Jhansi Development Authority Tender

(B) 35 sq.mm 3-1/2 core UP PWD SOR NO -501 (K)

(C) 16 sq.mm 2 core UP PWD SOR NO -501 (C)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (PWD SOR.14.16)

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 140 to 150 Watt. Confirming to IP 66 Protection complete in all respects CAT-AAA UP PWD SOR - 1425

Supply and fixing 15 A TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. UP PWD SOR No - 807 (D)

Supply and burring of Safe Earthing Electrode T-39 (Hot- Dip Galvanized), Length up to 3000m, outer pipe 76mm inner Dia 38mm terminal Dia 12mm, outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P.P.W.D., & C.P.R.I. Certified. UP PWD SOR 735/D

Supply and laying of 25mm X 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. UP PWD SOR - 716

Supply & Wiring of Submains with 02 Nos 2.5 sqmm FRLSH PVC Insulated 1100 V Grade Single Ce Multistrand Copper Conductor cable in existing PVC Conduit Complete including Supply of all Material, Labour and T&P etc required for proper Completion of Work as per Direction of Engineer in Charge

Supply and fixing of plain or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. (A) 50 sq. mm UPPWD SOR- 504-g

(B) 35 sq.mm UP PWD SOR - 504-f

(C) 16sq. mm UP PWD SOR - 504-d

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for diffrent readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 100 Amp MCCB-1 No & Outgoning 63 Amp. MCCB-1 No & 32 Amp. MCCB-2 Nos. Cat. B. Pannel Cubicle Type. UP PWD SOR No. - 811-A-ii

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer- Incharge. (A) 50 sq. mm 3-1/2 core UP PWD SOR - 503 (I)

35 sq. mm 3-1/2 core UP PWD SOR - 503 (K)

Numbering of pole with as per direction of Engineer in charge

Supply & Fixing of Radium Strip red and white on Pole as per Direction of Engineer in Charge

Cement Conrete with 4 cm (1.5") gauge UP PWD SOR No. 281

R.C.C Work 1:1:5:3 PWD - 288 (1)

MS or Iron Plain Work SI No. 504

12 mm Cement Plaster UP PWD SOR No. 17.58

S/F of 6 Amp to 32 Amp DP MCB for Controlling of Street Light, including Cost of Din Mounting Rail, Connecting Strip, Earth Link etc Complete In all Respect

Supply and fixingfollowingcapacity of automatic street light cubicle control panel painted with anti corrosive alkaliand acid proof paint consistingof time switch TSO 100 series with contactors, HRC fuses, isolatingswitch metering instrument& instrumentbox with CTs etc. in case of TPN, complete in all respect.(15 A TPN) PWD SOR-811

S&F of 63 Amp. 415 V metal clad T.P. rewireable type switch fuse unit on angle iron bracket complete in all respect.(PWD SOR 313)

Barbed wire(UPPCL COST DATA)

DANGER Board with clamp (UPPCL COST DATA)