Lucknow Development Authority Tender

Providing and laying in 1:2:4 (1 Part Cement : 2 Part Coarse Sand : 4 Part 20 mm gauge stone grit) posotion cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. DSR 2023, Code No. 4.1.3

Class-150 (Non Modular) brick work in 1:4 (1 Part Cement : 4 Part Coarse Sand) in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. DSR 2023, Code No. 6.1.1

12 mm thick cement plaster in single coat on side of single brick wall for interior & outer plaster upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm in girth and finishes even and smooth.(1cement:4 coarse sand). DSR 2023, Code No. 13.4.1

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause-401 S/R

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm a thick compacted bed of sand, compacting and proper embedding/ layingof inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattem, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. DSR 2023, Code No. 16.91.2

Trimixing of C.C. Surface with hardner 3.50 kg/ Sqm including proper completion of Work. S/R

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footing, bases for columns DSR 2023, Code No. 4.3.1

PARK work

Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E'/I. Sanction Rate

PROVIDING AND FIXING OF SHOULDER PRESS FUNPLAY FNF 005 HAVING DIMENSION: • PRODUCT AREA :3.6 FT X 2.3 FT • SAFE PLAY AREA :7.6 FT X 6.4 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS UPPER BACK, SHOULDER, BICEPS & CORE TECHNICAL SPECIFICATIONS: CENTRE PIPE : 100 NB GI C-CLASS PIPE- JINDAL MAKE SEAT FRAME : 32 NB GI B-CLASS PIPE- JINDAL MAKE MAIN FRAME : 40 NB GI B-CLASS PIPE- JINDAL MAKE HANDLE FRAME: 32NB & 25NB GI B-CLASS PIPE WITH TWO HANDLES SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN :SEAMLESS PIPE & ROUND BAR BEARINGS : REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

CHEST PRESS DIMENSIONS: PRODUCT AREA :3.6 FT X 2.8 FT SAFE PLAY AREA :7.6 FT X 6.8 FT FUNCTIONS: STRENGTHENS GLUTES, CHEST, SHOULDER, UPPER & MID ABS, FORE ARM & TRICEPS TECHNICAL SPECIFICATIONS: CENTER FRAME : 100 NB GI C-CLASS PIPE-JINDAL MAKE MAIN FRAME : 40 NB & 32 NB GI B-CLASS PIPE -JINDAL MAKE HANDLE FRAME : 32 NB & 25 NB GI B-CLASS PIPE -JINDAL MAKE CONNECTING PIPE : 32 NB & 25 NB & 40 NB GI B-CLASS PIPE - JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN :SEAMLESS PIPE & ROUND BAR BEARINGS : REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE

PROVIDING AND FIXING OF TWISTER THREE WAY FUNPLAY FNF 009 HAVING DIMENSION: • PRODUCT AREA : DAIMETER 5.5 FT • SAFE PLAY AREA : DIAMETER 11 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS ABDOMINAL MUSCLE TECHNICAL SPECIFICATIONS: MAIN FRAME : 100 NB GI C-CLASS PIPE -JINDAL MAKE HANDLE FRAME: 20 NB GI B-CLASS PIPE JINDAL MAKE TWISTER DISC: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

PROVIDING AND FIXING OF LEG PRESS DOUBLE FUNPLAY FNF 006D HAVING DIMENSION: • PRODUCT AREA : 6.6 FT X 1.8 FT • SAFE PLAY AREA : 10.6 FT X 5.8 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS LEG MUSCLES TECHNICAL SPECIFICATIONS: CENTRE PIPE: 100 NB GI C-CLASS PIPE -JINDAL MAKE SEAT FRAME: 32 NB GI B-CLASS PIPE JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PIPE CAP:GALVANISED CAPS BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN:SEAMLESS PIPE & ROUND BAR BEARINGS : REPUTED MAKE (FAG/SKF) STOPPER: PU ROD. 50MM DIA. NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

PROVIDING AND FIXING OF 2 SEATER SPRING RIDER DINOSAUR-FPKD26 HAVING DIMENSIONS PRODUCT AREA: 5’ X1.3’ SAFE PLAY AREA: 8’’ X 4.3' SPRING ASSEMBLY IS MADE UP OF SQUARE PLATES & COMPRESSION SPRING. TWO NO’S COMPRESSION SPRING IS MADE UP OF 22 DIA WIRE, SPRING DIA IS 150 MM AND HEIGHT IS 1 FT. STAND IS MADE UP OF 40 NB G.I. PIPE. PLATE IS WELDED ON IT TO FIX PLASTIC DINOSAUR ON IT FIRMLY CHARACTER – PLASTIC DINOSAUR IS MADE UP OF LLDPE PLASTIC WITH ROTATIONAL MOLDING PROCESS. LENGTH OF DINOSAUR IS 1700 MM LONG. IT HAS INBUILT HANDLE AND FOOT REST TWO CHILDREN CAN SET ON RIDER AT A TIME COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.80

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm. DSR 2023, Code No.13.48.1

Painting or Varnishing on Iron works in small areas or Old wood work one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. Paint to be used should confirm to the ISI no. 103-1950.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil (DAR 2018 Hort - 2.28.1) based

Providing and laying in 1:2:4 (1 Part Cement : 2 Part Coarse Sand : 4 Part 20 mm gauge stone grit) posotion cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. DSR 2023, Code No. 4.1.3