Lucknow Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Lucknow Development Authority - LDA Tender
Civil And Construction
Eprocure
Opening Date20 Mar 2025
Closing Soon1 Apr 2025
Tender Amount₹ 9,18,52,669
Technical
Technical
Financial
Class Of Bidder
... View More
Category A.
Bid Capacity
... View More
The formula for bid capacity is found in Annexure-8.
Technical Capacity
... View More
The bidder should have satisfactorily completed similar works in the last 7 years. The requirements for similar works completed are as follows:
- Three similar completed works, each costing not less than Rs………Crores (40% of estimated cost)
- OR Two similar completed works, each costing not less than Rs…..........Crores (60% of estimated cost)
- OR One similar completed work, each costing not less than Rs…............ Crores (80% of estimated cost) The bidder should also have an average annual turnover worth a minimum of 40% of the estimated cost during the last five consecutive years. Additionally, the bidder should have completed similar nature of works during the last seven years previous to the last date of submission of bid. The bidder is required to have prior work experience in Civil Engineering construction, with a total value of work performed in the last five years amounting to a certain value in Rs. Crore, indexed to the current price level at a 10% increase. The bidder should provide information on the project name, name of the employer, description of work, contract number, value of contract (in Rs. Crore), date of issue of work order, stipulated period of completion, and actual date of completion. The value of the work performed as a prime contractor or as a nominated subcontractor will be considered, provided the subcontract involved the execution of all main items of work described in the bid document, and all other qualification criteria are satisfied. The bidding capacity of the contractor should be equal to or more than the estimated cost of the work put to tender, calculated using the formula: Bidding Capacity = {[AxNxM]-B}, where A = Maximum value of civil engineering works executed in any one year during the last five years, N = Number of years prescribed for completion of the works, M = 2.0, and B = Value of existing commitments and on-going works to be completed during the next 1.5 years. The value of executed works shall be brought to current costing level by enhancing the actual value of work done at a simple rate of 10% per annum. The bidder should also submit an undertaking that the bidder will be able to invest a minimum cash up to 25% of contract value of work, during implementation of work. The bidder should also demonstrate that he has access to, or has available, liquid assets (aggregate of working capital, cash in hand and uncommitted bank guarantees) and/or credit facilities of not less than 10% of the value of the contract/contracts. The list of eligible similar nature of works completed should be submitted as per Annexure-7 and the bid capacity shall be calculated as per Annexure-8. The percentages of similar works completed are 40%, 60%, and 80% of the estimated cost. The amount for similar works completed is not less than Rs………Crores, Rs…..........Crores, and Rs…............ Crores respectively. The average annual turnover should be a minimum of 40% of the estimated cost during the last five consecutive years. The bidder should have access to liquid assets and/or credit facilities of not less than 10% of the value of the contract/contracts and should be able to invest a minimum cash up to 25% of contract value of work.
Costs
EMD
₹ 18,37,100Document Cost
₹ 4,366Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_LDAUP_1019503_1Tender No
142/E-Tender/CE/2025_2Tender Authority
Lucknow Development Authority ViewPurchaser Address
-Website
http://http://www.ldalucknow.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Basantkunj Yojna ke Sector-D isthit Green Belt ki bhumi per Ayurveda park ka nirman wa vikash ka karya.
Basantkunj Yojna ke Sector-D isthit Green Belt ki bhumi per Ayurveda park ka nirman wa vikash ka karya
BOQ Items
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)/DSR 4.1.2
333
6588
2194097.04
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge)./DSR 16.69
243.02
7992
1942320.34
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern./DSR 16.91.2
1975
707
1396325
... More
Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge./DSR 16.68
1746
767
1340631.18
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)/DSR 6.4.2
439.81
7193
3163672.08
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) /DSR 13.1.1
469.08
274
128598.28
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete./DSR 13.80
596.58
123
73540.42
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)/DSR 13.47.1
596.58
135
80633.75
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :/DSR 11.26.1
1421.8
1539
2188192.85
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete./DSR 11.27
61.95
1860
115233.19
... More
Applying stamping finish to the top surface of freshly laid plain/reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the Engineer-in-Charge. The process shall include the following:The concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. The approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting. • After stamping, the curing shall be done as per manufactures specifications. After initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per the requirement. The surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface./-/The construction joints shall be provided by groove cutting of size 4 mm x 20 mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (PU) Polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.)/DSR 26.83
2385
602
1437057.9
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg /cum/DSR 5.33.1.1
174.03
7508
1306671.19
... More
All works above plinth level upto floor V level. Concrete of M25 grade with minimum cement content of 330 kg /cum/DSR 5.33.2.1
243.78
7789
1898865.8
... More
Centering and shuttering including strutting, propping etc. and removal of form for :/DSR 5.9
Foundations, footings, bases of columns, etc. for mass concrete/5.9.1
284.52
309
88138.61
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers/5.9.5
2675.7
581
1556508.2
... More
Columns, Pillars, Piers, Abutments, Posts and Struts/5.9.6
1043.04
759
792063.72
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. /LDA Approved
44697.5
71
3195871.25
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : White sand stone - Exposed face machine cut and table rubbed with rough backing. 40 mm thick/DSR 8.14.4.4
30
6580
197424.6
... More
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customized design as per direction of Engineer in charge. The glass mosaic tiles shall be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operations, material and required pattern approved by Engineer-in-charge./DSR 11.53
380.56
3073
1169776.74
... More
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required./DSR 8.15
30
564
16930.2
... More
Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases./DSR 8.16
120
34
4161.6
... More
Providing and laying 15mm thick(Average) Synthetic Rubberized flooring for Jogging track and finishing the surface for laying rubberized flooring as per details given below a)Apply PU (Polyutherane) Binder on surface for bonding to rubber granules b)Providing and Laying First Layer of 9 mm thick black SBR(Styrene-Butadiene Rubber) Granules 1-3.5mm thick @9kg/sqmt mixed with 18-20% single component PU Binders c) Providing and laying Secured and topmost Layer of 6mm thick colored(As directed by Engineer – in charge) EPDM(Ethylene Propylene dine Monomer)Rubber granules colored 1-3.5mm thick/MR
1158
3950
4574100
... More
P&F 25 mm thick EPDM flooring on areas as per engineer/architect in charge/MR
575
4460
2564500
... More
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications./DSR 16.62
156
590
92153.88
... More
Floor painting including material, labour, scaffolding, C.P. etc complete /MR
494.15
143
70856.17
... More
Providing and fixing the sculpture of MS MAKE of human Design Specified in the presentation as per below details, using the scrap/waste material
available at the sites . Minimum Height – 12 feet. Minimum Width – 12 feet. Minimum Length –
12 feet. ( Ashwinikumar , Dhanwantari, Kashapa , Bhardwaja)/MR
8
500000
4000000
... More
PSR : 490/CE/2024 , Providing & fixing sand stone Single piece ornamental bench of approved design pattern (1200x450x450MM) and specifications including , all materials, labour and T & P etc. required for proper completion of work as directed by engineer - in -charge/
15
16120
241800
... More
PSR: 490/CE/2024, Providing & fixing of Dustbin made in mild steel frame with painting & polish and frame wooden member fixed in m.s. frame including painting polishing as per drawing & design all complete in direction of engineer in charge./
15
16500
247500
... More
BOQ - OPEN GYM/
-
-
-
... More
Supplying and Fixing of Fun Walker Single excercise equipment (Model No. PGOFT 06, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
2
32959
65918
... More
Supplying and Fixing of Abb Trainer - Roto outdoor excercise equipment (Model No. PGOFT 21, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
2
27466
54932
... More
Supplying and Fixing of Fun Rider outdoor excercise equipment (Model No. PGOFT 07 Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
2
28015
56030
... More
Supplying and Fixing of Shoulder Press Double double outdoor excercise equipment (Model No.PGOFT 24, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
2
66906
133812
... More
Supplying and Fixing of Chest Press Double outdoor excercise equipment (Model No. PGOFT 02, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
2
78552
157104
... More
Supplying and Fixing of Shoulder Twirl - New outdoor excercise equipment (Model No. PGOFT 09, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
2
20764
41528
... More
Supplying and Fixing of Leg Press Double outdoor excercise equipment (Model No. PGOFT 04, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
2
42297
84594
... More
Supplying and Fixing of Ski Trainer outdoor excercise equipment (Model No. PGOFT 10, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
4
46692
186768
... More
Supplying and Fixing of Leg Lift Post outdoor excercise equipment (Model No. PGOFT 32, Make Arihant/ Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge./PSR (Contract No - 495/CE/23)
4
30762
123048
... More
BOQ - KID'S PLAY AREA/
-
-
-
... More
Supplying and Fixing of Four Seater Swing with sparrow outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSW 10, Make Fun Play/ Kompain/ Arihant)/PSR (Contract No - 495/CE/23)
2
55810
111620
... More
Supplying and Fixing of Standered Multi seater See Saw outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSS12, Make Fun Play/ Kompain/ Arihant)/PSR (Contract No - 495/CE/23)
2
17578
35156
... More
Supplying and Fixing of Turbo Tower outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPCL35 , Make Fun Play/ Kompain/ Arihant)/PSR (Contract No - 495/CE/23)
1
43945
43945
... More
Supplying and Fixing of Monkey Climber outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPCL43, Make Fun Play/ Kompain/ Arihant)/PSR (Contract No - 495/CE/23)
2
49438
98876
... More
Supplying and Fixing of Four Seater Merry Go Round outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPMR11, Make Fun Play/ Kompain/ Arihant)/PSR (Contract No - 495/CE/23)
1
50756
50756
... More
Supplying and Fixing of 7' Ht. FRP Wave Slide outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSD51, Make Fun Play/ Kompain/ Arihant)/PSR (Contract No - 495/CE/23)
2
71960
143920
... More
Main Gate/ Entry Complex
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kinds of soil DSR 2023/2.6.1
60
140
8413.2
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). DSR 2023/4.1.8
4
5381
21524.64
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. :Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement :All works upto plinth level : Concrete of M25 grade with minimum cement content of 330 kg /cum DSR 2023/5.33.1.1
15
7508
112624.65
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. :Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement :All works above plinth level upto floor V level : Concrete of M25 grade with minimum cement content of 330 kg /cum DSR 2023/5.33.2.1
55.66
7789
433550.21
... More
Centering and shuttering including strutting and propping and removal of items for: Foundations, footings, base of columns, etc DSR 2023/5.9.1
8.33
309
2580.47
... More
Centering and shuttering including strutting and propping and removal of items for: Columns, Pillars, Piers, Abutments, Posts and Struts DSR 2023/5.9.6
115.33
759
87579.3
... More
Centering and shuttering including strutting and propping and removal of items for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick DSR 2023/ 5.9.21
182
665
121048.2
... More
Centering and shuttering including strutting and propping and removal of items for: Suspended floors, roofs, landings, balconies and access platform DSR 5.9.3
149.33
732
109381.24
... More
Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the work and including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. L.D.A APPRO.
55.92
7150
399828
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60 mm thick cement concrete paver block of M-35 grade with
approved colour, design & pattern.
300
826
247803
... More
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour andsize upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). : Red sand stone - 30mm thick gang saw cut stone DSR2023/ 8.20.1
500
2292
1146480
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm
110
1227
134986.5
... More
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. DSR 2023/16.64
110
157
17322.8
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 2023/13.8
150
123
18490.5
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer DSR 13.41.1
150
146
21997.5
... More
CIVIL WORK Toilet blocks
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil DSR 2.6.1
61
140
8553.42
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8
11
5381
59192.76
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns DSR 2023/5.9.1
12
309
3717.36
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
16
7508
120132.96
... More
All works above plinth level upto floor V level
-
-
-
... More
Concrete of M25 grade with minimum cement content of 330 kg /cum
16
7789
124628.16
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers DSR 5.9.5
102
581
59335.44
... More
Centering and shuttering including strutting, propping etc. and removal of form fo Columns DSR 5.9.6
85
759
64547.3
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.4.2
37.33
7193
268524.77
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.12.2
33.42
714
23893.63
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) DSR 4.10
16.19
324
5254.46
... More
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) DSR 13.4.2
495.85
271
134608.4
... More
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. DSR 16.64
4.73
157
744.88
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to
prepare the surface even and smooth complete. DSR 13.80
448.58
123
55296.46
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR 13.47.1
173.62
135
23466.48
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer DSR 13.41.1
274.95
146
40321.42
... More
Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the work and including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level.
33.88
7150
242242
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Size of Tile 600 x 1200 mm DSR 11.41A.3
56.76
1245
70715.58
... More
Providing and fixing 1st quality ceramic glazed Wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31
164.65
1001
164916.73
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick DSR 26.87.2
21.42
3961
84863.68
... More
Brass door latch 300x16x5 mmweighing not less than 0.380 kg DSR 0411
8
205
1640
... More
PLUMBING AND SANITARY INSTALLATIONS
-
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid 17.2.1
6
5146
30881.88
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required DSR 17.4
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern DSR 17.4.2
3
7593
22780.05
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap DSR 17.7.2
9
1758
15828.39
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge DSR 17.16A
6
275
1654.86
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.16A
9
94
849.96
... More
Providing and fixing toilet paper holder : C.P. brass DSR 17.34.1
6
634
3809.34
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms DSR 17.71
9
132
1196.91
... More
Providing and fixing hand dryers in male and female toilets MR
6
16492
98955
... More
Supply & fixing of urinal partition for half stall urinals. (Jaquar or equivalent) MR
6
2610
15660
... More
Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. PWD 17.31
9
1270
11431.89
... More
WATER SUPPLY AND FITTINGS
-
-
-
... More
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. Internal work exposed on wall
40mm nominal outer dia pipes: PWD 18.7.5
40
555
22212
... More
50mm nominal outer dia pipes PWD 18.7.6
20
737
14758.6
... More
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chase and making good the wall etc.
15mm nominal outer dia pipes PWD 18.8.1
30
393
11797.2
... More
20mm nominal outer dia pipes PWD 18.8.2
16
424
6794.88
... More
25mm nominal outer dia pipes PWD 18.8.3
10
495
4955
... More
32mm nominal outer dia pipes PWD 18.8.4
10
584
5840.1
... More
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore DSR 18.17.3
4
652
2610.32
... More
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 50 mm nominal bore DSR 18.17.4
2
811
1622.02
... More
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. 45 cm length: 15mm nominal bore DSR 18.21.2.1
16
77
1235.52
... More
Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931. : PWD 18.49.1
6
400
2402.1
... More
Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. PWD 18.50.1
6
648
3889.86
... More
Providing & fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. PWD 18.52.1
6
529
3177.72
... More
Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931. PWD 18.53.1
6
453
2722.02
... More
Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design DSR 18.32.1
4
1574
6296.24
... More
Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm. size P type PWD 19.4.2.1 &19.4.2
4
2159
8639.56
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. PWD 18.48
6000
8
52140
... More
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge.
PN - 10 Pipe, 50 mm OD (SDR-11) DSR 18.6.5
16
356
5699.68
... More
PN - 10 Pipe, 75 mm OD (SDR-11) DSR 18.6.7
20
550
11008
... More
PN - 10 Pipe, 110 mm OD (SDR-11) DSR 18.6.9
16
1028
16448.16
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper
conductor single core cable etc. as required. Group A (DSR 1.1.1)
40
963
38534.8
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required: 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR 1.7.2
180
291
52405.2
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 16 sq. mm + 1 X 6 sq. mm earth wire DSR1.7.6
90
773
69591.6
... More
Supplying and fixing following Suitable size GI Box with Moudular plate and cover in front on surface or recess, including providing and fixing 2 nos 3 pin 5/6 A moduler socket outlet and 2 nos. 5/6 A moduler switch, connection etc. as required. ( for light pluges to be used in non residentions, painting etc. as required. DSR 1.56
15
533
8000.4
... More
Supplying and fixing PVC batten/ angle holder including connections etc as required. DSR 1.58
15
86
1301.85
... More
Supply and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. : 5/6 A Switch DSR 1.24.1
55
81
4469.85
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. : 6 Module 200mmX75mm) DSR 1.27.4
18
317
5709.24
... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required. : 25 mm DSR 1.21.2
120
144
17329.2
... More
Installation ,Testing, Commissioning of wall brack/ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. DSR 1.35
15
93
1408.35
... More
Supplying and fixing following way, Horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 4 way(4+12) , Double door DSR 2.4.1
3
3227
9683.4
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 16 way , Double door DSR 2.3.4
3
2478
7434.75
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.: Single Pole DSR 2.10.1
6
201
1211.88
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. DSR 2.11
6
10
61.56
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe et DSR 5.2
3
5408
16225.8
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as DSR 5.3
3
4935
14807.94
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) DSR 5.9
22
113
2499.64
... More
Supply & erection of AC 230/250 volts 50 hz Exhaust fans including provding nut bolts mounting frame and other accessories including connection etc complete as required as per direction of E /I make:- Havell's / Cromption / USHA: 300 mm Sweep 900 RPM MR
6
1800
10800
... More
Supply ofrecess/Surface/Pendent mounting round 12 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects. (Of approved make) MR
30
1350
40500
... More
Water Purifier and Cooler 1 in nos.
-
-
-
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kind of soil. (0.0 to 0.30 m DSR 2023/2.6.1
1.8
140
252.4
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 DSR 2023/4.1.8
0.18
5381
968.61
... More
12 mm thick plaster in 1:4 (1cement:4coarse sand) (DSR SOR 2021-SI-13.4)
0.55
282
155.25
... More
Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. DSR 16.68
1.8
767
1382.09
... More
Aqua soft RO Plant250 LPH PSR BOND NO. CE/490/2024
1
134991
134991
... More
Surise water cooler 200 LTR FSS PSR BOND NO. CE/490/2024
1
56990
56990
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes
making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.DSR 2023 / 18.48A
1000
8
8690
... More
Bill of Quantities - CANTEEN
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kinds of soil. DSR 2.6.1
27
140
3785.94
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8
3.12
5381
16789.22
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.1.2
4.03
7145
28797.25
... More
RReinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.2.2
5.76
8573
49382.32
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR 5.3
17.23
9088
156600.2
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc for mass concrete DSR 5.9.1
18.24
309
5650.39
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, abutments, posts and Struts DSR 5.9.6
57.6
759
43740.29
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers DSR 5.9.5
112.02
581
65164.27
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) DSR 6.4.1
30.36
7381
224105.38
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR 13.4.1
252
282
71137.08
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80
262.8
123
32395.36
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR 13.47.1
132
135
17841.12
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer DSR 13.41.1
157.2
146
23053.38
... More
Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. PWD 16.64
25.2
157
3968.5
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 11.3.1 40 mm thick with 20 mm nominal size stone aggregate DSR 11.3
28.42
485
13789.1
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 1200 mm DSR 11.41A.3
25.2
1245
31395.92
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.DSR 11.46.2
3.3
1282
4231.03
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.
(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm.
(c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.
(d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately.
For the purpose of measurement the entire treated surface will be measured. PWD 22.6
28.42
544
15466.16
... More
Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the work and including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level.
150.21
7150
1074001.5
... More
WIRING POINTS CANTEEN
-
-
-
... More
Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in heavy gauge rigid steel conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G copper earth continuity wire & piano type switch etc. complete in all respects. PWD SOR 138 (B)
12
810
9720
... More
Same as in item no. 1 but for fan. and light duty exhaust fan PWD SOR 140 (B)
4
904
3616
... More
Same as in item no. 1 but for 5 amp plug point with piano type switch & socket etc. PWD SOR 141 (B)
4
422
1688
... More
Add for light / fan points with modular type switches in place of piano type switches PWD SOR 187 (A)
10
44
440
... More
Add for plug point with modular switch & socket in place of piano type switch & socket PWD SOR 187 (C)
6
83
498
... More
Supply & fixing of power plug with 20 amp 250 volts flush type modular switch and 5 pin 20 amp 250 volts flush type universal modular socket on concealed MS box including supply of all material, labour T&P etc. required for proper completion of work PWD SOR 139 (A)
4
625
2500
... More
MAINS & SUBMAINS
-
-
-
... More
Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge rigid steel coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with one no. 14 SWG copper earth continuity wire complete in all respects.
-
-
-
... More
2 x 4 sq. mm. In 20 mm dia conduit. PWD SOR 221 (B)
110
221
24310
... More
2 x 10 sq. mm. In 25 mm dia conduit. PWD SOR 223 (B)
50
376
18800
... More
DISTRIBUTION BOARDS & CIRCUIT BREAKERS
-
-
-
... More
S/F of surface / flush mounting SPN Distribution board (Legrand Lexic) without MCB complete in all respects as directed at site by Engineer-in-charge. : 12 WAYS CAT-B PWD SOR 1025A
2
1850
3700
... More
Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) (Legrand Lexic) PWD SOR 1002
10
260
2600
... More
S/F of 40 Amp DP MCB (10 KA) (Legrand Lexic) 1010
2
1180
2360
... More
S/F of sheet steel enclosure for DP / TP / FP MCB with neutral link and earth terminal. CAT-B PWD SOR 1033
2
550
1100
... More
EARTHING
-
-
-
... More
Supply & burrying of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnel for watering and one earthing lead of no. 8 SWG G.I. wire in 15 mm dia. GI pipe upto switch board (from apron to switch board the cost of GI pipe & GI wire will be extra) 300mm square C.I. box with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect . PWD SOR 703
2
5380
10760
... More
Supplying & Laying of one number 8 SWG G. I. wire in 15 mm. dia. G. I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P and other material required for proper completion of the work as directed at site. PWD SOR 721
70
200
14000
... More
CABLES
-
-
-
... More
Supply and laying of ISI marked aluminium conductor PVC / XLPE insulated armoured, served, sheathed cable 1100 volts grade at 750 mm below ground level over a cushion of 75 mm thick sand around & protected with brick on sides & top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.: 10 sqmm 2 core PWD SOR 501
75
292
21900
... More
Supply fixing of plam or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connections etc. complete in all respects as per direction of Engineer-in-charge.: 10 sq.mm. PWD SOR 504
50
20
1000
... More
Supply and fixing brass nickle plated compression glands for PVC insulated armoured, served, sheathed cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth conductor.: 10 sqmm 2 core PWD SOR 503
16
80
1280
... More
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. PWD SOR 1120
4
195
780
... More
Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. PWD SOR 1122
8
810
6480
... More
Supply & fixing of recess/surface/ pendent mounting round10 to 15 watt LED Down lighter having powder coated die cast aluminium housing with heat silk, diffuser/ reflector and driver set complete in all respect. PWD SOR 1402
20
1350
27000
... More
Supply & fixing of LED tube light with batten suitable for upto 1x22 watt LED tube light fittings including tube on surface complete in all respect Cat- AAA PWD SOR 1413
4
1190
4760
... More
Supply & fixing of recess/ surface mounting round 24 watt to 32 watt LED down lighter having powder coated die cast alumnium housing with extended heat sink, diffuser / Reflector and driver set completed in all respect. PWD SOR 1404
4
3500
14000
... More
PART (B) -- NON SCHEDULED ITEMS (AS PER MARKET RATES)
-
-
-
... More
Supply of AC 230/250 volts, 50 HZ fresh air fans including providing nuts, bolts, mounting frame and other accessories etc. complete : (Make : Bajaj / Usha / newtek / Havells): 300 mm sweep
-
-
-
... More
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete : (Make : Bajaj / Crompton / Havells) 300 mm sweep 900 rpm
2
1800
3600
... More
PLUMBING WORKS-CANTEEN ACCESSORIES
-
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : PWD 19.7 (DAR17.10)
2
5486
10973.4
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. : 32 mm dia (for wash basin) PWD 17.28.1.1
2
82
164.16
... More
WATER SUPPLY PIPES AND FITTINGS
-
-
-
... More
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.: Internal work exposed on wall
-
-
-
... More
40mm nominal outer dia pipes PWD SOR 18.7.5
100
555
55530
... More
50mm nominal outer dia pipes PWD SOR 18.9.6
50
627
31371
... More
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chase and making good the wall etc.
-
-
-
... More
15mm nominal outer dia pipes PWD SOR 18.8.1
80
393
31459.2
... More
20mm nominal outer dia pipes PWD SOR 18.8.2
40
424
16987.2
... More
25mm nominal outer dia pipes PWD SOR 18.8.3
30
495
14865
... More
32mm nominal outer dia pipes PWD SOR 18.8.4
20
584
11680.2
... More
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
-
... More
40 mm nominal bore PWD SOR 18.17.3
4
652
2610.32
... More
50 mm nominal bore( DSR 18.17.4( Rates factored by .8667 ( as per UP SOR Calculation Method)
4
811
3244.04
... More
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. ( DSR 18.21.2.1( Rates factored by .8667 ( as per UP SOR Calculation Method)
20
77
1544.4
... More
Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931. PWD SOR 18.49.1
4
400
1601.4
... More
Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. PWD SOR 18.50.1
4
648
2593.24
... More
Providing & fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. PWD SOR 18.52.1
4
529
2118.48
... More
Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931. PWD SOR 18.53.1
4
453
1814.68
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern PWD SOR 17.4.4
2
14677
29354.58
... More
Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design DSR 18.32.1( RATES FACTORED WITH .8667 AS PER LUCKNOW SOR)
4
1574
6296.24
... More
Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm. size P typePWD 19.4.2.1 &19.4.2
6
2159
12959.34
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms DSR 17.70.1( RATES FACTORED WITH .8667 AS PER LUCKNOW SOR)
2
289
579.98
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. DSR 17.72( RATES FACTORED WITH .8667 AS PER LUCKNOW SOR)
2
183
366.46
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. PWD 18.48
6000
8
52140
... More
SUPPLY OF SANITARY FIXTURES, ACCESSORIES AND BATHROOM FITTINGS
-
-
-
... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. (Make : Supreme / Finolex / Prince)
-
-
-
... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
30
440
13200
... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
30
315
9450
... More
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. (Make : Supreme / Finolex / Prince): 50 mm dia.
20
105
2100
... More
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince): P-Trap type Floor Trap 110 x 75 mm
10
580
5800
... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
4
124
496
... More
Providing & fixing 50 mm. dia. G.I elbow (drain point) in the toilet floor including 50 mm dia. C.P. waste jali complete as required.
8
318
2546.24
... More
BILL OF QUNATITY FOR WOODEN GAZEEBO NANDAN VAN
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil 2.6.1
81
140
11357.82
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8, 4.1.8
8.1
5381
43587.4
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but Excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All Work Above Plinth Level DSR 5.37.2.1
36.18
7508
271650.66
... More
Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated Bars
56.8
7150
406120
... More
Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. completeDSR 11.35
172.8
140
24271.49
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
792
105
83651.04
... More
Providing wood work in frames of / Railing / false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood 9.3.1
17.4
82751
1439868.1
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete DSR5.9.1
165.6
309
51299.57
... More
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 13.4.2
123.84
271
33618.84
... More
25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood DSR 11.33.1
144
3561
512907.84
... More
French spirit polishing : Two or more coats on new works including a coat of wood filler DSR 13.68.1
862.01
352
303875.77
... More
Ayurveda park Sprinkler system (Irrigation)
-
-
-
... More
DSR 2.10, Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning
the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and
disposing of surplus excavated soil as directed, within a lead of 50 m :2.10.1 All kinds of soil
2.10.1.1 Pipes, cables etc, not exceeding 80 mm dia.
3500
170
596085
... More
Supply of following sizes pipes for distribution system conforming to latest/relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest/relevant I.S. specifications including F.O.R destination and all taxes and insurance etc. with loading unloading and carting up to site of work also including specials for these pipes and lowering them into trenches and laying true to alignment and gradient and jointing etc, complete(including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of Engineer-in charge 33.01 (Jal Nigam Varanasi SOR) 90 mm dia HDPE Pipe PN-6: ClassPE-100
1400
254
355600
... More
33.01 (Jal Nigam Varanasi SOR) 63mm dia HDPE Pipe PN-6: ClassPE-100
2100
146
306600
... More
Supply, Installation, laying & commissioning of HDPE Flange with tail piece, packing & nut bolt complete in all respect. Sanctioned rate
20
3000
60000
... More
Supply, Installation, laying & commissioning Of reducer 90 mm to 63 mm outer dia 6Kg/cm2 HDPE pipe. Sanctioned rate
20
85
1700
... More
Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 90 mm HDPE pipe. Sanctioned rate
20
204
4080
... More
Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 63 mm HDPE pipe. Sanctioned rate
20
112
2240
... More
Supply, Installation, laying & commissioning Of TEE JOINT 90 DEGREE FOR 90 mm HDPE pipe. Sanctioned rate
75
215
16125
... More
Supply, Installation, laying & commissioning Of TEE JOINT 90 DEGREE FOR 63 mm HDPE pipe. Sanctioned rate
50
118
5900
... More
Supply, Installation, laying & commissioning Of for 63 mm TAIL PIECES. Market Rate
50
52
2600
... More
Supply, Installation, laying & commissioning of for 90 mm TAIL PIECES HDPE PIPES. Market Rate
50
107
5350
... More
Supply, Installation, laying & commissioning Of PRESSURE Gauge 2.5" size (Gyceryne). Market Rate
4
580
2320
... More
3" disc filter. Market Rate
4
7100
28400
... More
2" disc filter. Market Rate
4
3778
15112
... More
Thermos Temperature Controller wuth switch and socket .2 mm cable. Market Rate
4
1100
4400
... More
Butt velding electric heating plate. Market Rate
4
6100
24400
... More
3" CI butterfly valve. Market Rate
4
1995
7980
... More
2" CI butterfly valve. Market Rate
4
1415
5660
... More
SPRINKLERS
-
-
-
... More
Supply, Installation, laying & commissioning of Service Saddle 3 inch x 1.25 inch. Sanctioned rate with bush
200
300
60000
... More
Supply, Installation, laying & commissioning of Service Saddle 2 inch x 1.25 inch. Sanctioned rate with bush
200
230
46000
... More
Supply, Installation, laying & commissioning of Swing Joint for 10 - 12 meter range 360 degree popup. Market Rate
200
232
46400
... More
Supply, Installation, laying & commissioning of Swing Joint for 3 - 4 meter range 360 degree popup. Market Rate
200
210
42000
... More
Supply, Installation, laying & commissioning of 25 mm outer dia 6Kg/cm2 CPVC pipe. Market Rate
200
210
42000
... More
Supply, Installation, laying & commissioning Of Ball Valve for 25 mm pipes. Market Rate
60
286
17181
... More
Supply, Installation & commissioning of pop sprinkler plastic make material with 3 - 4 meter range 360 degrees
MR
200
255
51000
... More
Supply, Installation & commissioning of pop sprinkler plastic make material with 10- 12 meter range 360 degrees. Market Rate
200
1975
395000
... More
Engagement of Plumber for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter. Rs. 420.00+10%CP
50
462
23100
... More
Engagement of Labour for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter. Rs. 335.00+10%CP
50
368
18425
... More
3 - BORING
-
-
-
... More
Boaring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS : 2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer In charge, up to 150 meter depth below ground level. 300 mm dia
All type of soil (DSR 23.2.1.1 based)
300
652
195678
... More
Supply, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS: 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 200 mm nominal size dia
DSR No. 23.3.3
300
879
263847
... More
Supply, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 200 mm nominal size dia
DSR No. 23.4.3
300
991
297582
... More
Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm in the recharge pit, over the existing layer of boulders, in required thickness for all leads & lifts all complete as per direction of Engineer in charge. DSR 23.6
29.4
1215
35725.41
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for bore well of: 200 mm dia. DSR No. 23.13.3
3
253
761.07
... More
Providing & Fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS 2800 part - 1 including necessary bolts & nuts of required size complete. 200 mm clamp. DSR No. 23.14.3
3
1811
5435.64
... More
Supply and fixing of pump set & composite electric panel for submersible kirloskar/ sons/ crompton openwell pumpset greeves make three phases 380-440 v 50 cycles supply with fountain bolts and 3 core 2.5 mm flat PVC flexible copper conductor double insulated submersible cable and 4 core 1.5 mm form fountain pool to fountain electric panel etc fountain pool to fountain electric panel etc. complete with internal wiring lighting system.
-
-
-
... More
7.5 HP pump
3
41260
123780
... More
Electric Panel Box
3
9000
27000
... More
Supply and fixing of 3 HP single phase open well submersible pump set of 50 mm x 50 mm pipe size complete with all material, labour T&P etc all as per direction of Engineer in charge. (make kirloskar/ crompton/ KSB PSR
3
26504
79512
... More
Supply and fixing of 2.5 sqmm 2 core PVC insulated PVC shethed flate submersible cable pump with bare bunched copper conductor for submersible pump motor with 1100 volt grade ISI marked all complete as per direction of Engineer in charge. UPPPCL COST SCHEUDLE 2021-2022, SL NO. 19(II)
200
125
25000
... More
Engagement of Plumber for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter. Rs. 420.00+10%CP
300
462
138600
... More
Arrangement of Plumber for 1 year maintenance. PWD SOR 2020-21
365
462
168630
... More
NANDAN VAN EXTERNAL ELECTRICAL SYSTEM Part E (Electrical)
-
-
-
... More
PART (X)
-
-
-
... More
Supply and fixing of 4000mm Simple decorative steel poles are made out of mild steel galvanized rebbed extrusion profile having bottom section dia125mm and upper section dia 81mm with cast iron embellishment e8 & with having for twin nos bracket. The pole have a service window at bottom section wih heavy duty four way connector and a mcb. Mild steal base plate with four nos. mounting holes is fixed and welded with bottom section . pole is primer coated and polyurethene painted .
90
17780
1600200
... More
Supply and fixing of OVER 600 mm long aluminium dia cast body post top is mounted at the top with polycarbonate diffuser and fitted with 40w led disc bis registered make philips , bajaj, twinkle, lustore or equivalent repuateted make Quotation rates
90
27550
2479500
... More
Supplying Testing & Installation of Garden Spike Light 12W WW Make Philips/ Wipro/ Twinkle etc all complete of direction of engineer in charge.
40
1800
72000
... More
Supply and fixing of decorative 12 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. Approx. 2 ft HeightMake Philips/ k light/Twinkle
60
9250
555000
... More
S/E of G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects SI.No. 628/18. PWD E/I 2018
5000
66
330000
... More
S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by E/I. SI. No. 289/18.
2000
55
110000
... More
S/F of 40A TPN of Automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc, in case of TPN, complete in all respect as per direction of Engineer-in-charge. SI. No. 807/18 e(ii).
35
29300
1025500
... More
S/L of following cable "Al" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipe approved make UPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501
-
-
-
... More
10 sq. mm 4 core
1500
327
490500
... More
(a) 35 Sq.mm 3.5Core
1000
373
373000
... More
(b) 16 Sq.mm 4 Core
1800
343
617400
... More
(c) 70 Sq.mm 3.5 core
50
613
30650
... More
S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/I.SI.No.504/SOR-18.
-
-
-
... More
10 sq. mm 4 core
80
20
1600
... More
(a) 25 sq.mm.
80
27
2160
... More
(b) 50 sq.mm
80
48
3840
... More
(c) 16 sq.mm
100
21
2100
... More
S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. For singel support ANNEXURE 6 - SL NO. 17
100
565
56500
... More
S/F of 6 Amp to 32 Amp. SPMCB (10KA) C curve complete in all respect as per direction of Engineer-in-charge. SI No. 1002/18. CAT-A.
100
260
26000
... More
( Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TNP-2 Nos. Cat. B. Cubicle Type PWD SI No : 802 (a) Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc.
The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. ( Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TNP-2 Nos. Cat. B. Cubicle Type PWD SI No : 802 (a)
2
76700
153400
... More
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PWD SI No :725 (A)
4
6450
25800
... More
Supply and Laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. 33.01 (Jal Nigam Varanasi SOR) 63mm dia HDPE Pipe PN-6: ClassPE-100
2000
146
292000
... More
JAL NIGAM VARANASI SOR ITEM 12 Supply, Installation, testing & commissioning of Servo Stabilizer (150-460v range with protection devices for high voltage Cut off, overload Protection included OIL filling, earthing and power wiring etc. job complete in all respect with all required material , T&p Labour 60 KVA ( 12.09 )
1
345000
345000
... More
PLINTH AREA RATES CPWD 2023, Supply installation , testing and commissioning of IP based CCTV system for building security comprising of PTZ/FIXED CAMERA, CABLING , RECORDING , DISPLAY SYSTEM HARDWARE SOFTWARE SUPPORT, FOR EXTERNAL SURVILLANCE 6.10.2 , FOR ENTRY AREA ONLY
1160
210
243600
... More
Operation and maintenance for 1 years
2.50% on Part-X
1
220893
220893.75
... More
PART (Y)
-
-
-
... More
LFkkfir dh x;h ykbZVksa ds vuqj{k.k ,oa lapkyu dk dk;ZA
-
-
-
... More
Providing of Trained Electricion With Tool Kit (As per PWD SOR/2020-2021 (365 x2=730 days x3 Nos= 2190Days)
365
400
146000
... More
Providing of Helper Technicion (As per PWD SOR/2020-2021 (365 x3=730 days x3 Nos= 2190 Days)
365
325
118625
... More
Making electrical connections of 35 KW and payment to UPPCL (All charges included) L.S. The Final amount will be calculated only after the consultation with the UPPCL and to be paid directly by the department to UPPCL
1
2000000
2000000
... More
FOUNTAIN WORK
-
-
-
... More
SITC of Spray comprises of a Calyx Aerating in center flanked with Foam Jets on 4 corners of waterbody. Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized. High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure. Proper completion of work As per direction of E/Ic FOR A 6 METER DIA WATERBODY make as per attached quotations
2
720528
1441056
... More
SITC of In Calyx Aerating Spray, water is sprayed in an inverted cone pattern with a small center jet. Calyx nozzle made of aluminium alloy – epoxy coated/Stainless Steel, center jet nozzle made of brass – chrome plated. Approx. height of water effects: Calyx – 1.25m height X 4.5m dia, Center Jet – 3m height. Proper completion of work As per direction of E/Ic, FOR A 6 METER DIA WATERBODY PSR make as per attached quotations
2
56000
112000
... More
SITC of Foam jet nozzle, on ball joint, of 1.25” orifice size. Nozzle made of
Brass- Chrome plated. Approx. height of water effects: 1.2m. Proper completion of work As per direction of E/Ic, FOR A 6 METER DIA WATERBODY PSR make as per attached quotations
12
10800
129600
... More
Supply, Installation, Testing and Commissioning of Luminaries comprise of 12V LED lights (RGB). Complete light body made of Stainless steel 304 grade, total 27watt power leds. Toughened glass with seal. Stainless steel 304 grade cable gland. All external nuts and bolts are of Stainless steel 304 grade. Adjustable mounting bracket is made of Stainless steel 304 grade. IP 68 compliant. All 'in pool' connections shall be fully waterproof. Make of Luminaries As per direction of E/Ic, FOR A 6 METER DIA WATERBODY PSR make as per attached quotations
12
26200
314400
... More
SITC of Monoblock type submersible pump set whit stainer/ filter of Following Capacity (Three phase, 50Hz, 415-380V AC) proper completion of work as per direction of E/Ic. Kirloskar/Crompton Greaves/KSB/Texmo. Suction filter for pump: Filter body & filter mesh made from AISI 304 standard stainless steel. As per direction of E/Ic PSR LDA ATTACHED
-
-
-
... More
3 HP ( psr attached)
3
26504
79512
... More
SITC of 1.1 kV grade double insulated copper flexible cable 2.5 sq.mm x 4 core for pumps,As per direction of E/Ic UPPCL COST SCHEDULE ANNEXURE 10 SI NO. 19 (i)
150
322
48300
... More
SITC of 1.1 kV grade double insulated copper flexible cable 2.5 sq.mm x 2 core for lights, As per direction of UPPCL COST SCHEDULE ANNEXURE 10 SI NO. 19 (i)
150
183
27450
... More
PSR Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain, pumpset andRGB Sequencing lighting comprises of :
1. Contactor 25 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. DOL Starter - 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 01 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 20 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 6-12 Amp- 01 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 03 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -01 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 02 Nos. 9. Overload Indicator - 01 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 01 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 01 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 01 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 01 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 01 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 10, size of panel - 3ft X 2ft X 1ft depth.As per direction of E/Ic
1
144000
144000
... More
Supply of 3000mm Extruded Square aluminum pole (grade 6063) Sq. 150 x 3mm thickness with IP68 Connector.
Bespoke laser cutting design of length 1400mm with 50W In-Built LED with controlled downward light emission options (customized) with SS fasteners, Pre treated epdm black gaskets. Die-cast aluminum mounting plate Sq.250 x 12mm thick with 4 elongated holes 38 x 19 to suit M16 bolts at PCD 180 with pure polyester powder coating. Fixed with Hot dip galvanized foundation bolt. Mechanical resistance should be minimum IK06. The Pole should be undergone pure polyester powder coating process & Acid treatment to ensure high corrosion resistance. On the top of the pole there will be built-in Spot Lights of 2 x 18W LED are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency 85%, power factor 0.9, THD 10%, Inbuilt Surge protection 6KV. Optical grade clear toughened glass diffuser of 4mm thickness with controlled downward light emission. Colour Temperature LED 3000K, 230-240Vac, CRI 80, MacAdam step 3. The driver should be inbuilt in the pole itself and maintenance can be done from the junction box itself. PDC aluminum service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. The manufacturer should have Inhouse NABL accredited lab to check and provide correct photometry of the product. The make should be as per K-Lite Verbena Spot KL-4583/Wipro/Ligman
12
65250
783000
... More
AYURVEDA PARK HORTICULTURE 26700 sqm PART C HORTICULTURE WORK
-
-
-
... More
Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed
and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account.
(a) Girth of tree shall be measured at a height of 1m above ground level./DSR Horticulture 2020;12.1Girth of trees upto 50cm./12.1.1
20
3748
74972.2
... More
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5 m. (for all areas)/DSR Horticulture 2020;2.28.1
26700
24
657621
... More
Supplying and stacking of good earth at site including royalty and carriage upto 10 km lead complete (earth measured in stacks will be reduced by 20% for payment). PWD SOR /PSR
2670
354
946381.5
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment)./DSR Horticulture 2020; 2.25
667.5
256
170986.8
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge/DSR Horticulture 2020; 2.9
667.5
37
25251.52
... More
Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately)./DSR Horticulture 2020; 2.8
667.5
54
36165.15
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with
sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)./DSR Horticulture 2020; 2.1
8010
80
647448.3
... More
Rough dressing the trenched ground including breaking clods./DSR Horticulture 2020; 2.6
26699.85
1
41384.77
... More
Fine dressing of the ground./DSR Horticulture 2020; 2.7
26700
3
102261
... More
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods,
watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge./DSR Horticulture 2020; 2.28
100
472
47232
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume
of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)Holes 60 cm dia, and 60 cm deep./DSR Horticulture 2020; 2.14.4
340
148
50357.4
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding
cast of plant & water)/DSR Horticulture 2020; 2.57
-
-
-
... More
Trees Plant/2.57.1
1100
7
8316
... More
Shrubs Plant/2.57.2
1400
3
5292
... More
Hedge Plant/2.57.3
32000
2
81280
... More
HEDGE /
-
-
-
... More
Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge./DSR Horticulture 2020; 8.46
20000
15
310600
... More
Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge./DSR Horticulture 2020; 5.3
20000
42
848800
... More
Providing and stacking of Ficus long Island of height 15 cm to 20 cm, full of branches and foliage in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge./DSR Horticulture 2020; 8.29
10000
46
465800
... More
Providing and stacking of Rhoeo of height 20-25 cm., multibranched in earthen pots of size 20 cm as per direction of the officer-in-charge./PSR
10000
50
500000
... More
Providing and displaying of Spathiphyllum (peace Lilly), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cm of Earthen pot/plastic pot & as per direction of the officer-in-charge./DSR Horticulture 2020; 3.9
9000
95
859320
... More
Providing and displaying of Syngonium golden plant, mounted on moss stick 90 cm ht., 3 to 4 plants placed in each pot at equal distance, well developed with full of fresh & healthy leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge./DSR Horticulture 2020; 3.91
4970
200
996634.1
... More
Providing and displaying of Syngonium Varieged plant, mounted on moss stick 90 cm ht., 3 to 4 plants placed in each pot at equal distance, well developed with full of fresh & healthy leaves from bottom to top in 25 cm size of Earthen pot/Plastic pot & as per direction of the
officer-in-charge./DSR Horticulture 2020; 3.92
5000
200
1002650
... More
Providing and stacking of of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge./DSR Horticulture 2020; 6.10
5000
20
103500
... More
Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cm of Earthen pot/plastic pot as per direction of officer-in-charge./DSR Horticulture 2020; 3.90
5000
95
477400
... More
Providing and Displaying Topiary of Casuarina fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge./DSR Horticulture 2020; 5.41
100
1113
111392
... More
Providing and Displaying Ficus Retusa topiary well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210 cm ht in 40 cm Cement Pot as per direction of the officer-in-charge./DSR Horticulture 2020; 5.24
100
2227
222784
... More
Providing and Displaying Ixora topiary./Quotation Rate
200
15
3000
... More
Providing and stacking of Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of the officer-in-charge./DSR Horticulture 2020; 8.48
200
113
22770
... More
Providing and Displaying Topiary plant of Ficus Panda well developed with fresh & healthy foliage with 3 to 4 Ball and 60 to 75 cm spread each Ball, 135 to 150 cm ht., in 35 cm Cement Tray /Cement Pot as per direction of the officer-in-charge./DSR Horticulture 2020; 5.40
100
1166
116696
... More
Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type well developed in 50 cm Cement Pot as per direction of the officer-in-charge./DSR Horticulture 2020; 5.9
500
1485
742615
... More
Providing and stacking Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge./DSR Horticulture 2020;4.89
2500
37
92900
... More
Providing and stacking of Ophiopogon, Green/Black full of leaves in 15 cm size of Earthen
Pot / Plastic Pot & as per direction of the officer-in-charge./DSR Horticulture 2020;6.19
2000
20
41400
... More
Providing and stacking of Ophiopogon jaburan (variegated ), full of variegated leaves in 15
cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge./DSR Horticulture 2020;6.2
5000
20
103500
... More
Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. s per direction of the officer-in-charge./DSR Horticulture 2020;8.14
2000
36
72460
... More
Providing and stacking of Tabernaemontana divaricata (Chandni double) of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge./DSR Horticulture 2020;8.66
1000
93
93150
... More
SHRUBS/
-
-
-
... More
Providing and stacking Syzygium of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. /Market Rate
200
538
107640
... More
Providing and stacking of Cassia biflora of height 90-105 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge./DSR Horticulture 2020;8.1
2000
103
207000
... More
Providing and stacking of Tecoma gaudichaudi of height 90-105 cm.,bushy in big size HDPE bag as per direction of the officer-in-charge./DSR Horticulture 2020; 8.69
2000
113
227700
... More
Providing and stacking of Bauhinia acuminata of height 60-75 cm. in earthen pots of size 20
cm as per direction of the officer-in-charge./DSR Horticulture 2020; 8.1
2000
46
93160
... More
Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of
size 20 cm as per direction of the officer-in-charge./DSR Horticulture 2020; 8.2
2000
46
93160
... More
Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in
big size HDPE bag as per direction of the officer-in-charge./DSR Horticulture 2020; 8.7
2000
93
186300
... More
Providing and stacking of Caesalpinia pulcherrima species of height 45-60 cm. in earthen pot
of size 20 cm as per direction of the officer-in-charge./DSR Horticulture 2020; 8.4
500
46
23290
... More
CREEPERS /
-
-
-
... More
Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 9.1/
100
46
4658
... More
, Providing and stacking of Bignonia venusta (Golden shower) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.9.3/
100
41
4140
... More
Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge., 9.10/
100
36
3623
... More
Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge., 9.12/
100
25
2588
... More
Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge., 9.14/
100
25
2588
... More
Providing and stacking of Petra volubilis of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge., 9.11/
100
49
4968
... More
TREE /
-
-
-
... More
Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers, well developed, fresh and healthy with lush green foliage in
35 cm size of Bucket type cement pots & as per direction of the officer-in-charge./DSR Horticulture 2020;3.22
100
613
61319
... More
Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as
per direction of the officer-in-charge./DSR Horticulture 2020;5.11
50
2005
100252.5
... More
Providing and stacking of Jacaranda mimosifolia of height 10-12 feet in big poly bags of size 18" as per direction of the officer-in-charge. /Market Rate
50
400
20000
... More
Providing and stacking of Tabebiua healthy and multi branches of ht.10-12 feet in Earthen pots of size 12" as per direction of the officer-in-charge. /Market Rate
50
525
26250
... More
Providing and stacking of Delonix Regia healthy and multi branches of ht.10-12 feet in Earthen pots of size 12" as per direction of the officer-in-charge. /Market Rate
50
475
23750
... More
Providing and stacking of Plumeria alba healthy and multi branches of height 10-12 feet in big poly bags of size 18" as per direction of the officer-in-charge./Market Rate
50
900
45000
... More
Providing and stacking of Cassia Fistula and multi branches of ht.10-12 feet in Earthen pots of size 12" as per direction of the officer-in-charge. /Market Rate
50
525
26250
... More
Providing and stacking of Cassia Javanica and multi branches of ht.10-12 feet in Earthen pots of size 12" as per direction of the officer-in-charge. /Market Rate
50
525
26250
... More
Providing and stacking of Plumeria Rubra healthy and multi branches of height 10-12 feet in big poly bags of size 18" as per direction of the officer-in-charge./Market Rate
50
900
45000
... More
Providing and stacking of Chorisia Speciosa t in big poly bags of size 18" as per direction of the officer-in-charge./Market Rate
50
2000
100000
... More
Providing and stacking of Terminalia Mentali healthy and multi branches of height 10-12. in big polybags of size 18" as per direction of the officer-in-charge. /Market Rate
50
1500
75000
... More
Providing and stacking of Cassia Biflora healthy and multi branches of height 10-12. in big polybags of size 18" as per direction of the officer-in-charge. /Market Rate
50
800
40000
... More
Providing and stacking of Royal Palm (Roystonea regia) healthy and multi branches of height 10-12. in big polybags of size 18" as per direction of the officer-in-charge./Market Rate
50
1500
75000
... More
Providing and stacking of Schleichera trijuga (Kusum) of height 150-165 cm. in big poly bags
of size 25 cm as per direction of the officer-in-charge./DSR Horticulture 2020;7.81
50
72
3622.5
... More
Providing and stacking of Spathodea campanulata of height 150-165 cm. in big poly bags of
size 25 cm as per direction of the officer-in-charge./DSR Horticulture 2020;7.82
50
77
3881
... More
Providing and stacking of salix 10 - 12 ft y in height ,bushy helathy in big size HDPE bag as per direction of the officer-in-charge/MR
50
1500
75000
... More
Providing and stacking of Magnolia grandiflora of height 150-165 cm. in big
poly bag of size 25 cm as per direction of the officer-in-charge.v/7.52 DSR HOT 2020
50
393
19665
... More
MEDICINAL/SPICES/GRASS/TREES/
-
-
-
... More
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge DSR Horticulture 2020; 2.34/DSR Horticulture 2020; 2.34
20000
90
1811200
... More
11.1 Providing and Stacking of Anjeer of height 75-90 cm. in poly bags of size 25 cm as perdirection of the officer-in-charge./11.1
30
155
4657.5
... More
Providing and Stacking of Curry leaf of height 75-90 cm in poly bag of size 25 cm as perdirection of the officer-in-charge./11.2
300
77
23286
... More
Providing and Stacking of Ashwagandha of ht. 30 cm with multi branches
in Poly bag of size 20 cm.as per direction of the officer-in-charge./11.3
300
51
15525
... More
Providing and Stacking of Kalmegh of ht. 30 cm with multi branches in
Poly bag of size 20 cm. as perdirection of the officer-in-charge./11.4
300
31
9315
... More
Providing and Stacking of Adusha of ht. 30 cm with multi branches in
Poly bag of size 20 cm. as per direction of the officer-in-charge./11.5
300
31
9315
... More
Providing and Stacking of Satavari, well developed in earthen pot of size
20 cm as per direction of theofficer-in-charge./11.6
300
31
9315
... More
Providing and Stacking of Tulsi of ht. 30 cm with multi branches in Poly
bag of size 20 cm. as per direction of the officer-in-charge./11.7
300
20
6210
... More
Providing and Stacking of Alovera well developed in earthen pot of size
20cm as per direction of the officer-in-charge./11.8
300
51
15525
... More
Providing and Stacking of Bryophyllum of ht. 30cm with multi branches in
Poly bag of size 20 cm. as per direction of the officer-in-charge./11.9
300
31
9315
... More
Providing and Stacking of Lemon grass of ht. 30cm with multi branches in
Poly bag of size 20 cm. as per direction of the officer-in-charge./11.1
300
51
15525
... More
Providing and Stacking of Karonda of ht. 45-60cm in Poly bag of size
25 cm. as per direction of the officer-in-charge./11.11
300
51
15525
... More
Providing and Stacking of Giloy well developed in poly bag of size 20 cm
as per direction of the officer-in-charge./11.12
300
20
6210
... More
Providing and Stacking of Brahmi well developed in poly bag of size 20 cm
as per direction of the officer-in-charge./11.13
300
20
6210
... More
Providing and Stacking of Sarpgandha well developed in poly bag of size
20 cm as per direction of theofficer-in-charge./11.14
300
51
15525
... More
Providing and Stacking of Mandukparni well developed in poly bag of size
20cm as per direction of the officer-in-charge./11.15
300
51
15525
... More
Providing and Stacking of Steviea well developed in poly bag of size 20 cm
as per direction of the officer-in-charge./11.16
300
51
15525
... More
Providing and Stacking of Aprajita Blue well developed in poly bag of size
20 cm as per direction of the officer-in-charge./11.17
300
31
9315
... More
Providing and Stacking of Aprajita White well developed in poly bag of size
20 cm as per direction of the officer-in-charge./11.18
300
31
9315
... More
Providing and Stacking of Peepli well developed in poly bag of size 20cm
as per direction of the officer-in-charge./11.19
300
31
9315
... More
Providing and Stacking of Chitrak of ht. 30cm with multi branches in Poly
bag of size 20 cm. as per direction of the officer-in-charge./11.2
300
31
9315
... More
Providing and Stacking of Dambel of ht. 30cm with multi branches in Poly
bag of size 20 cm. as per direction of the officer-in-charge./11.21
300
31
9315
... More
Providing and Stacking of Hadjod of ht. 30cm with multi branches in Poly
bag of size 20 cm. as per direction of the officer-in-charge./11.22
300
31
9315
... More
Providing and Stacking of Lajvanti well developed in poly bag of size 20cm
as per direction of the officer-in-charge./11.23
300
31
9315
... More
Providing and Stacking of Kapoor kachri well developed in poly bag of size
20cm as per direction of the officer-in-charge./11.24
300
41
12420
... More
Providing and Stacking of Bajradanti well developed in poly bag of size
20 cm as per direction of the officer-in-charge./11.25
300
41
12420
... More
Providing and Stacking of Shivnath well developed in poly bag of size
20 cm as per direction of the officer-in-charge./11.26
300
41
12420
... More
Providing and Stacking of Neer Brahmi well developed in poly bag of size
20 cm as per direction of the officer-in-charge./11.27
300
51
15525
... More
Providing and Stacking of Shankhpushpi well developed in poly bag of
size 20 cm as per direction of the officer-in-charge./11.28
300
51
15525
... More
Providing and Stacking of Nirgundi well developed in poly bag of size
20 cm as per direction of the officer-in-charge./11.29
300
31
9318
... More
Providing and Stacking of Marwa Dona of ht. 30cm with multi branches in
Poly bag of size 20 cm.as per direction of the officer-in-charge./11.3
300
31
9315
... More
Providing and Stacking of Justicia brandegeeana plant of height 45-60 cm.
multibranches, well developed in poly bags of size 20 cm as per direction
of the officer-in-charge./11.31
300
124
37260
... More
Providing and Stacking of Tulsi of ht. 30 cm with multi branches in Poly
bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
200
49
9800
... More
Providing and Stacking of Turmeric in Poly bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
100
51
5100
... More
Providing and Stacking of Cumin in Poly bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
200
82
16400
... More
Providing and Stacking of Black Pepper in Poly bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
100
18
1800
... More
Providing and Stacking of Cinnamon in Poly bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
100
185
18500
... More
Providing and Stacking of Saffron in Poly bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
100
225
22500
... More
Providing and Stacking of Chillies in Poly bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
100
35
3500
... More
Providing and Stacking of All Spices in Poly bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
50
115
5750
... More
Providing and Stacking of Ginger in Poly bag of size 20 cm. as per direction of the officer-in-charge./Quotation Rate
100
45
4500
... More
Providing and Stacking of Apple Tree as per direction of the officer-in-charge./Quotation Rate
20
650
13000
... More
Providing and Stacking of Pear Tree as per direction of the officer-in-charge./Quotation Rate
20
650
13000
... More
Providing and Stacking of Cheeku Tree as per direction of the officer-in-charge./Quotation Rate
20
430
8600
... More
Providing and Stacking of Coconut Tree as per direction of the officer-in-charge./Quotation Rate
10
2590
25900
... More
Providing and Stacking of Papaya Tree as per direction of the officer-in-charge./Quotation Rate
50
150
7500
... More
Providing and Stacking of Lemon Tree as per direction of the officer-in-charge./Quotation Rate
10
225
2250
... More
Providing and Stacking of Jack Fruit Tree as per direction of the officer-in-charge./Quotation Rate
10
225
2250
... More
Providing and Stacking of Med Berry Tree as per direction of the officer-in-charge./Quotation Rate
20
345
6900
... More
Providing and Stacking of Olive Tree as per direction of the officer-in-charge./Quotation Rate
20
225
4500
... More
Providing and Stacking of Baheda Tree as per direction of the officer-in-charge./Quotation Rate
10
650
6500
... More
Providing and Stacking of Harad Tree as per direction of the officer-in-charge./Quotation Rate
10
650
6500
... More
Providing and Stacking of Star Fruit (Amrakh) Tree as per direction of the officer-in-charge./Quotation Rate
10
525
5250
... More
Providing and Stacking of (Galgal) Hill Fruits Tree as per direction of the officer-in-charge./Quotation Rate
10
420
4200
... More
Providing and Stacking of Grape Fruit Tree as per direction of the officer-in-charge./Quotation Rate
10
590
5900
... More
Providing and Stacking of Kaitha Tree as per direction of the officer-in-charge./Quotation Rate
10
590
5900
... More
Wireframe Running Horse H7F/Sanctioned Rate
4
28080
112320
... More
Wireframe Giraffe H12F/Sanctioned Rate
3
28800
86400
... More
Wireframe Standing Kangaroo H6F/Sanctioned Rate
4
24480
97920
... More
Wireframe Butterfly H4F/Sanctioned Rate
4
28800
115200
... More
Wireframe Dancing Peacock H5F/Sanctioned Rate
2
29520
59040
... More
Wireframe Swan Bird Couple H4.6F/Sanctioned Rate
2
29520
59040
... More
Wireframe Reindeer with Long Horn H7F/Sanctioned Rate
2
25920
51840
... More
Wireframe Heart Shape Gate H8F/Sanctioned Rate
2
43200
86400
... More
Wireframe Lady with Pot Falling Water H6F/Sanctioned Rate
1
40320
40320
... More
Wireframe Bear Family 3 Pcs Srt H7, 6, 4F/Sanctioned Rate
1
97920
97920
... More
MIYAWAKI FORESTATION FOR FOREST RAMBLE /
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 2.6.1 All kinds of soil/DSR 2023 2.6
3000.03
175
525515.26
... More
Material that will be used for soil enrichment with cartage, loading, unloading and all complete of the work./
-
-
-
... More
For water Retention material (leaf compost/sugar cane stalk/other retantion material) with cartage, loading, unloading and all complete of the work./MR
200
1011
202200
... More
Perforation Material (Rice Husk) with cartage, loading, unloading and all complete of the work./MR
300
2185
655500
... More
Mulching Material (Rice Straw) with cartage, loading, unloading and all complete of the work./MR
400
576
230400
... More
Soil Microbiology Enhancer 1 (Jeevamrit) with cartage, loading, unloading and all complete of the work./MR
2
8093
16186
... More
Soil Microbiology Enhancer 2 (Ghan Jeevamrit) with cartage, loading, unloading and all complete of the work./MR
2
8093
16186
... More
GROUND TYPE FOREST/
-
-
-
... More
Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in
15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge., DSR Horticulture 2020; 6.7/DSR Horticulture 2020; 6.7
19367
20
400896.9
... More
Providing and stacking of Belamcanda chinensis of height 45-60 cm. branched in earthen pots of size 20 cm as per direction of the officer-in-charge. (Lepord lily), /MR
150
62
9300
... More
Providing and stacking of Alternanthera species of height 15 cm to 20 cm, full of branches
and foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge./DSR Horticulture 2020;6.2
250
20
5175
... More
Providing and stacking of Asparagus sprengeri of height 15 cm to 20 cm, full of leafy branches
in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge../DSR Horticulture 2020;6.4
250
20
5175
... More
Providing and stacking of of Chlorophytum-variegated, full of leafy suckers in 15 cm size of
Earthen Pot / Plastic Pot & as per direction of the officer-in-charge./6.9
250
20
5175
... More
Providing and stacking of of Cuphea chinensis of ht. 20-30 cm full of branches and healthy
foliage in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge./6.1
250
20
5175
... More
Providing and stacking of Dianella variegated, with 3 to 4 variegated leaves in 20 cm size of
Earthen Pot / Plastic Pot & as per direction of the officer-in-charge./6.11
250
31
7762.5
... More
Providing and stacking of Ipomea (Golden leaves), with fresh and healthy leaves in 15 cm
size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge./6.15
250
20
5175
... More
Providing and stacking of Iresine herbstii, of height 20-30 cm., full of branches well developed
in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge../6.17
250
20
5175
... More
Providing and stacking of Syngonium variegated, of height 20-30 cm. with 2-3 suckers healthy
foliage in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge./6.28
250
21
5435
... More
Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Earthen Pot / Plastic
Pot & as per direction of the officer-in-charge./6.31
249
15
3866.97
... More
SHRUB TYPE FOREST /
-
-
-
... More
Providing and stacking of Calliandra, emarginata of height 45-60 cm. in earthen pot of size 20
cm as per direction of the officer-in-charge./DSR Horticulture 2020;8.5
200
36
7246
... More
Providing and stacking of Excoecaria bicolor of height 45-60 cm. in earthen pots of size 20
cm as per direction of the officer-in-charge./DSR Horticulture 2020;8..21
200
41
8280
... More
Providing and stacking of Ficus panda of height 30-45 cm. with 3-4 branches and healthy
foliage in p.bag of size 20 cm as per direction of the officer-in-charge./DSR Horticulture 2020;8.25
200
36
7246
... More
Providing and stacking of Hamelia patens of height 90-105 cm. bushy in big size HDPE bags
as per direction of the officer-in-charge./DSR Horticulture 2020;8.33
200
103
20700
... More
Providing and stacking of Hibiscus variegated of height 45-60 cm. with 3-4 branches and
healthy variegated foliage in earthen pots of size 20 cm as per direction of the officer-incharge./DSR Horticulture 2020;8.38
200
46
9314
... More
Providing and stacking of Malpighia coccigera of height 30-45 cm., multibranched in earthen
pots of size 20 cm as per direction of the officer-in-charge./DSR Horticulture 2020;8.45
200
51
10350
... More
Providing and stacking of Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched
in earthen pots of size 25 cm as per direction of the officer-in-charge./DSR Horticulture 2020;8.48
200
113
22770
... More
Providing and stacking of Tecoma stans of height 90-105 cm. bushy in big size HDPE bag as
per direction of the officer-in-charge./DSR Horticulture 2020;8.72
200
124
24840
... More
Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots
of size 20 cm as per direction of the officer-in-charge./DSR Horticulture 2020;8.54
200
41
8280
... More
Providing and stacking of Plumbego capensis well developed with fresh and healthy 30 to 45
cm ht., with bloom in 20 cm Earthen Pot/Plastic Pot as per direction of the officer-in-charge./DSR Horticulture 2020;8.55
200
62
12420
... More
Providing and stacking Dendrolobiumof height 6-8 feet with bushy healthy plant in 14" bags & as per direction of the officer-in-charge. /Market Rate
200
500
100000
... More
Providing and stacking Plumeria Pudica of height 6-18feet with bushy healthy plant in 14" bags & as per direction of the officer-in-charge. /Market Rate
200
200
40000
... More
TREES /
-
-
-
... More
Providing and stacking of Mimusops elengi (Maulsri) healthy and multi branches of height 10-12 feet in big poly bags of size 18" as per direction of the officer-in-charge. /Market Rate
100
500
50000
... More
Providing and stacking of Butea frondosa (Flame of Forest) healthy and multi branches of height 4-6 feet in big poly bags of size 18" as per direction of the officer-in-charge. /Market Rate
100
300
30000
... More
Providing and stacking of Erythrina indica healthy and multi branches of height 10-12 feet in big polybag of size 18" as per direction of the officer-in-charge. /Market Rate
100
525
52500
... More
Providing and stacking of Acacia auriculiformis healthy and multi branches of ht 10-12 feet in bag size of 18" as per direction of the officer-in-charge. /Market Rate
100
300
30000
... More
Providing and stacking of Peltophorum species healthy and multi branches of height 12-14 feet in big poly bags of size 18" as per direction of the officer-in-charge. /Market Rate
100
550
55000
... More
Providing and stacking Cassia Gluca of height 8-10 feet with bushy healthy plant in 14" bags & as per direction of the officer-in-charge. /Market Rate
100
150
15000
... More
Providing and stacking of Paras Peepal healthy and multi branches of height 10-12 feet in big poly bags of size 18" as per direction of the officer-in-charge./Market Rate
100
1000
100000
... More
Providing and stacking of Bauhinia blakeana (Kachnar) of height 120-150 cm. in big poly
bags of size 25 cm as per direction of the officer-in-charge./DSR Horticulture 2020;7.7
100
82
8280
... More
Providing and stacking of Mangifera indica (Mango-grafted ) differnt variety of height 60-75 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. /MR.
100
300
30000
... More
Providing and stacking of Lagerstroemia Flaush (jarool) healthy and multi branches of ht.10-12 feet in Earthen pots of size 12" as per direction of the officer-in-charge. /Market Rate
100
350
35000
... More
Providing and stacking of Ashok Pendula healthy and multi branches of ht.10-12 feet in Earthen pots of size 12" as per direction of the officer-in-charge. /Market Rate
100
280
28000
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia/DSR 19.6.2
10.55
439
4633.67
... More
Horticulture Maintenance 24 months/
-
-
-
... More
Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Play grounds / Public parks Per Sqm (as per yard stick 1Mali =2.00Acre). DSR (Hort) 2020/2.40.5/
660000
2
1636800
... More
Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/ edge bed watering, manureing & apply insecticides & fungicides etc. (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.DSR20202.2.36
/
22168.05
23
518510.69
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 05 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment). DSR 2020 horti - 2.25 /
41
256
10502.56
... More
Supply & stacking Urea 40% Nitrogen @ 160 kg per acre (as per yard stick of CPWD LDA SOR 2018-19/11.1/
545
6
3733.25
... More
Supply & stacking DAP 50 kg per acre/year. LDA SOR 2018-19/11.2/
170
22
3842
... More
Supply & Stacking Bone Meal/ Oil Cake (LDA SOR Horti 2018-19/11.3) 50 kg per acre/Year/
170
31
5355
... More
Removal of garden waste by TATA 407 or equivalent including loading and unloading and carriage upto 1 km lead, complete disposal upto designated place as per direction of Officer in charge. DSR Horticulture 2020/2.60 /
1460
411
600731.6
... More
TOILET BLOCK ACCESSORIES FOR PLUMBING WORKS
-
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :/PWD 19.7 (DAR17.10)
2
5486
10973.4
... More
Providing and fixing the taps attached to the shower divertor and the the sink /MR.
4
2200
8800
... More
Providing and fixing the shower diverters /MR.
2
6113
12226
... More
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete./
-
-
-
... More
32 mm dia (for wash basin)/PWD 17.28.1.1
2
82
164.16
... More
WATER SUPPLY PIPES AND FITTINGS/
-
-
-
... More
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge./
-
-
-
... More
Internal work exposed on wall/PWD
-
-
-
... More
40mm nominal outer dia pipes/18.7.5
100
555
55530
... More
50mm nominal outer dia pipes/18.9.6
50
627
31371
... More
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge./
-
-
-
... More
Concealed work including cutting chase and making good the wall etc./PWD
-
-
-
... More
15mm nominal outer dia pipes/18.8.1
80
393
31459.2
... More
20mm nominal outer dia pipes/18.8.2
40
424
16987.2
... More
25mm nominal outer dia pipes/18.8.3
30
495
14865
... More
32mm nominal outer dia pipes/18.8.4
20
584
11680.2
... More
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)/PWD
-
-
-
... More
40 mm nominal bore/18.17.3
4
652
2610.32
... More
50 mm nominal bore/DSR 18.17.4( Rates factored by .8667 ( as per UP SOR Calculation Method)
4
811
3244.04
... More
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. /DSR 18.21.2.1( Rates factored by .8667 ( as per UP SOR Calculation Method)
20
77
1544.4
... More
Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931./PWD 18.49.1
4
400
1601.4
... More
Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. /PWD 18.50.1
4
648
2593.24
... More
Providing & fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. /PWD 18.52.1
4
529
2118.48
... More
Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931./PWD 18.53.1
4
453
1814.68
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern/PWD 17.4.4
2
14677
29354.58
... More
Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design/ DSR 18.32.1( RATES FACTORED WITH .8667 AS PER LUCKNOW SOR)
4
1574
6296.24
... More
Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design/
-
-
-
... More
150 x 100 mm. size P type/PWD 19.4.2.1 &19.4.2
6
2159
12959.34
... More
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms/DSR 17.70.1( RATES FACTORED WITH .8667 AS PER LUCKNOW SOR)
2
289
579.98
... More
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms./DSR 17.72( RATES FACTORED WITH .8667 AS PER LUCKNOW SOR)
2
183
366.46
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank./PWD 18.48
6000
8
52140
... More
SUPPLY OF SANITARY FIXTURES, ACCESSORIES AND BATHROOM FITTINGS/
-
-
-
... More
Providing & fixing of white vitreous china urinal partition for half stall urinals. (Jaquar or equivalent)/MR
-
-
-
... More
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. (Make : Supreme / Finolex / Prince)/
-
-
-
... More
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)/
30
440
13200
... More
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)/
30
315
9450
... More
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. (Make : Supreme / Finolex / Prince)/
-
-
-
... More
50 mm dia./
20
105
2100
... More
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince)/
-
-
-
... More
P-Trap type Floor Trap 110 x 75 mm /
10
580
5800
... More
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps./M.R.
4
124
496
... More
Providing & fixing 50 mm. dia. G.I elbow (drain point) in the toilet floor including 50 mm dia. C.P. waste jali complete as required./M.R.
8
318
2546.24
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%