Jhansi Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Jhansi Development Authority - JDA Tender
Healthcare and Medicine
Eprocure
Opening Date4 Mar 2023
Closing Date15 Mar 2023
Tender Amount₹ 5,24,09,368
Costs
EMD
₹ 28,20,470Document Cost
₹ 11,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_UPJDA_781729_1Bid Award Id
ViewTender No
5244/JDA/2022-23Tender Authority
Jhansi Development Authority ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Sand filling In plinth including suppty of necessary quantity of sand from a distance not exceeding 8 km.(5 miles) from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. (Rate is Including Royality) Ref No. 255
137
272630
1990
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Ref No. 0
3607.6
703482
195
CONCRETE WORK
Concrete with 4 cm(1.5") gauge brick ballast fine local sand of
1.25 Fineness modulous and cement in Proportion of 12:6:1 in
foundation and under floors including supply of all materials labour and T&P etc. required for proper completion of the work Ref NO. 273
As in item (273) above but in the_proportion of 10:5:1 Ref No. 274
128
865280
6760
Cast cement concrete door sills, chaukhats boundry posts, shelves and similar small work with cement, approved coarse sand and 2 cm. (314") gauge approved stone ballast
in the proportion of 1 : 2 :4 , excluding supply of
reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including the cost of binding wire, moulds and all other materials, labour and T&P etc required for proper Completion of the work. Ref No. 282
4.42
30232
6840
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Ref No. 4.17
126
76686
608.62
REINFORCED CEMENT CONCRETE
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.dsr-5.22
Thermo-Mechanically Treated bars of grade Fe-500D or more.dsr-5.22.6
44740
3580989
80.04
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.dsr-5.3
167
9647
57.77
R.C.0 work with cement approved coarse sand and 2 cm. ,(3/4") gauge approved stone ballast in the proportion of
11:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and (binding the same with 24 B.W.G.G.I binding wire and
lincluding necessary centering and shuttering etc. and also including supply of all materials, labour& T&P etc . required forproper completion of the work. Binding w ire cost being
_included in the item. Ref No. 283(1)
As in item 283(1) above but in RCC at foundation and footing with 4 cm 1.5" gauge approved stone ballast Ref No. 287(1)
111.83
781691
6990
As in item 283(1) above but in RCC T beam and slab foofs and RCC Columns Ref No. 288(1)
260.99
2309761
8850
BRICK WORK6
First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T & P etc required for proper completion of the work Ref No. 303
Cement mortar 1:6 (1 cement : 6 fine sand)
19.76
120338
6090
As in item (301 to 304) above but in superstructure. Including necessary cutting and moulding of bricks as requiered and also including honey comb brick work, thickness of wall not to be less than 1.5 brick thick. Add extra labour to above item no. 301 to 304. Ref No. 309
Cement mortar 1:6 (1 cement : 6 fine sand)
160.27
1024125
6390
As in item (309) above but for wall of half brick (4 1/2") thick. Add for extra labour over item No. 310. Ref No. 310(a)
Cement mortar 1:6 (1 cement :6 fine sand)
423.76
2762915
6520
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.dsr-6.15
423.76
32708
77.19
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).dsr-6.44
167
8319
49.82
MARBLE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.dsr-8.2
Granite of any colour and shadedsr-8.2.2
Area of slab over 0.50 sqmdsr-8.2.2.2
8.78
34691
3951.21
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.dsr-8.3
Granite workdsr-8.3.2
14.64
5474
373.97
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.dsr-8.4
14.64
6216
424.6
WOOD WORK & PVC WORK9
Additional cost for fixing glass panes with C.P. Teak wood beading and felt as directed by Engieer-in-charge Instead of putty and brad including cost of all materials, labour and T & P
etc. required for proper completion of the work Ref No. 410
85.4
18788
220
As in item 470 but of C P. Teak decorative type (one side only) and commercial lipping approved ply wood flush shutters 4 cm
(1 /2") thick. As in item 470 but of C P. Teak decorative type (one side only) and commercial lipping approved ply wood flush shutters 4 cm. (1 1/2") thick. Ref No. 477
88.52
415158
4690
As in item 478 but with Teak lipping single leaf door. Add extra to item 478 Ref No. 479
88.52
9737
110
Supply and fixing of 4 cm (1 1/2") thick C. P. Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm.(1/10 or 1/12 or 1/6 inch) mesh or any other size with necessary beading, including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinges bolts, locks, handles, spring and/or other fittings but excluding their supply and including two coats of black Japan on all iron fittings, if necessary. (Fittings with necessary screws to be supplied departmentally). Ref No. 450
88.52
382406
4320
Supply of M.S. Grill of a approved quality and drawing made of flat iron not bigger then 20x4 mm size including supply of materials, fabrication, labour, T&P and also one coat of red oxide paint complete in all respect as per direction of Engineer-in- charge for proper completion of work at site. Ref No. 3
19.45
170771
8780
Supplying and fixing galvanised Mosquitos proof,heavy quality Iron wire gauge or expanded metal ef heavy quality over windows and including supply and fixing of C. P. Teak wood battens 8 cm X 1 cm (3"x3/8") and including supply of necessary screws, all materials, labour and T&P etc. required for proper completion of the work, Ref No. 455
96.31
75121
780
STEEL WORK
Providing and fixing 1 mm. thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6 mm. (1 1/2"x1 1/2"x1/4") angle iron, 3.15 mm. (1/8") gusset plates at the junctions & corners, hooks at top, 25 mm. (1"), dia. pulleys at bottom, 40 X 40 x 6 mm.(1 1/2"x1 1/2"x1/4") angles & T iron guides at top & bottom respectively includiug locking arrangement with handles, etc. complete and applying one priming coat of approved lead paint. Ref No. 519
2.52
7207
2860
Supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work Ref No. 1
38.52
380577
9880
Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work. Ref No. 2
6.3
58779
9330
Mild steel or iron work of small Sizes and Sections such as holding down bolts, hold fasts, tie, rods, gratings etc. (when not included in an over all rates) wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work. Ref No. 502
1.44
14688
10200
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :dsr-10.3
4.0 mm thick glass panesdsr-10.30.1
85.4
71697
839.55
FLOORING
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : Ref No. 14.43
25 mm thick.
4
3800
950
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Ref No. 14.43
50.54
48013
950
Supply and fixing 5 mm thick China white glazed tiles So in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work. (size of tiles upto 200 x 300 mm) Ref No. 628
145.69
138405
950
Supply and fixing 5 mm thick China white glazed tiles So in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work. (size of tiles upto 200 x 300 mm) Ref No. 628
70.6
67070
950
Providing & Laying of 8 to 10 mm thick ivory or light Sqm shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work. Ref No. 14.43
Size of Tile 600x600 mm
650.91
1142347
1755
Providing & Laying of 8 to 10 mm thick ivory or light Sqm shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work. Ref No. New item no 2
Size of Tile 600x600 mm
65.09
119895
1842
ROOFING
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.dsr-12.22
4
952
238.04
FINISHING
12 mm Cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extral for mixing any additive Ref No. 17.58
1:3 (1 cement: 3 coarse sand)
803.15
146976
183
15 mm Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. In girth and finished even and smooth. Ref No. 17.59
1:3 (1 cement: 3 coarse sand)
1116.23
257849
231
6mm cement plaster of mixdsr-13.16
1:3 (1 cement : 3 fine sand) 13.16.1
908.92
190755
209.87
White washing one supply of all Sqm.materials,labour and T&P etc. required for proper completion of the work. Ref No. 671
As in item No. 671 above but 3 coats white washing 2 coats as per item 672. Ref No. 673
908.92
15269
16.8
One priming coat & one coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. Ref No. 649
803.15
37748
47
Finishing walls with water proofing cement paint of Sqm approved make and quality on new work with two coat to give to give an even shade. Including supply of all material, labour and T&P etc. required for proper completion of the work. Ref No. 660
1116.23
63625
57
Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the 1.S.I.No. 103 1950 Ref No. 641
Primer Wood Work
318.65
21668
68
Primer Steel Work
264.57
17990
68
Painting roofs or other iron work in large area with one coat of ready mixed paint priming one coat of approved paint (British ANTISOL) including supply of all materials, labour & T&P etc. required for proper completion of the work. Paint to be used should confirm LSI.No. 103-1950. Cost for area of 650 Sft. Priming Coat Ref No. 644
Two or more coats on new work
562.06
32037
57
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :dsr-13.65
Two or more coats on new workdsr-13.65.1
50.1
5148
102.77
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dsr-13.80
1919.38
212245
110.58
WATER PROOFING
Providing & Laying "brick bat coba" 100 mm thick laid with M-S 150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight & Including supply of all materials labour T&P etc required for proper completion of worksNew item-1
910
979160
1076
Supply & filling of cinder in sunken portion of building including breaking into required sizes including supply of all material, labour, T&P required sizes including supply of al material, labour. T&P required for proper completion of work
2.19
3536
1615
External Elevation
1
600000
600000
PART-B PLUMBING WORK (SANITARY WORKS)
EARTH WORK
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Ref. No2.1
All kinds of soil Ref. No2.10.1
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia Ref. No2.10.1.2
40
12631
315.79
ROOFING
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. Ref. No12.41
110 mm diameter Ref. No12.41.2
112
27097
241.94
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Ref. No12.42
Coupler Ref. No12.42.1
110 mm Ref. No12.42.1.2
45
4084
90.76
Bend 87.5° Ref. No12.42.5
110 mm bend Ref. No12.42.5.2
45
4494
99.88
Shoe (Plain) Ref. No12.42.6
110 mm Shoe Ref. No12.42.6.2
45
3948
87.74
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. Ref. No12.43
110 mm Ref. No12.43.2
60
14051
234.19
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. Ref. No12.44
16
579
36.25
SANITARY INSTALLATIONS
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Ref. No17.3
W.C. pan with ISI marked black solid plastic seat and lid Ref. No17.3.2
8
41329
5166.13
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: Ref. No17.7
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Ref. No17.7.4
8
16534
2066.77
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Ref. No17.1
Kitchen sink with drain board Ref. No17.10.1
510x1040 mm bowl depth 250 mm Ref. No17.10.1.1
1
4546
4546.35
Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. Ref. No17.16
8
1012
126.55
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. Ref. No17.31
8
8542
1067.76
Providing and fixing toilet paper holder : Ref. No17. 34
Vitreous china Ref. No17.34.2
8
2802
350.33
Providing and fixing soil, waste and vent pipes : Ref. No17. 35
100 mm dia. Ref. No17.35.1
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Ref. No17.35.1.2
10
8152
815.22
75mm diameter Ref. No17.35.2
Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Ref. No17.35.2.2
125
98564
788.52
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : Ref. No17. 37
For 100 mm dia. pipe Ref. No17.37.1
35
8168
233.39
For 75 mm dia. pipe Ref. No17.37.2
2
460
230.36
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Ref. No17. 38
100 mm Ref. No17.38.1
Sand cast iron S&S as per IS - 3989 Ref. No17.38.1.2
18
8139
452.18
75 mm Ref. No17.38.2
Sand cast iron S&S as per IS- 3989 Ref. No17.38.2.2
2
686
343.07
Providing and fixing plain bend of required degree. Ref. No17. 39
100 mm Ref. No17.39.1
Sand cast iron S&S as per IS : 3989 Ref. No17.39.1.2
18
5989
332.74
75 mm Ref. No17.39.2
Sand cast iron S&S as per IS - 3989 Ref. No17.39.2.2
2
451
225.64
Providing and fixing heel rest sanitary bend Ref. No17. 40
100 mm dia Ref. No17.40.1
Sand cast iron S&S as per IS - 3989 Ref. No17.40.1.2
4
1330
332.74
75 mm dia Ref. No17.40.2
Sand cast iron S&S as per IS - 3989 Ref. No17.40.2.2
2
613
306.64
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. Ref. No17. 43
100x100x100mm Ref. No17.43.1
Sand cast iron S&S as per IS - 3989 Ref. No17.43.1.2
9
4980
553.42
75x75x75mm Ref. No17.43.1
Sand cast iron S&S as per IS - 3989 Ref. No17.43.2.2
1
434
434.17
Providing and fixing single equal plain junction of required degree Ref. No17. 44
75x75x75mm Ref. No17.44.2
Sand cast iron S&S as per IS - 3989 Ref. No17.44.2.2
1
377
377.5
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : Ref. No17. 55
100 mm Ref. No17.55.1
Sand cast iron S&S as per IS - 3989 Ref. No17.55.1.2
10
4623
462.32
75 mm Ref. No17.55.2
Sand cast iron S&S as per IS - 3989 Ref. No17.55.2.2
2
686
343.07
Providing and fixing terminal guard : Ref. No17. 56
100 mm Ref. No17.56.1
Sand cast iron S&S as per IS - 3989 Ref. No17.56.1.2
9
2994
332.74
75 mm Ref. No17.56.2
Sand cast iron S&S as per IS - 3989 Ref. No17.56.2.2
1
235
235.74
Providing and fixing collar : Ref. No17. 57
100 mm Ref. No17.57.1
Sand cast iron S&S as per IS - 3989 Ref. No17.57.1.2
20
6654
332.74
75 mm Ref. No17.57.2
Sand cast iron S&S as per IS - 3989 Ref. No17.57.2.2
1
205
205.4
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : Ref. No17. 58
100 mm Ref. No17.58.1
25
10397
415.9
75 mm Ref. No17.58.2
20
7058
352.91
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : Ref. No17. 59
100 mm Ref. No17.59.1
9
876
97.35
75 mm Ref. No17.59.2
1
60
60.61
Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : Ref. No17.61
100 mm dia Ref. No17.61.1
30
13976
465.87
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : Ref. No17.65
75 mm diameter pipe Ref. No17.65.2
10
400
40.03
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Ref. No17.69
Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms Ref. No17.69.2
12
996
83.01
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Ref. No17.7
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms Ref. No17.70.1
8
1967
245.99
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. Ref. No17. 71
8
885
110.7
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. Ref. No17.73
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. Ref. No17.73.2
8
3634
454.26
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Ref. No17.1
Kitchen sink with drain board Ref. No17.10.1
510x1040 mm bowl depth 250 mm Ref. No17.10.1.1
1
4546
4546.35
Providing and fixing 8mm dia C.P / S.S Jet with flexible tube upto 1 metre long with S.S triangular plate to Eureopean type W.C of quality and make as approved by engineer-in-charge. Ref. No17.16A
2
453
226.51
External work Providing and fixing G.I. pipes complete with G.I. fittings including trenching & refilling. Ref. No18.12
32mm dia nominal bore Ref. No18.12.4
30
10389
346.32
40mm dia nominal bore Ref. No18.12.5
30
12674
422.48
WATER SUPPLY
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Ref. No18.7
Internal work - Exposed on wall
20 mm nominal outer dia Pipes Ref. No18.7.2
100
24599
245.99
25 mm nominal outer dia Pipes Ref. No18.7.3
100
30913
309.14
32 mm nominal outer dia Pipes Ref. No18.7.4
50
18952
379.05
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Ref. No18.8
Concealed work, including cutting chases and making good the walls etc.
15 mm nominal outer dia Pipes Ref. No18.8.1
60
20027
333.8
20 mm nominal outer dia Pipes Ref. No18.8.2
60
23324
388.74
25 mm nominal outer dia Pipes Ref. No18.8.3
30
14211
473.7
32 mm nominal outer dia Pipes Ref. No18.8.4
25
13482
539.31
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : Ref. No18.13
25 to 40 mm nominal bore Ref. No18.13.1
2
1145
572.86
Providing and fixing brass stop cock of approved quality : Ref. No18.16
15 mm nominal bore Ref. No18.16.1
2
459
229.91
20 mm nominal bore Ref. No18.16.2
16
3970
248.14
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : Ref. No18.17
25mm nominal bore Ref. No18.17.1
24
9667
402.81
32mm nominal bore Ref. No18.17.2
12
5356
446.36
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : Ref. No18.18
25 mm nominal bore Ref. No18.18.3
10
3020
302.02
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : Ref. No18. 20
25 mm nominal bore Ref. No18.20.3
10
3382
338.23
Providing and fixing uplasticised PVC connection pipe with brass unions : Ref. No18.21
45 cm length Ref. No18.21.2
15 mm nominal bore Ref. No18.21.2.1
16
1031
64.47
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : Ref. No18.22
100 mm diameter Ref. No18.22.1
5
629
125.87
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Ref. No18. 48
Rectangular tank Ref. No18. 48B
10000
73389
7.34
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : Ref. No18.49
15 mm nominal bore Ref. No18.49.1
30
9856
328.54
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. Ref. No18.51
15 mm nominal bore Ref. No18.51.1
40
21440
536.02
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. Ref. No18.52
15 mm nominal bore.Ref. No18.52.1
4
1800
450.03
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Ref. No18. 53
15 mm nominal bore Ref. No18.53.1
20
7571
378.59
Providing and fixing PTMT grating of approved quality and colour. Ref. No18.58
Circular type. Ref. No18.58.1
100 mm nominal dia. Ref. No18.58.1.1
25
627
25.12
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. Ref. No18. 77
15
4280
285.34
SEWARAGE & DRAINAGE
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : Ref. No19.1
100 mm diameter Ref. No19.1.1
10
2843
284.31
150 mm diameter Ref. No19.1.2
30
13424
447.49
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : Ref. No19. 2
100 mm diameter S.W. pipe Ref. No19.2.1
10
6775
677.58
150 mm diameter S.W. pipe Ref. No19.2.2
30
24859
828.65
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70
kg as per standard design: Ref. No19.4
180 x 150 mm size P type Ref. No19.4.3
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Ref. No19.4.3.1
13
24925
1917.37
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Ref. No19.7
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : Ref. No19.7.1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Ref. No19.7.1.1
10
88431
8843.14
Extra for depth for manholes :
Size 90x80 cm Ref. No19.8.1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Ref. No19.8.1.1
10
61497
6149.7
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. Ref. No19. 16
10
3685
368.57
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : Ref. No19.21
For pipes 100 to 250 mm diameter Ref. No19.21.1
2
1034
517.33
Providing, laying and jointing non pressure NP2 class (light duty)RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Ref. No19.6
150 mm dia RCC pipe Ref. No19.6.2
10
3731
373.11
250 mm dia RCC pipe Ref. No19.6.3
80
49101
613.76
(PART-C) ELECTRICAL WORK WIRING IN STEEL AND PVC CONDUIT
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR 2022 Sl. No. 1.3
Group A Sl. No. 1.3.1
35
36216
1034.75
Group B Sl. No. 1.3.2
54
67087
1242.37
Group C Sl. No. 1.3.3
85
131318
1544.92
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR 2022 Sl. No. 1.5
2140
785273
366.95
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. DSR 2022 Sl. No. 1.7
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Sl. No. 1.7.2
1505
470628
312.71
4 X 6 sq. mm + 2 X 6 sq. mm earth wire Sl. No. 1.7.9
50
39152
783.05
4 X 10 sq. mm + 2 X 6 sq. mm earth wire Sl. No. 1.7.10
100
88226
882.26
4 X 16 sq. mm + 2 X 6 sq. mm earth wire Sl. No. 1.7.11
100
139407
1394.07
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. DSR 2022 Sl. No. 1.18
2 Pair Sl. No. 1.18.2
80
2576
32.2
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. DSR 2022 Sl. No. 1.2
25 mm Sl. No. 1.20.2
78
16922
216.95
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. DSR 2022 Sl. No. 1.24
5/6 A switch Sl. No. 1.24.1
302
26361
87.29
15/16 A switch Sl. No. 1.24.3
64
8460
132.2
3 pin 5/6 A socket outlet Sl. No. 1.24.4
133
13750
103.39
6 pin 15/16 A socket outlet Sl. No. 1.24.5
64
10684
166.95
Telephone socket outlet Sl. No. 1.24.6
4
501
125.42
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. DSR 2022 Sl. No. 1.25
39
12195
312.71
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. DSR 2022 Sl. No. 1.26
18
610
33.9
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. DSR 2022 Sl. No. 1.27
1 or 2 Module (75mmX75mm) Sl. No. 1.27.1
23
5808
252.54
3 Module (100mmX75mm) Sl. No. 1.27.2
119
32977
277.12
4 Module (125mmX75mm) Sl. No. 1.27.3
13
3778
290.68
6 Module (200mmX75mm) Sl. No. 1.27.4
10
3406
340.68
8 Module (125mmX125mm) Sl. No. 1.27.5
21
8079
384.75
12 Module (200mmX150mm) Sl. No. 1.27.6
12
5562
463.56
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. DSR 2022 Sl. No. 1.33
11
811
73.73
Installation,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. DSR 2022 Sl. No. 1.35
243
24506
100.85
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. DSR 2022 Sl. No. 1.45
39
11204
287.29
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. DSR 2022 Sl. No. 1.49
297
14348
48.31
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. DSR 2022 Sl. No. 1.5
Upto 450 mm sweep Sl. No. 1.50.1
11
4194
381.36
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. DSR 2022 Sl. No. 1.51
11
1929
175.42
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. DSR 2022 Sl. No. 1.54
Group A Sl. No. 1.54.1
31
20412
658.47
Group B Sl. No. 1.54.2
46
36566
794.92
Group C Sl. No. 1.54.3
46
42647
927.12
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. DSR 2022 Sl. No. 1.57
10
6161
616.1
Telephone cable, 0.5 mm solid annealed cu., jelly filled
Supply installation, testing and commissioning of 0.5 mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filled with poly-al laminate moisture barrier, polythene sheathed, unarmoured polythene jacketed telephone cables as per DOT specifications of following sizesNSR
10 Pair Sl. No. N1
100
6000
60
Telephone tag block
Supply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below:NSR
10 Pair Sl. No. N2
1
154
154
MCB DBs AND ACCESSORIES
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive ofV 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) DSR 2022 Sl. No. 2.5
8 way (4 + 24), Double door Sl. No. 2.5.2
2
17228
8614.41
12 way (4 + 36), Double door Sl. No. 2.5.3
2
21750
10875.42
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR 2022 Sl. No. 2.1
Single Pole Sl. No. 2.10.1
94
20393
216.95
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. DSR 2022 Sl. No. 2.11
12
132
11.02
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR 2022 Sl. No. 2.12
63 A Sl. No. 2.12.2
8
7010
876.27
Supplying and fixing following rating, four pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.13
63 A Sl. No. 2.13.2
2
1752
876.27
100 A Sl. No. 2.13.3
2
2079
1039.83
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required. DSR 2022 Sl. No. 2.25
2
1770
885.29
LIGHTING FIXTURES & FANS
Supplying LED 18W Recess / Surface Mounting, CCT‐6000K, CRI70, PF0.95, Downlighter complete as required of approved make.NSR N3
106
198220
1870
Supplying LED 15W, CCT‐6000K, CRI70, PF0.95, Mirror Light complete as required of approved make.NSR N6
13
12662
974
Supplying LED 20W, CCT‐6000K, CRI70, PF0.95, Tube Light Fixture complete as required of approved make.NSR N7
29
8352
288
Supplying LED 43 W, CCT‐6000K, CRI 70, PF0.95, 2'x2' Size Panel Light Fixture complete as required of approved make.NSR N8
95
611325
6435
Supplying Star rated double ball bearing capacitor start, aluminium body & blade 1200 mm Sweep 5 Star rated ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor etc. complete as required of standard approved make.NSR N9
39
75270
1930
Supplying Star rated High Air Throw 1300 ~ 1400 RPM single phase ISI marked 400 mm sweep (1300~1400 RPM) Wall Mounted fan with adjustable speeds in 5 steps by pull chord switch, etc. complete as required of standard approved make.NSR N10
4
11656
2914
Supplying Heavy duty capacitor start, Double ball bearing 900 / 1400 RPM single phase ISI marked 300 mm sweep (900/1400 RPM) Exhaust fan, IS:2312 marked etc. complete as required of standard approved make.NSR N11
11
40634
3694
Supplying Iron and Aluminium Louver for Exhaust comple as reqyuired of approved make.NSR N12
11
5577
507
EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.DSR 2022 Sl. No.5.4
2
11307
5653.75
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)DSR 2022 Sl. No.5.9
30
3268
108.96
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.DSR 2022 Sl. No.5.11
5
2671
534.2
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.DSR 2022 Sl. No.5.15
10
1846
184.63
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.DSR 2022 Sl. No.5.16
10
431
43.14
Intercom / EPABX Systems
Supply, installation, testing and commissioning of EPABX system consisting of 8 Nos. extensions complete as required of approved make.NSR N13
1
5017
5017
PART-D FIRE FIGHTING
Sub-Head (Fire Pumps & Accessories) A
Supply, Erection, testing & Commissioning of electric motor driven automatic pump set consisting of the following as per specifications: (i) Horizontal mounted centrifugal type single stag fire pump for building pressure loss due to any leakage in the system and capable to deliver approx. 900 LPM against a total head of 40 Mtr. having cast iron body, bronze impeller , stainless steel shaft . (ii) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volt (+,- 10%) 3 Phase 50 Hz. AC Supply of suitable capacity for the above pump with Synchronous speed of 2900 rpm confirming to IS:325.(iii) Common base plate for mounting pump and motor fabricated of suitable MS channel and coupling, guard etc.
900LPM 40 Mtr. Head
1
48000
48000
Design, manufacture, supply, storing, inspection, handling, assembling, installation in correct alignment, position, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical type Electrical Control Panel for fire fighting pumps floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 52. Complete with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors. Complete with all inter connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels, The Copper Bus Bar shall be of suitable length, 200 Amp., 3 phase 50 Hz TPN, electrolytic copper. The panel shall be provided with interlocking arrangement between electric motor driven and diesel engine driven pumps. Provisions shall be made for providing potential free contacts to all pump starters for connection to building automation system / Fire alarm control panel. The fault withstanding capacity of panel shall be 35 KA rms for 1 sec.Following Fire fighting pumps shall have to be controlled - Incomer : 160 AMP FP MCCB with flush mounting square CT operated ammeter with selector switch, Voltmeter with selector switch, protective fuses and phase indicating lamps. Outgoings : 1 nos. 100 AMP TPN MCCB with star delta starter suitable for sprinkler pump with CT operated ammeter with selector switch and indication lamps for "On" "Off" and "Trip" mounted on the cubicle door. 2 nos. 63 AMP TP MCCB with star delta starter suitable for jockey pump with CT operated ammeter with selector switch and indication lamps for "On" "Off" and "Trip" mounted on the cubicle door.
1
18000
18000
Providing & fixing double flanged vertical air Pressure vessel fabricated form 8mm M.S. Plate with dished ends from 8mm M.S. Plate out side with one coat at primer and two coat of synthetic enamel paint of approved shade complete with approved quality to operate at drop of pressure automatically at required pressure setting. Recommended Dia 150 MM Working Pressure – 7 K.g/Sqcm. Test Pressure – 10 Kg/Sqcm
1
16000
16000
Providing, fixing of Pressure Gauge of required capacity as per fire fighting nobs.
Pressure Test Gauge connects to any ¾ “ garden hose connection and is just the thing for quickly checking residential or commercial water systems for pressure problems. The PG150 Water System Pressure Test Gauge's re-settable maximum pressure hand stays at the water system’s highest pressure point during the test period. The Water System Pressure Test Gauges provide a quick indicator of any pressure spikes that might have occurred.
1
2800
2800
Providing and fixing, C.I. double flanged horizontal / vertical type Check valve NON return valve (NRV) including nuts, bolts 3 mm thick rubber insertions compete to IS : 5312 Part – 1 swing type class PN : 1-6.
Providing, fixing of Pressure switch to operate of fire pump automatically on/off.
Pressure switch is a form of switch that makes electrical contact when a certain set pressure has been reached on its input. This is used to provide on/off switching from a pneumatic or hydraulic source. The switch may be designed to make contact either on pressure rise or on pressure fall.
1
3200
3200
100 mm Dia
1
5500
5500
Providing & fixing of butter fly valve suitable for pressure 15 kg/cm2 with flanges. Nut bolts and gasket complete as required.(PN : 1-6 type)
Butterfly valve is a type of flow control device, typically used to regulate a fluid flowing through a section of pipe A flat circular plate is positioned in the center of the pipe. The plate has a rod through it connected to an actuator on the outside of the valve. Rotating the actuator turns the plate either parallel or perpendicular to the flow. Unlike a ball valve, the plate is always present within the flow, therefore a pressure drop is always induced in the flow regardless of valve position. butterfly valve is from a family of valves called quarter-turn valves. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the process fluid. The valve may also be opened incrementally to regulate flow.
100 mm Dia
2
11600
5800
Providing & fixing of CI 'Y' type strainer flanged with SS 304 perforated screen.
“Y” type including, nuts, bolts and 3mm thick rubber insertion complete.“Y” Strainer is rated for 640 psi (44.1 Bar) at 100°F (38°C). The “Y” Strainer provides economical strainer protection for piping equipment such as pumps, meters, valves, compressors, traps and similar equipment. The inlet and outlet ends are suitable for installation
200 mm Dia
1
7500
7500
Providing & fixing of hand lever operated forged brass body full way ball valve type isolating valve
Having forged brass hard chrome plated mirror finish ball, steel handle with PVC grip, Teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete. 25 mm Dia
2
7000
3500
Providing & fixing air release valve with forged brass body full way ball valve Type isolating valve, flanges / union, suitable for sprinkler system with all necessary connections complete in all respects.
25 mm Dia
1
4500
4500
for above ground laying for hydrants and sprinkler system including transportation of materials up to the worksite, cutting the pipes to required length, edge preparation, welding, fixing / erection of pipes including specials i.e. bends, tees, reducers, flanges, expansion joints wherever required, washers, nuts, bolts etc. in proper position , anchor fastener and washer for hydrant / sprinkler piping, jointing by welding, aligning the pipe line, . Hydrostatic testing of system as specified, flushing & cleaning by water etc. complete as per drawings & direction of the Engineer-in-charge. 80 mm Dia
6
8400
1400
100 mm Dia
18
32400
1800
With terminal joints by palm or pin type cable sockets (lugs), insulating with tapes, double compression type brass and nickel plated compression glands. On surface, the cable run shall be on MS cable trey or fixed on M.S. clamps etc.of suitable size or as directed by engineer-in- charge, complete in all respects. In ground the cable shall be laid at a depth of 750 mm from ground Level including a cushion of 75 mm thick. Fine river sand alround, duly protected by bricks on sides and top including excavation and back filling of soil or laid in RCC hume pipe as called for. The armouring shall be properly connected with the earth conductor by clamps etc.
3 X 6sq.mm copper armourd cable
25
12500
500
2 X 2.5 sq.mm Copper Cable
25
2500
100
Providing & Fixing of ISI marked SS single headed 63 mm dia. Hydrant Valve, 80 mm dia flanged inlet with 63 mm female instantaneous outlet confirming to IS : 5290-1977 on the fire wet riser/down comer. including making 80 NB pipe connection with riser along with 100 mm dia dial pressure gauge of calibration 0-15 kg/sq cm, fixing the landing valves in proper positions, including supply of nuts, bolts, gaskets, caps, chains etc. testing the hydrant and completing the work in all respect as per directions of the Engineer-in-charge.
2
13600
6800
Providing & Fixing of RRL Hose pipe 63 mm dia and 15 meter long rubberized fabric lined one length including SS male - female instantaneous type coupling wounded complete conforming to IS:636-1988 type A.
RRL Hose (Rubber Reinforced Lined) Specification: IS:636 Size : 63 mm x 15 mtr (or as per client requirement) of SS Male & Female 63 mm coupling ISI marked conforming to IS:903 Binded with GI wire.
4
20800
5200
Providing and fixing 63 mm dia instantaneous patterns SS branch short pipe.
16 mm dia nozzle conforming to IS : 903 suitable for inter connection to hose pipe coupling complete as required.
2
5000
2500
Providing & Fixing of 20 mm bore and 30 meter long hose (high pressure rubber braided hose pipe as per IS:444)
Hose reel suitable for 10 kg/sqcm operating pressure for first aid fire fighting conforming to IS : 884, with 180o full swing drum, fixing brackets, shut off SS nozzle, 25 mm dia. hand lever operated isolating ball valve, connecting directly from the riser through25 mm dia. MS.pipe with sockets, elbows, nipples etc. including providing operating instructions on a metal plate and fixing it near hose reel. The system shall be complete in all respects as per drawings and directions of Engineer-in-charge.
2
19000
9500
Providing & fixing standard carbon steel fireman axe with rubber insulated handle tested to 20000 Volts.
2
1700
850
Providing and fixing standard fire hose cabinet door frame (750 x 600 mm x 250 mm ) suitable to fit in the duct made of not less than 16 SWG MS sheet having full fronted glass hinged door (5 mm thick clear glass) including necessary locking arrangement with handle as required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coats of fire red color). The door shall be fixed in the masonry wall or as required. The words "FIRE HOSE" to be painted on the box.
2
6700
3350
Providing & fixing of self glowing exit sign boards of size 10"x 6" printed made of luminescent safety rigid sheet in standard colour, photo luminescent sheet.
made of crystals consisting mainly Zinc sulphide in protectition glass like shell, green and yellow crystal luminescent (glass in dark) by action of light.
4
1000
250
Tank 5000ltrs
2
100000
50000
Assembly with 100 mm dia outlet suitable for local fire tender complete as required.
1
7500
7500
Providing & fixing of ABC Type Fire Extinguishers.4kg
Features: It is very useful for extinguishing common types of fires which generally originate in workplaces or homes due to some accident or short circuit. They are highly effective against the fires caused by electrical short circuit as the ammonium phosphate contained in it is a bad conductor of electricity and hence eliminates the changes of electrocution. Compared to other ordinary fire extinguishers, they are effective when it comes to extinguishing fires by greasy materials like petroleum. Water fails to extinguish fires caused by fuels. The ABC Type fire extinguishers are far better than others as they are suitable for extinguishing Type A, Type B and Type C fires where as others can extinguish only one type of fire.
10
22000
2200
Providing & Fixing of Carbon Dioxide(CO2) Type Fire Extinguishers 4.5kg
Features: Carbon dioxide extinguishers manufactured by us have quick flame suppression properties. These fire extinguishers are suitable for handling fires which involves inflammable liquids such as gasoline, oil, paints, varnishes and natural gases. These extinguishers have been effective used for extinguishing fires in machines. It is due to the fact, that these cut the supply of oxygen faster.
2
13000
6500
Providing & Fixing of Mechanical Foam Type Fire Extinguishers 50kg.
Supply of Mechanical Foam.
1
18500
18500
Providing & Fixing of Carbon Dioxide(CO2) Type Fire Extinguishers 22.5kg
Features: Carbon dioxide extinguishers manufactured by us have quick flame suppression properties. These fire extinguishers are suitable for handling fires which involves inflammable liquids such as gasoline, oil, paints, varnishes and natural gases. These extinguishers have been effective used for extinguishing fires in machines. It is due to the fact, that these cut the supply of oxygen faster.
1
35000
35000
Automation Electrical Control System
1
1800000
1800000
SMART TB HOSPITAL
(PART-A) CIVIL WORK
EARTH WORK
Excavation in Foundation in ordinary soil (Loam clay, or sand) including lift upto 1.5 metre (5 fts.) and lead upto 30 m (100 fts) & including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sidrs of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer- in-charge upto a distance of 30 m. (100 fts) from the foundation trenches.(Rate is Including Royality) Ref No.251
472
70800
150
Earth work in Cutting or Filiing in ordinary soil, excavation to be in the form of regular pits not exceeding 1/2 metre (20") in depth and earthwork in embankment to be in 20 cm(8") layers, including ramming & dressing the surface to required levels and slopes and also including 1.5 metre (Sfts) lifts and 30 m. (100’) lead. The earth from cutting to be used in making filling or to be deposited as spoil banks within 30 metres (100 fts) distance as directed by Engineer-in- charge. (Rate is Including Royality) Ref No.253
482
50610
105
Sand filling In plinth including suppty of necessary quantity of sand from a distance not exceeding 8 km.(5 miles) from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. (Rate is Including Royality) Ref No.255
139
276610
1990
Supplying chemical emulsion in sealed containers including delivery as specified. Ref No.1
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
2028
395460
195
CONCRETE WORK
Concrete with 4 cm(1.5") gauge brick ballast fine local sand of
1.25 Fineness modulous and cement in Proportion of 12:6:1 in
foundation and under floors including supply of all materials labour and T&P etc. required for proper completion of the work Ref No.273
As in item (273) above but in the_proportion of 10:5:1 Ref No.274
74
500240
6760
Cast cement concrete door sills, chaukhats boundry posts, shelves and similar small work with cement, approved coarse sand and 2 cm. (314") gauge approved stone ballast
in the proportion of 1 : 2 :4 , excluding supply of
reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire, and including the cost of binding wire, moulds and all other materials, labour and T&P etc required for proper Completion of the work. Ref No.282
1.61
11012
6840
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.dsr-4.17
64
38951
608.62
Thermo-Mechanically Treated bars of grade Fe-500D or more.dsr-5.22.6
45681
3656307
80.04
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.dsr-5.3
86
4968
57.77
R.C.0 work with cement approved coarse sand and 2 cm. ,(3/4") gauge approved stone ballast in the proportion of
11:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and (binding the same with 24 B.W.G.G.I binding wire and
lincluding necessary centering and shuttering etc. and also including supply of all materials, labour& T&P etc . required forproper completion of the work. Binding w ire cost being
_included in the item. Ref No.283(1)
As in item 283(1) above but in RCC at foundation and footing with 4 cm 1.5" gauge approved stone ballast Ref No.287(1)
105.94
740520
6990
As in item 283(1) above but in RCC T beam and slab foofs and RCC Columns Ref No.288(1)
224.99
1991161
8850
BRICK WORK
First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T & P etc required for proper completion of the work Ref No.303
Cement mortar 1:6 (1 cement : 6 fine sand)
77.07
469356
6090
As in item (301 to 304) above but in superstructure. Including necessary cutting and moulding of bricks as requiered and also including honey comb brick work, thickness of wall not to be less than 1.5 brick thick. Add extra labour to above item no. 301 to 304. Ref No.309
Cement mortar 1:6 (1 cement : 6 fine sand)
307.13
1962560
6390
As in item (309) above but for wall of half brick (4 1/2") thick. Add for extra labour over item No. 310. Ref No.310(a)
Cement mortar 1:6 (1 cement :6 fine sand)
103.52
674950
6520
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.dsr-6.15
103.52
7990
77.19
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).dsr-6.44
85
4234
49.82
MARBLE WORK
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.dsr-8.2
Granite of any colour and shadedsr-8.2.2
Area of slab over 0.50 sqmdsr-8.2.2.2
8.78
34691
3951.21
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.dsr-8.3
Granite workdsr-8.3.2
14.64
5474
373.97
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.dsr-8.4
14.64
6216
424.6
WOOD WORK & PVC WORK
Additional cost for fixing glass panes with C.P. Teak wood beading and felt as directed by Engieer-in-charge Instead of putty and brad including cost of all materials, labour and T & P
etc. required for proper completion of the work Ref No.410
37.19
8181
220
As in item 470 but of C P. Teak decorative type (one side only) and commercial lipping approved ply wood flush shutters 4 cm
(1 /2") thick. As in item 470 but of C P. Teak decorative type (one side only) and commercial lipping approved ply wood flush shutters 4 cm. (1 1/2") thick. Ref No.477
96.84
454179
4690
As in item 478 but with Teak lipping single leaf door. Add extra to item 478 Ref No.479
96.84
10652
110
Supply and fixing of 4 cm (1 1/2") thick C. P. Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5 mm. or 2 mm. or 1.5 mm.(1/10 or 1/12 or 1/6 inch) mesh or any other size with necessary beading, including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinges bolts, locks, handles, spring and/or other fittings but excluding their supply and including two coats of black Japan on all iron fittings, if necessary. (Fittings with necessary screws to be supplied departmentally). Ref No.450
8.64
37324
4320
Supply of M.S. Grill of a approved quality and drawing made of flat iron not bigger then 20x4 mm size including supply of materials, fabrication, labour, T&P and also one coat of red oxide paint complete in all respect as per direction of Engineer-in- charge for proper completion of work at site. Ref No.3
11.74
103077
8780
Supplying and fixing galvanised Mosquitos proof,heavy quality Iron wire gauge or expanded metal ef heavy quality over windows and including supply and fixing of C. P. Teak wood battens 8 cm X 1 cm (3"x3/8") and including supply of necessary screws, all materials, labour and T&P etc. required for proper completion of the work, Ref No.455
51.04
39811
780
STEEL WORK
Providing and fixing 1 mm. thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6 mm. (1 1/2"x1 1/2"x1/4") angle iron, 3.15 mm. (1/8") gusset plates at the junctions & corners, hooks at top, 25 mm. (1"), dia. pulleys at bottom, 40 X 40 x 6 mm.(1 1/2"x1 1/2"x1/4") angles & T iron guides at top & bottom respectively includiug locking arrangement with handles, etc. complete and applying one priming coat of approved lead paint. Ref No.519
4.2
12012
2860
Supply of Approved M.S. Z-section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt, hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work Ref No.1
20.4
201552
9880
Supply of M.S. Angle iron door, windows ventilation frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and recetting where necessary and also including supply of all material, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work. Ref No.2
8.6
80238
9330
Mild steel or iron work of small Sizes and Sections such as holding down bolts, hold fasts, tie, rods, gratings etc. (when not included in an over all rates) wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work. Ref No.502
0.72
7344
10200
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :dsr-10.3
4.0 mm thick glass panesdsr-10.30.1
37.19
31222
839.55
FLOORING
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : Ref No.14.43
20 mm thick.
22
20900
950
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. Ref No.14.43
54.23
51518
950
Supply and fixing 5 mm thick China white glazed tiles So in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work. (size of tiles upto 200 x 300 mm) Ref No.628
149.2
141740
950
Supply and fixing 5 mm thick China white glazed tiles So in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work. (size of tiles upto 200 x 300 mm) Ref No.628
39.58
37601
950
Providing & Laying of 8 to 10 mm thick ivory or light Sqm shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work. Ref No.14.43
Size of Tile 600x600 mm
731.89
1284466
1755
Providing & Laying of 8 to 10 mm thick ivory or light Sqm shade Vitrified tiles of 600 mm X 600 mm size in flooring or skirting laid with 1:3 cement mortar (1 cement: 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T& P required for proper completion of work.New item no. 2
Size of Tile 600x600 mm
73.19
134815
1842
ROOFING
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.dsr-12.22
4
952
238.04
FINISHING
12 mm Cement plaster in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extral for mixing any additive Ref No.17.58
1:3 (1 cement: 3 coarse sand)
1855.42
339541
183
15 mm Cement plaster in single coat on rough side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80 mm. In girth and finished even and smooth. Ref No.17.59
1:3 (1 cement: 3 coarse sand)
1291.94
298438
231
6mm cement plaster of mixdsr-13.16
1:3 (1 cement : 3 fine sand) dsr-13.16.1
859.3
180341
209.87
White washing one supply of all Sqm.materials,labour and T&P etc. required for proper completion of the work. Ref No.671
As in item No. 671 above but 3 coats white washing 2 coats as per item 672. Ref No.673
859.3
14436
16.8
One priming coat & one coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. Ref No.649
1855.42
87204
47
Finishing walls with water proofing cement paint of Sqm approved make and quality on new work with two coat to give to give an even shade. Including supply of all material, labour and T&P etc. required for proper completion of the work. Ref No.660
1291.94
73640
57
Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the 1.S.I.No. 103 1950 Ref No.641
Primer Wood Work
242.78
16509
68
Primer Steel Work
168.91
11485
68
Painting roofs or other iron work in large area with one coat of ready mixed paint priming one coat of approved paint (British ANTISOL) including supply of all materials, labour & T&P etc. required for proper completion of the work. Paint to be used should confirm LSI.No. 103-1950. Cost for area of 650 Sft. Priming Coat Ref No.644
368.5
21004
57
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :dsr-13.65
Two or more coats on new workdsr-13.65.1
5.97
613
102.77
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dsr-13.80
3147.36
348035
110.58
WATER PROOFING
Providing & Laying "brick bat coba" 100 mm thick laid with M-S 150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight & Including supply of all materials labour T&P etc required for proper completion of worksNew item-1
500
538000
1076
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:dsr-22.3
(i) Iist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/ sqm).
15.72
10867
691.29
Supply & filling of cinder in sunken portion of building including breaking into required sizes including supply of all material, labour, T&P required sizes including supply of al material, labour. T&P required for proper completion of work
2.19
3536
1615
(PART-B) PLUMBING WORK
EARTH WORK
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. ref no. 2.8
All kinds of soil. ref no. 2.8.1
25
5426
217.05
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : ref no. 2.1
All kinds of soil ref no. 2.10.1
Pipes, cables etc, not exceeding 80 mm dia. ref no. 2.10.1.1
25
4834
193.36
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia ref no. 2.10.1.2
40
12631
315.79
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ref no. 2.25
10
1921
192.15
ROOFING
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. ref no. 12.41
110 mm diameter ref no. 12.41.2
125
30242
241.94
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. ref no. 12.42
Coupler ref no. 12.42.1
110 mm ref no. 12.42.1.2
3
272
90.76
Bend 87.5° ref no. 12.42.5
110 mm bend ref no. 12.42.5.2
3
299
99.88
Shoe (Plain) ref no. 12.42.6
110 mm Shoe ref no. 12.42.6.2
3
263
87.74
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. ref no. 12.43
110 mm ref no. 12.43.2
6
1405
234.19
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. ref no. 12.44
16
579
36.25
SANITARY INSTALLATIONS
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ref no. 17.3
W.C. pan with ISI marked black solid plastic seat and lid ref no. 17.3.2
17
87824
5166.13
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively. ref no. 17.23
4
4183
1045.93
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: ref no. 17.7
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap ref no. 17.7.4
17
35135
2066.77
Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : ref no. 17.1
Kitchen sink with drain board ref no. 17.10.1
510x1040 mm bowl depth 250 mm ref no. 17.10.1.1
1
4546
4546.35
Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. ref no. 17.16
17
2151
126.55
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. ref no. 17.31
17
18151
1067.76
Providing and fixing toilet paper holder : ref no. 17. 34
Vitreous china ref no. 17.34.2
17
5955
350.33
Providing and fixing soil, waste and vent pipes : ref no. 17. 35
100 mm dia. ref no. 17.35.1
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 ref no. 17.35.1.2
10
8152
815.22
75mm diameter ref no. 17.35.2
Centrifugally cast (spun) iron socketed pipe as per IS: 3989 ref no. 17.35.2.2
65
51253
788.52
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : ref no. 17. 37
For 100 mm dia. pipe ref no. 17.37.1
35
8168
233.39
For 75 mm dia. pipe ref no. 17.37.2
2
460
230.36
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. ref no. 17. 38
100 mm ref no. 17.38.1
Sand cast iron S&S as per IS - 3989 ref no. 17.38.1.2
18
8139
452.18
75 mm ref no. 17.38.2
Sand cast iron S&S as per IS- 3989 ref no. 17.38.2.2
2
686
343.07
Providing and fixing plain bend of required degree. ref no. 17. 39
100 mm ref no. 17.39.1
Sand cast iron S&S as per IS : 3989 ref no. 17.39.1.2
18
5989
332.74
75 mm ref no. 17.39.2
Sand cast iron S&S as per IS - 3989 ref no. 17.39.2.2
2
451
225.64
Providing and fixing heel rest sanitary bend ref no. 17. 40
100 mm dia ref no. 17.40.1
Sand cast iron S&S as per IS - 3989 ref no. 17.40.1.2
4
1330
332.74
75 mm dia ref no. 17.40.2
Sand cast iron S&S as per IS - 3989 ref no. 17.40.2.2
1
306
306.64
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. ref no. 17. 43
100x100x100mm ref no. 17.43.1
Sand cast iron S&S as per IS - 3989 ref no. 17.43.1.2
9
4980
553.42
75x75x75mm ref no. 17.43.1
Sand cast iron S&S as per IS - 3989 ref no. 17.43.2.2
1
434
434.17
Providing and fixing single equal plain junction of required degree ref no. 17. 44
75x75x75mm ref no. 17.44.2
Sand cast iron S&S as per IS - 3989 ref no. 17.44.2.2
1
377
377.5
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : ref no. 17. 55
100 mm ref no. 17.55.1
Sand cast iron S&S as per IS - 3989 ref no. 17.55.1.2
10
4623
462.32
75 mm ref no. 17.55.2
Sand cast iron S&S as per IS - 3989 ref no. 17.55.2.2
2
686
343.07
Providing and fixing terminal guard : ref no. 17. 56
100 mm ref no. 17.56.1
Sand cast iron S&S as per IS - 3989 ref no. 17.56.1.2
9
2994
332.74
75 mm ref no. 17.56.2
Sand cast iron S&S as per IS - 3989 ref no. 17.56.2.2
1
235
235.74
Providing and fixing collar : ref no. 17. 57
100 mm ref no. 17.57.1
Sand cast iron S&S as per IS - 3989 ref no. 17.57.1.2
20
6654
332.74
Sand cast iron S&S as per IS - 3989 ref no. 17.57.2.2
1
205
205.4
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : ref no. 17. 58
100 mm ref no. 17.58.1
25
10397
415.9
75 mm ref no. 17.58.2
20
7058
352.91
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : ref no. 17. 59
100 mm ref no. 17.59.1
9
876
97.35
75 mm ref no. 17.59.2
1
60
60.61
Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : ref no. 17.61
100 mm dia ref no. 17.61.1
30
13976
465.87
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : ref no. 17.65
75 mm diameter pipe ref no. 17.65.2
10
400
40.03
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. ref no. 17.69
Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms ref no. 17.69.2
21
1743
83.01
Providing and fixing PTMT Bottle Trap for Wash basin and sink. ref no. 17.7
Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms ref no. 17.70.1
17
4181
245.99
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. ref no. 17. 71
17
1881
110.7
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. ref no. 17.73
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. ref no. 17.73.2
17
7722
454.26
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : ref no. 17.1
Kitchen sink with drain board ref no. 17.10.1
510x1040 mm bowl depth 250 mm ref no. 17.10.1.1
1
4546
4546.35
Providing and fixing 8mm dia C.P / S.S Jet with flexible tube upto 1 metre long with S.S triangular plate to Eureopean type W.C of quality and make as approved by engineer-in-charge. ref no. 17.16A
2
453
226.51
External work
Providing and fixing G.I. pipes complete with G.I. fittings including trenching & refilling. ref no. 18.12
32mm dia nominal bore ref no. 18.12.4
30
10389
346.32
40mm dia nominal bore ref no. 18.12.5
30
12674
422.48
WATER SUPPLY
Internal work - Exposed on wall
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ref no. 18.7
20 mm nominal outer dia Pipes ref no. 18.7.2
25
6149
245.99
25 mm nominal outer dia Pipes ref no. 18.7.3
30
9274
309.14
32 mm nominal outer dia Pipes ref no. 18.7.4
20
7581
379.05
40 mm nominal outer dia Pipes ref no. 18.7.5
40
20410
510.25
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. ref no. 18.8
Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes ref no. 18.8.1
20
6675
333.8
20 mm nominal outer dia Pipes ref no. 18.8.2
60
23324
388.74
25 mm nominal outer dia Pipes ref no. 18.8.3
30
14211
473.7
32 mm nominal outer dia Pipes ref no. 18.8.4
25
13482
539.31
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : ref no. 18.13
25 to 40 mm nominal bore ref no. 18.13.1
2
1145
572.86
Providing and fixing brass stop cock of approved quality : ref no. 18.16
15 mm nominal bore ref no. 18.16.1
2
459
229.91
20 mm nominal bore ref no. 18.16.2
16
3970
248.14
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : ref no. 18.17
25mm nominal bore ref no. 18.17.1
4
1611
402.81
32mm nominal bore ref no. 18.17.2
4
1785
446.36
40mm nominal bore ref no. 18.17.3
10
5351
535.19
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : ref no. 18.18
25 mm nominal bore ref no. 18.18.3
2
604
302.02
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : ref no. 18. 20
25 mm nominal bore ref no. 18.20.3
2
676
338.23
Providing and fixing uplasticised PVC connection pipe with brass unions : ref no. 18.21
45 cm length ref no. 18.21.2
15 mm nominal bore ref no. 18.21.2.1
8
515
64.47
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : ref no. 18.22
100 mm diameter ref no. 18.22.1
5
629
125.87
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. ref no. 18. 48
Rectangular tank ref no. 18. 48B
10000
73389
7.34
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : ref no. 18.49
15 mm nominal bore ref no. 18.49.1
15
4928
328.54
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. ref no. 18.51
15 mm nominal bore ref no. 18.51.1
15
8040
536.02
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. ref no. 18.52
15 mm nominal bore. ref no. 18.52.1
4
1800
450.03
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 ref no. 18. 53
15 mm nominal bore ref no. 18.53.1
20
7571
378.59
Providing and fixing PTMT grating of approved quality and colour. ref no. 18.58
Circular type. ref no. 18.58.1
100 mm nominal dia. ref no. 18.58.1.1
25
627
25.12
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. ref no. 18. 77
15
4280
285.34
SEWARAGE & DRAINAGE
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : ref no. 19.1
100 mm diameter ref no. 19.1.1
10
2843
284.31
150 mm diameter ref no. 19.1.2
30
13424
447.49
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : ref no. 19. 2
100 mm diameter S.W. pipe ref no. 19.2.1
10
6775
677.58
150 mm diameter S.W. pipe ref no. 19.2.2
30
24859
828.65
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70
kg as per standard design: ref no. 19.4
180 x 150 mm size P type ref no. 19.4.3
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ref no. 19.4.3.1
13
24925
1917.37
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : ref no. 19.7
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : ref no. 19.7.1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ref no. 19.7.1.1
4
35372
8843.14
Extra for depth for manholes :
Size 90x80 cm ref no. 19.8.1
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ref no. 19.8.1.1
2
12299
6149.7
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. ref no. 19. 16
10
3685
368.57
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : ref no. 19.21
For pipes 100 to 250 mm diameter ref no. 19.21.1
2
1034
517.33
Providing, laying and jointing non pressure NP2 class (light duty)RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : ref no. 19.6
150 mm dia RCC pipe ref no. 19.6.2
10
3731
373.11
250 mm dia RCC pipe ref no. 19.6.3
80
49101
613.76
(PART-C) FIRE FIGHTING
Sub-Head (Fire Pumps & Accessories) A
Supply, Erection, testing & Commissioning of electric motor driven automatic pump set consisting of the following as per specifications: (i) Horizontal mounted centrifugal type single stag fire pump for building pressure loss due to any leakage in the system and capable to deliver approx. 900 LPM against a total head of 40 Mtr. having cast iron body, bronze impeller , stainless steel shaft . (ii) Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 Volt (+,- 10%) 3 Phase 50 Hz. AC Supply of suitable capacity for the above pump with Synchronous speed of 2900 rpm confirming to IS:325.(iii) Common base plate for mounting pump and motor fabricated of suitable MS channel and coupling, guard etc.
900LPM 40 Mtr. Head
1
48000
48000
Design, manufacture, supply, storing, inspection, handling, assembling, installation in correct alignment, position, affecting proper connections, testing and commissioning of 14 SWG CRCA sheet steel fabricated cubical type Electrical Control Panel for fire fighting pumps floor mounting, dust & vermin proof, front operated construction, enclosure class - IP 52. Complete with top/bottom removable gland plates, as required, double compression type cable glands, earth bus, hinged and lockable doors. Complete with all inter connections small wiring by min. 2.5 sq. mm. copper wires, ckt labels, The Copper Bus Bar shall be of suitable length, 200 Amp., 3 phase 50 Hz TPN, electrolytic copper. The panel shall be provided with interlocking arrangement between electric motor driven and diesel engine driven pumps. Provisions shall be made for providing potential free contacts to all pump starters for connection to building automation system / Fire alarm control panel. The fault withstanding capacity of panel shall be 35 KA rms for 1 sec.Following Fire fighting pumps shall have to be controlled - Incomer : 160 AMP FP MCCB with flush mounting square CT operated ammeter with selector switch, Voltmeter with selector switch, protective fuses and phase indicating lamps. Outgoings : 1 nos. 100 AMP TPN MCCB with star delta starter suitable for sprinkler pump with CT operated ammeter with selector switch and indication lamps for "On" "Off" and "Trip" mounted on the cubicle door. 2 nos. 63 AMP TP MCCB with star delta starter suitable for jockey pump with CT operated ammeter with selector switch and indication lamps for "On" "Off" and "Trip" mounted on the cubicle door.
1
18000
18000
Providing & fixing double flanged vertical air Pressure vessel fabricated form 8mm M.S. Plate with dished ends from 8mm M.S. Plate out side with one coat at primer and two coat of synthetic enamel paint of approved shade complete with approved quality to operate at drop of pressure automatically at required pressure setting. Recommended Dia 150 MM Working Pressure – 7 K.g/Sqcm. Test Pressure – 10 Kg/Sqcm
1
16000
16000
Providing, fixing of Pressure Gauge of required capacity as per fire fighting nobs.
Pressure Test Gauge connects to any ¾ “ garden hose connection and is just the thing for quickly checking residential or commercial water systems for pressure problems. The PG150 Water System Pressure Test Gauge's re-settable maximum pressure hand stays at the water system’s highest pressure point during the test period. The Water System Pressure Test Gauges provide a quick indicator of any pressure spikes that might have occurred.
1
2800
2800
Providing and fixing, C.I. double flanged horizontal / vertical type Check valve NON return valve (NRV) including nuts, bolts 3 mm thick rubber insertions compete to IS : 5312 Part – 1 swing type class PN : 1-6.
Providing, fixing of Pressure switch to operate of fire pump automatically on/off.
Pressure switch is a form of switch that makes electrical contact when a certain set pressure has been reached on its input. This is used to provide on/off switching from a pneumatic or hydraulic source. The switch may be designed to make contact either on pressure rise or on pressure fall.
1
3200
3200
100 mm Dia
1
5500
5500
Providing & fixing of butter fly valve suitable for pressure 15 kg/cm2 with flanges. Nut bolts and gasket complete as required.(PN : 1-6 type)
Butterfly valve is a type of flow control device, typically used to regulate a fluid flowing through a section of pipe A flat circular plate is positioned in the center of the pipe. The plate has a rod through it connected to an actuator on the outside of the valve. Rotating the actuator turns the plate either parallel or perpendicular to the flow. Unlike a ball valve, the plate is always present within the flow, therefore a pressure drop is always induced in the flow regardless of valve position. butterfly valve is from a family of valves called quarter-turn valves. The "butterfly" is a metal disc mounted on a rod. When the valve is closed, the disc is turned so that it completely blocks off the passageway. When the valve is fully open, the disc is rotated a quarter turn so that it allows an almost unrestricted passage of the process fluid. The valve may also be opened incrementally to regulate flow.
100 mm Dia
2
11600
5800
Providing & fixing of CI 'Y' type strainer flanged with SS 304 perforated screen.
“Y” type including, nuts, bolts and 3mm thick rubber insertion complete.“Y” Strainer is rated for 640 psi (44.1 Bar) at 100°F (38°C). The “Y” Strainer provides economical strainer protection for piping equipment such as pumps, meters, valves, compressors, traps and similar equipment. The inlet and outlet ends are suitable for installation
200 mm Dia
1
7500
7500
Providing & fixing of hand lever operated forged brass body full way ball valve type isolating valve
Having forged brass hard chrome plated mirror finish ball, steel handle with PVC grip, Teflon seat, screwed ends tested to a pressure of 15 kg/sqcm complete. 25 mm Dia
2
7000
3500
Providing & fixing air release valve with forged brass body full way ball valve Type isolating valve, flanges / union, suitable for sprinkler system with all necessary connections complete in all respects.
25 mm Dia
1
4500
4500
for above ground laying for hydrants and sprinkler system including transportation of materials up to the worksite, cutting the pipes to required length, edge preparation, welding, fixing / erection of pipes including specials i.e. bends, tees, reducers, flanges, expansion joints wherever required, washers, nuts, bolts etc. in proper position , anchor fastener and washer for hydrant / sprinkler piping, jointing by welding, aligning the pipe line, . Hydrostatic testing of system as specified, flushing & cleaning by water etc. complete as per drawings & direction of the Engineer-in-charge. 80 mm Dia
6
8400
1400
100 mm Dia
18
32400
1800
With terminal joints by palm or pin type cable sockets (lugs), insulating with tapes, double compression type brass and nickel plated compression glands. On surface, the cable run shall be on MS cable trey or fixed on M.S. clamps etc.of suitable size or as directed by engineer-in- charge, complete in all respects. In ground the cable shall be laid at a depth of 750 mm from ground Level including a cushion of 75 mm thick. Fine river sand alround, duly protected by bricks on sides and top including excavation and back filling of soil or laid in RCC hume pipe as called for. The armouring shall be properly connected with the earth conductor by clamps etc.
3 X 6sq.mm copper armourd cable
25
12500
500
2 X 2.5 sq.mm Copper Cable
25
2500
100
Providing & Fixing of ISI marked SS single headed 63 mm dia. Hydrant Valve, 80 mm dia flanged inlet with 63 mm female instantaneous outlet confirming to IS : 5290-1977 on the fire wet riser/down comer. including making 80 NB pipe connection with riser along with 100 mm dia dial pressure gauge of calibration 0-15 kg/sq cm, fixing the landing valves in proper positions, including supply of nuts, bolts, gaskets, caps, chains etc. testing the hydrant and completing the work in all respect as per directions of the Engineer-in-charge.
2
13600
6800
Providing & Fixing of RRL Hose pipe 63 mm dia and 15 meter long rubberized fabric lined one length including SS male - female instantaneous type coupling wounded complete conforming to IS:636-1988 type A.
RRL Hose (Rubber Reinforced Lined) Specification: IS:636 Size : 63 mm x 15 mtr (or as per client requirement) of SS Male & Female 63 mm coupling ISI marked conforming to IS:903 Binded with GI wire.
4
20800
5200
Providing and fixing 63 mm dia instantaneous patterns SS branch short pipe.
16 mm dia nozzle conforming to IS : 903 suitable for inter connection to hose pipe coupling complete as required.
2
5000
2500
Providing & Fixing of 20 mm bore and 30 meter long hose (high pressure rubber braided hose pipe as per IS:444)
Hose reel suitable for 10 kg/sqcm operating pressure for first aid fire fighting conforming to IS : 884, with 180o full swing drum, fixing brackets, shut off SS nozzle, 25 mm dia. hand lever operated isolating ball valve, connecting directly from the riser through25 mm dia. MS.pipe with sockets, elbows, nipples etc. including providing operating instructions on a metal plate and fixing it near hose reel. The system shall be complete in all respects as per drawings and directions of Engineer-in-charge.
2
19000
9500
Providing & fixing standard carbon steel fireman axe with rubber insulated handle tested to 20000 Volts.
2
1700
850
Providing and fixing standard fire hose cabinet door frame (750 x 600 mm x 250 mm ) suitable to fit in the duct made of not less than 16 SWG MS sheet having full fronted glass hinged door (5 mm thick clear glass) including necessary locking arrangement with handle as required as per drawings, including brackets for mounting accessories, painting (one coat primer and two coats of fire red color). The door shall be fixed in the masonry wall or as required. The words "FIRE HOSE" to be painted on the box.
2
6700
3350
Providing & fixing of self glowing exit sign boards of size 10"x 6" printed made of luminescent safety rigid sheet in standard colour, photo luminescent sheet.
made of crystals consisting mainly Zinc sulphide in protectition glass like shell, green and yellow crystal luminescent (glass in dark) by action of light.
4
1000
250
Tank 5000ltrs
2
100000
50000
Assembly with 100 mm dia outlet suitable for local fire tender complete as required.
1
7500
7500
Providing & fixing of ABC Type Fire Extinguishers.4kg
Features: It is very useful for extinguishing common types of fires which generally originate in workplaces or homes due to some accident or short circuit. They are highly effective against the fires caused by electrical short circuit as the ammonium phosphate contained in it is a bad conductor of electricity and hence eliminates the changes of electrocution. Compared to other ordinary fire extinguishers, they are effective when it comes to extinguishing fires by greasy materials like petroleum. Water fails to extinguish fires caused by fuels. The ABC Type fire extinguishers are far better than others as they are suitable for extinguishing Type A, Type B and Type C fires where as others can extinguish only one type of fire.
10
22000
2200
Providing & Fixing of Carbon Dioxide(CO2) Type Fire Extinguishers 4.5kg
Features: Carbon dioxide extinguishers manufactured by us have quick flame suppression properties. These fire extinguishers are suitable for handling fires which involves inflammable liquids such as gasoline, oil, paints, varnishes and natural gases. These extinguishers have been effective used for extinguishing fires in machines. It is due to the fact, that these cut the supply of oxygen faster.
2
13000
6500
Providing & Fixing of Mechanical Foam Type Fire Extinguishers 50kg.
Supply of Mechanical Foam.
1
18500
18500
Providing & Fixing of Carbon Dioxide(CO2) Type Fire Extinguishers 22.5kg
Features: Carbon dioxide extinguishers manufactured by us have quick flame suppression properties. These fire extinguishers are suitable for handling fires which involves inflammable liquids such as gasoline, oil, paints, varnishes and natural gases. These extinguishers have been effective used for extinguishing fires in machines. It is due to the fact, that these cut the supply of oxygen faster.
1
35000
35000
(PART-D) ELECTRICAL WORK
WIRING IN STEEL AND PVC CONDUIT
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.DSR 2022 Sl No.1.3
Group ASl No.1.3.1
38
39320
1034.75
Group BSl No.1.3.2
62
77026
1242.37
Group CSl No.1.3.3
105
162216
1544.92
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.DSR 2022 Sl No.1.5
3260
1196257
366.95
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.DSR 2022 Sl No.1.7
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wireSl No.1.7.2
2290
716105
312.71
4 X 6 sq. mm + 2 X 6 sq. mm earth wireSl No.1.7.9
100
78305
783.05
4 X 10 sq. mm + 2 X 6 sq. mm earth wireSl No.1.7.10
100
88226
882.26
4 X 16 sq. mm + 2 X 6 sq. mm earth wireSl No.1.7.11
100
139407
1394.07
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.DSR 2022 Sl No.1.18
2 Pair Sl No.1.18.2
120
3864
32.2
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.DSR 2022 Sl No.1.19
60
2389
39.83
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.DSR 2022 Sl No.1.2
25 mm1.20.2
174
37749
216.95
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.DSR 2022 Sl No.1.24
5/6 A switchSl No.1.24.1
374
32646
87.29
15/16 A switchSl No.1.24.3
90
11898
132.2
3 pin 5/6 A socket outletSl No.1.24.4
200
20678
103.39
6 pin 15/16 A socket outletSl No.1.24.5
90
15025
166.95
Telephone socket outletSl No.1.24.6
6
752
125.42
TV antenna socket outletSl No.1.24.7
3
376
125.42
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.DSR 2022 Sl No.1.25
13
4065
312.71
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.DSR 2022 Sl No.1.26
16
542
33.9
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.DSR 2022 Sl No.1.27
1 or 2 Module (75mmX75mm)Sl No.1.27.1
63
15910
252.54
3 Module (100mmX75mm)Sl No.1.27.2
180
49881
277.12
4 Module (125mmX75mm)Sl No.1.27.3
11
3197
290.68
6 Module (200mmX75mm)Sl No.1.27.4
26
8857
340.68
8 Module (125mmX125mm)Sl No.1.27.5
27
10388
384.75
12 Module (200mmX150mm)Sl No.1.27.6
3
1390
463.56
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.DSR 2022 Sl No.1.33
17
1253
73.73
Installation,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.DSR 2022 Sl No.1.35
304
30658
100.85
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.DSR 2022 Sl No.1.45
13
3734
287.29
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.DSR 2022 Sl No.1.49
368
17778
48.31
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.DSR 2022 Sl No.1.5
Upto 450 mm sweepSl No.1.50.1
17
6483
381.36
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.DSR 2022 Sl No.1.51
17
2982
175.42
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.DSR 2022 Sl No.1.54
Group ASl No.1.54.1
34
22387
658.47
Group BSl No.1.54.2
46
36566
794.92
Group CSl No.1.54.3
81
75096
927.12
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.DSR 2022 Sl No.1.57
8
4928
616.1
Telephone cable, 0.5 mm solid annealed cu., jelly filledNSRNSR
Supply installation, testing and commissioning of 0.5 mm size solid annealed copper, jelly filled telephone cables, polythene insulated, petroleum jelly filled with poly-al laminate moisture barrier, polythene sheathed, unarmoured polythene jacketed telephone cables as per DOT specifications of following sizes
10 Pair NSR N1
100
6000
60
Telephone tag blockNSRNSR
Supply, installation testing and commissioning of telephone tag block krone connector with enclosure complete as mentioned below:NSR
10 Pair NSR N2
2
308
154
MCB DBs AND ACCESSORIES
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive ofV 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)DSR 2022 Sl No.2.5
8 way (4 + 24), Double door (For Essential Load)Sl No.2.5.2
2
17228
8614.41
12 way (4 + 36), Double doorSl No.2.5.3
4
43501
10875.42
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.DSR 2022 Sl No.2.1
Single Pole2.10.1
140
30373
216.95
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.DSR 2022 Sl No.2.11
6
66
11.02
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.DSR 2022 Sl No.2.12 63 ASl No.2.12.2
11
9638
876.27
Supplying and fixing following rating, four pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.DSR 2022 Sl No.2.13 63 ASl No.2.13.2
2
1752
876.27
100 ASl No.2.13.3
4
4159
1039.83
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.DSR 2022 Sl No.2.25
6
5311
885.29
LIGHTING FIXTURES & FANS
Supplying LED 18W Recess / Surface Mounting, CCT‐6000K, CRI70, PF0.95, Downlighter complete as required of approved make.NSR N3
161
301070
1870
Supplying LED 15W, CCT‐6000K, CRI70, PF0.95, Mirror Light complete as required of approved make.NSR N4
13
12662
974
Supplying LED 20W, CCT‐6000K, CRI70, PF0.95, Tube Light Fixture complete as required of approved make.NSR N5
32
9216
288
Supplying LED 43 W, CCT‐6000K, CRI 70, PF0.95, 2'x2' Size Panel Light Fixture complete as required of approved make.NSR N6
98
630630
6435
Supplying Star rated double ball bearing capacitor start, aluminium body & blade 1200 mm Sweep 5 Star rated ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor etc. complete as required of standard approved make.NSR N7
13
25090
1930
Supplying Star rated High Air Throw 1300 ~ 1400 RPM single phase ISI marked 400 mm sweep (1300~1400 RPM) Wall Mounted fan with adjustable speeds in 5 steps by pull chord switch, etc. complete as required of standard approved make.NSR N8
34
99076
2914
Supplying Heavy duty capacitor start, Double ball bearing 900 / 1400 RPM single phase ISI marked 300 mm sweep (900/1400 RPM) Exhaust fan, IS:2312 marked etc. complete as required of standard approved make.NSR N9
17
62798
3694
Supplying Iron and Aluminium Louver for Exhaust comple as reqyuired of approved make.NSR N10
17
8619
507
EARTHING
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.DSR 2022 Sl No.5.4
2
11307
5653.75
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)DSR 2022 Sl No.5.9
30
3268
108.96
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.DSR 2022 Sl No.5.11
5
2671
534.2
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.DSR 2022 Sl No.5.15
10
1846
184.63
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.DSR 2022 Sl No.5.16
10
431
43.14
Intercom / EPABX Systems
Supply, installation, testing and commissioning of EPABX system consisting of 8 Nos. extensions complete as required of approved make.NSR N11
1
5017
5017
Automation Electrical Control System
1
2000000
2000000
Passenger Lift for 16 Passenger @ 1088 KG
1
2085000
2085000
CC PAVER BLOCK @ 227 SQM
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. DSR-2021 Sl No. 16.68
227
192747
849.11
RCC Road @ 235 Meter
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete DSR-2021 Sl No. 2.25a
77.55
25525
329.15
Construction of RCC road including earth work preparation of sub greds supply of stone blast, laying, spreading and compacting WBM, providing and laying factory made kerb stone of M-25 providing and laying CC pavement of mix M-25 with ready mixed concrete from baching plant including steel reinforecement for RCC work complete in all respect as attached by analysis of Road DSR-2021
822.5
2246461
2731.26
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements