Lucknow Development Authority Tender

10 sq. mm 4 core

50 sq. mm 3-1/2 core

16 sq. mm 4 core

10 sq. mm 2 core

240 sqm 3.5 core

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.pwd 2018/801A

Incoming 100 Amp. TPN-1 No Outgoing 63 Amp. TNP-2 Nos. Cat. B. Cubicle Type

Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect.pwd 2018/645

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect.pwd 2018/1454 cat-AAA

Supply and fixing of M/S bracket (circular/sqaure shape) for fixing of four number LED flood light on top of pole complete of work with labour T&P etc as E/i

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 100 to 120 Watt. Confirming to IP 65 protection complete in all respect.pwd 2018/1453 cat-AAA

S/F of 20 E 27 CDL LED adore as per direction of I/ic make havells/bajaj/phillips/eqivalent (PSR)

Supply and fixing of decorative 40 to 45 Watt LED Post top indirect light luminaire having Pressure die cast aluminium body and Clear glass with driver set confirming to IP 65 and above protection complete in all respect. Pwd 2018/1443Cat-AAA

Supply and erection of perforated type cable trays made out of prefabricated galvinized sheet steel including tees bends crossing, reducers coupling to be laid in cable trenches over head on wall or hanged from ceilling including all neccessart supports brackets at every 1500 c/c grouting leveling suspension and fixing arragements dash fasteners G.I. nut & bolts complete in respect. (PSR) 750 Mm (w) X 50 mm (H) x 2 mm (T)

150mm (w) x 35 mm (H) x 1.5 mm (T)

PANEL-1, LT, METER PANEL BOARD Qty-1No. Design manufacturing Supply Installation testing and commissioning of LT METER Panel Board. The Panel shall be fabricated out of 1.6mm thick CRCA sheet steel, painted with Powder coated paint of shade as per the direction of Engineer In-Charge after proper sheet treatment process of sheet steel. The Bus bar of panel shall be of High grade Electrical grade High Conductive Aluminium alloy of appropriate cross section as per rating. The Calculation of continuous rating of Bus Bar shall be submitted. The Bus Bar shall be supported by non hygroscopic SMC/DMC Bus Bar supports which shall be mounted on proper interval to ensure bear the jerks of short Circuit as fault level require All Indicating Lights shall be LED type and all wiring shall be done from PVC Insulated copper flexible wire. The Panel shall be complete in all respect and shall consist of following material.(PSR)

Incoming MCCB 250 a TP 25 ka 01 nos

Phase indicator (R,Y,B) 1 set

Metering (MFM) 1 set

Bus Bar

250A TPN aluminium busbar 01 set

outgoing

MCB 63A FP 10 KA 25 nos

ACCL 63A DP 25 nos

Space for 3 phase KWH meter 25 nos

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.(Market Rate

Incoming 125 Amp MCCB 01 Nos Outgoing 90 DP MCB 10 Amp 90 Nos

Motorise control valve butterfly type block B1, B2, A-1, A-2, A-3 (water supply) (M.R)

Supply and burying earth electrode for lighting conductor of 600mm x 600mm x 3mm Copper plate vertically with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe for watering funnel, 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.pwd 2018/708

S&F of 200 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. Pwd 2018/379

S&F of 32 Amp. 415 V metal clad TPN HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respect.pwd 2018/326

PART (B)

Supply & Installation of 02 Open Gym

CHEST PRESS DIMENSIONS: PRODUCT AREA :3.6 FT X 2.8 FT SAFE PLAY AREA :7.6 FT X 6.8 FT FUNCTIONS: STRENGTHENS GLUTES, CHEST, SHOULDER, UPPER & MID ABS, FORE ARM & TRICEPS TECHNICAL SPECIFICATIONS: CENTER FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE MAIN FRAME: 40 NB & 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 32 NB & 25 NB GI B-CLASS PIPE-JINDAL MAKE CONNECTING PIPE: 32 NB & 25 NB & 40 NB GI B-CLASS PIPE - JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR BEARINGS: REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE

CYCLE DIMENSION: PRODUCT AREA: 3.2 FT X 2.2 FT SAFE PLAY AREA:7.2 FT X 6.2 FT FUNCTIONS: STRENGTHEN UPPER & LOWER LIMB, IMPROVES BODY CONSISTENCY & EGIBILITY, IMPROVE LUNGS & HEART EFFICIENCY AND STRENGTHENS HEART. TECHNICAL SPECIFICATIONS: MAIN FRAME: 25 NB & 40 NB GI B-CLASS PIPE-JINDAL MAKE SEAT FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE & SEAT: LLDPE STERING IS USED PIPE CAP: GALVANISED CAP. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

PULL UP STATION DIMENSIONS: PRODUCT AREA: 4 FT X 3.4 FT SAFE PLAY AREA: 8 FT X 7.4 FT FUNCTIONS: STRENGTHEN ABDOMINAL AND UPPER THIGH ALSO IMPROVES REFLEXES AND MIND BODY INTERACTION. TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB C-CLASS G.I. PIPES. -JINDAL MAKE BACK REST: DETACHABLE WITH 25NB GI B-CLASS WITH SPECIAL CASING-JINDAL MAKE HANDLE: 25 NB GI B-CLASS PIPE. -JINDAL MAKE CONNECTING MAIN HORIZONTAL PIPE: 50 N B GI B-CLASS PIPE-JINDAL MAKE INTERMIDIATE PIPE: 25 NB GI B-CLASS PIPE. -JINDAL MAKE PIPE END CAP: GALVANISED CAP. POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

AIR WALKER DIMENSIONS: PRODUCT AREA:4.8 FT X 2.1FT SAFE PLAY AREA:8.8FT X 6.1FT FUNCTION: STRENGTHENS LEG MUSCLES, IMPROVES CARDIO VASCULAR ENDURANCE TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE LEG FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 25 NB GI B-CLASS PIPE-JINDAL MAKE FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PIPE END CAP: GALVANISED CAP. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR BEARING SYSTEMS; SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. NUT BOLTS: GALVANISED NUT BOLTS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

TWISTER THREE WAY DIMENSIONS: PRODUCT AREA: DAIMETER 5.5 FT SAFE PLAY AREA: DIAMETER 11 FT FUNCTIONS: STRENGTHENS ABDOMINAL MUSCLE TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 20 NB GI B-CLASS PIPE JINDAL MAKE TWISTER DISC: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8" X 1.5". PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

PARALLEL BAR DOUBLE DIMENSIONS: PRODUCT AREA: 7 FT X 2 FT SAFE PLAY AREA: 13 FT X 4 FT FUNCTIONS: STRENGTHENS ARMS AND SHOULDER MUSCLES TECHNICAL SPECIFICATIONS: PARALLEL BAR: 25NB GI PIPE B-CLASS ISI MARK CLAMPS: NYLON 66 INJECTION MOULDED CASING CENTRE PIPE: 100 NB GI C-CLASS PIPE JINDAL MAKE PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR BEARINGS: REPUTED MAKE (FAG/SKF) STOPPER: PU ROD 50MM DIA NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

ROWER DIMENSIONS: PRODUCT AREA: 4.7 FT X 2.5 FT SAFE PLAY AREA: 8.7 FT X 6.5 FT FUNCTIONS: STRENGTHENS BACK MUSCLES, SHOULDER ARM MUSCLES AND ABDOMEN, ALSO IMPROVES CARDIO VASCULAR ENDURANCE. TECHNICAL SPECIFICATIONS: MAIN FRAME: 80 NB GI B-CLASS PIPE JINDAL MAKE SEAT FRAME:50 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE FRAME:32 NB GI B-CLASS PIPE-JINDAL MAKE PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS BEARINGS PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

TAI CHI SPINNER DIMENSIONS: PRODUCT AREA: 3.3 FT X 2.5 FT SAFE PLAY AREA: 7.3 FT X 6.5 FT FUNCTIONS: IMPROVES SHOULDER & HELPS IMPROVES WRIST ALIGILITY TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE SPINNING RING: LLDP ROTOMOULDING WHEEL. PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING HOUSING AND PIN:SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 FASTNERS. BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS. POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAD 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE.

ABB TRAINER DIMENSIONS: PRODUCT AREA: 5.7 FT X 2.1 FT SAFE PLAY AREA :9.7 FT X 6.1 FT FUNCTIONS: STRENGTHEN ABDOMINAL MUSCLES AND PREVENT LOWER BACK STRAIN TECHNICAL SPECIFICATIONS: MAIN FRAME IS MADE UP OF 40 NB & 32 NB GI B CLASS PIPE STIFFENER IS MADE UP OF 25 NB GI B CLASS PIPE. FOOT LOCK IS MADE UP 50 NB GI B CLASS PIPE ABB TRAINER TOP IS MADE UP OF LLDPE PLASTIC SIZE OF TOP WILL BE 375 MM X 1150 MM X 40 MM THICK COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN- CHARGE.