JV Jain College Tender

Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work, saplings of girth upto 30 cms, measured at a height of 1m. above ground level and removal of rubbish upto a distance of 50m. outside the periphery of area cleared. including cost of sand.(255(a))

Concrete with 40mm gauge stone ballast coarse sand and cement in proportion of 8:4:1 in foundation and under floors, Including supply of all material, labour and T&P etc. required for proper completion the work. (273)

M-150 Brick Work in 1:4 (One cement & four course sand) mortar in foundation and plinth including supply of all materials labour, tools and plants etc. required for proper completion the work.(drain) (305(a))

12cm thk. plaster with cement and fine sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials labour, tools and plants etc. required for proper completion the work (584(a))

Dismantling sundries brick work including stacking of dismantled materials as directed by the Engineer-in-charge with a distance of 60 metre (200 feet). (691)

Providing and laying PVC pipe 10cm.(Supreme make) (730(a))

Consolidation by road roller including hire and fuel charges etc. of the roller (752)

Construction of un-reinforced, dowel jointed at expansion and construction joint only plain cement concrete pavement, thickness as per design, over a prepare sub base 43 grade cement or any other type as per clause 1501.2.2 (1:1.5:3) coarse and fine aggregate not exceeding 25mm, mixed in a concrete mixer of not less then .2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side from work (sreel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing) spreading the concrete with shovels. rakes compacted using needle, screed and plate vibrators and finished in continuous operation including joints as per norms. applying debonding strips primer, sealant, dowel bars, near approaches to bridges/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 including cost of polythene sheet and dowel bar and also including complete shifting of materials & concrere etc. (M-20)Cement (Ultratech/Ambuja/Acc) (New Item 9)

Providing and laying 125 micron polythene sheet

Supply of 100mm precast cement concrete I-shape interlocking paver block ISI mark confirming to IS:15658-2006 with top layer of minimum 5mm thk having plan dimension 200x(160+120mm) of O.P cement smooth high glosh finish, skid resistant; manufacture fron rubber moulds through vibro-compression mechanics. The compression strength of concrete paver block shall not be less than 50 Mpa and weight 5 kg per including cost of material, with a blanket layer of 4.00 cm. thick fine sand including labour, T & P etc. required for proper completion of the work as directed by Engineer-in-charge. Testing report of each batch will be required. (New Item 14)