Khurja Development Authority Tender

M-150 Brick work in 1:4 one cement & four Coarse sand 2.20 F.M. mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper completion of the work. [S.I. No. - 305(a)]

Earthwork in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 0.50 M. in depth and earth work in embankment to be in 20 cm layers including remming and dressing the surface to required levels and slopes and also including 1.50 M lift and 30M lead. The earth from cutting to be used in making embankment or to be deposited as spoil bank with-in 30M. Distance as directed by the E/I. excluding. Cartage of earth up to 5KM Distance.[SI.No.–231(a)+253(a)+261(b)]

Mechanically compacted to achieve 95% proctors density including arrangement of water, settlement and all T&P charges including roller and its fuel charges.[S.I. No. - 260]

Supply of 80mm thick precast cement concerete I-Shape' Interlocking paver blocks with top layer of minimum 8mm thickness having plan dimension 200x(160+120mm) of O.P. Cement] smooth high gloss finish, skid resistant; manufactred from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 40Mpa (M-40) and weight 5Kg per No. confirming to IS; 15658-2006 including cost of material, labour, T&P etc. required for proper completion of the work as directed by Engineer-in-charge. [Analysed Rate]

Dismantling existing plaster including disposal of refuse as directed by the engineer-in-charge within a distance of 60 meter (200 feet) [SI.No.–706]

12mm thick plaster with cement and approved coarse sand of 2.20 fineness modules mortar 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, T & P etc. required for proper completion of the work. [S.I. No.–584 New Item]

Cement Concrete with 2 cm gauge approved stone grit, Coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. [S.I. No. - 279 (a)]

M.S. or iron work in heavy sizes such as trusses, built up gates, record racks, roof work, gates, M.S. Grills etc. including riveting or welding where necessary. [SI.No.-502(a)]

Painting roofs or other iron work in large areas with two coat priming and two coat of approved (above one sq. Metre) paint (British antesol or equivalent) including supply of all materials, labour, Tools & Plants etc. required for proper completion of the work. Paint to be used should confirm the ISI No. 103-109. [SI.No.-644+645]

Finishing wall with water proof cement paint of approved make and quality on new c.c. with two coat to give an even shade including supply of all materials, labour, T&P etc. required for proper completion of the work. [SI.No.–660]

Supply & Fixing merry go round of 5 feet dia made of m.s. pipes of size 100 mm dia, 40 mm dia and 25mm dia, 2 beaving and plateform for made of 16 gauge m.s. sheet duly painted in two colours. [A.R.]

Made of 65 mm dia m.s. pipe (height above ground 8 feet) with m.s. chain of 8 mm dia and 12 mm thick patta for seat duly painted in two colours. [A.R.]

P/F slide made of 18 guage stainless steel sheet clangth of slide 12 feet) ladder made at 40 mm dia m.s. pipe and platform of size 20”X20” made of 40 mm square pipe duly painted in two colours. [A.R.]

P/F see saw made of 65 mm dia and 25 mm dia m.s. pipe seat of size 1’ dia made of 18 gauge m.s. seat length of see saw 6 feet duly painted in two colours. [A.R.]

Providing & Fixing of Shoulder Twirl having Dimension : • Product Area : 2m x 0.9m (6.6ft x 2.6ft)• Safe Play Area : 3m x 1.9m (9.8ft x 6.2ft)

• Ideal For : 13 Years & above

Function:

• Strengthens Shoulders & Arms.

• Improves shoulder agility.

Technical Specification:

•Post Dia: 80NB GI main vertical support pipe of Shoulder Builder is fixed over 10mm thick base plate. 10mm thick clamping plates are attached to main frame to hold the rest assemblies•Wheel Structure: 25NB Galvanized pipe bend to form ring of wheel and spokes are made up of 15NB G.I. pipes that connect to each other to form a wheel of Shoulder Twirl. Nylon knobs are provided on the wheels for gripping purpose. This wheel is fixed to main support with the help of 40NB connector pipe with specially designed bearing housing.•Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron.•Pipe Materials or Class: ('B' Class) Series of pipes only.Wall thickness of pipe varies according to class/series of pipe used.•Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Bearing Housing shall be made from solid bar of MS material.•Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement.•Pins and Circlips: 25mm diameter pins shall be made from EN8 material & Circlips made from standard material.•Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. [A.R.]

Providing & Fixing of Hip Twister Triple having Dimension : • Product Area :0.9m (3ft)• Safe Play Area : 1.5m (5ft)•Ideal for: 13 Years and above

Function:

•Stretches waist & Upper Body.

Technical Specification:

• Main Support: The main support of Hip twister consist of 100NB G.I Pipe.•Handle/Wheel: 25NB Galvanized pipe bend to form ring of wheel and spokes are made up of 15NB G.I. pipes that connect to each other to form a wheel.• Footrest: 40NB GI pipe is attached with main frame to form a foot rest having 130x50x5 thk plate•Standing or Rotating Disc : Standing Disc of 300mm Dia round size shall be made of HDPE/Metal. 15mm thick HDPE Sheet and Plate 10mm thick for base support.•Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement.• Foundation Stand: The foundation stand is made from 80NB GI Pipe having 200x10 thk Plate.•Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron.•Pipe Materials or Class: ('B' Class) Series of pipes only.Wall thickness of pipe varies according to class/series of pipe used.•Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI/PVC caps for user safety against entrapment.

[A.R.]

Providing & Fixing of Sky Walker having Dimension :

• Product Area : 1.8m x 0.9m (6ft x 3ft)

• Safe Play Area : 2.8m x 1.9m (9.2ft x 6.2ft)

• Ideal For : 13 Years & above

Technical Specification:

•Post Dia: The Main frame of Sky walker is 80NB GI main vertical support pipe is fixed over 10mm thick base plate.•Footrest and Handles: Footrest are made from square CRC Pipe 50x50x3 and handles from 25NB Dia galvanized pipe with Rubber grips.• Material used for Footrest are Aluminum/Nylon/HDPE/LLDPE.•Pipes: All metal pipes are Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness of 60micron.•Pipe Materials or Class: ('B' Class) Series of pipes only.Wall thickness of pipe varies according to class/series of pipe used.•Powder coating:it shall be done with pure polyester raw material.Dry film Thickness maintained within the range of 50-70 microns.it is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. •Bearing Housing shall be made from MS material.•Bearing: Bearings are oil sealed, self-lubricated made of SKF/ NTN/ NACHI make shall be provided for smooth & trouble-free movement.•Pins and Circlips: 35mm and 62mm diameter pins shall be made from EN8 material & Circlips made from standard material.•Nut and Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. [A.R.]

Supply & placing R.C.C. bench complete of the work as directed E/I. (B.D.A.Rate)