Lucknow Development Authority Tender

SITC of artisticly designed laser cut-work MANDALA light art sculptures emitting the multi-coloured light effects, heavy duty glowing light art installation, a set of laser Art llation of approx size of 3 mtr height and 2 mtr wide, fitted with LED lighting with electronic driver which offers Protection against Short Circuit, Over- Voltage & Over- Current, IP 65 protection,voltage input AC240V, estimated Lifetime-L70 @ 50,000hours minimum. Alongwith the proper mounting arrangement with the foundation plate. Final design as per the reference image attached, to be approved by the concern authority.

SITC of Bird Nest Light of 100W having Housing: in die-cast aluminium, Colour temperature of the fixture 4000K. Fixture protection level IP65/IK08 rating. System wattage should be a maximum of 100W, System Lumen output should be minimum of 10000lm, Minimum efficacy- 100 lm/w, Luminous flux maintainance: (L70B50), Burning Hours : 50.000h, CRI should be 80 or Higher and should have power factor 0.95, Fixture should have reputaed LED like lumiled, cree or Nichia.Beam Option Very Narrow, Narrow, Mediam, Wide and Very Wide.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR No.501 K

25 sq. mm 3-1/2 core

Supply and fixing of 2.5 Sqmm 3 core copper unarmoured cable

Supply and fixing 40 Amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

Dismantling & Re-installation charges for relocation of existing decorative motifs around the city; inclusive of labour, transportation, servicing & other miscelleneous charges. Proper completion of work as per direction of Engineer-in-charge. [Namaste Decorative Led Light (500m from Ring road) (1 Pole x 2) X 14, (1 Pole X 2) X 46. Butterfly Decorative Led Light]

(Shaheed Path)

SITC of artisticly designed laser cut-work light motif emitting monolocolor light effects, heavy duty glowing with backlit LED mudules, system wattage of 100-150W, a set of laser Art llation of approx size of is width 3 ft. and height 5 ft. with IP 65 LED Module with electronic driver, estimated Lifetime-L70 @ 25,000hours minimum. Alongwith the proper mounting arrangement on pole Final design as per the reference image attached, to be approved by the concern authority. CHIKANKARI 1

SITC of artisticly designed laser cut-work light motif emitting monolocolor light effects, heavy duty glowing with backlit LED mudules, system wattage of 100-150W, a set of laser Art llation of approx size of is width 3 ft. and height 5 ft. with IP 65 LED Module with electronic driver, estimated Lifetime-L70 @ 25,000hours minimum. Alongwith the proper mounting arrangement on pole Final design as per the reference image attached, to be approved by the concern authority. CHIKANKARI 2

SITC of artisticly designed laser cut-work light motif emitting monolocolor light effects, heavy duty glowing with backlit LED mudules, system wattage of 100-150W, a set of laser Art llation of approx size of is width 3 ft. and height 5 ft. with IP 65 LED Module with electronic driver, estimated Lifetime-L70 @ 25,000hours minimum. Alongwith the proper mounting arrangement on pole Final design as per the reference image attached, to be approved by the concern authority. CHIKANKARI 3

SITC of artisticly designed laser cut-work light motif emitting monolocolor light effects, heavy duty glowing with backlit LED mudules, system wattage of 100-150W, a set of laser Art llation of approx size of is width 3 ft. and height 5 ft. with IP 65 LED Module with electronic driver, estimated Lifetime-L70 @ 25,000hours minimum. Alongwith the proper mounting arrangement on pole Final design as per the reference image attached, to be approved by the concern authority. CHIKANKARI 4

SITC of Column light made of GI with fine laser cut design and signage of closed by diffuser and have ingress protection for optical compartment. Fitting height 4.0m above ground level with mid light illumination of 80-100W. The column base section shall be of LXW= 300mm- 350mm (or dia as per design slelection). Mid-section gives the homogeneous light output. All pole section shall be welded using high and MIG welding process. The Service door shall be provided at bottom part of the pole which equipped with a C clamp with sliding nuts to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the pole is design with elongated foundation holes for fine alignment of the pole during installation. Coulmn is made of GI with fine laser cut design and environment. Luminaire primarily coated with UV stabilized MRF PU PAINTED. All exterior parts are made of stainless steel. Silicone rubber gasket are provided for water protection. LED Light output is more than 100lm/watt, CRI70, Surge protection 4k, operating voltage 140-270V, wired with Branded LEDs of Osram/ Cree/Lumiled and Fulham or equivalent constant voltage/current driver with efficiency85%, power factor0.9, THD=10%. Colour tolerance ,3 SCDM to avoid colour deviation. (SHRADDHANJALI LAMPS)

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR No.501 K

25 sq. mm 3-1/2 core

Supply and fixing of 2.5 Sqmm 3 core copper unarmoured cable

Supply and fixing 40 Amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

Dismantling & Re-installation charges for relocation of existing decorative motifs around the city; inclusive of labour, transportation, servicing & other miscelleneous charges. Proper completion of work as per direction of Engineer-in-charge. [Gamla/Popcorn Light - LULU Mall Gamla/Popcorn Light - Palassio Mall]

(Prayagraj Road)

SITC of artisticly designed laser cut-work light motif emitting monolocolor light effects, heavy duty glowing with backlit LED mudules, system wattage of 100-150W, a set of laser Art llation of approx size of 4ft dia, with IP 65 LED Module with electronic driver, estimated Lifetime-L70 @ 25,000hours minimum. Alongwith the proper mounting arrangement on pole Final design as per the reference image attached, to be approved by the concern authority. (Swastik)

Supply Installation ,testing & commissioning of Decorative lighting fixtures made out of Aluminium Wire frame supporting a mix of diode based LED/Neon Pixel light housed in diecast aluminium Casing conforming to protection grade , IP68 with all weather proof sealed driver box and LED strip UV resistand Grade 4 and fire proof Grade v-0 having voltage of 12v (low voltage) power rating of 7.2 watt/m capable of delivering RGB colours using SPI control method capable of working in the ambient temrature range of -20degree to + 55 degrees outdoor wire driver (Size .75MX1.20M) Both side Illumination/Glow complete in all resopect as per the satisfaction of E/Ic.( The drawing design shall be as per the approval of competant authourity) PSR (Kalash)

SITC Of 9.0 mtr high unipole structure made up of MS pipe 300 mm , thickness- 6 to 8 mm, Structure shall be painted with MRF PU Painted. Mid-section gives the homogeneous light output. All pole section shall be welded using high and MIG welding process. The Service door/ Junction box shall be provided at bottom part of the pole which equipped with a C clamp with sliding nuts to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the Structure is designed with elongated foundation holes for fine alignment of the pole during installation. Nano Ceramic surface conversion, resistant to corrosive environment. The Structure shall have the Logo of Lucknow and Tag line ( Mukuraiye aap lucknow me hain in Hindi or English ) at the top of it with mono color effect. The dimension of Logo and slogan shall be 5.0 long and 1.2 mtr high with a thickness of 300mm. This acrylic structure shall be supported by the MS structure in side to provide the adequate strength to the it. Foundatrion as for 16 mtr high mast BOQ item no 1.9A suitable for above unipole

SITC of artisticly designed laser cut-work MANDALA light art sculptures emitting the multi-coloured light effects, heavy duty glowing light art installation, a set of laser Art llation of approx size of 3 mtr height and 2 mtr wide, fitted with LED lighting with electronic driver which offers Protection against Short Circuit, Over- Voltage & Over- Current, IP 65 protection,voltage input AC240V, estimated Lifetime-L70 @ 50,000hours minimum. Alongwith the proper mounting arrangement with the foundation plate. Final design as per the reference image attached, to be approved by the concern authority.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR No.501 K

25 sq. mm 3-1/2 core

Supply and fixing of 2.5 Sqmm 3 core copper unarmoured cable

Supply and fixing 40 Amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

Dismantling & Re-installation charges for relocation of existing decorative motifs around the city; inclusive of labour, transportation, servicing & other miscelleneous charges. Proper completion of work as per direction of Engineer-in-charge. [Namaste Decorative Led Light (500m from Ring road & Lucknow Signage)]

(Ayodhya Road)

SITC of artisticly designed laser cut-work light motif emitting monolocolor light effects, heavy duty glowing with backlit LED mudules, system wattage of 100-150W, a set of laser Art llation of approx size of 4ft dia, with IP 65 LED Module with electronic driver, estimated Lifetime-L70 @ 25,000hours minimum. Alongwith the proper mounting arrangement on pole Final design as per the reference image attached, to be approved by the concern authority. (Swastik)

SITC Of 9.0 mtr high unipole structure made up of MS pipe 300 mm , thickness- 6 to 8 mm, Structure shall be painted with MRF PU Painted. Mid-section gives the homogeneous light output. All pole section shall be welded using high and MIG welding process. The Service door/ Junction box shall be provided at bottom part of the pole which equipped with a C clamp with sliding nuts to accommodate a built in connection box. The control gear tray is prewired with MCB, terminal connectors for loop in loop out arrangement. The base plate of the Structure is designed with elongated foundation holes for fine alignment of the pole during installation. Nano Ceramic surface conversion, resistant to corrosive environment. The Structure shall have the Logo of Lucknow and Tag line ( Mukuraiye aap lucknow me hain in Hindi or English ) at the top of it with mono color effect. The dimension of Logo and slogan shall be 5.0 long and 1.2 mtr high with a thickness of 300mm. This acrylic structure shall be supported by the MS structure in side to provide the adequate strength to the it. Foundatrion as for 16 mtr high mast BOQ item no 1.9A suitable for above unipole

SITC of artisticly designed laser cut-work FLORAL light art sculptures emitting the multi-coloured light effects, heavy duty glowing light art installation, a set of laser Art llation of approx size of 3 mtr height and 1.2 mtr wide, fitted with LED lighting with electronic driver which offers Protection against Short Circuit, Over- Voltage & Over- Current, IP 65 protection,voltage input AC240V, estimated Lifetime-L70 @ 50,000hours minimum. Alongwith the proper mounting arrangement with the foundation plate. Final design as per the reference image attached, to be approved by the concern authority.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR No.501 K

25 sq. mm 3-1/2 core

Supply and fixing of 2.5 Sqmm 3 core copper unarmoured cable

Supply and fixing 40 Amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

Dismantling & Re-installation charges for relocation of existing decorative motifs around the city; inclusive of labour, transportation, servicing & other miscelleneous charges. Proper completion of work as per direction of Engineer-in-charge. [Kalash Decorative Led Light; Matiyari flyover Diya Decorative Led Light; Chinhat flyover Diya Decorative Led Light; Kamta flyover Namaste Decorative Led Light (500m from Lucknow Signage)] (1 Pole X 2) x 33, (1 Pole X 2) X 34, (1 Pole X 2) x 40, (1 Pole x 2) X 15.

PART-(B)

Operation and Maintenance one year 2.5 % on above

Operation and Maintenance after one years to next one years 5% on above

Operation and Maintenance after two years to next one year 7.5 % on above.