Mathura Vrindavan Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Mathura Vrindavan Development Authority - MVDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date27 Feb 2024
Closing Date11 Mar 2024
Tender Amount₹ 17,83,15,000
Costs
EMD
₹ 91,16,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPMVD_905900_9Bid Award Id
ViewTender No
35/MVDA/2023-24Tender Authority
Mathura Vrindavan Development Authority ViewPurchaser Address
-Website
http://https://mvda.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Of area beyond 3 sq. metres
30
10980
366
... More
Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more.
2718
975762
359
... More
EXCAVATION WORK Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil
9531
1229499
129
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
373
70497
189
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil 1.50 -3.0m
1907
173537
91
... More
3.0-4.50m
1893
172263
91
... More
4.50-6.00m
1893
172263
91
... More
6.00-7.50m
1893
172263
91
... More
Diluting and injecting chemical emulsion for post-constructionai anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With chlorpyriphos/lindane E.c. 20% with 1% concentration
1262
283950
225
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
316
53720
170
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.
1164
165288
142
... More
PCC WORK Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
162
803520
4960
... More
REINFORCEMENT CEMENT CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. concrete of m25 grade with minimum cement content of 330 kg /cum All works upto plinth level Up to Plinth Lvl.
1000
6920000
6920
... More
All works above plinth level upto floor V level concrete of m25 grade with minimum cement content of 330 kg /cum
2488
17861352
7179
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
21
175917
8377
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine
167
1280222
7666
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete.
501
20040
40
... More
Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)
8573
25719
3
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, j ointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making j oints with or without grooves (thickness of j oints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
24
176784
7366
... More
SHUTTERING Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
215
61275
285
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
2203
1539897
699
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
2996
1836548
613
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick
3064
1878232
613
... More
Centering and shuttering including strutting, propping etc. and removal of form for Shelves (cast in situ)
41
27675
675
... More
Centering and shuttering including strutting, propping etc. and removal of form for Weather shed, chajjas, corbels etc., including edges
734
507928
692
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
8269
6185212
748
... More
Centering and shuttering including strutting, propping etc. and removal of form forEdges of slabs and breaks in floors and walls
Under 20 cm wide
1385
209135
151
... More
REINFORCEMENT & MS WORK Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more.
5345
41968940
7852
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
6240
780000
125
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1330
747460
562
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S.
pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)
833
345695
415
... More
BRICK WORK Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar I:4 (l cement : 4 coarse sand)
11
59026
5366
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class deaignation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (l cement : 6 coarse sand)
1111
7365930
6630
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
1251
1023318
818
... More
FINISHING WORK 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
6875
1787500
260
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
5725
1711775
299
... More
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
11036
2405848
218
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
22750
2570750
113
... More
Providing and applying of Heritage GRIT FINISH, a surface texture paint after applying corresponding roller coat brush finish as heritage primer on pre plasterd surface to be smooth level without any undulations,color scheme as per approved sample in approved shade.Grit is a two component system of natural marble chips 25 kg and 5 kg of Bonding agent (100% pure Acryalic emulsion). The composition of texture paint consits of grit, made of natural marble chips,no pigment added matt finish.flame retardant resistance to fungal and algal attacks The first coat (primer )should be applied by brush or wool roller as base coat, diluted with sufficient water and the next coat a final coat to be applied with trowel and properly finished. The thickness of both coat should be 1.00 mm to 1.50 mm.Application to be carried out by company's Authorised Dealer
862
417208
484
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. 30 mm thick
1149
4430544
3856
... More
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated
glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all
complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
862
5963316
6918
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.
2146
1115920
520
... More
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm
3620
159280
44
... More
30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete.
661
1039092
1572
... More
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone
7
76104
10872
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
19877
2683395
135
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
1008
113904
113
... More
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,
T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
778
423232
544
... More
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance
with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
300
45000
150
... More
FLOORING WORK Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
3694
4177914
1131
... More
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match theshade of stone and pointing with same mortar. . Red sand stone.
151
181049
1199
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
64
51072
798
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includingngrouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm
210
223860
1066
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundybottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
886
817778
923
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent
577
1882174
3262
... More
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with and admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade
132
297396
2253
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm
577
2273957
3941
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite work)
82
30504
372
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
35
24920
712
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick
220
311960
1418
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
46
78844
1714
... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality
20
54420
2721
... More
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) :Light shade pigment using white cement
24
26784
1116
... More
DOOR AND WINDOW Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorativetype, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
241
609489
2529
... More
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick
482
314746
653
... More
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.
208
74464
358
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters
67
155239
2317
... More
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
119
74018
622
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
175
8400
48
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
161
8372
52
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm
161
13363
83
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m).
135
864945
6407
... More
Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m)
87
688779
7917
... More
Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50mm & above) & sash (55 mm & above) x (85mm & above) & French (False) mullion (55 mm & above) x (60mm & above). (Height upto 2.5 metre).
83
719361
8667
... More
Fixed window / ventilator without mullion / transom. Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 metre)
29
174145
6005
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
225
246600
1096
... More
With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)
83
101841
1227
... More
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture withmatching wood beading
26
34060
1310
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper
etc.to be paid separately).
12
46524
3877
... More
ROOF WORK Providing and laying integral cement base water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab adjoining wall upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining heights upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of propoer curing applying a second of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed water proofing compound conforming to IS 2645 and approved by Engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test . All above operations to be done in order and as directed and specified by the Engineer-in-charge with average thickness of 120 mm and minimum thickness at khurra as 86mm
1217
1492042
1226
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100
mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
255
142800
560
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm per coat
1373
472312
344
... More
For horizontal surface one coat @1.10 kg per sqm.
1122
296208
264
... More
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
175
38850
222
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete.
8
1736
217
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
128
35072
274
... More
Providing & installing RO having 500 ltr/hp capacity with specifications RO+UV+UF and having TDS reduction upto 90% (TDS upto 3000ppm), double filtration unit and water recovery upto 40-45% all complete as per direction of Engineer in charge.
1
172000
172000
... More
Providing & installing Water chiller tailor with tank of capacity 1000 ltr
1
109000
109000
... More
Supply and fixing of Door lock
3
1770
590
... More
Aluminium Door handle 125mm
10
550
55
... More
S/F MS Fire Door size(1.01 x 2.14) Painted with red colour, Lock etc. Complete as per Engineer Encharge. (Sanction Rate)
4
23360
5840
... More
Providing and fixing looking mirror superior glass Tappered edge ( approved quality) 6 mm thick fixed on SS Spacers on Back Side complete in all respect as per direction of Engineer in- charge. looking Mirror Size( 0.60 M x 0.75M)
10
15000
1500
... More
looking Mirror Size( 0.45 M x 0.60M)
7
8400
1200
... More
S/F 4mm thick Acrylic Transpairent sheet Incuding supply of necessary fifting complete in all respect as per direction of engineer incharge.
53.58
196102
3660
... More
S/F of SS Dispencer (Jaquar/ Plumber make) model no. CHR-35735 Complete in all respect as per direction of engineer incharge.
9
15552
1728
... More
S/F of Toilet Paper holder Jaquar/ Plumber model no. CHR-35753 Complete in all respect as per direction of engineer incharge.
9
15147
1683
... More
S/F Jet Spray G-lite make Complete in all respect as per direction of engineer incharge.
13
4420
340
... More
S/F Urinal Partition Somany make Complete in all respect as per direction of engineer incharge.
5
38050
7610
... More
S/F Towel Rod Jaquar make (600 mm)model no. CHR-1507 Complete in all respect as per direction of engineer incharge.
5
8700
1740
... More
S/F Towel Rod (450 mm) Plumber make model no. CHR-1111BNM Complete in all respect as per direction of engineer incharge.
12
20208
1684
... More
Core cutting in R.C.C work including T&P complete in all Respect 75mm Dia
35
33425
955
... More
Provinding and fixing of Gun metal gate vale 25mm dia (DSR 18.17.1 -2018)
19
7847
413
... More
Extra for Difference between Granite cladding and flooring Rate(4407.80 - 3700) = 707.80 Say 707/-
283.48
200420
707
... More
S/F long body Kitchen bib cock Jaquar (600 mm)model no. CHR-347 Complete in all respect as per direction of engineer incharge. (Quotation Rate)
4
6396
1599
... More
S/F of Fitting (Jaquar/ Plumber make) Complete in all respect as per direction of engineer incharge. (Quotation Rate) Bottale trap
10
16550
1655
... More
Hand Sawar model no. CHR-573
4
5864
1466
... More
Basin mixture model no. CHR-15011
4
17056
4264
... More
Pillar Cock model no.CHR-15001
13
25025
1925
... More
Stop cock model no.CHR-35053
65
92300
1420
... More
Bib cock model no. CHR-35037
17
33660
1980
... More
Proving and fixing in position precast RCC manhole cover and frame of required shape approved quality size 600 x 450 mm DSR- 2018 19.19.1.1
5
5255
1051
... More
Provind and laying Commissioning of 1H.P. submersable pump ISI Mark with Starter Complete in all respect as per direction of Engineer incharge.
2
28000
14000
... More
Providing and fixing of Teak wood doors shutter 85mm thick ornamental pannelled shutter with Carbing including Teak wood frame/ Chaukats size 75mm thick 245 mm width fixed in position with deshfasners of required dia and length and s/s hings of suitable size including 7 coat of melamin polish of both side complete in all respect as per direction of Engineer-in-charge including supplying all material labour T&P etc. required for proper completion .
17.01
714420
42000
... More
Providing and fixing brass Door fifting with lacured polish including labour T&P Complete in all Respect. (Quotation Rate) Door bell
28
11116
397
... More
big round- 4"
16
12800
800
... More
Small round 2"
72
22464
312
... More
Handle 900 mm
4
30720
7680
... More
Handle 600 mm
4
26216
6554
... More
Sliding rod 610 mm
2
13820
6910
... More
Aldrop 24 "
2
2256
1128
... More
Aldrop 18 "
2
1730
865
... More
Door Stoper
4
1656
414
... More
Ms Door Stoper
2
1140
570
... More
Ms Door lock
2
4680
2340
... More
PLUMBING WORK Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
32
151808
4744
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
8
39416
4927
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P.brass pillar tap
35
56735
1621
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia
53
4611
87
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
65
2470
38
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 mm nominal dia Pipes
250
595500
2382
... More
150 mm nominal dia Pipes
100
496700
4967
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm dia (iner fitting)
250
97750
391
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32mm dia (outer fitting)
200
75400
377
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality {screwed end):. 32mm dia 32mm dia
12
6024
502
... More
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore
65
16705
257
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore
65
38805
597
... More
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
40
10280
257
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter
12
1692
141
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
10
79090
7909
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
15768
1971
... More
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
10000
80000
8
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (ofapproved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
35
40950
1170
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore
4
956
239
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460 mm bowl depth 200 mm
6
16920
2820
... More
Providing and fixing C.P. brass angle valve for Basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
12
5016
418
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
4
35156
8789
... More
Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern
5
65560
13112
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
35
2835
81
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. DSR-2023, Item No. 2.8.1
513
96957
189
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR-2023, Item No. 4.1.8
25
124000
4960
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. concrete of m25 grade with minimum cement content of 330 kg /cum DSR-2023, Item No. 5.33.1.1i) All works upto plinth level up to plinth level
82
567440
6920
... More
All works above plinth level upto floor V level concrete of m25 grade with minimum cement content of 330 kg /cum DSR-2023, Item No.5.33.2.1
11
78969
7179
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete DSR 2023, Item No. 5.9.1
140
39900
285
... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts DSR 2023, Item No. 5.9.6
278
194322
699
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick DSR 2023, Item No. 5.9.21
210
128730
613
... More
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more. DSR-2023, Item No. No.5.22.6
119
934388
7852
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR-2023, Item No. 10.25.2
4800
600000
125
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 12.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR-2023, Item No. No. 6.4.2
104
689520
6630
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR-2023, Item No.13.4.1
450
117000
260
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) DSR-2023, Item No. 13.5.1
450
134550
299
... More
Add for plaster drip course/ groove in plastered surface or moulding to r.c.c. projections. DSR-2023, Item No.5.30
291
16587
57
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work DSR-2023, Item No.13.61.1
408
46104
113
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR-2023, Item No. 13.46.1
900
104400
116
... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. DSR-2023, Item No. 2.25(a)
172
87720
510
... More
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge. DSR-2023, Item No. 2.38
603
135072
224
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. DSR-2023, Item No. 2.8.1
12
2268
189
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR-2023, Item No. 4.1.8
414
2053440
4960
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 DSR-2023, Item No. 16.78.1
659
1335793
2027
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine DSR-2023, Item No.16.43.1
532
4078312
7666
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete. DSR-2023, Item No.16.44
1596
63840
40
... More
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more. DSR-2023, Item No. No.5.22.6
418
3282136
7852
... More
Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) DSR-2023, Item 16.45
21640
64920
3
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, j ointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making j oints with or without grooves (thickness of j oints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). DSR -2021, Item No.16.69
18
132588
7366
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. DSR-2023, Item No. 16.91.2
250
198500
794
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR-2023, Item No. 13.46.1
135
15660
116
... More
Supplying and stacking of good earth at site including royalty and carriage upto 5 km complete (earth measured in stacks will be reduced by 20% for payment) DSR (H) 20, Item no. 2.2
148
72668
491
... More
Supplying and stacking sludge at site including royalty and carriage upto 5 km complete (sludge measured in stacks will be reduced by 8% for payment). DSR (H) 20, Item no. 2.3
70
19600
280
... More
Providing and fixing Neelgiri/Mexican grass turf with earthy 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light, watering with sprinkler and maintenance for 30 days or more till the grass establish properly as per direction of officer incharge. DSR (H) 20, Item no. 2.33
350
71400
204
... More
Complete maintenance of trees (Out side garden features), jobs like making of basin at regular interval i/c watering, weeding, pruning & application of fertilizer etc, (excluding the cost of material which shall be supplied by the department and other T & P material/articles shall be provided by the contractor) and as per direction of officer in charge. Trees for 250 no/(up to 4 & up to 3 year Slow & Fast growing group) DSR (H) 20, Item no. 2.42.1
10080
730800
72.5
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) DSR (H) 20, Item no. 2.57Trees Plant 2.57.1
10
69
6.96
... More
Shrubs Plant 2.57.2
270
939
3.48
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : HOLES 45CM DEEP, 45 CM DIA DSR (H) 20, Item no. 2.14.4
270
4814
17.83
... More
Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge.
30
7155
238.5
... More
Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 34 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
30
1431
47.7
... More
Providing and stacking of Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm as per direction of the officer-in-charge.
30
1144
38.16
... More
Providing and stacking of Hamelia patens of height 30-45 cm. with 3-4 branches in poly bags of size 20 cm as per direction of the officer-in-charge.
30
572
19.08
... More
Providing and stacking of Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge.
30
1001
33.39
... More
Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge.
30
429
14.31
... More
Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge.
30
1144
38.16
... More
Providing and stacking of Tecoma stans of height 45-60 cm. branched in earthen pots of size 20 cm as per direction of the officer-in-charge.
30
1287
42.93
... More
Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.
30
1001
33.39
... More
Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge.
10
488
48.84
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia, and 60 cm deep
10
417
41.73
... More
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
2
124
62
... More
Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
2
95
47.7
... More
Providing and stacking of Callistemon lanceolatus of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
2
124
62
... More
Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.v
2
114
57.24
... More
Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
2
124
62
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
182
34398
189
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
20
99200
4960
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
78
513708
6586
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
91
25935
285
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
24
17952
748
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
600
367800
613
... More
Providing and placing in position 100 mm thick factory made machine batched & machine mixed PrecastRCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge.
172
385968
2244
... More
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more.
94
738088
7852
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
188
35532
189
... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329: 100 mm dia Ductile Iron Class K-9 pipes
100
97900
979
... More
150 mm dia Ductile Iron Class K-9 pipes
150
200700
1338
... More
Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : 100 mm diameter pipe@ 5.0mc/c
21
5061
241
... More
150 mm diameter pipe@ 5.0mc/c
31
8742
282
... More
Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) Up to 300 mm dia
5
23125
4625
... More
Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 Up to 300 mm dia
13
130286
10022
... More
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
18
26100
1450
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing
of joints complete as per direction of Engineer in Charge. External work20mm nominal outer dia pipes
70
13930
199
... More
25mm nominal outer dia pipes
80
20640
258
... More
50mm nominal inner dia pipes
100
57800
578
... More
40mm nominal inner dia pipes
70
28630
409
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main :20mm nominal bore
5
1380
276
... More
25mm nominal bore
5
1770
354
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality {screwed end):25mm nomiinal bore
5
2265
453
... More
32mm nomiinal bore
5
2510
502
... More
50mm nomiinal bore
8
5976
747
... More
40mm nomiinal bore
8
4808
601
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : 50 mm dia
2
8370
4185
... More
80 mm dia
2
10184
5092
... More
Provideing and fixing C.I. Sluice Valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separtely): 100mm diameter Class II
4
14520
3630
... More
150mm diameter Class II
2
10648
5324
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
12
90468
7539
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
354
66906
189
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
14
28378
2027
... More
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With Sewer bricks conforming to IS : 4885
12
110088
9174
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With Sewer bricks conforming IS : 4885
6
32538
5423
... More
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With Sewer bricks conforming IS : 4885
8
142400
17800
... More
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m : With Sewer bricks conforming IS : 4885
4
28176
7044
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
90
23400
260
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
86
34658
403
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes.
250
487000
1948
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil
209
26961
129
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
103
9373
91
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
14
21644
1546
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4
19840
4960
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6
39516
6586
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
40
29920
748
... More
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more.
7
54964
7852
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
73
9125
125
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar I:4 (l cement : 4 coarse sand)
60
321960
5366
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
220
57200
260
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
30
15450
515
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia
15
8655
577
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
5
5495
1099
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
5
5600
1120
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
5
5600
1120
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
8
11792
1474
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia
3
537
179
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil
268
34572
129
... More
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil
134
12194
91
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
8
39680
4960
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level concrete of m25 grade with minimum cement content of 330 kg /cumi) up to plinth level
41
283720
6920
... More
All works above plinth level upto floor V level concrete of m25 grade with minimum cement content of 330 kg /cum
9
64611
7179
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
9
2565
285
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
246
150798
613
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
60
44880
748
... More
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more.
68
533936
7852
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
34
4250
125
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil
92
11868
129
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
6
29760
4960
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
31
204166
6586
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
8
2280
285
... More
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
140
85820
613
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick
48
35904
748
... More
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more.
39
306228
7852
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
58674
19558
... More
Supply and buring of Safe earthing electrode T- 19 (Hot Dip Galvanzid), Length up to 3000 mm, outer dia 50 mm inner Dia 25mm. , terminal Dia 12 mm, outer GI pipe of 16 swg. And inner GI pipe of 12 swg with Hot Dip Galvanzization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3 mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. Strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing SI. no. 725(B) SOR 2018
1
10040
10040
... More
Supply and Fixing of 16 Sqmm 4 core "AL" conductor PVC insulated and and serve sheathed round cable 1000 Volt grade at depth of 750 mm below ground level over and cushion of 75mm thick sand all round and protected…………….etc complete. SI. 501 (I) Sor 2014
150
51450
343
... More
Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 16 sq. mm
8
168
21
... More
S&F of 320 A. 415 V Heavy Duty Double Break HRC fusetype metal clad TPN complete with HRC fuse etc. on angle ironframe complete in all respect.
1
15010
15010
... More
Transportation of drilling equioment and other accessories to site of work all complete.
1
10576
10576.92
... More
Drilling tube well by R.C. /method/ Rotory rig 400-500 mm. dia hole all complete as directed by E/I
110
116345
1057.69
... More
Supply owering & Fixing of M.S. blind or slotted pipe along depth as per requirement of site including cuitting the pipe welding of pipe socket etc.including supply of all material abour T&P etc. all complete.200 mm. dia housing pipe (blind) plain. (5.3 mm thickness).
60
107307
1788.46
... More
200mm. Dia slotted pipe plain (5.3 mm thickness).
45
96490
2144.23
... More
Supply & pouring of pea gravel 1.6 mm size surrounding bore well after washing & sceaning as per direction by E/I.
40
88076
2201.92
... More
S/F of 200 mm dia approved quality bail plugh etc.
1
625
625
... More
S/F of 200 mm dia approved quality well cap etc.
1
384
384.61
... More
S/F of 200 mm. dia pipe socket of approved quality.
25
19230
769.23
... More
Development by air Comprassior of tube well including labour, T&P etc. all complete.
50
67596
1351.92
... More
Development by Generator deiven O.P. unit of tube well including labour T&P etc. all complete
100
43269
432.69
... More
Transportation of devlopment equipment and O.P. Unit D.G. set all complete.
1
3846
3846.15
... More
Collection & Sampling of stratar cutting …….etc all complete.
1
288
288.46
... More
Water arrangement charge for drilling the tube well all complete.
1
1923
1923.07
... More
Supply and Fixing of 80mmx80mmx80mm dia G.I. Tee including labour T&Petc. All complete.
3
865
288.46
... More
Supply and lawring of 12.5 HP 7 stage,61 mtr head (discharge 710 LPM), 3 phase 440 volt A.C.operated motar pump set ISI Marked complete with all taxes etc. as per direction of E/I. make varuna KSB& Crompton with all taxes etc. as per direction of E/I.
1
52000
52000
... More
S/F of M.S. clamp 80mm. Dia with 80x10mm. Plate iron to hold pump set into tube well with Nut bolt etc. all complete.
2
413
206.73
... More
S/Laying of 2 No. (3 core 6 mm 2) size flat submersible cable with connection complete in all respect. (Finolex make)
180
29422
163.46
... More
Supply and lawring of 80mm dia ( 3") UPVC column pipe ISI marked (each pipe having 3 mtr. Length) heavy duty red screen self pulling load capacity 6000 Kg, Self allowheel hydrostatis pressure 25 KGF/per Sqcm. Including inbilled standerd socket and rubber oaring including all taxes as per direction of E/I.
24
32446
1351.92
... More
S/F of control pannel board suitable for 12.5 - 15 HP 3 Phase submersible pump motor set including 1 No. 0-500V volt meter 1 No. 0-30 Amp. Ammeter AE make, 3 no. 63 AMP. Fuse unit 3 no. indicator lamp & one number oil field star delta motor, starer make Bentex. etc complete
1
8844
8844
... More
Supply fixing and testing of C.I. double flange bend suitable for 80 mm dia M.S. pipe. All Complete with nut bolt, rubber packing piece etc all.
4
769
192.3
... More
Supply fixing and testing of C.I. Sluice valve of 80mm.dia approved quality with nut rubber packing piece etc. all.
2
5961
2980.76
... More
S/F of reflex valve 80/100 mm dia size
1
2211
2211.53
... More
Water logging testing of bore well for Water quality in starta all complete.
1
17307
17307.69
... More
Supply of 2 tonne capicity 4.5mtr lift M type spour geared cjain pully block
1
20000
20000
... More
Supply and laying of 32 mm x 6 mm G.I. strip from earth
electrode directly in the ground as required complete in
all respect
10
1500
150
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
586
653390
1115
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Twin Control Point wiring in PVC conduit, with modular type switch :- Group C
701
457052
652
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Circuit / Sub main wiring in PVC conduit :-
1200
303600
253
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.
2500
442500
177
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. (DB to switch board)
1100
229900
209
... More
2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire
700
233100
333
... More
2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire
650
281450
433
... More
4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire
700
534800
764
... More
4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire
300
311100
1037
... More
Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required.
130
47060
362
... More
S/F power plug point modular type accessories :- Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required.
160
71200
445
... More
S/F modular type electronic fan regulator :- Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 2 Module
96
26880
280
... More
S/F modular type blanking plate :- Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 Or 2 Module (75mmX75mm)
5
1130
226
... More
3 Module (100mmX75mm)
13
3224
248
... More
4 Module (125mmX75mm)
11
2860
260
... More
6 Module (200mmX75mm)
35
10675
305
... More
8 Module (125mmX125mm)
145
50025
345
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double Door
1
9756
9756
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door
2
3912
1956
... More
12 way , Double door
10
17600
1760
... More
Supplying and fixing following way, horizontal type TP&N, sheet steel MCB distribution board, 415 V on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). 6 way (4 + 18), Double door 8 way (4 + 24), Double door 12 way (4 + 36), Double door
6
27216
4536
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole
246
47724
194
... More
Double Pole
56
27888
498
... More
Supplying and fixing following rating, Single/ double/ three pole, 230/ 415 volts, MCB "C" curve in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps DP MCB Double Pole TRIPLE POLE
6
6990
1165
... More
63 amps MCB
2
3628
1814
... More
40 amps 4P MCB FOUR POLE
14
32032
2288
... More
63 amps 4P MCB
2
4576
2288
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2 Pole 40A, 30mA
42
84336
2008
... More
2 Pole 63A, 30mA
42
86898
2069
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB
1
2832
2832
... More
S/F MODULAR TYPE SWITCH / SOCKET :- Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required Telephone Socket outlet
17
1904
112
... More
TV Antenna socket outlet , RJ 45 cat 6 jack point]
19
2128
112
... More
Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required : 20 mm.
600
58200
97
... More
25 mm
100
11000
110
... More
32 mm
100
13900
139
... More
Supply and drawing following pair, 0.5 sq.mm. FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel/ PVC conduit as required. 2 Pair
500
14000
28
... More
Supply and drawing co-axial TV cable RG-6 grade, 0.7 mm. Solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required.
500
17500
35
... More
Supply and fixing recessed mounting LED down lighter, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy100 lm/Watt.
LED driver PF 0.95, THD 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of pressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79- 08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job. 12 Watt, color temp 3000-6500k as required.
148
180264
1218
... More
18/20Watt, color temp 3000-6500k as required.
86
142158
1653
... More
Supplying, fixing and testing of approved make LED bulkhead ABS body, PC diffuser including fixing on wall as required, with necessary material complete. 10W IP 55
28
38976
1392
... More
Ultra bright LED Tubelight (single side connection) with very high efficacy =105 lm/W best suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light. Tube light LED 1 X 20/22Watt, Integral i/c batten aluminium body, PC diffuser.
768
433920
565
... More
40W Surface /Suspended and wall mounted LED batten, CRCA housing provided for efficient heat dissipation with polycarbonate diffuser & built-In electronic driver with THD10% & Lumen efficacy =115 lm/W
123
133701
1087
... More
Supply and fixing as per specification polycarbonate batten holder/angle holder of approved make with necessary materials complete for 12 Watt250Volt LED LAMP
44
28688
652
... More
Providing and erection of hot dipped galvanized octagonal poles in single section made from 3mm thick sheet having lockable weather proof flush door junction box, suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected in an approved manner on provided foundation. Supply, Installation, wiring, connection, testing and commissioning of 80W highbay light conforming to the technical specifications & drawings forming part of this document.
72
465120
6460
... More
Supply, Installation, wiring, connection, testing and commissioning of 15W Tree light/Spike Light conforming to the technical specifications & drawings forming part of this document.
21
87696
4176
... More
Supply insttalation , testing and commisioning of following size ceiling fan 3 balde confirming to IS : 374:2019 incuding wiring thedown roads of standed lenth ( upto 30 cm ) with 1.5 sqmm PR PVC, insulated copper wire suitable for 230V 50Hz single phase supply etc. compleyte as required. 1200mm (48 Degree) BLDC 5 star rating 32W ceiling fan
22
93698
4259
... More
Supply and fixing circular/ hexagonal M.S. sheet ceiling fan box with clamp of internal dia 140mm, 73 mm height, 3mm thick rim top lid of 1.5mm thick M.S sheet lidss shall be screwed into M.S. box by means of 3mm round headed screws, clamps shall be made of 12 mm dia M.S bar bent to be shape as per standard drawing with over all length as 80 cm
22
6600
300
... More
Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required.
22
8118
369
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
22
7458
339
... More
Installation of exhaust up to 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required
22
7524
342
... More
Extra for fixing the louvers/ shutters complete with Frame for a exhaust fan of all sizes
11
1727
157
... More
METERING INDOOR UNIT Supply of Indoor metering unit with assembling, wiring, connecting, testing and commissioning of cubicle type 11KV metering panel fabricated out of 14 gauge CRCA sheet steel, free standing floor readable dust and vermin proof with arrangement for sealing the covers and doors, reinforcement of suitable size angle iron, channel T section or flats wherever necessary. Cable gland plate shall be provided on bottom of the metering panel. Panel shall be treated with all anti corrosion process before powder coating. panel comprises of the following: (Approved as per State Electricity Board)*/5A 5VA 0.5 class indoor type cast resin CT {* Suitable for 1200 KW (MD)} -3No.3 Phase 11KV/110 Volt, PT, Class 0.5, 50 VA burden Cast resin dry type PT -1No. (Meter to be supplied by SEB) digital electronic trivector meter with MDI accuracy 0.5 -1No. TTB with wiring. CT & PT to be tested & approved by State electricity authority. Metering unit shall be approved for installation for local electricity authority. (FINAL CT RATIO SHALL BE FINALIZED IN CONSULTATION WITH SEB).
1
98323
98323
... More
11KV 1 No. RMU having 1 no VCB/ SF6 circuit breaker with integral earth switch & 1 no outgoing VCB/ SF6 circuit breaker, VCB/ SF6 shall have self powered overcurrent ,short circuit and earth fault relay, master trip relay, alarm & triping indication on Annunciator window for buckholz, oil temp., winding temp. RMU as described above
1
61105
61105
... More
Supplying, installing, testing and commissioning of 11/0.433 KV Substation equipment comprising of HT panel, bus trunking from transformer to LT panel, LT panels, Automatic power factor correction panel, active harmonic filters, TVSS (Transient Voltage Supression System), SPD (Surge Protection System), essential panel, earthing, required inter-connections, substation safety equipments including cabling from substation to the buildings fed by the substation.
320
2096960
6553
... More
SITC of cubical type LT panel suitable for 415V 3 phase 4 wire 50 Hz AC supply system fabricated in compartmentalized design form CRCA sheet steel of 2mm thick for frame work and covers, 3mm for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 2000Amps capacity extensible type TPN aluminium alloy bus bars of high condunctivity DMC/SMC bus bars of high conductivity DMC/SMC bus bar supports with short circuit withstand capacity of 31MVA for 1 sec, bottom base chanel of MS section not less than 100mmx50mmx5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25mmx5mm at the rear with 2nos. earth studs solid connections from main bus bar to switchgears with required size of Al. bus bars and control wiring with FRLS copper conductor S/C cable cable alleys cable gland plates in two half i/c providing following 1 No. TPN Incomer feeder having 630A TP MCCB (36kA) with isolable neutral & ON/OFF/TRIP indications, 3 nos. phase indicating lamps to show the incoming power with control MCB, 1 No. phase to neutral & neutral to earth 7 mode spark gap surge suppressor for with appropriate fuses,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs with APFCR panel. 1 No. TPN Incomer feeder having 630A TP MCCB (36kA) with isolable neutral & ON/OFF/TRIP indications, 3 nos. phase indicating lamps to show the incoming power with control MCB, 1 No. phase to neutral & neutral to earth 7 mode spark gap surge suppressor for with appropriate fuses,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs with APFCR panel. 500A TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.Outgoings : All outgoing shall have Ics = 36 KA (As per SLD) 2 Nos. TPN feeder having 250A 4P MCCB.1 Nos. TPN feeder having 200A 4P MCCB.1 Nos. TPN feeder having 100A 4P MCCB. 3 Nos. TPN feeder having 40A 4P MCB. 4 Nos. TPN feeder having 32A 4P MCB.1 Nos. TPN feeder having 200A 4P MCCB. 1 Nos. TPN feeder having 100A 4P MCCB. 3 Nos. TPN feeder having 40A 4P MCB. 4 Nos. TPN feeder having 32A 4P MCB.4 Nos. TPN feeder having 32A 4P MCB.1 Nos. TPN feeder having 250A 4P MCCB, 1 Nos. TPN feeder having 125A 4P MCCB and 1 Nos. TPN feeder having 40A 4P MCB. (SPARES)
1
527725
527725
... More
CAPACITOR BANK Supplying and fixing of capacitor duty contactor of approved make in existing power factor/LT panel including connections etc.as required as per specification. For 5 kVAR 440V,3Ph,50Hz, Aux contact-1NO (2No.)For 10 kVAR 440V,3Ph,50Hz, Aux contact-1NO (2No.) For 12.5 kVAR 440V,3Ph,50Hz, Aux contact-1NO (2No.) For 15 kVAR 440V,3Ph,50Hz, Aux contact-1NO (2No.) For 20 kVAR 440V,3Ph,50Hz, Aux contact-1NO (2No.)
1
166650
166650
... More
SITC of cubical type LT panel suitable for 415V 3 phase 4 wire 50 Hz AC supply system fabricated in compartmentalized design form CRCA sheet steel of 2mm thick for frame work and covers, 3mm for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having 2000Amps capacity extensible type TPN aluminium alloy bus bars of high condunctivity DMC/SMC bus bars of high conductivity DMC/SMC bus bar supports with short circuit withstand capacity of 31MVA for 1 sec, bottom base chanel of MS section not less than 100mmx50mmx5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25mmx5mm at the rear with 2nos. earth studs solid connections from main bus bar to switchgears with required size of Al. bus bars and control wiring with FRLS copper conductor S/C cable cable alleys cable gland plates in two half i/c providing following 1 No. TPN Incomer feeder having 200A 4P MCCB (36kA) & ON/OFF indications, 3 nos. phase indicating lamps to show the incoming power with control MCB, 1 No. phase to neutral & neutral to earth 4 mode spark gap surge suppressor for with appropriate fuses,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. 300A TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip. Outgoings : All outgoing shall have Ics = 36 KA (As per SLD)2 Nos. TPN feeder having 63A 4P MCCB9 Nos. TPN feeder having 40A 4P MCB. 1 Nos. TPN feeder having 63A 4P MCCB and 2 Nos. TPN feeder having 40A 4P MCB. (SPARES).
1
190756
190756
... More
TOILET AND HALL PANEL INCOMER 1 No. TPN Incomer feeder having 63A TP MCCB (36kA) with isolable neutral & 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. Bus Bar 150A TPN Copper bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.Outgoings : All outgoing shall have Ics = 36 KA (As per SLD)2 Nos. TPN feeder having 40A SP MCB. 2 Nos. TPN feeder having 32A SP MCB. 2 Nos. TPN feeder having 40A SP MCB and 2 Nos. TPN feeder having 32A SP MCB. (SPARES)
1
72215
72215
... More
UPS PANEL INCOMER1 No. TPN Incomer feeder having 63A TP MCCB (36kA) with isolable neutral & 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. Bus Bar 150A TPN Copper bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip. Outgoings : All outgoing shall have Ics = 36 KA (As per SLD)8 Nos. TPN feeder having 40A SP MCB.4 Nos. TPN feeder having 40A SP MCB. (SPARES)
1
102934
102934
... More
LIFT PANELINCOMER1 No. TPN Incomer feeder having 63A TP MCCB (36kA) with isolable neutral & 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs.Bus Bar 100A TPN Aluminium bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.Outgoings : All outgoing shall have Ics = 36 KA (As per SLD)2 Nos. TPN feeder having 40A 4P MCCB with ON indication.2 Nos. TPN feeder having 40A DP MCB with ON indication.1 Nos. TPN feeder having 40A 4P MCCB and 1 Nos. TPN feeder having 40A DP MCB. (SPARES)
1
83325
83325
... More
OFFICE PANEL INCOMER1 No. TPN Incomer feeder having 63A TP MCCB (36kA) with isolable neutral & 3 nos. phase indicating lamps to show the incoming power with control MCB,1 no. multifunction meter (showing all parameters) with selector switch with matching cast resin CTs. Bus Bar 150A TPN Copper bus bar with heat shrinkable coloured insulated PVC sleeves having a current density of not less than 1.0 Amp sq.mm. and the neutral bus of 50% capacity interconnections between bus bars and breakers shall be through solid strip.Outgoings : All outgoing shall have Ics = 36 KA (As per SLD)2 Nos. TPN feeder having 40A SP MCB. 1 Nos. TPN feeder having 32A SP MCB. 1 Nos. TPN feeder having 40A SP MCB. (SPARES)
1
49995
49995
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements