Irrigation Department Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Irrigation Department Tender
Eprocure
Opening Date7 Oct 2024
Closing Date15 Oct 2024
Tender Amount₹ 2,04,00,000
Costs
EMD
₹ 4,08,000Document Cost
₹ 2,354Tender Fee
Refer Documents
Summary
03/se-i/2024-25
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPIDC_963319_7Bid Award Id
ViewTender No
03/SE-I/2024-25Tender Authority
Irrigation Department ViewPurchaser Address
-Website
http://http://idup.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Fist class brick work in 1 : 4 C.M. i/c cost of all material, labour, T&P etc.Complete of work.
94.67
-
-
R.C.C. work with cement, approved coarse sand and 20 mm guage approved stone grit in the proportion of 1:1.5:3 in i.e. having spans upto 6.0m, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (for column and T-Beams)
44.47
-
-
R.C.C. work with cement, approved coarse sand and 20 mm guage approved stone grit in the proportion of 1:1.5:3 in i.e. having spans upto 6.0m, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (for Slab 1:1.5:3)
22.92
-
-
Steel Reinforcement (TMT) including cost of bending, binding, cutting and placing of reinforcement,T & P etc i/c cost of binding wire but excluding cost of steel for proper completion of work.
5.05
-
-
Cement sand plaster in C.M. 1 : 4 i/c cost of all material, labour, T&P etc. complete.
956.32
-
-
Providing wall putty on new surface with approver quality material of burger, j.k., birla or similar make over one coats of water based cement primer of ICI brand for smoothing and levelling of the surface as per reqirement and direction of engineer in charge i/c cost of all material, labour, T&P etc. complete
956.32
-
-
Finish walls with two coat with exterior & interior emulsion paint of approved brand and manufaciure such as Burger, J&N, Shalimar, Asian paint(Apex) of required shade on undacorated wall surface to give even shade @ 1.25 ltr per 10 sqm including one coat of primer applied @ 0.75 ltr/sqm i/c all cost of matrials, labour, Tools & plants etc. required for proper completion of the work.
956.32
-
-
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including supply of sand from a distance of 8 km from site and lift upto 1.5m including cost of sand, labour, T&P etc complete in all respect.
24.51
-
-
Providing and Laying of Brick ballast 2.50 cm gauge i/c cost of all material, labour, T&P etc.Complete of work.
6.68
-
-
Laying C.C. 1:2:4 with well graded stone ballast 22.5-45 mm size including cost of material, labour, T&P etc.
6.68
-
-
S/F 6 to 8mm ivory or light shade vertified Tiles 600x600 mm size in flooring in skirting with 1:3 approved cement and coarse sand mortar firished with in its cement colour slury, jointing and polishing of approved quality complete including all material labour T&P etc complete
217.92
-
-
Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each olher, over 20 mm thick base of cement modar 1:4 cement and coarse sand mixed wiih water proofng compound spreadirg cement slurry mixed with cement concreie water proofing compound filled gaps of coba & top of coba mortar mixed wilh water proofing compouid in 1 :4 cement and coarse sand motar finished smooth & top mashed false square 30cm xcm and side wall parapet shall be moro tylhic ptasler wall upto 30 cm higher and junctior and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with lop finished ptaster mixed with acelic water proofilg compound @ 2% by weighl & lncluding S/o all material, labour, t&p etc complete for proper complelion of work.
100.52
-
-
Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materialls, labour, Tools & plants etc. Requird for proper completion of work
0.99
-
-
P/F Suppy & fixing of 4.5 Cm. thick teak wood part( panelled and part glaazed door and window shutter including supply & fixing of wooden cleats and stops and incuding fixing & adjustment of hinges, bolts, locks, handles spring and or other fitings but excluding their supply and including painting with two coats of black Japan or all iron fitting.if necessary. Including flxing the gllass panes wilh putty for bradglass and glass to be 4mm.thick.fitting with necessary screws to be supplyed by the deptt.
35.56
-
-
Supply and fixing of 3.8 cm. Thick Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5mm or2 mm or 1.5 mm ( 1/10 or 1/12 or 1/16 inch) mesh or any other size with necessary beadings, i/c supply and fixing of wooden cleats stops and i/c fixing adjustment of hinges, bolts, locks, handles, spring and or other fitting but excluding their supply and i/c two coats of black Japan on all iron fitting if necessary, fitting with necessary screws to be supplied departmently. but sheesham wood.
35.56
-
-
Painting or varnishing work two coat on new wooden work over one coat of ready mixed priming paint approved supeior quality ready mixed paint or varnish including supply of all matedals, labour, Tools & planls etc. required for proper compietion of the work.
142.24
-
-
P/F Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete.
33.39
-
-
Providing and injection chemical emulsion on bottom surface and sides and the back fill in immediate contact with the foundaiton structure and v7.5 lires/Sqm specified with chlorpyrephoes E.C 20% with 1% concentration for preconstruction anti termit treatment and creating a chemical barrier under and around foundation walls, column, pits back fill earth junction of wall and floors external perimeter of building surrounding pipe under apron etc.ertical surface of the sub structure of each side
187.5
-
-
Providing and fixing hand rails and bal trade modular system passive SS-304 grade decorative railing system comprising of hand rail 50mm and 1.5mm thick and 3 no horizontal steel pipe of 19mm dia and 1.5 mm thick of equal spacing with balustrade of SS pipe of 38 mm and 1.5 mm thick @ 1200mm C/C of passivated SS 304 grade and fix duly on the floor with specially design rivet expansion bolt and finish the surface food and covering with steel shoe, with all visible stainless steel metal of 304 grade in satin finish height of railing is 900 mm as per detailed specification as per approval of Engineer-icharge.
23.13
-
-
Finishing ceiling with POP approved Brand & manufacture and of required shade & undacorated wall surface to give even shade over including curing, cost of all materials, labours, T&P etc. required for completion of the work.
103.83
-
-
25mm thick damp proof course of cement concrete consisting of 1 part cement, 1.5 part approved coarse sand & 3 parts approved 13mm graded stone grit with & including water proofing materials as ordered by E/I in the proportion as specified by the manufacturers including supply of all material, labour, T & P etc, required for proper completion of the work including proper curing and shuttering
14.37
-
-
Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7kg/sqm approx including cost of fuel if any with all cost of labour, materail, T&P etc complete in all respect
14.37
-
-
Vehicle Stand
Earth work in foundation in dry ordinary soil (loam clay or sand) including lift up to 1.5 meter and lead up to 30 meter and including back filling, watering and ramming of excavated earth into the trenches or into the space between the structure and the sides of foundation trenches or into the plinth with removal and disposal or surplus earth as directed by the Engineer-incharge up to a distance of 30M.
60.03
-
-
Ordinary centering and shuttering for C.C. 1:3:6
16.64
-
-
Providing and laying in cement concrete 1:3:6 (1 cement :3 coarse sand :6 graded Stone aggregate 40 mm nominal size) in foundation and floors and curing complete, including cost of all material, labour, T&P, shuttering etc required for completion of work.
5.07
-
-
Fist class brick work in 1 : 4 C.M. i/c cost of all material, labour, T&P etc.Complete of work.
17.5
-
-
R.C.C. work with cement, approved coarse sand and 20 mm guage approved stone grit in the proportion of 1:1.5:3 in i.e. having spans upto 6.0m, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (for column and T-Beams)
13.65
-
-
R.C.C. work with cement, approved coarse sand and 20 mm guage approved stone grit in the proportion of 1:1.5:3 in i.e. having spans upto 6.0m, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (for Slab 1:1.5:3)
8.78
-
-
Steel Reinforcement (TMT) including cost of bending, binding, cutting and placing of reinforcement,T & P etc i/c cost of binding wire but excluding cost of steel for proper completion of work.
1.68
-
-
Cement sand plaster in C.M. 1 : 4 i/c cost of all material, labour, T&P etc. complete
222.09
-
-
Providing wall putty on new surface with approver quality material of burger, j.k., birla or similar make over one coats of water based cement primer of ICI brand for smoothing and levelling of the surface as per reqirement and direction of engineer in charge i/c cost of all material, labour, T&P etc. complete.
222.09
-
-
Finish walls with two coat with exterior & interior emulsion paint of approved brand and manufaciure such as Burger, J&N, Shalimar, Asian paint(Apex) of required shade on undacorated wall surface to give even shade @ 1.25 ltr per 10 sqm including one coat of primer applied @ 0.75 ltr/sqm i/c all cost of matrials, labour, Tools & plants etc. required for proper completion of the work.
222.09
-
-
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including supply of sand from a distance of 8 km from site and lift upto 1.5m including cost of sand, labour, T&P etc complete in all respect,
20.91
-
-
Providing and Laying of Brick ballast 2.50 cm gauge i/c cost of all material, labour, T&P etc.Complete of work.
6.97
-
-
Laying C.C. 1:2:4 with well graded stone ballast 22.5-45 mm size including cost of material, labour, T&P etc.
6.97
-
-
S/F 6 to 8mm ivory or light shade vertified Tiles 600x600 mm size in flooring in skirting with 1:3 approved cement and coarse sand mortar firished with in its cement colour slury, jointing and polishing of approved quality complete including all material labour T&P etc complete
71.86
-
-
Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each olher, over 20 mm thick base of cement modar 1:4 cement and coarse sand mixed wiih water proofng compound spreadirg cement slurry mixed with cement concreie water proofing compound filled gaps of coba & top of coba mortar mixed wilh water proofing compouid in 1 :4 cement and coarse sand motar finished smooth & top mashed false square 30cm xcm and side wall parapet shall be moro tylhic ptasler wall upto 30 cm higher and junctior and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with lop finished ptaster mixed with acelic water proofilg compound @ 2% by weighl & lncluding S/o all material, labour, t&p etc complete for proper complelion of work.
67.57
-
-
Finishing ceiling with POP approved Brand & manufacture and of required shade & undacorated wall surface to give even shade over including curing, cost of all materials, labours, T&P etc. required for completion of the work.
67.57
-
-
25mm thick damp proof course of cement concrete consisting of 1 part cement, 1.5 part approved coarse sand & 3 parts approved 13mm graded stone grit with & including water proofing materials as ordered by E/I in the proportion as specified by the manufacturers including supply of all material, labour, T & P etc, required for proper completion of the work including proper curing and shuttering.
6.65
-
-
Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7kg/sqm approx including cost of fuel if any with all cost of labour, materail, T&P etc complete in all respect.
6.65
-
-
Division Office
Dismantling brick work or stone work and cement concrete in cement mortar and including stacking of material with in a distance of 60M as per direction of Engineer-in-charge
544.38
-
-
First class brick work in 1 : 4 C.M. i/c cost of all material, labour, T&P etc.Complete of work.
165.63
-
-
R.C.C. work with cement, approved coarse sand and 20 mm guage approved stone grit in the proportion of 1:1.5:3 in i.e. having spans upto 6.0m, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (for column and T-Beams)
85.14
-
-
R.C.C. work with cement, approved coarse sand and 20 mm guage approved stone grit in the proportion of 1:1.5:3 in i.e. having spans upto 6.0m, excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. (for Slab 1:1.5:3)
136.87
-
-
Steel Reinforcement (TMT) including cost of bending, binding, cutting and placing of reinforcement,T & P etc i/c cost of binding wire but excluding cost of steel for proper completion of work.
16.65
-
-
Dismantling of old & damaged plaster including disposal of refuse with in distance of 60 meters i/c cost of all material, labour, T&P etc. complete.
3348.83
-
-
Cement sand plaster in C.M. 1 : 4 i/c cost of all material, labour, T&P etc. complete.
3348.83
-
-
Providing wall putty on new surface with approver quality material of burger, j.k., birla or similar make over one coats of water based cement primer of ICI brand for smoothing and levelling of the surface as per reqirement and direction of engineer in charge i/c cost of all material, labour, T&P etc. complete.
3348.83
-
-
Finish walls with two coat with exterior & interior emulsion paint of approved brand and manufaciure such as Burger, J&N, Shalimar, Asian paint(Apex) of required shade on undacorated wall surface to give even shade @ 1.25 ltr per 10 sqm including one coat of primer applied @ 0.75 ltr/sqm i/c all cost of matrials, labour, Tools & plants etc. required for proper completion of the work.
3348.83
-
-
Providing and laying stone ballast well graded material, spread in uniform layer under the interlocking Tiles mixing by mixture in place method and compacting it properly i/c cost of all material, labour, T&P etc. Complete of work.
238.45
-
-
Laying C.C. 1:4:8 with well graded stone ballast 5.60-22.5 mm size including cost fo material, labour, T&P etc.
119.22
-
-
Supply & laying of 80 mm thick Precated cement concrete Interlocking paver blocks ISI marked confimlng to lst 15658-2006 with top layer of minimum 5 mm thicknes of O.P. Cement, smooth high cross finish, skid rasistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concerete paver block shall not be less than 40 MPa and weight 4.50 kg perNo. i/c cost of material, with blanket layer of 4.00 cm thick fine sand including labour, T&P, etc required for proper completion of work.
1192.22
-
-
Dismantling C.C. or brick or granolithic floor including base concrete and including stacking of dismantled material with in 60 M distance including cost of all labour, T&P etc complete.
459.24
-
-
Sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including supply of sand from a distance of 8 km from site and lift upto 1.5m including cost of sand, labour, T&P etc complete in all respect.
91.85
-
-
Providing and Laying of Brick ballast 2.50 cm gauge i/c cost of all material, labour, T&P etc.Complete of work.
45.92
-
-
Laying C.C. 1:2:4 with well graded stone ballast 22.5-45 mm size including cost of material, labour, T&P etc.
45.92
-
-
S/F 6 to 8mm ivory or light shade vertified Tiles 600x600 mm size in flooring in skirting with 1:3 approved cement and coarse sand mortar firished with in its cement colour slury, jointing and polishing of approved quality complete including all material labour T&P etc complete.
566.31
-
-
Providing and fixing at all height false ceiling of 4 mm thick phenol bonded Bamboo Mat board (595x595 mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 mm c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64 mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-incharge.
63.75
-
-
Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each olher, over 20 mm thick base of cement modar 1:4 cement and coarse sand mixed wiih water proofng compound spreadirg cement slurry mixed with cement concreie water proofing compound filled gaps of coba & top of coba mortar mixed wilh water proofing compouid in 1 :4 cement and coarse sand motar finished smooth & top mashed false square 30cm xcm and side wall parapet shall be moro tylhic ptasler wall upto 30 cm higher and junctior and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with lop finished ptaster mixed with acelic water proofilg compound @ 2% by weighl & lncluding S/o all material, labour, t&p etc complete for proper complelion of work.
1094.99
-
-
Teak wood wrought framed and fixed including simple mouldings, straight work as in chaukhats including supply of all materialls, labour, Tools & plants etc. Requird for proper completion of work.
0.57
-
-
P/F Suppy & fixing of 4.5 Cm. thick teak wood part( panelled and part glaazed door and window shutter including supply & fixing of wooden cleats and stops and incuding fixing & adjustment of hinges, bolts, locks, handles spring and or other fitings but excluding their supply and including painting with two coats of black Japan or all iron fitting.if necessary. Including flxing the gllass panes wilh putty for bradglass and glass to be 4mm. thick.
50.63
-
-
Supply and fixing of 3.8 cm. Thick Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5mm or2 mm or 1.5 mm ( 1/10 or 1/12 or 1/16 inch) mesh or any other size with necessary beadings, i/c supply and fixing of wooden cleats stops and i/c fixing adjustment of hinges, bolts, locks, handles, spring and or other fitting but excluding their supply and i/c two coats of black Japan on all iron fitting if necessary, fitting with necessary screws to be supplied departmently.
50.63
-
-
Painting or varnishing work two coat on new wooden work over one coat of ready mixed priming paint approved supeior quality ready mixed paint or varnish including supply of all matedals, labour, Tools & planls etc. required for proper compietion of the work.
212.72
-
-
Providing and injection chemical emulsion on bottom surface and sides and the back fill in immediate contact with the foundaiton structure and v7.5 lires/Sqm specified with chlorpyrephoes E.C 20% with 1% concentration for preconstruction anti termit treatment and creating a chemical barrier under and around foundation walls, column, pits back fill earth junction of wall and floors external perimeter of building surrounding pipe under apron etc.ertical surface of the sub structure of each side
1095
-
-
Supplying and fixing Main Gate, fixing it at boundary wall of the building i/c cost of all material, labour, T&P etc.Complete of work.
1
-
-
Finishing ceiling with POP approved Brand & manufacture and of required shade & undacorated wall surface to give even shade over including curing, cost of all materials, labours, T&P etc. required for completion of the work.
776
-
-
Construction of Rain Water Harvesting (R.W.H) including all cost of material, labour, T&P etc. Complete of work.
2
-
-
Electric Works
Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in heavy guage PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth contunity wire, Modular type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash with all cost of labour, material, T&P, etc complete in all respect.
260
-
-
Wiring points for two way light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in heavy guage PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth contunity wire and two number two way Modular type switches & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash with all cost of labour, material, T&P etc complete in all respect.
9
-
-
Wiring points for Fan /Fresh air fan (light duty exhaust fan )with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in heavy guage PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth contunity wire, Modular type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash with all cost of labour, material, T&P etc complete in all respect.
20
-
-
Wiring points for Plug with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in heavy guage PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth contunity wire, Modular type switch & socket sheet etc.complete in all respects.as directed including matching colour wash. with all cost of labour, material, T&P etc complete in all respect. (5 Amp)
40
-
-
Wiring points for Call bell with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in heavy guagePVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth contunity wire, Modular type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash. with all cost of labour, material, T&P etc complete in all respect.
10
-
-
Supply and wiring of submain with two number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy guage PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 14 SWG copper earth contunity wire including colour wash etc. complete in all respects
295
-
-
Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 25 mm dia heavy guage (2mm thick) PVC conduit with 1 No. 4 sq.mm. FR PVC insulated multistrand copper conductor cabel as earth continuity wire complete in all respects.
375
-
-
Supply and wiring of 4 number 10 Sq.mm.FR PVC insulated 1100 V grade Multistrand single core copper conductor cable in 32 mm heavy guage PVC conduit pipe partly concealed in wall and partly laid in slab along with reinforcement before concreting, with two number 6 SWG copper earth continuity wire including colour wash etc. complete in all respects.
120
-
-
Supply and wiring of 4 number 16 Sq.mm.FR PVC insulated 1100 V grade Multistrand single core copper conductor cable in 40 mm heavy guage PVC conduit pipe partly concealed in wall and partly laid in slab along with reinforcement before concreting, with two number 10 SWG copper earth continuity wire including colour wash etc. complete in all respects.
80
-
-
Supply fixing and concealing of 25mm dia. 2 mm thick PVC conduit pipe with ISI mark imbossed with the PVC Accessories conforming to IS No 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid plasting with cement send mortar finished to the level with matching colour wash including cost of all material labour and T & P etc. Required for proper completion of the work as per directions and to the satisfaction of engineer in charge.
125
-
-
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
1
-
-
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects.
330
-
-
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects.
220
-
-
Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work.
4
-
-
Supply and fixing of factory fabricated M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work .
4
-
-
Supply and fixing of 240 volts 'L' series miniature circuit breaker 9 K.A / 10 K.A.in existing MCB, DB complete with connections as required including supply of all material, labour and T & P etc. required for proper completion of the work.6-32 Amp (LEGRAND LEXIC)
70
-
-
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge including supply of all material, labour and T & P etc. required for proper completion of the work. 40 Amp 4 pole MCB (LEGRAND LEXIC)
20
-
-
Supply fixing and making connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge including supply of all material, labour and T & P etc. required for proper completion of the work. 63 Amp 4 pole MCB (LEGRAND LEXIC)
2
-
-
Supply and fixing of surface/ flush mounting TPN distribution board (LegrandLexic) without MCB complete in all respect, as directed at site by Engineer Incharge. including supply of all material, labour and T & P etc. required for proper completion of the work.4 way TPN (LEGRAND LEXIC)
8
-
-
Supply and fixing of surface/ flush mounting TPN distribution board (LegrandLexic) without MCB complete in all respect, as directed at site by Engineer Incharge. including supply of all material, labour and T & P etc. required for proper completion of the work.6 way TPN (LEGRAND LEXIC)
4
-
-
Supply and fixing Single Pole MCBS Blanking Plate including supply of all material, labour and T & P etc. required for proper completion of the work.
25
-
-
Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work.
40
-
-
Supply &fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge. including supply of all material, labour T & P etc required for proper completion of work.
34
-
-
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, including supply of all material, labour T & P etc required for proper completion of work.
38
-
-
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers including supply of all material, labour T & P etc required for proper completion of work.
18
-
-
Supply & fixing of 16 gauge M.S.drum duly painted including making hole in the wall for exhaust fan and finishing properly including supply of all material, labour T & P etc required for proper completion of work.
16
-
-
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16 SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work
40
-
-
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge, including supply of all material, labour T & P etc required for proper completion of work.(16 sqmm 4 core)
80
-
-
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge, including supply of all material, labour T & P etc required for proper completion of work.(35 sqmm 3.5 core)
45
-
-
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.(16 sqmm)
31
-
-
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.(25 sqmm)
20
-
-
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.(35 sqmm)
14
-
-
Main L.T. Panel at Ground floor i/c all cost of material, labour and T&P
1
-
-
Sub panel for incoming 100 Amp. i/c cost of all material, labour and T&P etc
2
-
-
S/F of danger board fabricated from 10 mm gauge M.S. As per I.E. Rules i/c all cost of labour, material, T&P etc
4
-
-
S/L 1800mmx900mmx12mm thick chequered rubber matting of tested quality i/c all cost of labour, material, T&P etc
5
-
-
Providing and fixing Led tube light i/c all cost of material, labour and T&P etc.
42
-
-
P/F focus light 12 watt i/c all cost of material, labour and T&P etc.
7
-
-
P/F ceilling light light 15 watt i/c all cost of material, labour and T&P etc.
43
-
-
P/F wall light 9 watt Fency i/c all cost of material, labour and T&P etc.
60
-
-
P/F Main Gate LED light i/c all cost of material, labour and T&P etc.
2
-
-
External Electric Works of Building
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge, including supply of all material, labour T & P etc required for proper completion of work.(16 sqmm 4 core)
90
-
-
Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge, including supply of all material, labour T & P etc required for proper completion of work.(35 sqmm 3.5 core)
75
-
-
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.(16 sqmm)
84
-
-
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.(25 sqmm)
35
-
-
Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge.(35 sqmm)
20
-
-
Supply and Fixing of steel tubular pole 7.5 Metre long designated 410 SP-6 in 1:3:6 cement concrete foundation including excavation back filling etc.complete in all respects.
1
-
-
Supply and Fixing of service bracket of 50mm. Dia 4 meter long fabricated from class ''B'' G.I. pipe complete with two bend, socket, wall clamps. 7/3.15 mm G.I. stay wire, stay insulators etc..complete in all respects
4
-
-
Supply and fixing of factory wired Sodium vapour lamp street lighting luminaires single piece cast 'Aluminium' body Suitable for 70 watt S.V. lamp including integral control gear, 70 watt S.V. lamp on G.I.Pipe bracket complete on pole with all cost of labour, material, T&P etc. complate in all respect.
3
-
-
Supply & wiring of submain with two numbers 2.5 sqmm PVC insulated 1100 V grade aluminium conductor single core cable in 20 mm dia, heavy gauge rigid steel conduit on surface, with one number 8 SWG G.I. earth contunity wire for connection from cable end box to Fitting with all cost of all labour, material, T&P etc complete in all respect.
170
-
-
P/F of Ceiling Fan with fan motor of A.C. permanent insulation capacitor rating conforming BEE 5 star raiting with latest amendmewnt. The rated voltage 220/240 volts, 50 Hz, 1- ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system, 1200 mm sweep.
30
-
-
Sanitary &plumbing Works
Providing and fixing Anglo Indian W.C. Pan with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 ltr low level cistern i/c flush pipe, with all fitting and fixtures complete.
2
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever equired
1
-
-
Providing and fixing white vitreous china flat back wash basin size 550x400mm with C.I. brackets, single 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required with all cost of labour, material, T&P, etc required for completion of work.
4
-
-
Providing and fixing stainless steel A ISI 304 (18/8) Kitchen sink size 470x420 mm bowl depth 178 mm as per IS 13983 with C.I. brackets & stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the wall wherever required with all cost of labour, material, T&P, etc required for completion of work.
1
-
-
Providing and fixing 32 mm Dia flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete with all cost of labour, material, T&P, etc required for completion of work.
4
-
-
Providing and fixing 40 mm Dia flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete with all cost of labour, material, T&P, etc required for completion of work.
1
-
-
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete with all cost of labour, material, T&P, etc required for completion of work.
4
-
-
Providing & fixing PTMT towl rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing not less than 190 gms with all cost of labour, material, T&P, etc required for completion of work.
4
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : with all cost of labour, material, T&P, etc required for completion of work.
4
-
-
Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms with all cost of labour, material, T&P, etc required for completion of work.
4
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet with all cost of labour, material, T&P, etc required for completion of work.
2
-
-
Providing and fixing 75 mm dia on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion with all cost of labour, material, T&P, etc required for completion of work. (i) Single socketed pipes.
110
-
-
Providing and fixing110 mm dia on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion with all cost of labour, material, T&P, etc required for completion of work. (i) Single socketed pipes.
93
-
-
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete with all cost of labour, material, T&P, etc required for completion of work.
5
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete with all cost of labour, material, T&P, etc required for completion of work.
68
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 15 mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
185
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
65
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 25 mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
78
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 32 mm dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
125
-
-
Providing and fixing 45 cm long 15 mm dia unplasticised PVC connection pipe with brass unions with all cost of labour, material, T&P, etc required for completion of work.
23
-
-
Providing & fixing CP brass stop cock (Concealed) 15mm dia all cost of labour, material, T&P, etc required for completion of work.
20
-
-
Providing & fixing C.P. brass long body bib cock (20mm dia nominal bore) of approved quality conforming to IS standards and weighing not less than 690 gms with all cost of labour, material, T&P, etc required for completion of work.
32
-
-
Providing & fixing C.P. brass angle valve for basin mixer and gyser points(15mm dia nominal bore) of approved quality conforming to IS 8931 with all cost of labour, material, T&P, etc required for completion of work
8
-
-
Providing and fixing gun metal gate valve with wheel (25mm dia nominal bore) of approved quality (screwed end) with all cost of labour, material, T&P, etc required for completion of work.
8
-
-
Providing and fixing gun metal gate valve with wheel (32mm dia nominal bore) of approved quality (screwed end) with all cost of labour, material, T&P, etc required for completion of work.
6
-
-
Providing and fixing CP stop cock (20mm dia nominal bore) of approved quality with all cost of labour, material, T&P, etc required for completion of work.
18
-
-
Providing and fixing ball valve (brass) (25mm dia nominal bore) of approved quality, High or low pressure, with plastic floats for overhead tanks complete with all cost of labour, material, T&P, etc required for completion of work.
5
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank with all cost of labour, material, T&P, etc required for completion of work.(capacity 1000 litre tank).
4000
-
-
Qty for internal sewerage system
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m with all cost of labour, material, T&P, etc required for completion of work. ( pipes 80mm to 300mm dia)
85
-
-
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround P.V.C Pipes including bed concrete as per standard design with all cost of labour, material, T&P, etc required for completion of work.(100mm dia)
20
-
-
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround P.V.C Pipes including bed concrete as per standard design with all cost of labour, material, T&P, etc required for completion of work.(150mm dia)
65
-
-
Providing and fixing PTMT Bottle trap fore wash basin bottle trape 31mm single piece moulded with hight of 270 mm effective length of tail pipe 260 mm from th centre of th weste coupling 77 mm breath with 25 mm minimum water seal weighing not les then 260 gms
4
-
-
Providing and fixing sqare mouth S W gully trap class SP- 1 complete with C.I grating brick massonary chamber with water light C.I. Cover with frame of 300x300 mm size (inside) the weight of cover to be note less than 4.50 kg and frame to be not less than 2.70kg as per standered design (100x100mm size ptype)
13
-
-
Constructing brick masonry manhole with 7.5 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design with all cost of labour, material, T&P, etc required for completion of work. (inside size 90x80xcm &45 cm deep i/c C.I. Cover)
18
-
-
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design with all cost of labour, material, T&P, etc required for completion of work.(20x20 mm square bar)
16
-
-
Qty for External sanitary & plumbing work
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete(25mm dia nominal bore)
75
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete(32mm dia nominal bore)
55
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete(40mm dia nominal bore)
40
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete(50mm dia nominal bore)
30
-
-
Providing and fixing gun metal non return valve with wheel of approved quality with all cost of labour, material, T&P, etc required for completion of work.(25mm dia nominal bore)
8
-
-
Providing and fixing gun metal non return valve with wheel of approved quality with all cost of labour, material, T&P, etc required for completion of work.(32mm dia nominal bore)
6
-
-
Providing and fixing gun metal non return valve with wheel of approved quality with all cost of labour, material, T&P, etc required for completion of work.(40mm dia nominal bore)
5
-
-
Providing and fixing gun metal non return valve with wheel of approved quality with all cost of labour, material, T&P, etc required for completion of work.(50mm dia nominal bore)
2
-
-
Constructing masonary chamber 30x30x50 cm.,inside with F.P.S. Bricks of class designation 7.50 in cement mortar 1:4 ( 1 cement ,4 coarse sand) for stop cock, with C.I. Surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 and inside plastering with cement mortar 1:3 12 mm thick finished with a floating coat of neat cement comlete as per standard design .
8
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m with all cost of labour, material, T&P, etc required for completion of work.(pipes 80 mm to300 mm dia)
45
-
-
Providing and laying cement concrete 1:5:10( 1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominalsize) alround pvc pipe s i/c bed concrete as per standerd design with all cost of labour, material, T&P, etc. Required for comletion of work .(100 mm dia)
45
-
-
Constructing brick masonry manhole with 7.5 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design with all cost of labour, material, T&P, etc required for completion of work.( inside size 120x90cm & 90 cm deep i/c C.I. Cover with frame (light duty) total wt. Of cover & frame to be not less then 116 kg.( wt of cover 58 kg & wt of frame to be not less then 36 kg (wt. Of cover 23 kg.& wt of frame 15 kg)
4
-
-
S/F Submerseble 5"200' boring with pvc pipe 4".6kg200',submerseble ,pannel starter,cable 40 mtr 21mm , pipe role 11/4'30 mtr and all cost of material , labour T&P etc complete
1
-
-
S/F curtain size 9'x4' ready i/c all cost of material, labour,and T&P etc completion of work
95
-
-
S/F S.S. Curtain Road with material & installation
105
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements