Jhansi Development Authority Tender

Dismantling existing plaster including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meter (200 feet) Si no 706

First class brick work in 1:6 cement and fine sand of 1.25 FM. mortar in Super structure and plinth including supply of all materials, labour and T & P etc. required for proper completion of the work. Si no 303

12 mm Cement plaster in 1:4 single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extra for mixing any additive. Si no 17.58 (II)

Cement concrete with 4 cm (1.5") gauge approved stone ballast, approved coarse sand and cement in the proportion of 8 : 4 : 1 including supply of all materials, labour and T & P etc. required for proper completion of the work. Si no 281

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km.(5 miles) from the site of work and including watering, dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. (Rate is Including Royality) si no 255

Providing & injecting chemical for post constructional anti termite treatment with drilling holes at junction of floor with wall & pillars, the application of chemicals shall be as per relevant I.S. Code and the rate of application of chemical shall also be as provided in the IS 6313 Part-III, including quarterly inspection and provinding required traetment for one year As per direction of E/L. As per S.I. No. 2 (Chapter - 18)

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or / and residual bitumen applied hot at 1.45, 1.20 and 1.70 kg per square metre of area respectively, second and fourth courses of roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic decimeter per sqm including preparation of surface but excluding grading, complete.As per D.S.R. No. 22.11

Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade including supply of all materials labour, tools and plants etc. required for proper completion of work.SI No.660+661

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.