Jhansi Development Authority Tender

(j) 25 Sqmm 3.5 core (501-507)

(i) 16 Sqmm 4 core (501-507)

(b) 10 Sqmm 2 core (501-507)

Supply and fixing of brass nickle plated compression Gland for PVC insulated and armoured sreved sheathed underground cable including Rubber ring etc complete in all respect the armouring of the cable shall be properly Connected with the earth as per direction of E/I. (k) 35 Sqmm 4 core SI No. 503

(j) 25 Sqmm 3.5 core

(i) 16 Sqmm 4 core

(b) 10 Sqmm 2 core

Supply and fixing of Plane or Pin type Copper tin plated cable socket lugs to the cable leads, insulating with the tape and making connection etc complete in all respect as per direction of E/I SI No. 504 (f) 35 sqmm

(e) 25 Sqmm

(c) 10 Sqmm

Supply and laying of 25 mm x 3 mm. GI Strip from earth electrode directly in the ground as required complete in all respect .as per direction of E/I SI No. 716

Supply & Laying of two no 8 to 4 SWG .G.I wire as earth wire in ground as required complete in all respect .as per direction of E/I SI No. 628

Supply and fixing of Factory wire Integral LED Flood Light Luminaires with die cast alluminium housing built with driver set suitable for 170 - 200 watt. Confirming to IP 66 protection Complete in all respect. .as per direction of E/I CAT - AAA SI No. 1455

Supply and burrying of safe earthing electrode T-19 (hot dip galvanized) length upto 3000 mm, outer dia 50 mm inner dia 25 mm, terminal dia 12 mm, Outer GI pipe of 16 SWG and inner GI Pipe of 12 SWG with hot dip galvanization upto 100 micron filled with crysatalline conducting mixture having anti corrosive and conductive property with 50 Kgs Activated soil (BFC) Capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3 mm GI strip upto switch board (from apron to switch board the coat of GI strip will be extra) along with 30 cm sq CI Frame with hinged and massonary housing as approved in UPPWD and CPRI certified..as per direction of E/I SI No. 725(B)

Supply and fixing decorative 40 to 45 watt LED post Top indirect light lumanaire having pressure die cast alluminium Body and clear glass with driver set confirming to IP 65 protection Complete in all respect. .as per direction of E/I CAT - AAA SI No. 1443

Supply & Fixing of 9 mtr. GI Octagonal Pole of approved make (top dia 70 mm., bottom dia 135 mm. and base plate 12 mm. thick) having 3mm. Thikness with single arm bracket on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T & P complete in all respect as per direction of E/I SI No. 645

S/E of Factory Fabricated and wire metal clad dust and vermin proof floor mounting, MS channel based with bottom and top cable entries electrical control panel with TPN MCCB's (four pole 36 KA with thermal magnetic relays) switches complete and instrument chamber etc complete in all respect. the instrument chamber shall be seperate and shall comprise of flush type digital metering system for face to face voltage and single face voltage, current and other parameters (KVA, PF, KW etc) in each face with touch type selector switches for different readings, instrument fuses, CT etc. the panel board shall have suitable capacity electrolytic alluminium bus bars as per IS 8623 or above insulated with heat shrink sleeving and mounted on non hygroscopic Supports such as CMC/BMC Support with detachable side cover and shall be suitable for extension on sides. the MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. the job includes the grounting on the board as per direction of E/I. all Outgoings of 100 Amp and above shall have an Ammeter. the panel board shall be fabricated with CRCA sheat with a minimum thickness of 1.6 mm/2 mm. Cubical type switch board shall be of CAT - A&B only. (c) Incoming 100 Amp MCCB's -1No Outgoing 63 Amp MCCB -1 No &32 amp MCCB 2 Nos. CAT - B Panel cubical type Si No. 811

PART-B S/F of 100 mm dia B class G.I.pipe (nominal) 3 mt. length along the pole including clamps complete in all respect as per direction of E/l. DSR NO. 2018/12.39

Supplying and laying of HDPE Pipe .as per direction of E/I (2892) 90 mm Dia DSR NO. 2018

(2891) 63 mm Dia

Supply and fixing of HDPE Pipe Coupler .as per direction of E/I (2897) 90 mm Dia DSR No. 2018

(2896) 63 mm Dia