply and wiring of submain with two number 2.5 sq. mm FR P.V.C. insulated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty 2mm thick PVC conduit partly concled in wall and partly laid in slab along with Reinforcement before concreting with one no. 14 SWG GI earth contunity wire including colour wash etc. Completed in all Respects. Make : Rallision/ Polycab/ loster/ National/ Universal/ Havells or Equivalent
33
4917
149
... More
Supply & fixing of pressure switch in M.S. pipe line including connection etc. as required.
10
12070
1207
... More
Supply & fixing flow switch in following sizes M.S. pipe including connection etc as required.-100 mm dia
2
11884
5942
... More
Sprinklers Head Supply fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories. Make Newage/Tyco/MINIMAX Pendent type
150
52200
348
... More
upright sprinkler
120
41760
348
... More
Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. 1000mm
150
184950
1233
... More
Supply, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required MAKE- TYCO/MINIMAX/CEASEFIRE. (Pressure etc. to complete the system as required)
1
39707
39707
... More
SITC of fire extinguisher Supply and fixing of fire extinguisher, ABC Type 4.00kg capacity (ISI marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
15
117900
7860
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
9
107820
11980
... More
Supply and fixing of fire bucket, round bottom made of GI sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained amd locked, initially filledwith fine river sand, water as per direction of Engineer-in-charge.
10
4900
490
... More
Supplying, installation, testing & commissioning of Smoke detector complete with mounting base complete as required.
100
95300
953
... More
Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
100
88300
883
... More
Supplying, installation, testing & commissioning response indicator on surface/ recess MS box having two LEDs metallic cover complete with all connections etc. as required.
70
10500
150
... More
Supplying, installation, testing & commissioning of addressable manual call point complete as required.
11
34100
3100
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
11
4983
453
... More
Supplying, installation, testing & commissioning of addresable fire control module complete as required.
6
14232
2372
... More
Supplying, installation, testing & commissioning of fault isolator complete with base as required.
6
16368
2728
... More
Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.
3
3981
1327
... More
Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.
3
14400
4800
... More
Supplying, installation, testing & commissioning of addressable phone control module complete as required.
3
7782
2594
... More
Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.
6
12132
2022
... More
Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Two Loop Panel.
1
200280
200280
... More
Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.
1
90977
90977
... More
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sqmm
1200
85200
71
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the
existing surface/ recessed steel/ PVC conduit as required. 2 Pair
63.14
1767
28
... More
Less 5% on Total Amount As Per Sanction Govt. Order
0.05
10183768
203675377.79
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements