Khurja Development Authority Tender

Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. [SI.No.-279A] SOR-2022

M-150 class brickwork in 1 : 4 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work. [ S.I. No.–305(A)]2022

12 mm thick plaster with cement and COURSE sand of 2.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. [SI.No.-584 NEW ITEM] SOR-2022

R.C.C. work with cement, approved coarse sand and 20mm gauge stone grit in proportion of 1 :1.5 :3 in R.C.C. Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24B.W.G.G.I. binding wire and necessary centering and shuttering etc and also including supply of all materials labour & T&P etc. Excluding cost of Binding wire. [S.I. No. 289]-2022

M.S. or iron work of heavy sizes such as built up gates, door/windows frames etc. including cutting welding and wastage incliding supply of material, Labour T&P etc. and their fixing required for proper completion of the work. [503/SOR-2022]

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm ( base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm ) with zinc coating 120 grams per sqm as per IS : 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns . Sheet should I have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55 mm ) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces , excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required [DSR-2023/12.50]

Painting or varnishing work in small areas or new work with one coat (upto one sqm) of ready mixed paint and two coat of approved superiour quality ready mixed paint including supply of all Materials,labour,tools & plants etc. required for proper completion of the work.Paint to be used should confirm the ISI no.103-1950. [SI No.641+642]2022