Khurja Development Authority Tender

Dismantling existing plaster including disposal of refuse as directed by the engineer-in-charge within a distance of 60 meter (200 feet) [SI.No.–706]

12mm thick plaster with cement and approved coarse sand of 2.20 fineness modules mortar 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, T & P etc. required for proper completion of the work. [S.I. No. – 584 New Item]

Painting or varnishing work in small areas or old wood or Iron work with One coat (upto one square meter of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, T & P etc. required for proper completion of the work. Paint to be used should confirm the ISI no. [SI.No.-643]

Polishing with French polish or wax polish (in proportion 2 bees wax : 1.5 Linseed oil : 1 turpentine oin 0.5 varnish by weight) on Previously polished wood based surface including cleaning the surface of all dirt, dust and sand prepared smooth and a coat of wood filter including supply of all materials, labour, Tools & Plant etc. required for proper completion of the work. [SI.No.-659]

Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). [SI.No.-692]

Supply and fixing of kota stone in flooring 20 mm thick and joints filled with 1:2 cement and coarse sand with approved colouring materials to be given and even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand mortar and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & Plants etc. required for proper completion of the work. [SI.No.–14.26 New Item]

M.S. or iron work in heavy sizes such as trusses, built up gates, record racks, roof work, gates etc. including riveting or welding where necessary. [S.I. No. - 503]

Painting 1st coat over priming coat (but excluaing cost of priming coat) on New wood surfaces up to 10cm width or girth or small articles not exceeding 0.10 sq. m in area with superior synthetic enarnel such as luxol 3 hi gloss Apcolita, Superlac, Dulux Specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign maber sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. Painting or varnishing work in small areas or new wood or Iron work with Two coat (upto one square meter of ready mixed priming paint and two coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, T & P etc. required for proper completion of the work. Paint to be used should confirm the ISI no. [S.I. No. – 642+641New]

Providing wall putty on old surface with approved quality material of berger/J.?K/Birla or similar make 2 coats. [S.I. No. – 15.22 New Item]