Lucknow Development Authority Tender

S/F of decorative 36 watt LED Post Top light fitting shall be made of Cast &Spun Aluminum and shall have Ingress protection of IP66 for optical compartment and Impact Resistance of IK 06 or more . The LED Post top light shall be in 36w LED. A Transparent polycarbonate Diffuser shall be fitted in the LED post top light . Integrated suitable BIS approved LED Driver shall be fitted inside the Led Post top light having efficiency 85% ,power factor shall be 0.9,THD =10% , with driver standard voltage withstand range of 100-300 V AC and inbuilt surge protection of Min. 4 kv. The Luminarie shall have external surge protection device of 10kV. LED shall be Osram/Seoul/Cree or equivalent reputed make and shall have luminous efficacy of more than 130 Lm/Watt . The CCT of LED shall be 3000/4000/6000 k as required by engineer in charge. The shape and sizes of the LED Post top light shall be as per attached drawing. System life of 50,000 burning hours with 70% of initial lumens maintained. The LED Post top light shall be machined and polished properly to give it a smooth surface and shall be coated in UV ray resistant Polyurethane/ Polyester coating in approved colour shade. The Coating on the LED post top light shall be baked in oven at required temperature and parameters all complite as per direction of E/Ic. MAKE:- HOMDEC, PHILIPS, NERI, LUSTRE (Analysis Rate

Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Cat-AA (PWD, SOR-1401/2018)

Supply and wiring of submains with 2 nos. 2.5 sq mm & with 1 no earth wire of 1.5 sq mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion of the work as directed by Engineer in charge.required for proper completion of the work as directed at site by Engineer in charge.(PWD SOR-291/2018)