Lucknow University Tender

Supply and fixing of 300 sq. mm mm 3.5 core brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge as per P.S. No. 503 (s)

Supply and fixing of 120 sq. mm 3.5 core brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge as per P.S. No. 503 (t)

Supply and laying of 400 sq. mm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade for cable Joint & Termination Heat shrink Type as per D.S.R. 9.4.28.

Supply and laying of 120 sq. mm 3.5 core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade for cable Joint & Termination Heat shrink Type as per D.S.R. 9.4.22

Supply and fixing of 400 sq. mm plain or pin type Alu tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-In charge as per P.S. No. 504 (o).

Supply and fixing of 300 sq. mm plain or pin type Alu tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge as per P.S. No. 504 (n).

Supply and fixing of 240 sq. mm plain or pin type Alu tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-In charge as per P.S. No. 504 (m).

Supply and fixing of 150 sq. mm plain or pin type Alu tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-In charge as per P.S. No. 504 (K).

Supply and fixing of 120 sq. mm plain or pin type Alu tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-In charge as per P.S. No. 504 (J).

Supply and fixing of 70 sq. mm plain or pin type Alu tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-In charge as per P.S. No. 504 (h).

S/Burring of Earthing Electrode T-39 (Hot-Dip-Galvanized) length up to 3000 mm complete in all respect, as per P.S. 725 (D).

S/Laying of 32 mm × 6 mm G.l. strip from earth electrode directly in the ground, complete in all respect, as per P.S. No - 716

Supply & Erracetion of factory fabricated & wired metal clad dust and verminproof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digita lammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be of cat A & B Only (1) Incoming - 1250 Amp ACB incloser outdoor type

Supply & Erracetion of factory fabricated & wired metal clad dust and verminproof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN ACB(65 KA,4Pole Elect draw out , Micor processer Release IPR2 Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digita lammeter Voltmeter, Selector switches for ammeter and Voltmeter, istrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm. Cubicle type switch board shall be. Incoming 1000 Amp /415 Volt ACB- 01 NO. Outgoing (a) HRC 400 Amp - 01 No. (b) HRC 315 Amp - 02 Nos. (c) HRC 200 Amp - 01 No.

Panel Foundation Work as per M.R.