Jhansi Development Authority Tender

Prime Coat Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. 502

Reflective Ralsed Pavement Markers (Cat Eye/ Road Stud) Supply and luơng of raised pavement marker with Made of Plastic body of RPIW Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Imoact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTIA D4280, The Reflective panels shall consist of number of lenses contatning single or dual prismolic cubes capable of providing total Intermal reflection of the light entring the lens lace, Lonses shall be mouled of methyl methecrylale conforming 10 ASTIA 0788 of equivalent The slop or retro-reflacting surface shall preferably be 35+/-5 degree to base and the area of each retro reflecting surface shall not be less than 13.00 sq.cin. the marker height shat not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture, epoxy vistallations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shal be immediately removed. The contractor shall submit a two year warranty for sallsfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer, In additiona two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. In case the markers are displaced, damaged, get worn out or lose their reflectivity compared to stipulated standards, the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all malenals, labour. TSP, vansportation, instalation and incidenials all complete as per diruction of the Engineer-in-Charge MORT&H Analysed Rate 804/8.35 RPM (With Sank)

Mild steel or iron work in plain work such as reinforced concrete/brick work wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured. SOR. NO. 504 (2022)