Lucknow Development Authority Tender

Caratge of Earth up to 5 km.(183.50-35.-18.0 =130.50-20% =104.40)

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam (WMM) specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Sanction Rate

Providing and applying Primer coat with Emulsion on prepared surface of granular base. Including cleanning of road surface and spraying primer @ 0.50 kg./sqm. Using mechanical means. (as per MORTH Specification - 502)

Providing and laying Bituminous macadam(B.M.) with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading , premixed with bituminous binder @ 3.30% ) transported to site,laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clause No. 501.6 and 501.7 to achieve the desired compaction. Sanctioned Rate

Providing and applying Tack coat with Bitumen (VG-10) pressure distributor at the rate of 0.25 kg. per square metres on the prepared bitumenous /granuler surface cleaned with mechanical broom.both wheeled Roller 8-10 tonne capacity. finished to required level and grades: Sanctioned Rate

Semi Dense Bituminous Concrete (SDBC) (Using Water Plastic) Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 5% of mix to work at site as per MORTH & H specification clause No- 508 complete in all respects (Reducing bituminous quantity by 8% and replacing it by plastic wastage as per IRC SP 98-2013 Sanctioned Rate

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 2023/.6.1.1

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 2023/13.4.1

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement : All works upto plinth level : Concrete of M25 grade with minimum cement content of 330 kg /cum DSR 2023/5.33.1.1

Mild Steel or Iron in plain work such as reinforced concrete or reinforced concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks. Approved Rate

Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.. DSR 2023/4.3.2