Lucknow Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Lucknow Development Authority - LDA Tender
Housekeeping Services
Eprocure
Opening Date1 Dec 2023
Closing Date19 Dec 2023
Tender AmountRefer Documents
Costs
EMD
₹ 17,92,000Document Cost
₹ 4,366Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_LDAUP_866410_1Bid Award Id
ViewTender No
79/E-Tender/CE/2023-24(01)Tender Authority
Lucknow Development Authority ViewPurchaser Address
-Website
http://http://www.ldalucknow.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
SITC of FOAM JETS WITH CALYX AERATING SPRAY for
existing 2 nos. waterbodies of size 7.39m X 9.048m & 6.42m x 6.61m:
-
-
-
... More
Spray comprises of a Calyx Aerating in center flanked with Foam Jets on 4 corners of waterbody. Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized. High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure. Make of spray: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
2
-
-
... More
SITC of Waterfall/Cascading situated at waterbodies of size
7.39m X 9.048m & 6.42m x 6.61m:
-
-
-
... More
Waterfall/Cascading from lips approx. 1.5m wide at top level to lowest level. Manifold/Pipework/deflector are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized. High quality rubber gaskets, nuts & bolts along with gunmetal/C.I. control valve to adjust flow pressure. Make of waterfall: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
SITC of INSIDE DROP RINGS WITH CALYX AERATING SPRAY
for existing waterbody of size 15.72m X 6.45m:
-
-
-
... More
Spray comprises of a Calyx Aerating in center flanked with an Inside Drop Ring on either side. Each Inside Drop Ring comprises of a 3m dia ring with 36 nos. heavy jet nozzles forming a white foaming dome. Nozzles on ball joints to adjust 10 degree off vertical. Nozzles are made of Brass- Chrome plated. Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized . High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure. Approx. height of water effects: 3m. Make of spray:Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
SITC of STRAIGHT/VERTICAL JETS and Inside Drop Spray
for existing waterbody of size 70.44 X 6.57m:
-
-
-
... More
Spray comprises of Straight/Vertical Jets in a line at center line of the pool length of 70.44m, spacing between jets- 1m and Inside Drop, along both side walls inside of 70.44m pool length, comprising of total 20 segments, each segment of 4m length on which nozzles shall be fitted, spacing between segments-3m. Straight/Vertical Jets in a line: ¾” dia Brass BJRC for directional adjustments of jet, ¾” dia gunmetal ISI mark wheel valve and necessary Galvanised steel fittings. 4” dia Galvanised Steel manifold- Jindal Make “B” Class ISI Mark, 3” dia Galvanised Steel pipe work (69 mtrs. Length) – Jindal make “B” Class ISI Mark with accessories like flanges, ¾” dia sockets, pipe stands etc. made of steel- galvanized/epoxy coated. Each Inside drop segment comprises of 2” dia Galvanised Steel pipework- Jindal Make “B” Class ISI Mark with accessories like flanges, sockets, pipe stands/clamps etc. made of steel- galvanized/epoxy coated and one no. 2” dia gunmetal ISI mark wheel valve. Make of spray: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
SITC of Multiple Christmas Tree Shape Spray for existing waterbody of size 20.73m X 41.02m (D- Shape portion) :
-
-
-
... More
Spray comprises of a heavy Christmas Tree Shape Jet in center surrounded by regular Christmas Tree Shape Jets on 10m dia and 15m dia . All jets white aerated- Water level dependent (Required water depth to be maintained at all times). Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized . High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure. Make of spray: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
SITC of Foam Jets with Peacock Feathers and INSIDE DROP RINGS Sprays for existing circular waterchannel of 4m width
around the Globe:
-
-
-
... More
Spray comprises of Inside Drop Rings Sprays and 5 nos. segments, each of 10m length with a Peacock Feathers Spray in center flanked on either side by Foam Jets Sprays. Each Inside Drop Ring Spray comprises of a 3m dia ring. Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized . High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure. Make of spray: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
Nozzles
-
-
-
... More
Nozzles Made of Brass Chrome plated Make-: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
216
-
-
... More
Foam jet nozzle, on ball joint, of 1.25” orifice size. Nozzle made of Brass- Chrome plated. Approx. height of water effects: 1.2m. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
8
-
-
... More
In Calyx Aerating Spray, water is sprayed in an inverted cone pattern with a small center jet. Calyx nozzle made of aluminium alloy – epoxy coated/Stainless Steel, center jet nozzle made of brass – chrome plated. Approx. height of water effects: Calyx – 1.25m height X 4.5m dia, Center Jet – 3m height. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
2
-
-
... More
Heavy jet nozzle forming a white foaming dome. Nozzle on ball joint to adjust 10 degree off vertical. Nozzle made of Brass- Chrome plated. Approx. height of water effect: 3m. Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.( LMR)
72
-
-
... More
In Calyx Aerating Spray, water is sprayed in an inverted cone pattern with a small center jet. Calyx nozzle made of aluminium alloy – epoxy coated/Stainless Steel, center jet nozzle made of brass – chrome plated. Approx. height of water effects: Calyx – 1.25m height X 4.5m dia, Center Jet – 3m height. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
Straight/Vertical Jet of 12mm orifice size brass- chrome plated plain bore nozzle. Approx. height of water effects: 3m. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
70
-
-
... More
Inside Drop's 4mm orifice size brass- chrome plated ball joint nozzle. Approx. height of water effects: 2m. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers..( LMR)
500
-
-
... More
Heavy Christmas Tree Shape Jet nozzle made of Brass- Chrome plated. Approx. height of water effects: 4m. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
Regular Christmas Tree Shape Jet nozzle made of Brass- Chrome plated. Approx. height of water effects: 4 Jets on 10m dia – 2.5m & 8 Jets on 15m dia- 2m. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
12
-
-
... More
Heavy jet nozzle forming a white foaming dome. Nozzle on ball joint to adjust 10 degree off vertical. Nozzle made of Brass- Chrome plated. Approx. height of water effect: 3m. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
180
-
-
... More
Foam jet nozzle, on ball joint, of 1.25” orifice size. Nozzle made of
Brass- Chrome plated. Approx. height of water effects: 1.2m. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
20
-
-
... More
Peacock Feathers Spray's adjustable nozzle. Nozzle made of Brass- Chrome plated. Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
45
-
-
... More
Fountain Electrical Outdoor Panel
-
-
-
... More
Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain's pumpset and RGB Sequencing lights comprises of:
1. Contactor 25 Amp- 03 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. Star Delta Timer - 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 01 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 40 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 12- 30 Amp- 01 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 03 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -01 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 02 Nos. 9. Overload Indicator - 01 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 01 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 01 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 01 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 01 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 01 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 20, size of panel - 4ft X 3ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.( LMR)
2
-
-
... More
Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain, pumpset andRGB Sequencing lighting comprises of :
1. Contactor 25 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. DOL Starter - 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 01 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 20 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 6-12 Amp- 01 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 03 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -01 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 02 Nos. 9. Overload Indicator - 01 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 01 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 01 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 01 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 01 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 01 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 10, size of panel - 3ft X 2ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.( LMR)
2
-
-
... More
Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain, pumpset andRGB Sequencing lighting comprises of:
1. Contactor 25 Amp- 03 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. Star Delta Timer - 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 01 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 30 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 12- 30 Amp- 01 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 03 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -01 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 02 Nos. 9. Overload Indicator - 01 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 01 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 01 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 01 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 01 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 01 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 15, size of panel - 4ft X 3ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.
1
-
-
... More
Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain, pumpset andRGB Sequencing lighting comprises of: 1. Contactor 25 Amp- 03 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. DOL Starter - 03 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 03 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 60 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 6-12 Amp- 03 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 09 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -03 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 02 Nos. 9. Overload Indicator - 03 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 03 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 03 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 03 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 03 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 03 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring
17. Bus Bar 40 Amp steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 10, size of panel - 4ft X 4ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain's pumpset and RGB Sequencing lights comprises of:
1. Contactor 25 Amp- 12 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. Star Delta Timer - 04 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 04 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 40 Amp- 04 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 12- 30 Amp- 04 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 12 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -04 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 08 Nos. 9. Overload Indicator - 04 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 04 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 04 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 04 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 04 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 04 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring
17. Bus Bar 100 Amp
steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 80, size of panel - 6ft X 5ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.( LMR)
1
-
-
... More
Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain, pumpset andRGB Sequencing lighting comprises of :
1. Contactor 25 Amp- 05 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. DOL Starter - 05 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 05 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 20 Amp- 05 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 6-12 Amp- 05 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 15 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -05 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 10 Nos. 9. Overload Indicator - 05 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 05 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 05 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 05 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 05 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 05 Nos. (Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring
17. Bus Bar 65 Amp
steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 50, size of panel - 5ft X 4 ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.( LMR)
4
-
-
... More
Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain's pumpset and RGB Sequencing lights comprises of:
1. Contactor 25 Amp- 06 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. Star Delta Timer - 02 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 02 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 40 Amp- 02 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 12- 30 Amp- 02 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 06 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -02 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 04 Nos. 9. Overload Indicator - 02 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 02 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 02 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 02 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 02 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 02 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring
17. Bus Bar 50 Amp steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 40, size of panel - 4ft X 4ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.
1
-
-
... More
Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain, pumpset andRGB Sequencing lighting comprises of :
1. Contactor 25 Amp- 05 Nos (Make: L&T/ Schneider/ Siemens/ GE)
2. DOL Starter - 05 Nos (Make: L&T/ Schneider/ Siemens/ GE)
3. Single Phase Preventer- 05 Nos (Make: Bentex/ Selec/ GIC or equivalent)
4. Incomer Main Switch 20 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)
5. Overload Relay 6-12 Amp- 05 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)
6. Fuse for motor 32 Amp- 15 Nos (Make: GE/ L&T or equivalent)
7. MCB for Lights 6 Amp -05 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)
8. Push Button On/ Off switches (Red/ Green)- 10 Nos. 9. Overload Indicator - 05 Nos (Make: Eaton/ Siemen or equivalent)
10. Single Phase Indicator- 05 Nos (Make: Eaton/ Siemen or equivalent)
11. 3 Phase indicator RGB- 05 Nos (Make: Eaton/ Siemen or equivalent)
12. Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)
13. Ampere Meter- 05 Nos (Make: Motwane, Innova, Fluke or equivalent)
14. SMPS/ Transformer for lights- 05 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)
15. RGB Lights' controller- 05 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)
16. Internal Wiring
17. Bus Bar 65 Amp
steel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 50, size of panel - 5ft X 4ft X 1ft depth. Make of electric panel: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers.( LMR)
2
-
-
... More
SITC of Monoblock type submersible pump set of Following Capacity (Three phase, 50Hz, 415-380V AC) proper completion of work as per direction of E/Ic. Kirloskar/Crompton Greaves/KSB/Texmo. Suction filter for pump: Filter body & filter mesh made from AISI 304 standard stainless steel.
-
-
-
... More
10 HP
8
-
-
... More
7.5 HP
1
-
-
... More
5.0 HP
14
-
-
... More
3 HP PSR
21
-
-
... More
Supply, Installation, Testing and Commissioning of Luminaries comprise of 12V LED lights (RGB). Complete light body made of Stainless steel 304 grade, total 27watt power leds. Toughened glass with seal. Stainless steel 304 grade cable gland. All external nuts and bolts are of Stainless steel 304 grade. Adjustable mounting bracket is made of Stainless steel 304 grade. IP 68 compliant. All 'in pool' connections shall be fully waterproof. Make of Luminaries Make: Wet Design/Fontana/ALT/A.M. Irrigation System/Bharat engineers.( LMR)
300
-
-
... More
1.1 kV grade double insulated copper flexible cable 2.5 sq.mm x 3 core for pumps, Make: Finolex/Havells/Polycab/Rellison PSR (J.M.P)
2500
-
-
... More
1.1 kV grade double insulated copper flexible cable 1.5 sq.mm x 4 core for lights, Make: Finolex/Havells/Polycab/Rellison PSR ,(J.M.P)
2500
-
-
... More
Play Area
-
-
-
... More
Children Play Area
-
-
-
... More
PROVIDING AND FIXING OF 5’ HT ROTO WAVE SLIDE HAVING DIMENSIONS
PRODUCT AREA: 15’ X 3’
SAFE PLAY AREA: 21’ X 6'
THE MODULE IS MADE UP OF LLDPE PLASTIC.
THE INSIDE DIMENSION OF THE SLIDE WILL BE 425 MM.
THE LENGTH OF THE SLIDE WILL BE 2700 MM. THIS IS A DOUBLE WALL SLIDE, HAVING 5-6 MM THICKNESS ON EACH WALL.
SLIDE MODULES HAS INTERNAL STIFFENERS FOR STRENGTH & RIGIDNESS.
LADDER MAIN FRAME IS MADE UP OF 25 NB BCLASS ISI MAKE G.I PIPE & HAND RAIL OF 20 NB BCLASS
ISI MAKE G.I. PIPE.
THE PLATFORM IS MADE UP OF 14 SWG G.I. SHEETS WITH ANTI-SKID FOR FIRM FOOT GRIP. THE TRIANGULAR STEPS ARE OF 16 SWG G.I. SHEETS.
PLATFORM SUPPORT IS MADE UP OF 80 NB GI
PIPE COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER- IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF 5’ HT ROTO SPIRAL SLIDE- HAVING DIMENSIONS
PRODUCT AREA: 12 FT X 6 FT SAFE PLAY AREA: 18 FT X 10 FT
THE MODULE IS MADE UP OF LLDPE PLASTIC.
THE INSIDE DIMENSION OF THE SLIDE WILL BE 650 MM.
OVERALL SLIDE DIAMETER WILL BE 1600 MM. DEPTH OF SLIDE WILL BE 325 MM.
THIS IS A DOUBLE WALL SLIDE, HAVING 5-6 MM THICKNESS ON EACH WALL.
SLIDE MODULES HAS INTERNAL STIFFENERS FOR STRENGTH & RIGIDNESS.
SLIDE CENTRE SUPPORT IS MADE UP OF 100 NB GI PIPE.
ADDITIONAL MID LANDING SUPPORT OF 100 NB IS GIVEN FOR STABILITY OF SLIDE.
LADDER MAIN FRAME IS MADE UP OF 25 NB BCLASS ISI MAKE G.I PIPE & HAND RAIL OF 20 NB BCLASS
ISI MAKE G.I. PIPE.
THE PLATFORM IS MADE UP OF 14 SWG G.I. SHEETS WITH ANTI-SKID FOR FIRM FOOT GRIP.
THE TRIANGULAR STEPS ARE OF 16 SWG G.I. SHEETS. PLATFORM SUPPORT IS MADE UP OF 80 NB GI PIPE COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF DOUBLE ARC SWING-HAVING DIMENSIONS
PRODUCT AREA: 9.3’ X 3.5’
SAFE PLAY AREA: 13’ X 13’
TOP BAR IS MADE UP OF 50 NB G.I B-CLASS PIPE HAVING 2 SETS OF BEARING ASSEMBLY & PROFILE PLATE AT END.
THE LENGTH OF TOP BAR IS 2.8M LONG.
SIDE FRAME IS MADE UP OF 80 NB G.I B-CLASS PIPE HAVING 2 NOS. SIDE FRAME IS BEND ONE PIECE IN U-SHAPE.
SPECIAL DESIGN PIPE CLAMPS HOLD CASTING ASSEMBLY OF BEARINGS. IT GIVES NOISELESS AND SMOOTH MOVEMENT TO THE SWING. ROUND COBALT COATED SHORT LINK CHAIN OF 8MM DIAMETER (ELECTRIC BUTT WELDED) AS PER ISI: 2429, WHICH CAN CARRY A WEIGHT OF 400 KG. THE CHAIN IS RUBBERISED COATED .S.S S-HOOK IS USED TO HANG CHAIN IN RUBBER BELT.
SEAT IS MADE UP OF RUBBER WITH NON-SKID SURFACE WITH NYLON LINING IN SANDWICH PATTERN.
BELT SEAT SHOULD BE 13MM THICK. S.S. TRIANGULAR HOOK IS MOULDED IN BELT IN SUCH A WAY THAT IT WON’T PROJECT FROM THE TOP SURFACE OF THE BELT SEATS.
ROTO MOULDED LLDPE PLASTIC SPARROW
CHARACTER IS FIXED ON TOP BAR COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF MULTI SEATER SEE SAW-HAVING
DIMENSIONS
PRODUCT AREA: 8.5’ X 1.2
SAFE PLAY AREA: 15’ X 5’
SEE SAW LEVER IS MADE UP OF 80 NB GI B-CLASS PIPES.
HANDLE IS MADE UP OF 20 NB GI B-CLASS PIPES. LEVER LENGTH WILL BE 2550 MM LONG.
LEVER ENDS ARE COVERED WITH GI PIPE END CAP. FOUR NO OF SEAT IS MADE UP OF LLDPE PLASTIC. STAND IS MADE UP OF 80 NB GI B-CLASS PIPES. TWO NO OF PEDESTAL BEARING ARE GIVEN FOR SMOOTH AND NOISELESS MOVEMENT OF SEE SAW
LEVER. BEARING IS COVERED WITH NYLON COVER COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF DEN CLIMBER- HAVING DIMENSIONS
PRODUCT AREA: 8.5 FT X 8.5 FT SAFE PLAY AREA: 15 FT X 15 FT
DEN CLIMBER CONSISTS OF 5 DIFFERENT FORMS OF SHAPES LIKE CIRCLE, HEX, BRICK & ANGULAR FORM. MAIN FRAME IS MADE UP OF 25 NB G.I PIPES.INTERMIDATE PIPE IS MADE UP OF 20 NB PIPE. ALL WELDED JOINTS ARE PROPERLY GROUNDED AND COATED WITH AN EPOXY SEALANT FOR RUST RESISTANCE ALL SHARP EDGES AND CORNERS ARE PROPERLY GROUND BEFORE PAINTING.
POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS.
IT HAS VERTICAL LOOP LADDER IN CENTER.HEIGHT
OF CLIMBING WALL IS 7 FEET COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF MERRY GO ROUND PLATFORM- HAVING DIMENSIONS
PRODUCT AREA: 5’ DIAMETER. SAFE PLAY AREA: 10 ‘DIAMETER
THE PLATFORM OF MERRY GO ROUND CONSISTS OF NON-SKID TYPE ALUMINIUM CHEQUERED PLATE OF 14 SWG. THE RING ON WHICH THE CHEQUERED PLATE IS BASED IS MADE OUT OF 25 NB GI PIPES. THE SUPPORT BELOW THE CHEQUERED PLATE IS OF 40 X 40 X 5 AND 25 X 25 X 5 GI ANGLE.
THE WHOLE STRUCTURE IS MOUNTED ON HEAVYDUTY BEARING SHAFT PERMANENTLY LUBRICATED
WITH WATER SEALANT.
THE STAND OF MERRY GO ROUND PLATFORM IS MADE OUT OF 80 NB GI PIPES.
RAILING IS MADE UP OF 20 NB GI B-CLASS PIPE COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF 2 SEATER SPRING RIDER DINOSAUR- HAVING DIMENSIONS
PRODUCT AREA: 5’ X1.3’ SAFE PLAY AREA: 8’’ X 4.3'
SPRING ASSEMBLY IS MADE UP OF SQUARE PLATES & COMPRESSION SPRING.
TWO NO’S COMPRESSION SPRING IS MADE UP OF 22 DIA WIRE, SPRING DIA IS 150 MM AND HEIGHT IS 1 FT. STAND IS MADE UP OF 40 NB G.I. PIPE. PLATE IS WELDED ON IT TO FIX PLASTIC DINOSAUR ON IT FIRMLY CHARACTER – PLASTIC DINOSAUR IS MADE UP OF LLDPE PLASTIC WITH ROTATIONAL MOLDING PROCESS. LENGTH OF DINOSAUR IS 1700 MM LONG. IT HAS INBUILT HANDLE AND FOOT REST
TWO CHILDREN CAN SET ON RIDER AT A TIME COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF LOOP CLIMBER- HAVING DIMENSIONS
PRODUCT AREA: 5’ X1.3’ SAFE PLAY AREA: 8’’ X 4.3'
LOOP RUNG TOP FRAME IS MADE UP OF 80 NB GI BCLASS PIPE
LOOPS ARE MADE UP OF 20 NB GI B-CLASS PIPE.
LOOP RUNG SIDE FRAME IS MADE UP OF 80 NB GI BCLASS PIPE IN CURVE SHAPE FORMING ARC. STEP PIPES
ARE MADE UP OF 20 NB GI B-CLASS PIPE COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF ARCADE- 5’ HT- HAVING DIMENSIONS
PRODUCT AREA: 10 FT X 3.8 FT SAFE PLAY AREA: 16 FT X 9.8 FT
FRAME IS MADE UP OF 100 NB GI B-CLASS PIPE. HEIGHT OF THE FRAME WILL BE 1.5 MTR.
NET IS MADE UP OF 16 MM SIX STRANDED TERYLENE ROPE.
EACH STRAND IS CONSIST OF 1.5 MM STEEL CORE WIRE IN TERYLENE FIBRE.
FIBRE CORE OF SISAL & HEMP IS GIVEN IN THE ROPE FOR ADEQUATE FLEXIBILITY.
EACH ROPE END IS SECURED WITH SLEEVE.
SPECIALLY DESIGNED GI CLAMPS ARE WELDED ON PIPE FRAME TO HOLD ROPE CLAMPS.
SPECIALLY DESIGNED NYLON CLAMPS AND NYLON SPACERS ARE USED FOR FIXING ROPE WITH THE MAIN FRAME.
SPECIALLY DESIGNED NYLON BALL CLAMPS ARE USED FOR FORMING ROPE MESH.
SPECIALLY DESIGNED 100 NB BALL CLAMPS ARE USED
FOR COVERING FRAME JOINT SECTION COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
PROVIDING AND FIXING OF STANDING SEE SAW - HAVING
DIMENSIONS
PRODUCT AREA: 7’ X 1.3’
SAFE PLAY AREA: 11’ X 5.3'
LEVER IS MADE UP OF 50 NB GI PIPE & 32 NB GI PIPES. STAND IS MADE UP OF 80 NB GI PIPE.
TWO NO’S OF PEDESTAL BEARING ARE GIVEN FOR SMOOTH AND NOISELESS MOVEMENT OF SEE SAW LEVER.
BEARING ARE COVERED WITH NYLON COVER.
TWO NO’S OF RUBBER BUSH STOPPER ARE PROVIDED FOR CONTROLLED MOVEMENT OF LEVER AND AVOIDING BANGING OF LEVER ON GROUND.
DOUBLE FOOT REST MADE UP OF LLDPE PLASTIC IS PROVIDED FOR SAFE AND COMFORTABLE STANDING AT
BOTH END COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.
1
-
-
... More
Providing and Fixing of Custom, Design, Supply & Installation/Surfacing of EPDM 6MM & 24 MM rubber crumbs at site (30 MM) complete in all respect as directed by Engineer-in-
charge.
2000
-
-
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by Enginner in charge 2.1.1. All kind of soil. 0 to 0.30 m.
(PWD SOR 2020-21/ DAR No. - 2.1.1)
5.48
-
-
... More
Providing and laying Cement concrete 1:4:8( 1 cement : 4 Coarse sand : 8 graded stone aggregate 40 mm. nominal size) including supply of all materials. labour and T&P etc. required for proper completion of the work and curing complete, also including cost of form work in foundation and floors.
(PWD SOR 2020/DAR 4.1.8)
19.37
-
-
... More
Class-150 brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work
(PWD SOR 2020-21 DAR No. 6.1.1.)
2.1
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:2:4 (1 Cement :2 Coarse Sand (zone- III): 4 graded stone aggregate 20mm (nominal size).
(PWD SOR 2020/DAR No. 4.1.3)
27
-
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, joined with cement mortar 1:3 (1 Cement :3 Coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (lenght of finished kerb edging shall be measured for payment). (Percast C.C. kerb stone shall be approved by Engineer-in- charge.)
DSR 2018/16.69 Analysis Rate.
4.5
-
-
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required sahade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (apex Ultima, weather coat All guard) Asian, beger.
PWD SOR 2020-21/13.47.1
18
-
-
... More
Audio, Lighting and Electrical Work
-
-
-
... More
Lighting
-
-
-
... More
Supply/Installation of 11/0.433 KV, 50 Hz, 3 Phase 400 KVA Copper wound Oil immersed outdoor type level 2 distribution transformer with + 5 % to 10 % in steps of 2.5 % by off circuit tap changer. Proper completion of work as per direction of E/I. As per UPPCL Norms
1
-
-
... More
Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc.
The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. PWD SOR 801/2018
-
-
-
... More
Incoming 400 Amp. TPN-1No
Outgoing
200 Amp. TPN-2 Nos. & 63 Amp. TPN-1 Nos. Cat. B. Cubicle Type 804(b) (ii)
1
-
-
... More
SITC of 400 KVA 340-480/440V 3 Phase Balanced Type Rolling Contact Servo Voltage Stabilizer Oil Coold. Proper completion of
work as per direction of E/L
1
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 501/2018
-
-
-
... More
10 sq. mm 4 core 501 (h)
250
-
-
... More
50 sq. mm 3-1/2 core 501 (i)
100
-
-
... More
70 sq. mm 3-1/2 core 501 (m)
50
-
-
... More
150 sq. mm 3-1/2 core 501 (p)
50
-
-
... More
240 sq. mm 3-1/2 core 501 (r)
50
-
-
... More
400 sq. mm 3-1/2 core 501 (t)
50
-
-
... More
Supply and fixing of plain or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. PWD SOR 504/2018
-
-
-
... More
10 sq. mm 504 (c)
25
-
-
... More
50 sq. mm 504 (g)
8
-
-
... More
70 sq. mm 504 (h)
8
-
-
... More
150 sq. mm 504 (k)
8
-
-
... More
240 sq. mm 504 (m)
8
-
-
... More
400 sq. mm 504 (o)
8
-
-
... More
Supply and laying of 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. PWD SOR 506 a/2018
-
-
-
... More
120 sq. mm 3 core (506 a (f))
200
-
-
... More
Supplying and making 120 Sqmm Cable outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of three core ,XLPE aluminum conductor cable of 11 KV Grade as required all complite as per direction E/Ic (PSR vasant kunj PMAY)
4
-
-
... More
Façade Lighting
-
-
-
... More
Supply, Installation, Testing and Commissioning of RGBW, 60W 220V AC, Spot Light with mounting bracket, pivots in two axis, with LED operating life 50000 burning hours, Input Voltage range of 160V-260V, LED chip make Cree, Citizen, Osram, Nichia. Working temperature -10deg - 60 deg C, Beam Angle- 8 to 16 degree, Power factor.09, Humidity range 10% to 90% RH, Good Thermal management System with inbuilt drivers. Corrosion resistant aluminum cast housing, safety clear glass pane including BIS certified with R number and Ingress Protection IP66. (LBT/ALT/Tisva/DTS/Martin)
80
-
-
... More
Supply, Installation, Testing and Commissioning of RGBW, 70- 100W 220V AC, Flood Light with mounting bracket, pivots in two axis, with LED operating life 50000 burning hours, Input Voltage range of 160V-260V, LED chip make Cree, Citizen, Osram, Nichia. Working temperature -10deg - 60 deg C, Beam Angle- 8 to 24 degree, Power factor.09, Humidity range 10% to 90% RH, Good Thermal management System with inbuilt drivers. Corrosion resistant aluminum cast housing, safety clear glass pane including BIS certified with R number and Ingress Protection IP66. (LBT/ALT/Tisva/DTS/Martin)
14
-
-
... More
SITC of light console/lights control software which is suitable for all but the most demanding productions. The software shall featuring physical playbacks, assignable x-keys and a dedicated master playback section. Operating voltage/supply voltage: 100-240V, 50/60Hz; Power: max. 300VA; Operating Temperature: 0 °C up to 40 °C / 32 °F up to 104 °F;
1
-
-
... More
Supply, installation, testing and Commissioning of rack mounted DMX 512 Splitter with Input voltage range:190-280V; Input signal interface: XLR male and female sockets parallel; Output signal interface; XLR female socket parallel; Input Power range: 90V-240 VAC; Frequency range: 50HZ to 60HZ etc. (LBT/ALT/Tisva/DTS/Martin)
1
-
-
... More
Supplying, installation Testing and Commissioning of Universal high speed 2 port Art Net to USITT DMX 512-A converter having IP 20 rAting and max power consumption of 10watt complete with Power lead to connect to 220Volt supply with proper connections etc. complete as required. (LBT/Tisva/DTS/Martin)
1
-
-
... More
Supply, Installation, Testing and Commissioning of 10 W LED Bollard Light with mounting base accessories having LED operating life 50000 burning hours, Input Voltage range of 160V-260V, LED chip make Cree, Citizen, Osram, Nichia. Working temperature -10deg - 60 deg C, colour temprature should be 3000K/4000K/6000K, Good Thermal management System with inbuilt drivers. Corrosion resistant aluminum cast housing and Ingress Protection IP66. Size of the shall be Square 150mm x 150mm x 600mm Height (LBT/ALT/Tisva/DTS/Martin)
230
-
-
... More
Main Panel and distribution box: Distribution equipment like electrical distribution board, field junction boxes and luminaries’
/ speaker junction boxes etc. – shall be designed as per the final project concept approved for the show for the control as well as the distribution of power/controls to various equipment in the field/control room. These shall be indoor/ outdoor type (IP 55), as applicable, and shall be painted in accordance with other equipment within the same area of mounting or painted to suit the ambience. The components inside these distribution equipments shall be of reputed make and the quantities shall be such that there is at least 10% redundancy on the main equipment. Outgoing terminals of the main distribution board shall be of heavy duty while the incoming / outgoing terminals of all other distribution equipment shall be screw less terminals of high standard. Field junction / Distribution Boxes/ Luminaries/ Speaker Junction shall be IP 55 made out of 2 mm thick MS sheet powder coated with screw less clip-+-on terminals / or else specified and double compression glands complete as required or as specified. Cubical panel shall be fabricated out from Cold rolled close annealed (CRCA) sheet with required bracings and supports, gasket with foam rubber to make the panel dust and vermin proof, together with degreasing and applying two coats of red oxide and two coats and stove enamel paint. The main panel size shold be 2000mmX400mmX3000mm and thickness of steel sheets shall be 16 SWG. (Customised) the specification are as under : 300Amp copper bus bars, and including the following: RYB Phase Indicator, Amp and Volt meter complete in all respect with following accessories etc as required
Main Incoming : 200Amp. 35kA, TPN MCCB - 1No.
Main Outgoing : 100Amp 16kA, 4P MCCB- 4 Nos.
din bar for mounting MCBs (with MCBs and incomer as given below) as required.
Outgoing : 32Amp. (or 63A) DP 30mA ELCB/RCCB - 8 Nos. 5Amp. to 32Amp. rating, 240/415 V, 10kA, "C" curve, - 40 Nos
1
-
-
... More
Supplying and drawing of 3x2.5 FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit with proper connections etc complete as as per the attached approved make list and with proper connections etc complete as required. Power cable: Polycab/Kei/Havells/Rellison) (PSR-Imambara)
3000
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit or in trench in case of ground as per the attached approved make list and with proper connections etc complete as required. (BEC/NIC/Havells/AKG)
4200
-
-
... More
Supplying and drawing of 3x10 FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit with proper connections etc complete as as per the attached approved make list and with proper connections etc complete as required. Power cable: Polycab/Kei/Havells/Rellison) (PSR-JMP)
200
-
-
... More
Supplying and drawing of 3x16 FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit with proper connections etc complete as as per the attached approved make list and with proper connections etc complete as required. Power cable: Polycab/Kei/Havells/Rellison) (LMR)
400
-
-
... More
Supplying and drawing of DMX cable, PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit with proper connections etc complete as as per the attached approved make list and with proper connections etc complete as required. Power cable: DMX: Belden/Relison/ Falcon or equivalent (LMR)
3000
-
-
... More
Earthing for lighting and audio rack, Main Panels, Distribution box, motors etc. (Audio Cable: Krystal/D-Link/Belden/Relison or equivalent; DMX: Belden/Relison/ Falcon or equivalent; Power cable: Polycab/Kei/Havells/Rellison)
1
-
-
... More
Park Speaker System -for Ambient Sound
-
-
-
... More
Supply installation testing and commisioning of weatherised Two-Way 5.25 inch (135mm) Coaxial Speaker with Components:
• 5¼” highly weather-resistant driver
• ¾” soft-dome highly weather-resistant tweeter and can handle 80W Pink Noise Power Handling (160W program) in direct 8Ώ setting, plus built-in 30W 70V/100V multi-tap transformer, should have Fully isolated center chamber for wiring protection, Frequency Response (-10 dB): 55 Hz - 18 kHz; (±3 dB): 65Hz - 16 kHz; Power Rating1: 160 W continuous Program (2 hrs), 80 W (320W peak), Continuous Pink Noise (2 hrs), 45 W (180W peak) Continuous Pink Noise (100 hrs), Maximum Input Voltage: 23.3 V, Sensitivity2: 86 dB, 1W @ 1m (ave. 80Hz - 16kHz), Nominal Coverage Angle: 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground), Directivity Index (DI): 3.4 dB, Maximum SPL 3: 105 dB @ 1m, Low Frequency Driver: 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround, High Frequency: 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome. Complete in all respects and as directed by engineer in charge. (JBL/Bose/TW Audio/L Aucostic)
45
-
-
... More
Supply, installation, testing and commissioning of Amplifiers for Main Speakers with Four-channel 2400 Watt Network amplifier with DSP with Class D / TD technology, Power Handling : 4 × 2400W @ 4/8 Ohms, 4 × 950 W @ 16 ohms Max power per channel in case of bridge mode / Power managmenet should be 4200watts @ 4 ohms and 4800 watts @ 8 ohms, Input Signal to Noise Ratio 108 dB, Load Impedance Stereo/Dual Mode 2Ω - 16Ω; 70Vrms and 100Vrms 96KHz Sample Rate; DSP Features: classic/linear-phase/FIR speaker processing platform with four throughputs; DSP Features: Group control with Raised Cosine MESA EQ asymmetric filters Peak and RMS limiters, Support Multiple make Speaker presets Comprehensive clocking management system with low latency sample rate conversion; Protection Features: Very High Frequency Protection , Direct Current Protection , Short Circuit Protection, Temperature protection etc, Eight dual-redundant Dante network audio inputs, 4 Analog Inputs, Control port Certifictaion: CE ,ETL (ANSI/UL, CSA) , BIS. (Crown/Bose/TW Audio/L Aucostic)
1
-
-
... More
Supplying, installation Testing and Commissioning of 2C x 4 sq mm Copper Speaker Cable in PVC Conduit of specified make, complete with all accessories etc complete as as per the attached approved make list and with proper connections etc complete as required. (Audio Cable: Krystal/D-Link/Belden/Rellison
2300
-
-
... More
Supplying, installation Testing and Commissioningof 2 x 2.5 sq mm Copper Speaker Cable in PVCConduit of specified make, complete as per the attached approved make list and with proper connections etc complete as required. (Audio Cable: Krystal/D-Link/Belden/Rellison
800
-
-
... More
Supply, Installation, testing and commissioning of Speaker cage
made of SS Jali for theft protection.
100
-
-
... More
Supply, Installation, testing and commissioning of PoE Ethernet Controller with minimum 8 programmable button and Volume Control, dual-gang US Decora or dual-gang EU form factor, push/rotary encoder, encoder ring, with sleep functionality, support minimum 2 LCD screen having 64x128 pixels screen resolution, Configured within Audio Architect via drag-and-drop, power consumption 300mA max at 48VDC with VW-1 Rated. (JBL/Bose/TW Audio/L Aucostic)
1
-
-
... More
All Civil Works
-
-
-
... More
Civil Works
-
-
-
... More
Pathways:
-
-
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge
-
-
-
... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
34.47
-
-
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead
479.8
-
-
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
-
-
-
... More
25 mm thick
459.6
-
-
... More
Existing stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
459.6
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge
26.33
-
-
... More
Toilets:
-
-
-
... More
15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 25mm to 40 mm SOR 2020 DAR 15.23
24
-
-
... More
15.45 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
Above 150 mm dia up to 300 mm dia SOR 2020 DAR 15.45
36
-
-
... More
15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. SOR 2020 DAR 15.60
24
-
-
... More
18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
18.9.9 100 mm nominal dia Pipes metre SOR 2020 DAR 18.9
50
-
-
... More
11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
11.41.2 Size of Tile 600x600 mm SOR 2020 DAR 11.41
24
-
-
... More
17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern SOR 2020 DAR 17.4
4
-
-
... More
17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
17.3.1 W.C. pan with ISI marked white solid plastic seat and lid SOR 2020 DAR 17.3
4
-
-
... More
15.12 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
15.12.2 Of area beyond 3 sq. metres SOR 2020 DAR 15.2
4
-
-
... More
14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
14.2.1 Door chowkhats SOR 2020 DAR 14.2.1
4
-
-
... More
14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the
dumping ground, all complete as per direction of Engineer-in- Charge.
14.2.2 Window chowkhats SOR 2020 DAR 14.2.2
4
-
-
... More
13.88 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary
repairs to scratches etc. complete SOR 2020 DAR 13.88
90
-
-
... More
15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts
involved. SOR 2020 DAR 15.60
50
-
-
... More
13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and
smooth complete SOR 2020 DAR 13.26
90
-
-
... More
15.57 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge SOR 2020 DAR 15.57
24
-
-
... More
26.6C Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958- 1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers,cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge SOR 2020 DAR 26.6C
24
-
-
... More
Water Body Renovation:
-
-
-
... More
15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 25mm to 40 mm SOR 2020 DAR 15.23
4700
-
-
... More
15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts
involved.SOR 2020 DAR 15.60
2200
-
-
... More
11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
11.41.2 Size of Tile 600x600 mm SOR 2020 DAR 11.41
4000
-
-
... More
Globe Demolition Work:
-
-
-
... More
15.2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) SOR 2020 DAR 15.2
20
-
-
... More
15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts
involved SOR 2020 DAR 15.60
20
-
-
... More
Channel System:
MS Channel Drainage system with dimension 300 x 300 mm to be laid along with pathways
150
-
-
... More
Supply, Installation on site, testing and commissioning of Pota Cabin with minimum dimension of 8' x 10' x 8' with LED tube lights, fan.
1
-
-
... More
ROTATING GLOBE INSTALLATION
-
-
-
... More
Rotating Globe Installation- Conceptual Visualisation, Design, Supply, Installation, and Execution of the SS perforated sheet( 3 MM), Blendable with the help of lase cutting and welding to make a globe with a diameter of 8 meters. The design should have the following constituents. Hollow MS Section( 25mm, 50 mm, 200 mm, 250 mm) Quantity as per design requirement, mild steel for welding, Fiber-reinforced Plastic (FRP) Material, Lightning fixture: without glare LEDs per and assembly of MS section to form the spherical shape application of SS material to cover the entire surface of the globe installation. LORD RAM WITH BOW & ARROW at the top will be made in FRP as per design( 6 ft height along with bow & arrow which length is up to 5 x 4 feet).
Foundation( 6 x 6 meters): RCC structure to withhold the globe of at least 3 meters in height.Should have a revolving mechanism having 2nos of 5 hp motor with reduction gear which will help the globe for rotation with the speed of 1 to 2 RPM.Approx Weight of Globe MS Structure including ss sheet .6050 kg. The Generation of the Torque of the motor of the globe shall be 9000 Nm. Highlighting the entire globe with the help of 10-12 parlight along with an additional 10mtr., Led strip with Suitable driver.
-
-
-
... More
Excavation for foundations, substructures, trenches, sumps, tunnels, pits, etc. in all types of ordinary, sandy, gravelly, murrum soil with or without boulders, hard soils, slashy/marshy soil including necessary shoring, strutting, and stacking selected material for backfilling or disposing excess excavated material within an initial lead of 100 m including dewatering complete as per specifications to depths from ground level.
-
-
-
... More
a) 0.0-1.5m
-
-
-
... More
b) 1.5-3.0m
92
-
-
... More
Disposal of surplus excavated material for the following leads beyond the initial lead of 100 m including loading/ unloading, dressing etc complete as per specifications
-
-
-
... More
a) Lead up to 500m
26
-
-
... More
Backfilling around foundations, pipes, trenches, sumps, pits, plinths, etc. shall be carried out with approved material in layers not exceeding 300 mm compacted thickness (higher thickness of layers upto 500mm with heavy mechanical compacting equipment) and each layer shall be compacted to 90% of standard proctor density for cohesive soils and to 80% of relative density for non-cohesive soils.
-
-
-
... More
a) With selected excavated earth
18
-
-
... More
PCC - 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size )
5
-
-
... More
RCC -1:1.5:3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size
46.5
-
-
... More
Shuttering :Centering and shuttering including strutting, propping etc. and removal of form for
148
-
-
... More
Reinforcement Work :Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more( M25)
3013
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class
designation 150 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
4.2
-
-
... More
Paint-Applying priming coat with metal primer on new steel or iron work including prepration of surface.
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on , metallic or plastered, concrete surface to give an even shade
1
-
-
... More
Structure & Framaing-Peroforated SS sheet (1.5 MM)) work riveted, bolted, laser cutting or argon welded & Ms welding in built-up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job.
1
-
-
... More
Framaing-MS pipe hallow section( 25 mm,50 mm, 200 m m& 250mm with 2 thickness) work riveted, bolted, laser cutting or argon welded & Ms welding in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job.
1
-
-
... More
Customised Mechanical,Electrical & Programing
-
-
-
... More
Supply, Installation, testing, and commissioning of customised electrical 5 hp( 2nos) & 3phase reduction gear, Motor Power: 5 HP
Voltage-380-415 v
Frequency: 50Hz, Motor Type: induction motor
No- load current-8.7 A
Full load current-28.2 A No of pole- 4, No- phases-3
Rated Speed- 3000rpm.
Ip rating-55, Efficiency Grade- IE2, Enclosure- TEFC
Motor Details: Cast iron, copper winding, rotor structure, winding type
Control Unit: Control Panel Type:wall-mounted, floor-standing
Control Voltage: e.g., 24V DC
Control Components: Include all necessary components such as contactors, relays, circuit breakers, etc.
Start/Stop Controls: Provide a clear interface for starting and stopping the motor.
Speed Control: Include a variable frequency drive (VFD) or other suitable speed control mechanism to achieve the required 1 to 2 RPM speed range.
Emergency Stop Button: Install an easily accessible emergency stop button for safety.
Motor Protection: Incorporate thermal overload protection and overcurrent protection for the motor.
Interlocks: Include any necessary interlocks to ensure safe operation.
HMI (Human-Machine Interface): HMI for monitoring and control.
Wiring and Cabling: Reputed make (Kei, Polycab, RR cable,) and signal cabling
Grounding: Implement proper grounding and bonding as per local electrical codes
Grounding: Implement proper grounding and bonding as per local electrical code.
1
-
-
... More
Lighting-Supply instalation of Parlight/ focus light( 10-12), along with led strip as required to cover the globe with sutiable cable & connector.
1
-
-
... More
Signages-Advance Direction sign board 1200x1800mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012 .
1
-
-
... More
Railing-Design, Manufacture, Supply and fixing of SS railing approx with grade 304 of any design and as per approved drawing by architect/consultant complete in all respects.
1
-
-
... More
Misc. Items
-
-
-
... More
Supply, Installation, testing and commissioning of Cooling- Manual. Cum Touchless for all three points. SS mat finish. Having cooling capacity of 8 GPH. Inbuilt purification and pressure system. Purification used (UV sterilizer + Sediment filer + Carbon) With all SS structure. should have ACTIVATION Bottle Filler: Manual (Touch-button)
Drinking Fountain: Manual (Push-button); FILTRATION Green Filter (optional), Built-in 100 micron strainer; DRAINAGE TYPE Built in drain, Removable drip tray; EXTERIOR Antimicrobial ABS Plastic, Brushed Stainless Steel; CHASSIS Heavy Duty Galvanised Steel; DIMENSIONS 1035(H) x 1003(W) x 483(D) (287 recessed); ALCOVE HEIGHT 265 mm; POWER SUPPLY 220-240V, 50/60 Hz; COOLING PERFORMANCE 60 LPH Rated Capacity & Base Rate
(10°C in 21°C amb. temp.); FULL LOAD AMPS 2.2A; RATED WATTS 340 W; ENERGY SYSTEM Refrigeration is on only when in use or if water temp increases during long period of standby; CERTIFICATIONS ANSI/NSF 61, CABO/ANSI A117.1, ADA, CE (LVD, EMC, RoHS), WRAS. Complete in all respects and as directed by engineer in charge
3
-
-
... More
Supply and fixing 3 seater metal benches should be designed as per the aesthetics and theme of the city with Cast iron arm rests and stand, with sitting base made up of Mild Steel, the bench should be powder coated to prevent corrosion and rusting duly fixed and grouted on the ground.
25
-
-
... More
Providing and fixing pair of Stainless Steel dustbins 100 litre volume, set of two different colours, for dry and wet waste, made of virgin plastic to be mounted on MS rectangular hollow section 50 x 25 x 3 mm frames pivoted on 3 MS square hollow section verticals, 1 m above ground, one 35 cm RHS welded to each vertical member at base and grouted in 180 x 40 x 30 cm 1:2:4 cement concrete.
12
-
-
... More
Re Design of G 20 logo
-
-
-
... More
Supply , installation & fixing of Customised new design logo consist of SS material with cnc cut, with acrylic sheet impose lighting of Synchonise color dedicated for G20 for each part ,highlighting wih led ( RGBW) modules with lighting conroller, connected to constant power suply with dedicated driver, customised fabrication( bending , section& improvisation of ms ) fully completed & support with civil work,( founation) & corrossin free structure completed in all respects.
1
-
-
... More
Rack for Equipment
-
-
-
... More
Supplying & Fixing of Floor Standing equipment Rack - 42U / 600w / 800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover with FHU provision. Top & Bottom cover with cable entry gland plates. Two pairs of 19” mounting angles with ‘U’ marking. Depth support channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs. Side Panels - 42U/800d Front MS Door perforated honeycomb 42U/600w Rear MS Door (Fully Perforated - Mesh) 42U/600w Fan 90CFM 230V AC, 4” dia Castors with Brake (set of 4) Cable manager 1U MS with Loops Shelf, Stationery 475mm N/W PDU 7Sockets 5Amps with MCB Mounting Hardware
1
-
-
... More
Conduit & HDPE Pipe
-
-
-
... More
Providing and laying Dia 25/30/50/100 mm HDPE &Electrical conduit pipe Conduits with Silicore Lubricant inner layer with ribs, dimensional ratio of 13.5,Deflection not greater than 5% when exposed to the normal operating temparature 90°C under the over burden soil presuure and other physical properties comforming to ASTMF 2160 and /or NEMA TC7.
1
-
-
... More
Supply Installation of Topiary as per the requirement and size at site.
1
-
-
... More
Supply and Installation of Division Wall 81 mtrs 2.5 Mtr with CNC Cut with Corten Steel wall with Necessary Foundation and Supporting Sutructure .
202.5
-
-
... More
Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used.
3500
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
5335
-
-
... More
Repair and Restoration of Existing structure by removing all the foreign material by Keep all the mortar joints of the wall rough, in order to ensure good bonding to hold the plaster ,all cracks shall be repair with thick mortar ratio 1:4
1050
-
-
... More
New -15 mm cement plaster on the rough side of single or half brick wall of mix :
720
-
-
... More
1:6 (1 cement: 6 fine sand)
-
-
-
... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
1770
-
-
... More
One or more coats on old work
-
-
-
... More
Comprehensive Operation & Maintenance for 1st Year (Including DLP) (0.5 % on BOQ Amount)
1
-
-
... More
Comprehensive Operation & Maintenance for 2nd Year (1 % on BOQ Amount)
1
-
-
... More
Comprehensive Operation & Maintenance for 3rd Year (1.25 % on BOQ Amount)
1
-
-
... More
Comprehensive Operation & Maintenance for 4th Year (1.5 % on BOQ Amount)
1
-
-
... More
Comprehensive Operation & Maintenance for 5th Year (2 % on BOQ Amount)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements