Irrigation Department Tender

Centering & shuttering for R.C.C. work including rent of shuttering material, labour and T&P etc.

1st class Brick work in 1:4 in cement and coarse sand mortar including supply of all material, labour and T&P etc. required for proper completion of work.

Mild steel/ Tor steel or iron in plain work such as reinforced concrete reinforced brick work (when not included in an over all rates) wrougth to required shape as necessary including bending for proper completion of work including all material, labour, T&P etc. For 10 mm dia

Mild steel/ Tor steel or iron in plain work such as reinforced concrete reinforced brick work (when not included in an over all rates) wrougth to required shape as necessary including bending for proper completion of work including all material, labour, T&P etc. For 12 mm dia

12mm thick Plaster with cement, coarse sand mortar in 1:4 proportion including supply of all mateiral, labour, T&P etc complete.

Wall painting with acrylic emulsion paint of approved brand & manufacture to give an even shade : two or more coats on new work ( Ist quality royal silk ,Asian ,Berger )

painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all material labour T&P etc required for proper completion of work .

providing wood work in frames of doors,windows,clerestory windows and other frames ,wrought framed and fixed in position wwith holdfast lugs or with dash fasteners of reqired dia and length second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type. Core of block board construction with frame of 1st class hard wood and well matched commercial 3ply veneering with vertical grains or cross bands and face veneers on both faces of shutters( 35 mm thick including ISI marked Stainless steel Nutt hinges with necessary)

Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge with in as distance of 60 meters (200ft)

Demolishing brick work Manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Cement concrete with cement, coarse sand and 40mm gauge approved stone ballast in the proportion of 1:4:8 including all material labour and T&P etc complete.

Cement concrete flooring 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding cost of nosing of step etc. complete. (40mm thick with 20mm nominal size stone aggregate)

Finishing wall with acrylic smooth exterior paint with silicon additive of required shade two or more code over existing surface

Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.8% and conforming to I.S. : 15622 of approved make in all colours & shade in skirting. Size of steps over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), joint with white cement & matching pigment etc. complete.

Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture), of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, ivory, Grey, Fume Red Broun, laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement and matching pigment etc. complete.

Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree at plugging them with cement mortar 1:2 (1cement :2coarse sand ) to the full depth of the hole with chlorriphos/Lindane E.C 20% with 1% concentration

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x50 mm long with 6mm dia bolts , other flange of cleat fixed to the angle hangers of 25x10x.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to with the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clips made out of 2.64 mm dia x 230mm long G.I wire at every junction including fixing perimetre channels 0.50 mm thick 27mm high having flanges of 20mm and 30mm long the perimetre of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre with 25mm long dry wall screws @ 230mm interval including fixing of gypsum board to ceiling section and perimetre channel with the help of dry screws of size 3.5 x 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered and square edes of the board with recommended jointing compound , jointing tapes , fininshing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board all as per manufacturers specification and also including the cost of making openings for light fittings , grills , diffusers cutout made with frame of perimetre channels suitably fixed all complete as per drawings specification and diection of the Engineer in Charge but the excluding of painting with 12.5 mm thick tapered edge gypsum moisture resistant board dry wall screws @ complete in all respect. and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x50 mm long with 6mm dia bolts , other flange of cleat fixed to the angle hangers of 25x10x.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to with the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm at 450 mm centre to centre shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clips made out of 2.64 mm dia x 230mm long G.I wire at every junction including fixing perimetre channels 0.50 mm thick 27mm high having flanges of 20mm and 30mm long the perimetre of ceiling fixed to wall / partition with the help of rawl plugs at 450 mm centre with 25mm long dry wall screws @ 230mm interval including fixing of gypsum board to ceiling section and perimetre channel with the help of dry screws of size 3.5 x 25 mm at 230 mm c/c including jointing and finishing to a flush finish of tapered and square edes of the board with recommended jointing compound , jointing tapes , fininshing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board all as per manufacturers specification and also including the cost of making openings for light fittings , grills , diffusers cutout made with frame of perimetre channels suitably fixed all complete as per drawings specification and diection of the Engineer in Charge but the excluding of painting with 12.5 mm thick tapered edge gypsum moisture resistant board dry wall screws @ complete in all respect.

Cement concrete with cement, coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1.5: 3 including all material labour and T&P etc complete.

Scraping old white or colour wash including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meters (200ft)

Dismantling old existing plaster including disposal of refuse as per direction of the Engineer-in-charge with in distance of 60 m.

Providing and laying white base putty 1mm thick over plaster surface ever and smooth including and T&P etc. complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately. All complete as per direction of Engineer-in-charge ( Note- Butt hinges and necessary screws shall be paid separately) 35 mm thick shutters .

Dismantling reinforced cement concrete or reinforced brick work including stacking of dismantled materials as directed by the Engineer-in-Charge with in a distance of 60mtr (200ft)

fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4 mm wide aperture with matching wood beading .

Providing and Laying of Interlocking Concrete Block Pavement having thickness 80 mm as per drawing and technical specification clause 1504.

Providing and Laying "Brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & tip ,ashed false square 30cmx30cm higher and junction and corner shall be rounded by brick ballast cement and coarse and masonry coba with top finished plaster mixed with acetic water proofing compound@ 2% weight & including S/o all material, labour, T&P etc. complete for proper completion of work (OVER ALL RATE)

Cement concrete with cement, coarse sand and Brick ballast 25mm to 40mm in the proporton of 1:4:8 including all material labour and T&P etc complete.

Providing/fixing of door closers ISI make with approved make

Supply and istalation of concrete Pannel Boundary wall ( Prestressed concrete of grade M-25 with 4 Nos of 4mm STS wire) slab of size 2100mm x 300x 50mm with fixing of same at proper position between two pillers/column with samd grade of concrete ( pre stressed with 7 Nos of STS wire) of size 2740mm x 150mm 150mm with provision of edge grove (50mm x 50mm ) on two opposite phase for holding precast slab/Pannal including all material, Labour, T&P etc also i/c carriage at site complete including contractor prof

Providing & fixing of iron gate For 4.0 M

Providing & fixing of iron gate For 2.0 M

P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes joint of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge concealed work including cutting chases & making good the wall etc For 15 mm dia

P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes joint of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge concealed work including cutting chases & making good the wall etc For 20 mm dia

P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling and testing of joints complete as per direction of Engineer in Charge external work. For 20 mm dia

P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass threaded fittings this includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling and testing of joints complete as per direction of Engineer in Charge external work. For 25 mm dia

P/F in gun metal valve with C.I. wheel of approved quality (screwed) For 20 mm dia

P/F in gun metal valve with C.I. wheel of approved quality (screwed) For 25 mm dia

P/F C.P. brass angle valve for basin mixer and gyesure points of approved quality confirming to IS 8931 15 mm nominal bore

P/F 15 mm Nominal bore size C.P. stop cocks (concealed ) of standard design and of approved made of confirming to IS 8931

P/F 15 mm CP brass long nose bib cock of approved quality confirming to IS standards & weighing not less than 810 gms

P/F 15 mm nominal bore C.P. brass bib cock of approved quality confirming to IS 8931

Providing and fixing PVC waste pipe for sink and wash basin including complete fitting. 32 mm dia

P/F in position C.P. brass towel rail complete with brackets including making chases in walls and repairing the same in 1:3 CM complete.

Fixing C.P. brass soap dish jaquar,essco,shera,hindware

P/F C.P. Jali heavy quality 100 mm dia

C.P brass waste jali for sink

C.P brass waste jali for wash basin

P/F white virtuous China water closet squatting pan Indian type Indian type .

P/F white virtuous China pedestal type ( European type/wash down type )water closet tap

P/F 8mm Dia C.P./ S.S jet with flexible tube up to 1m long with SS triangular plate to European type W.C. of quality and make as approved by Engineer in charge

Providing and fixing PVC low level flushing cistern with manually controlled device conforming to IS 7231 with all fittings and fixtures complete

P/F wash basin with C.I. bracket 15m C.P.brass pillar taps 32mm C.P. waste of standard pattern including painting of fitting and brackets, cutting and making good the wall wherever required 630x 450 mm

P/F stainless steel A ISI 304 (18/8) kitchen sink as per including 13963 with C.I. Brackets and stainless steel plug 40mm, including painting of fitting and brackets cutting and making good the walls wherever required. (510x1040) bowl depth 250mm

Proving and fixing soil, waste and vent pipes 100 mm Dia sand cast iron S & S pipe as per IS 1729

P/F square mouth S.W. gully trapclass SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg/ standard design 100x100 mm size p type with common burnt clay ( non modular ) bricks of class 150

P/F 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6mm thick hardboard ground fixed to wooden cleats with CP brass screws and washers complete

Supplying and fixing C.I. cover without frame for manholes 500 mm dia C.I. cover (medium duty) the weight of the cover to be not less than 58 kg

Over head PVC Water storage tank 500 L@ Rs9.00/lit.

providing & fixing CP brass shower rose with 15 or 20 mm inlet 100 mm Dia

shocket For 50 mm dia

shocket For 75 mm dia

Elbow band For 50 mm dia

Elbow band For 75 mm dia

T-Shocket

Electric services Wiring point for light with 1.5 Sq. mm FRLSH PVC insulated multistrained single core copper conductor cable in PVC conduit in the wall with 1.5 sqmm , copperconductor cable as earth wire drawn inside the conduit GP box, piano type switch & ceiling rose /angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all-respect as directed including matching colour wash . as per P.W.D. Electrical schedule item no. 131©

Wiring point for two ways light with 1.5 sq.mm FRLSH PVC insulated multistrained single core copper conductor cable in PVC conduit with 1.5 sqmm ,FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit with 14 SWG , copper earth continuity wire and two number two ways piano type switches & ceiling rose /angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all-respect as directed including matching colour wash as per P.W.D. Electrical schedule item No. 132c

Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 Sq. mm FRLSH PVC insulated multistrained single core copper conductor cable in PVC conduit with 1.5 sqmm ,FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit with 14 SWG , copper earth continuity wire GP box, piano type switch & ceiling rose /angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all-respect as directed including matching colour wash as per P.W.D. Electrical schedule item No. 133C

Wiring point for plug with 1.5 sq mm FRLSH PVC insulated multistrained single core copper conductor cable in PVC conduit with 1.5 sqmm ,FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit with 14 SWG , copper earth continuity wire GP box, piano type switch & socket etc. complete in all-respect as directed including matching colour wash as per P.W.D. Electrical schedule item No. 134c

Wiring point for call bell with 1.5 sqmm FRLSH PVC insulated multistrained single core copper conductor cable in PVC conduit with 1.5 sqmm ,FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit with 14 SWG , copper earth continuity wire & piano type bell push or 2 pin socket etc. complete in all-respect including matching colour wash as per P.W.D. Electrical schedule item No. 135B

Wiring point for exhaust fan 1.5 sqm FRLSH PVC insulated multistrained single core copper conductor cable in PVC conduit with 1.5 mm square F.R insulated multistrained copper conductor cable as earth wire drawn inside the conduit , GP box 15A piano type switch and ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all-respect . as per P.W.D. Electrical schedule item No. 137B

S/W of sub main with two nos 1.5 sqmm FRLSH PVC insulated 1100 v grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) pvc conduit with 1 no. 1.5 sqmm FRLSH PVC insulated 1100 v grade multistrand single core copper conductor as earth continuity wire 1312 c

S/W of sub main with two nos 2.5 sqmm FRLSH PVC insulated 1100 v grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) pvc conduit with 1 no. 1.5 sqmm FRLSH PVC insulated 1100 v grade multistrand single core copper conductor as earth continuity wire 1304 c

S/W of sub main with two nos 4.00 sqmm FRLSH PVC insulated 1100 v grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) pvc conduit with 1 no. 2.5 sqmm FRLSH PVC insulated 1100 v grade multistrand single core copper conductor as earth continuity wire drawn in conduit 216 c

Supply and burying of 600 mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3m below ground level complete with 20mm dia G.I. Pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe upto switch board (form apron to switch board the cost of G.I.Pipe and G.I. wire will be extra) 30 cm square C.I. frame with hinged cover, masonry housing, alternate layer of charcoal/ coke & salt at least 150 mm thick alround etc. as per direction of engineer-in-charges complete in all respect ( complete rate) as per P.W.D. electrical schedule item No. 702.

S/F of 63 A 415V metal and clad T.P.N. rewirable type switch fuse unit on angle iron bracket frame, complete in all respect as per P.W.D. Electrical schedule item No. 316 catB

supply & fixing of LED tubelight batten fitting suitable for upto 1x22 watt LED tubelight fitting including tube on surface complete in all respect

S/F of call bell of approved make on polished MDFEG board including making connections etc. complete in all respect as per P.W.D. 1101

S/F fixing of fan hook fabricated from M.S. rod for ceiling fans (Complete rate) as per P.W.D.1123.

supply & fixing of electronic fan regulator 120-280 v ISI marked , on the existing switch board including making connections, required material , labour t&p etc. for proper completion of work to the satisfaction of engineer in charge .

Erection & testing of ceiling fan & regulator etc. excluding supply of down rod complete in all respect as per P.W.D.1115.

S/F of power plug with 20A/250V flush type modular switch and 5 pin 20Amp / 250V flush type universal modular socket switch on concealed M.S. box including suplly of all material labour T&P etc. required for proper completion of work. as per P.W.D. 1139A

S\F of water tight oblong 10 watt LED bulb head luminaire with driver set confirming to IP 05 AND ABOVE Protection complete in all respect.

Erection and testing of fresh exhaust fan on the existing hole with suitable side of rag bolts nots and washers etc complete in all respect.

S\F of 1 no 8 SWG GI wire in 15mm dia GI pipe for earthing layed in ground or in wall complete in all respect.

S\F of sheet steel enclosure surface flush mounting fitted with 30 amp 3 pin and earth metal clad scrapping earth plug and socket complete in all respect.

S\W of inverter point for light fan and plug with 1.5 sqmm FRLSH PVC insulted multi strand single core copper conductor cable complete.

Supply & fixing steel tubular pole 9.50 metre long designated 410 sp 38 in 1:3:6 cement concrete foundation including excavation backfilling etc. complete in all respect.

Supply & fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt confirming to IP66 protection complete in all respect.