Lucknow Development Authority Tender

S/F of 11KV pin insulator with pin and nut etc. complete in all respect.(PSR)

S/F of danger board with clamp and bolt fabricated from 10gauge MS sheet etc compelete as per I.E rules F/F of number plate with clamp & bolt including numbering with paint etc complete as per E/I. rule. (PSR)

(i) Earth work in excavation in foundation in ordinary soil including lift up to 1.5m. Lead to 50m. And dressing of sides and ramming of bottom and disposal of surplus excavated earth asdirected by E/I. within a lead of 50m.PWD SOR 252/18

S\E of 1.15 meter long cross arm of 100mm x 50mm channel (7.9kg/Mtr.) on poles including clamp, etc. complete with red enamel painting as per approval of E\I. (PSR)

Supply & erection of overhead line with ACSR conductor on poles/service bracket including binding etc. complete in all respect. SI No 627/2018

SITC of 100 KVA, 11/.44 KV Distribution transformer 3 phase 50 Hz ONAN type Star delta etc as per IS specification and UPPCL Norms/Rulse Complete in all respect.(PSR)

Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. SOR SI No 506 D/2018

70 sq. mm 3 core

SITC of 70 Sqmm Cable Jointing Kit (PSR)

S/F. of earth rod 20mm dia x 2.5mtr. long including G.I. wire 7/16 SWG. To connected earth rod and earth clamp on pole, 3mtr. long steel conduit to carry earth wire along pole complete as per approval of E\I (PSR)..

Supply & fixing steel tubular pole 9 Metre long designated 410 SP-32 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. SI No 613/2018

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SI No 501/2018 M

(v) 70 sqmm x3½ core

S/F of plain/pin type copper tin plated cable socket (Lugs) to the cable lead insulating with tape and making connection etc. complete in all respect. SI No 504 H/2018

(v) 70 sqmm

S/F of 100 mm dia G.I. pipe "B" class with 2 no. M.S. clamp fixing on pole for calbe etc complete in all respect. (PSR)

Supply and burring of safe Earthing Electrode T-19 Zn-Zinc Coated, length up to 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6mm, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs. activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal ot switch board, cost of 25 x 3 G.I. Strip will be extra) SI No 726 B/2018

S/Painting of pole with 2 coat of "Al" paint over one coat of red oxide including cleaning of dust vermin & making good complete in all respect. As per direction of E/I SI No 634/2018

S/F of A.B.C. conductor for street light on PCC pole complete with tensioning binding etc. for proper completion of work. 2 x 50 sqmm all insulated Aluminimum cable (PSR)

S/F of pearcing connector complete in all respect. As per UPPCL specification. (PSR)

S/F of dead end clamp complete in all respect. As per UPPCL specification. (PSR)

S/F of Suspension clamp complete in all respect. As per UPPCL specification. (PSR)

S/F of eye hook for Suspension clamp complete in all respect. As per UPPCL specification. (PSR)

S/F of M.S. clamp for eye hook complete in all respect. As per UPPCL specification. (PSR)

S/F of PVC Al Lead 1 X 5 mm for jumpering to junction box complete in all respects as per direction of E/I (PSR)

Supply and fixing of DWC HDPE Pipe ISI marked Along with all Accessories Like Socket band, couplers etc. confirming to IS : 14903 Part-II Complete with fixing and Cutting jointing etc. Direct in Ground (75 smt mtr below ground label) including Excavation and Refilling the Trench but Excluding sand Cushioning and protective covering the trench But Excluding sand cushioning and protective covering etc. Complete as required Size 63 mm dia. (OD 63 mm and ID 51 mm nominal) DSR /18 E/M Item No-14. 16. 1

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect. Make Philips/Bajaj/Crompton in 5 Year Warrenty CAT- AAA (SI No 1423)

S/F of 40A TPN capacity of automatic street light cobicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors HRC fuses, isolating Switch metering instument box with CTS etc. In case of TPN, complete in all respect as per approval by E/Ic.SI no.807-F/2018

Deduct in item no. 501 (I) 501 (t) and 506 (a) to (f) when cables is passed through G.I./M.S. or Hume pipe in road crossing or along the wall. The cost of the G.I. pipe, hume pipe is to be extra when and where required. SI No 507/2018 (-)

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming 100 Amp. TNP-3 Nos. Cat. B. Cubicle Type SI No 803 A (ii)/20185

Drilling for Cable Road Crossing in all Complete (PSR)

S/E of TPN Distribution Pillar dust and vermin proof consisting copper bus bar of 50mm x 12mm or equivalent cross- sectional area, 2 nos. 500 Amp. Henley type fuse units, as incoming, 2 nos. 500 Amp. And 2 nos. 300 Amp. Honley type fuse units as outgoing. Metallic Pillar shall be made of 14 SWG. M.S. sheet on frame of angle iron of 35mm x 35mm x 5mm. with both side locking arrangement including painting with 2 coats of approved paint over rust resisting primer as per direction of E\I. (PSR

Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion of work.