Irrigation Department Tender

Standard

Phase

Frequency

Wave form Distortion

Response Time

Speed of Correction

Suitability

Duty Cycle

Efficiency

Losses at No Load

Losses at Full Load

Temperature Rise

Laminations Used

Carbon Brushes Used

Class of Insulation

Break Down Strength

All the above will be incorporated inside high-quality epoxy painted sheet steel tank fitted with Cooling radiators and mounted on uni-directional wheels, other fittings Would include lifting Lugs, Oil Level Indicators, Earthing Terminals -2 Nos, Rating Plate, Oil Filling value & Name plate.

Supply, Installation, Testing, Commissioning of indoor type LT Panel (IP 55 Indoor/ Outdoor Type) or Saryu Barrage control room fully wired along with 200Amp x 01 no. incomer MCCB FP 36 kA with microprocessor release for O/C + S/C protection with rotary handle, multifunctional meter, indicating, CT, TP 63 Amp x 8 nos. MCCB microprocessor based with 10kA breakage current with TM release O/C + S/C protection & rotary handle, 160 Amp x 01 no. 10 kA TP MCCB with TM release O/C + S/C protection & rotary handle, 32 Amp x 8 nos. FP 10 kA MCB, Earth Fault Relays and 250 Amp Al. Busbar. Above work include Modification in existing power / control cable connection within the LT panel room by making provision for extension of existing cables to terminate the same in new LT panel at Saryu Barrage control room. This work includes making of civil pedestal if required for erection of new LT panel.

Supply, Installation, Testing, Commissioning of Outdoor type wall/floor mounted panel (IP 55 Outdoor Type) for link canal, front operated fabricated from 1.6 mm CRCA sheet steel duly powder coated with siemens grey 1 (ral7035) after seven tank system with 50-60 microns thickness complete with door knob, control/power wiring and other acc. complete in all respect consisting of 62 Amps 4P incomer MCB & 20 Amps 4P MCBs as per requirement.

Supply, Installation, Testing, Commissioning of indoor type Main Power Distribution Panel fully wired along with 250Amp x 02 nos. incomer MCCB FP 36 kA with microprocessor release for O/C + S/C protection with rotary handle, Servo bypass switch 250 Amp, multifunctional meter, indicating, CT, 200Amp x 01 no. incomer MCCB FP 36 kA with microprocessor release for O/C + S/C protection with rotary handle, change over switch FP 250 Amp x 04 nos. Earth Fault Relays and 250 Amp Al. Busbar. Above work include Supply & installation of all interconnected suitable Al. armoured power cabling & Cu. Flexible suitable control cabling in between changeover panel, servo voltage stabilizer & 3 nos. DG sets complete in all respect including cable tray within the DG room & civil pedestal for erection of changeover panel and servo stabilizer.

Supply & installation of 3.5 Core x 70 sq.mm Aluminium Conductor, 1.1 KV, PVC Insulated, Inner Sheathed, GI Armoured, PVC Sheathed Power Cable termination and laying from Changeover Panel (existing DG room) to electrical pole.

Supply & installation of 3.5 Core x 70 sq.mm Aluminium Conductor, 1.1 KV, PVC Insulated, Inner Sheathed, GI Armoured, PVC Sheathed Power Cable termination and laying from Changeover panel (existing DG room) to existing DG set.

Supply & installation of 3.5 Core x 70 sq.mm Aluminium Conductor, 1.1 KV, PVC Insulated, Inner Sheathed, GI Armoured, PVC Sheathed Power Cable termination and laying from Changeover panel to Servo Stabilizer.

Supply, Installation, Testing and commissioning of Three Pahse 15kVA Cubicle Type Floor/Surface Mount SCADA EMF Panel (IP 55 outdoor Type) with Hinged Door at Saryu Barrage Control Room made of mild steel finished with power coating fully wired along with 32Amp x 03 no incomer MCB, multifunctional meters, indicators for Solar, Main Supply and DG along with 25Amp x 03 no. 4 Pole Contractors Microproccessor Based AMF Module for complete automation from 3 sources with Auto/Manual/Bypass mode. Above work include Modification in existing power/control cable connection at Site by making provision for extension of existing cables to terminate the same in new AMF panel at Saryu Barrage control room. This work includes making of pedestal/necessary civil work if required for erection of panel and all labour, cartage etc. complete.

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 meters below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one No.8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe andG.I. wire will be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layer of charcoal/coke and salt at least 150mm thick alround etc. as per direction of Engineer-in-charge complete in all respects as per drawing(This will apply for earthing of poles also).

Supply and laying of 25mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.