Inland Waterways Authority Of India Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Inland Waterways Authority Of India - IWAI Tender
Eprocure
Opening Date7 Aug 2020
Closing DateCancelled
Tender AmountRefer Documents
Costs
EMD
₹ 11,04,000Document Cost
₹ 2,950Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_IWAI_576136_1Bid Award Id
ViewTender No
IWAI/NW-16/Terminal/2019-20Tender Authority
Inland Waterways Authority Of India ViewPurchaser Address
-Website
http://https://iwai.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Earthwork
-
-
-
Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts including bailing out water where necessary, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 91 m3
91
-
-
Earth / sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties & taxes as may be necessary, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 69.65 m3
69.65
-
-
Steel Reinforcement
Steel reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding all complete up to plinth level - Hot rolled deformed bars, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Main Gate including Board – 0.16 Tonnes
(ii) Boundary Wall with barbed fencing – 2.05 Tonnes
2.21
-
-
Concrete
-
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for R.C.C. work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportion as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of EIC. All works up to plinth level, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Main Gate including Board – 0.71 m3
(ii) Boundary Wall with barbed fencing – 13.30 m3
14.01
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for R.C.C work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportion as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of EIC. All works above plinth level up to floor V level, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Main Gate including Board – 0.63 m3
(ii) Boundary Wall with barbed fencing – 3.81 m3
4.44
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 8.05 m3
8.05
-
-
Brick work with common burnt clay machine molded perforated bricks of class designation 12.5 conforming to IS 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement :6 coarse sand) with F.P.S. (non-modular) bricks, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 48.30 m3
48.3
-
-
Plastering 15 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) on the rough side of single or half brick wall, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 960 m2
(ii) Equipment Sheds – 2 Nos. – 1000 m2
(iii) Godown – 2000 m2
(iv) Staff Building – 540 m2
(v) Canteen – 420 m2
(vi) Security Room – 180 m2
(vii) DG Room – 300 m2
(viii) Toilet – 600 m2
(ix) Boundary Wall with barbed fencing – 1302 m2
7302
-
-
Painting
-
-
-
Removing dry or oil bound distemper by washing & scraping and sand papering the wall surface smooth including necessary repairs to scratches, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 2100 m2
(ii) Equipment Sheds (2 Nos.) – 3450 m2
(iii) Godown – 4490 m2
(iv) Staff Building – 1190 m2
(v) Canteen – 925 m2
(vi) Security Room – 400 m2
(vii) DG Room – 660 m2
13215
-
-
Applying one coat of distemper primer of approved brand and manufacturer on wall surface after thoroughly brushing the surfaces free from mortar droppings and other foreign matter & including preparing the surface even and sand papered smooth, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 2100 m2
(ii) Equipment Sheds (2 Nos.) – 3450 m2
(iii) Godown – 4490 m2
(iv) Staff Building – 1190 m2
(v) Canteen – 925 m2
(vi) Security Room – 400 m2
(vii) DG Room – 660 m2
13215
-
-
Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing surface even and sand paper smooth, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 2100 m2
(ii) Equipment Sheds (2 Nos.) – 3450 m2
(iii) Godown – 4490 m2
(iv) Staff Building – 1190 m2
(v) Canteen – 925 m2
(vi) Security Room – 400 m2
(vii) DG Room – 660 m2
13215
-
-
Applying one self-priming coat of acrylic emulsion paint of approved brand, thinning by adding water as per specification of manufacturer over freshly plastered wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 1352 m2
1352
-
-
Finishing wall with two coats of acrylic emulsion exterior coatings of approved brand of required shade by thinning 1 litre of paint with 750ml of water to give an even shade after thoroughly brooming the surfaces to remove all dirt and remains of loose powered materials, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 1352 m2
1352
-
-
Roofing
-
-
-
Dismantling all types of corrugated / trapezoidal sheet roofing including ridges, hips, valleys etc. and stacking the materials as directed by the EIC for all levels, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Equipment Shed (2 Nos.) – 275 m2
(ii) Godown – 875 m2
(iii) Canteen - 25 m2
(iv) Toilet – 25 m2
1200
-
-
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275 gm / m2, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Equipment Shed (2 Nos.) – 275 m2
(ii) Godown – 875 m2
(iii) Canteen - 25 m2
(iv) Toilet – 25 m2
1200
-
-
Providing ridges or hips of width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275 gm / m2, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Equipment Shed (2 Nos.) – 20 Running Meter
(ii) Godown – 60 Running Meter
80
-
-
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40 x 3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative - 0.63mm thick with zinc coating not less than 275 gm / m2.
(i) Equipment Shed (2 Nos.) – 40 Running Meter
(ii) Godown – 120 Running Meter
160
-
-
Labour for fitting and fixing galvanized corrugated iron roofing including supplying and fixing with new galvanized screw, J hook, bolts and nuts, washer etc., complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Equipment Shed (2 Nos.) – 275 m2
(ii) Godown – 875 m2
(iii) Canteen - 25 m2
(iv) Toilet – 25 m2
1200
-
-
Labour for taking out and refitting galvanized ridging including supplying and fixing necessary galvanized screw, bolts and nuts, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Equipment Shed (2 Nos.) – 20 Running Meter
(ii) Godown – 60 Running Meter
80
-
-
Roof Treatment
Grading roof for water proofing treatment with cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 120 m2
(ii) Staff Building – 35 m2
(iii) Security Room – 5 m2
(iv) DG Room – 14 m2
174
-
-
Rolling Shutter (7 Nos.)
Providing and fixing rolling shutters of approved make and made of 80mm wide M.S. laths interlocked together through their entire length and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Equipment Shed (2 Nos.) – 35 m2
(ii) Godown – 45 m2
80
-
-
Painting of Roof Truss & Rolling Shutter
Finishing with Epoxy paint (2 or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface etc., complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Equipment Shed (2 Nos.) – 1000 m2
(ii) Godown – 2160 m2
3160
-
-
Doors & windows with chowkaths (16 No. Doors & 36 No. Windows)
-
-
-
Providing wood work in frame (chowkaths) of doors, windows, clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40 mm x 3 mm x 250 mm) as per design embedded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C. and masonry with Sal wood, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 0.80 m3
(ii) Equipment Shed (2 Nos.) – 0.19 m3
(iii) Godown – 0.83 m3
(iv) Staff Building – 0.40 m3
(v) Canteen – 0.20 m3
(vi) Security Room – 0.10 m3
(vii) DG Room – 0.15 m3
(viii) Toilet – 0.05 m3
2.7
-
-
Providing fitting and fixing 1/3 paneled 2/3 glazed wooden shutters for doors / windows including oxidized iron butt hinges (100 mm x 75 mm x 3.55 mm) with necessary screws including glass panes (other fittings to be measured and paid separately) with Teak wood / Sissu Wood with 40 mm thick, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 37.44 m2
(ii) Equipment Shed (2 Nos.) – 8.64 m2 (iii) Godown – 38.88 m2
(iv) Staff Building – 18.72 m2
(v) Canteen – 9.36 m2
(vi) Security Room – 4.68 m2
(vii) DG Room – 6.84 m2
(viii) Toilet – 2.16 m2
126.72
-
-
Window Glass Fitting
Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25mm to 40mm thick: Float glass panes, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 7.20 m2
(ii) Equipment Shed (2 Nos.) – 3.60 m2
(iii) Godown – 16.20 m2
(iv) Staff Building – 1.80 m2
(v) Canteen – 1.80 m2
(vi) Security Room – 1.80 m2
(vii) DG Room – 1.80 m2
(viii) Toilet – 1.80 m2
36
-
-
Grill Work
Providing and fixing M.S, grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 600 Kg
(ii) Equipment Shed (2 Nos.) – 300 Kg
(iii) Godown – 1350 Kg
(iv) Staff Building – 300 Kg
(v) Canteen – 150 Kg
(vi) Security Room – 75 Kg
(vii) DG Room – 150 Kg
(viii) Toilet – 75 Kg
3000
-
-
Tiles Work
-
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colors, shades except burgundy, bottle green, black of any size as EIC, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and joining with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 150 m2
150
-
-
Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown, laid on 30 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 200 m2
200
-
-
Damp Proof Course Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 16.10 m2
16.1
-
-
Barbed Fencing (with Concertina Coil 3 Coils / M length)
-
-
-
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10mm dia etc., complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 424.32 Kg
424.32
-
-
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I staples, turn buckles etc. complete. (Cost of posts, struts, earthwork and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used with G.I. barbed wire, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 604 Running Meter
604
-
-
Providing and fixing concertina coil fencing with punched tape concertina coll 600 mm dia 10 metre open able length (total length 90 m), having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire stud tied with G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron with reinforced barbed tape (R.B.T) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 2044.14 Running Meter
2044.14
-
-
Plumbing Work
-
-
-
Removing and refilling old G. I. Pipes of 15 mm dia with new socket, bend, tee etc. complete including stacking the old serviceable materials at safe place as directed, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 150 Running Meter
(ii) Staff Building – 75 Running Meter
(iii) Canteen – 49 Running Meter
(iv) Security Room – 38 Running Meter
(v) DG Room – 25 Running Meter
(vi) Toilet – 38 Running Meter
375
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints - External work 32 mm, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 120 Running Meter
120
-
-
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 Degree Celsius, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required e.g. elbows, tees, reduces, couplers & connections etc., with trenching, refilling and testing of joints, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 216.10 Running Meter
216.1
-
-
Providing and fixing Polyethelene-Aluminium- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 Degree Celsius, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e. g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Internal work – Exposed on wall (20 mm OD) pipe, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 34 Running Meter
(ii) Staff Building – 17.60 Running Meter
(iii) Canteen – 16.20 Running Meter
(iv) Toilet – 16.20 Running Meter
84
-
-
Toilet Fittings
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with special of standard make and mosquito proof coupling of approved municipal painting of fittings and brackets, cutting and making good the walls and floors wherever required: - W.C. pan with ISI marked white solid plastic seat and lid, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 5 Nos.
5
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580 x 380 x 350 mm with white PVC automatic flushing cistern, with fittings pipe, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C. P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :- Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 4 Nos.
4
-
-
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required - White glazed fire clay kitchen sink of size 600 x 50 x 250 mm, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 1 No.
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require - White Vitreous China wash basin size 630 x 450 mm with a pair of 15mm C.P. brass pillar taps, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 4 Nos.
4
-
-
Other fixtures in terms of clause 17.22, 17.28, 17.29, 17.32, 17.34 & 17.35 of DSR, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 4 Nos.
4
-
-
Toilet Doors: Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 14.70 m2
14.7
-
-
3 Nos. of 3000 litres water tank for storage
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Office – 9000 Ltr
9000
-
-
Gate (6X3), 40mm thick (Unit wt. 7850kg/m3) with Post and Sign Board
Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20 mm dia M.S. bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200 mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100 mm above the middle and top flat is to be flattened and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos. (minimum) strong iron hinges of M.S. bars and flat of same sizes on each leaf to be embedded in C.C. brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (No Separate payment will be made for posts), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
600
-
-
Main Gate Sign Boards
Provision of Retro Reflective Signage of ACP 3mm, Base of 3M HIP Sheet / Pasting of 3M Electrocute Matter Base-ACP 3mm First Layer- Avery / 3M HIP Sheet Second Layer Electrocute HIP type IV sheet/ECF Overlay over the MS Frame for mounting Sign plates Top and Bottom of MS Pipe3” square pipe; 2” square pipe. MS Fabrication using Tata / Jinda / Peakash / Bhushan / Apollo Pipe- 3” & 2” Sq. Pipe duly sanded, cleaned Primer and Epoxy Paint-MRF/Epoxy Primer – MRF and Aluminum Paint-ASPA, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Bollard
Bollards: Supplying and fixing the “Cleat Bollard” of high quality Spheroidal Graphite (SG) Cast Iron material grade 65-45-12 for a capacity of 10 T to 15 T of M/s Trellebrog with an overall size of 410 mm x 220 mm x 165 mm of standard make confirming to the BS 5950:2000 / BS 6349: 1-4 (2013): Part 4 / AS 3990:1993 with the material specification of Ductile cast iron (Spherodal graphite iron) BS eN 1563 ASTM A536 /cast steel ASTM A148 IS 1030/ Anchor Bolts (Galvanized) ISo 898 BS 3692 ASTM / Blasting (standard) Paint (high performance) SSPc-SP10 NAcS no. 2 / Paint (high performance) BS 3516 ISo 12944 and Bolts to be embedded into the cement concrete block of 0.5m x0.3m x0.4m of mix 1:1 1/2:3, complete in all respect as per specifications and direction of EIC and / or his representative
4
-
-
External Roads (5m wide) - 15m
-
-
-
Construction of Sub-grade and earthen shoulders / granular sub-base / reinforcement / shuttering / concrete payment / cement plaster / ICBP with approved materials with all lifts and leads, transporting to site, spreading, grading to required slope and compacting (including compensation of earth).(including cost of testing at site and laboratory as directed by the EIC) (150mm thick), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
13.5
-
-
Construction of granular sub base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix method with rotavator at OMC, and compacting with vibratory roller to achieve the desire density, complete as per clause 401 of MoRTH Specification (with an initial lead of 5 km) (Including of cost of testing of material at site and laboratory as directed by the deptt.) (150mm thick), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
13.5
-
-
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. code for R.C.C. work / R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, support chair, spacers, etc., complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
810
-
-
Providing from work of ordinary timber planking so as to give a rough finish including, centering, shuttering, strutting and propping etc. and removal of the same for in-situ reinforced concrete and plain concrete work in R.C.C. approach road, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
90
-
-
Providing and laying controlled cement concrete pavement of approved grade with 20mm downgraded stone aggregate over a prepared sub-base including dewatering if necessary, spread, compact and finished in a continues operation including provision of construction and expansion joints / plasticizer and curing compound of approved make and hardener of approved make; finishing to lines and grades and curing as specified and directed complete (150mm thick) M30 grade concrete, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
13.5
-
-
Internal Roads (5m wide) – 0.3 km: Providing and applying tack coat using hot straight run bitumen of grade VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1500
-
-
Pavement of Hard Stand Area (150mm thick)
-
-
-
Providing and laying design mix cement concrete of M-30 grade, in roads / taxi tracks / runway, using cement content as per design mix, using course sand and graded stone aggregate of 40mm nominal size in appropriate proportion as per approved & specified design criteria, providing dowel bars with sleeve/tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrator, leveling to required slope/camber, finishing with required texture, including steel from working with sturdy M.S. channel sections, curing, making provisions for contraction/expansion, construction & longitudinal joints (10mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note: Cement content considered in M-30 is @ 340kg/cum. Excess / less cement used as per design mix is payable / recoverable separately. Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer cum
75
-
-
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
500
-
-
Drains
-
-
-
Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means over areas including disposal of excavated earth, lead up to 50m and lift upto 1.5m, disposed earth to be leveled and neatly dressed, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative. All Kinds of Soil
87.48
-
-
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level: 1:3:6 (1 Cement; 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (50mm thk), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
4.86
-
-
Providing and laying in position specified grade of RCC, excluding the cost of centering, shuttering finishing and reinforcement – All work up to plinth level. 1:2:4 (1 Cement; 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
14.58
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
2.1
-
-
Borewell
-
-
-
Boring / drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting sample from different strata, preparing and submitting strata chart/bore log/ including hire & running charges of all equipments, tools plants & machineries required for the job, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative, up to 90 metre depth below ground level. All types of soil & 300 mm diameter
30
-
-
Boring/ drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting sample from different strata, preparing and submitting strata chart/bore log/ including hire & running charges of all equipments, tools plants & machineries required for the job, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative, upto 90 metre depth below ground level. Rocky strata including Boulders. 200 mm diameter
30
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of require dia conforming to IS 4270, of reputed & approved make including painted with outside surface with two coats anticorrosive paint of approved brand and manufactures, including required hire & labour charges, fittings accessories, all complete for all depth, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative. 200mm nominal size dia having minimum wall thickness 5.40 mm
30
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6 / 3.2mm) mild steel threaded and socketed / plain bevel ended pipe type A of required dia, conforming to IS: 8110, of reputed and approved make having wall thickness not less than 5.40mm,painted with outside surface with two coats of anticorrosive bitumestic paint approved brand and manufactures including hire & labor charges, fittings & accessories all complete for all depth, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative 200mm nominal size diameter
10
-
-
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removal as per requirement all complete for bore well of 200mm dia, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tube well as per IS: 2800 (Part I), including necessary bolts & nuts of required size complete, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative. 200mm clamp
1
-
-
Providing and fixing Bail plug/bottom plug of required dia to the bottom of pipe assembly of tube well as per IS: 2800 (Part I), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative. 200mm diameter
1
-
-
Development of tube well in accordance with IS:2800 (Part I) and IS:11189, to establish maximum rate of usable water yield without send content (beyond permissible limit) with require capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tool & accessories etc., complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
10
-
-
Graving packing in tube well construction in accordance with IS: 4097, including providing gravel/fine/ medium/ coarse, in required grading & sizes as per actual requirement, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1.18
-
-
Supplying, erection testing and commissioning of submersible pumping set as per BIS specification No.8034-1989 and IS 9283-1979, the pump motor sets should be capable 1750 lpm against 45mtr head of pumping clear fresh cold water having characteristics as specified in IS. 8034/1989 and IS 9283 / 1979. Each pump motor set cell be supplied with joint free 150m double length 4mm2 PVC. Insulated and PVC sheathed flexible 3 core flat type submersible cable of finolex make and junction box for jointing of submersible cable and submersible pumping, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Supply, erection testing and commissioning of wall mounted electric panel board, fabricated from 16 SWG CRCA sheet duly shouted with suitable angle iron frame work and completely powder coated of approximate size 1350 x 750mm and 400mm deep including cost of 5m long GSL 8 gauge, GL pipe 40mm dia (medium 240mm long and having following items ), main switch 63 amp 1 No (L&T Siemens, ABB), volt meter 100x100range 0to500 volt – (AE / KAPPA / L&T), amp.meter 100x100mm range 0to 100 volt – (AE / KAPPA / L&T), CT-100 - (AE / KAPPA / L&T), VSS & ASS 1 No of approved make, Motor starter, star delta 1 No (L&T simens, AAB), capacity KVAR as per site requirement, indicating lamp one set, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Supplying and Fixing following CI Special, sluice valves with wheel, non return wolves with G.M. flap including cost of jointing materials excavation, laying refilling including making adequate supports of masonry/ concrete/ steel for delivering pipe from submersible pump set up to 1.5 meter outside the outer wall of pump chamber detail of pie and special CI/DF bends. reducers, tapers, tees ,tail peace blank flange etc. up to 500mm (ISI marked) 40kg, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
40
-
-
Earthing with GI earth pipe 4.5m long 40mm dia masonry enclosure & 4mmdia G.I. pipe from earth electrode, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Making 1.2m x 1.2m or 1.5m dia cement concrete platform (1:3:6) with stone chips 10cm thick over a brick flat soling and top finished with 12mm thick cement plaster (1:4) and neat cement punning including providing raised edging 7.5 cm at the periphery making outlet including making drain 1.00m length having 15cm.water way with above specification, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
1
-
-
Bank Protection Works (Revetment)
-
-
-
Earth work in surface excavation not exceeding 30 cm depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5m,disposed soil to be leveled and neatly dressed, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative - All kind of soil
1632.9
-
-
All kinds of soil extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth up to 1.5m)
90
-
-
Providing and making gabion structure with mechanically wovan double twisted hexagonal shaped wire mesh gabion Boxes as per IS 16014:2012, MoRTH Clause 2500, of require size, mesh type 10x12 (D=100mm with tolerance of +2%) Zinc + PVC coated, mesh wire diameter 2.2 / 3.2 mechanically edged / selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mash perpendicular to twist, tying with lacing wire of diameter 2.2/3.2 (ID/OD), supplied @ 3% by weight of gabion boxes, filled with boulders with least dimension of 200mm, complete in all respect as per drawing and directions of EIC
360
-
-
Dry stone pitching 2 layers of 22.5 cm thick including supplies of stone and preparing surface, all complete as per direction of EIC
1632.9
-
-
Providing and laying APP (Atactic polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 liter/sqm by the same membrane manufacture of density at 25 degree celsius, 0.87-0.89 Kg/litre and viscosity 70-160cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameter of the membrane shall be as under joint strength in longitudinal and transverse direction at 23 degree celsius as 650/450N /5cm tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane shall be up to -2 degree celsius when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacture of membrane of 3 mm thick. Extra for covering top of membrane with Geotextile, 120gsm non-woven, 100% polyester of thickness 1 to 1.25 mm bonded to membrane with intermittent touch by heating the membrane by Butane torch as per manufactures recommendation.
1872.9
-
-
Extra for surface dressing and anchoring etc.
1
-
-
Horticulture works
-
-
-
Trenching in Ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling with in a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or /and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
102
-
-
Supply and stacking of good earth at site including royalty and carriage up to 5 km complete (earth measured in stacks will be reduced by 20% for payment), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
102
-
-
Supply and stacking at site dump manure from approved source, including carriage up to 5 km complete (manure measured in stacks will be reduce by 8% for payment), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative: Screened through sieve of I.S. designation 16 mm
25.5
-
-
Spreading of sludge farm yard manure or / and good earth (spreading of sludge farm yard manure or/and good earth in required thickness) (cost of sludge, farm yard manure or / and good earth to be paid separately), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
127.5
-
-
Making lawns including ploughing and dragging with ‘Swagha’ Breaking of Clod (making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs greass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
100
-
-
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
340
-
-
Fine dressing the ground
340
-
-
Mixing earth and sludge or manure and the required proportion specified or directed by the EIC
127.5
-
-
Grassing With ‘Doobs’ grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed in rows 15 cm apart in either direction
100
-
-
Planting of trees and their maintenance for one year (Planting of trees by the road side (Avenue trees) in 0.60m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
18
-
-
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure of sludge on the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20%: 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with the leads and lifts (cist of manure, sludge or extra good earth if needed to be paid for separately): Holes 60 cm diameter and 60cm deep
260
-
-
Supply of Botanical Trees
-
-
-
Supplying and stacking of Pongamia glabra (Papri) plant of height 120-135 cm. in big poly bag of size 25 cm, complete in all respects as per directions of EIC and / or his representative
1
-
-
Nauclea cadamba (Kadam) of plants height 150-165 cm. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
1
-
-
Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
1
-
-
Supply and stacking of Samanea saman (rain tree) plant of height 50.00 to 80.00 feet. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
2
-
-
Supply and stacking of Mimusops elengi (Maulsri) plant of height 180-190cm, well developed with thick stem in big in big size HDPE bag, complete in all respects as per directions of EIC and / or his representative
2
-
-
Supply and stacking of Dillenia Indica (Elephanta apple) plant of height 150 cm. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
1
-
-
Supply and stacking of alstonia scholaris (scholaris tree) plant of height 150 cm. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
2
-
-
Supply and stacking of plumberia longifolia (ashoka) plant of height 150 cm. in big poly bag of plants size 25cm, complete in all respect as per directions of EIC and / or his representative
3
-
-
Supply and stacking of Plumeria alba dwarf plant dwarf of height 90-105cm. with 3-4 branches and thick stem in big size HDPE bag, complete in all respect as per directions of EIC and / or his representative
3
-
-
Supply and stacking of Plumeria rubra plant of height 120-150 cm with 3-4 branches and thick stem in big size HDPE bag, complete in all respects as per directions of EIC and / or his representative
2
-
-
Supply of Botanical Shrubs
-
-
-
Supply and stacking of Plant Ficus blackii (F.vivion)(bushy) of height 150-165 cm. with 3-4 branches and thick stem in big size HDPE bag, complete in all respects as per directions of EIC and / or his representative
38
-
-
Supply and stacking of Plant Murreya exotica of height 45-60cm. in big poly bag of plants size 15cm, complete in all respects as per directions of EIC and / or his representative
45
-
-
Supply and stacking of Plant Ixora coccinea of height 45-60cm in big poly bag of plants size 15cm, complete in all respects as per directions of EIC and / or his representative
106
-
-
Supply and stacking of Plant Mussaendra of height 45-60cm. in big poly bag of plants size 15cm, complete in all respects as per directions of EIC and / or his representative
45
-
-
Supply and stacking of Plant Beloperone guttata of height 30-45 cm. in big poly bag of plants size 15cm, complete in all respects as per directions of EIC and / or his representative
25
-
-
Supply of Ground Covers
-
-
-
Providing and Displaying of Wedelia Trilobata plant of height 15 cm to 20cm, full of branches and follage in 15cm size of Earthen Pot / Plastic Pot, complete in all respects as per directions of EIC and / or his representative
425
-
-
Providing and Displaying of Ophiopogon jaburan (variegated) plant, full of variegated leaves in Earthen Pot/ Plastic Pot, complete in all respects as per directions of EIC and / or his representative
283
-
-
Providing and Displaying of Ophiopogon plant, Black full of leaves in 20cm size of Earthen Pot/ Plastic Pot, complete in all respects as per directions of EIC and / or his representative
425
-
-
Providing and Displaying of Dianella variegated plant, Black full of leaves in 20cm size of Earthen Pot/ Plastic Pot, complete in all respects as per directions of EIC and / or his representative
283
-
-
Providing and Displaying of Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy follage in 25cm size of Earthen Pot/ Plastic Pot, complete in all respects as per directions of EIC and / or his representative
283
-
-
External Electric Works
-
-
-
Supplying, installation, testing and commissioning of 11/0.4KV 315KVA compact sub-station with APFC panel as detail below:- HT switchgear (Compact switchgear) 11kV, 630A, 21KA for 3 Sec, SF6 insulated non-extensible compact switchgear consisting of Two Nos. Fixed Manual Load Break Switch and One No. fixed manual Vacuum circuit breaker in SF6 with insulted stainless steel enclosure, with series trip, self-microprocessor based numerical relay for over current and earth fault (IDMTL + Inst) protection. Interconnection (or equivalent as approved by the EIC) between HT switchgear and transformer shall be using 1Cx2x95 sq.mm Aluminium unarmored XLPE cable transformer rating 315kVA, 11/0.433 kv, Dyn11 with off circuit tap of rating +5 to -5 @ 2.5% (Oil Type) - Danish kotsons / Nucon (Dry Type) - Voltamp / Danish / Raychem / ABB (Case to case) LT Switchboard, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works (Sub-station) 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Erection of RCC / PCC pole strut in brick and ramming the foundation including excavation and refilling and secured with holding clamps nuts and bolts etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009 & Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying & erection of stay set complete with stay rod, anchor plate 7/4 dia Gl stay wire etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying & erection of channel iron 100x50x125mm having 7.9 kg/m cross arm 4 for overhead line complete with clamps etc. as directed, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
12
-
-
Supplying & Erection of 100mm x 65mm pin insulator complete nuts etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
18
-
-
Supplying & erection of galvanized D iron Clamps complete with shackle insulator screw etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
24
-
-
Supplying & erection of all aluminum conductor steel reinforced of size 7x3.99 mm dia as required (303 Kg/Km), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
121
-
-
Providing & fixing 50mmx5.6mtr G.I Pipe (including accessories) 50mmx50mmx6 mm angle iron cross arm, M.S iron bends with 7x3.35 sq.mm Gl stay wire for house service connection, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Installation of earthing station including all accessories having locking arrangement and 20mm dia GI pipe, watering Pipe, with nuts, bolts etc. but without coke etc. with 600mmx600mmx3mm thick (10.5 Approx) copper earth plate, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Supplying & laying 8 SWG copper wire at 0.50 m below GL for conductor earth electrode including soldering excavation etc., complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
50
-
-
Internal Street Light
-
-
-
Supply with fitting and fixing 50 mm dia 2440 mm height 4-in-one combination integrated with acrylic diffusers, translucent top bottom, clear, black powder painted finish tubular pole. The pole is made of Gl tube radiating for specially designed cylindrical pedestal block with built in pre-cable controls as service door. The pole is welded with circular Gl base plate. The pole is design for 4 nos. of 11W/18W CFL lamp and suitable for operation on 240 V 50 HZ single phase AC supply. The pole is to be fitted on 1:3:6 PCC pole foundation of size 300mmx300mmx1200mm with grating nuts & bolts (metal coats make) - King Cobra Model or equivalent, complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009 & Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
10
-
-
Supplying & erection of channel iron 75x40x125 mm having 5.7 Kb/m cross arm for 2 wire overhead Line complete with bolts, nuts etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
10
-
-
Supplying & erection of 100mm x65 mm pin insulator complete etc. as required
20
-
-
Supplying & erection of all aluminum conductor steel reinforced (ACSR) of size 7/4.22 mm dia as required (399 Kg/Km), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
120
-
-
Supplying & Fixing 19 mm dia GL pipe 1.3m length pipe (Tata light galvanized) for street light bracket and 1.5sq.mm PVC wiring as required (Plaza Make), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
10
-
-
Supplying & Fixing 18 SW sheet steel metal boxes of 200x250x60 mm fitted with suitable phenolic laminated sheet cover in front including painting etc. as required in surface wiring system, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
10
-
-
Supplying & Fixing single pole 10Ka 240/415 V 50Hz MCB of the following capacity with complete with necessary connection as specified (Box Type), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
10
-
-
Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor / wall mounting compartmentalized panel board of size 1.25mx0.6mx0.40m made of 16 SWG1.66 m thick C.R. sheet and 35mmx 35mmx5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1:3:6 PCC foundation and brick soling/ grouting etc. complete neatly wiring done with provision for one no. 125/160 4pole MCCB or Switch fuse unit as incomer as provision for 2 nos. Dp or TPN outgoing. confirming to IP 43 protection comprising of the following electrical items:
1. 20mm x 3mm 4 strip copper Bus- Bar 0.5M Length each
2. Digital 3 phases voltmeter accuracy class 0.5-1 no
3. Digital 3 phases Ammeter accuracy class 0.5-1 no
4. Pilot lamp with integral ckt LED 110-230 (Red, Yellow, & Blue - 3 nos.
5. Voltmeter & Ammeter Selector Switch - 2 nos.
6. 2 A Slide fuse unit – 3 nos.,
complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Supplying & laying of following size solid aluminum conductor up to 10sq mm balance stranded conductor, XLPE insulated , cores laid up, PVC tape inner sheathed, Armour (aluminum for single core up to 70sq mm balance aluminum strip, galvanized for cables up to 2x10 sq.mm, 3x10mm,4x6sq.mm balance all galvanized steel strip), extruded PVC type ST2 sheathed, 650/1100v grade as per IS 7908(Part1) 1988, LT armored U.G. cable laid in pucca flooring, road crossing as per site requirement and partially in air to connection as approved by the EIC. The control Switch through medium duty G.I. pipe (Tata / Nezone make or equivalent as approved by the EIC (Nicco / Havells /RPG / CCI / Polycab / Gloster / Finolex make) bend and socket including excavation and refilling the trench and making good damage done, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative. 10.00 Sq.mm 4 Core U.G. cable in 40mm diameter medium duty G.I. pipe
80
-
-
Supplying including installation, connection, testing and commissioning of Jet Pump Set (Horizontal). 1.5 HP single phase motor jet pump set (Horizontal (Crompton/greaves /Aquatic/CRI/V-Guard make) 2900 rpm with DOL starter (Crompton Greaves/ control and switch gear/ BCH/ L & T/ Siemens Make), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Supplying including installation, testing and commissioning of Air/Water cooled diesel generator set couple to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8 p.f.(la mounted on a 1) M.S. fabricated bases frame) 2) M.S. fuel tank of required capacity. 3) first fill of lube oil. 4) AMF Control Panel 5) Suitable batteries with lead 6) Acoustic enclosure complete with all accessories conforming to IS comprising the technical as per manufacture (Range from 5 KVA to 625 KV, Kirloskar Green/bliss, Leyland, Volvo PENTA,PERKINSON, Mahindra Greaves Escort Engine & Kirloskar, Stamford, Leroy somer or equivalent alternator.50 3 3980x1240x1680 1870 Kg A/C, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
1
-
-
Load security charge for releasing Load to ASEB for 20 KW load, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
1
-
-
Installation of backup generator as directed / requirement, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
1
-
-
Internal Electric Works
-
-
-
Wiring for light/fan/call bell point with 2x1.5 sq.mm P.V.C. insulated single core unsheathed industrial (Multistoried) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel/ Nicco/Anchor or equivalent make as approved by the EIC) in surface system, including 6 Amp flush type switch / bell push (Anchor penta/ gold medal / havells or equivalent make as approved by the EIC). GI / MS switch board (ISI) marked half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor /Gold medal / Kolor kany. Kom / Havells or equivalent make (as approved by the EIC), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
3
-
-
Wiring for 5/6 pin 16 Amps plug point with 4 sq.mm P.V.C. insulated single core unsheathed industrial (Multi strand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex / RR Kabel / Nicco/Anchor or equivalent make as approved by the EIC) with flat 19 mm ISI marked casing and capping (AKG/ precision/presto plast/polycab/MW or equivalent make as approved EIC) in surface system including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta/ gold medal/kolor kany.com/havells or equivalent make as approved by the EIC), GI/MS switch board (ISI marked) with phenolic laminated sheet cover earth continuity with 2.5 sq.mm cable to the 3rd pin of the socket as required complete. (extra long point up to 15mm), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying with fitting & fixing of the following road lighting luminaries complete in the existing pole with high power LED and extendable up to with unique peanuts lens to ensure uniform distribution including making necessary connection as approved by the EIC with 2x2.50 sq.mm F.R. multi strand and P.V.C insulated single core cooper cable, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
48
-
-
Supplying with fitting & fixing of CFL/florescent luminaries completed will all accessories such as ballast, starter etc. directly on wall celling including connection with 1.5 sq.mm P.V.C insulated S.C. cooper conductor, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative. Striplite luminaries complete with electronic ballast and decorative end cap with 1x36/40 watt fluorescent tube.(Crompton greaves make)Model-DSG1214EB ENERGYGOLD with power lux lamp or equivalent (Equivalent will be selected by the EIC considering the mother item rate) Philips/Wiproc /Bajaj/Havells/HPL/Solar/ jaquar make.
10
-
-
Wining for drawing sub-main line with P.V.C insulated single core unsheathed industrial (Multistrand) Cable FR confirming IS-694 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/Anchor or equivalent make as approved by the EIC) in surface flat ISI marked casing ‘n’ capping (AKG/ precision/presto plast/polycab/MW or equivalent make as approved by the EIC) system including earth continuity, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
With 3x6sq.mm + earth continuity with 2x6 4 sq.mm. cable in flat 25 mm ISI marked casing ‘n’ capping system.
85
-
-
Supplying including fixing of following A.C ceiling Fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the EIC), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative (Without Regulator).
Premium model 1400mm Sweep (ORIENT PSPO make) / Premium model 1400 mm Sweep SS-390 Deco. Hevells make)
20
-
-
Supplying including fixing of following A.C exhaust fan in the existing hole on the wall of following sweeps with making necessary connection, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative. Trans air 300 mm sweep (Compton make)
7
-
-
Wiring for light/fan/call bell point with 3x1.5 sq.mm P.V.C. insulated single core unsheathed industrial (Multi strand) Cable FR confirming IS-694 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the EIC) in surface flat ISI marked casing ‘n’ capping (AKG/ precision/presto Plast/polycab/MW or equivalent make as approved by the EIC) in surface system including 6 Amp flush type switch/bell push (Anchor penta/ gold medal/kolor kany.com/havells or equivalent make as approved by the EIC), GI/MS switch board (I.S.I marked) with phenolic laminated sheet cover, ceiling rose etc., complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
14
-
-
Supplying, erection and commissioning of the following specification as per IS:2713: 410 SP hot dip galvanized steel tabular pole manufacturing out from electrically welded in 3 (three section having a base plate including providing all required building materials as directed and specified by the EIC (BANSAL/SRP/Valmont/PARUTHI ENGR make), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative 410 SP 43 length of pole =10.00 metre., length of sections, Bottom = 5.20 M, Middle=2.40 M, Top=2.40 M, out site dia & Thickness Bottom,=165.10x4.50mm,Middle=138.70x4.50mm,Top=114.3x3.65mm
6
-
-
Supplying and fixing 18 SWG sheet metal boxes of 200x250x60 mm deep filled with suitable size phenolic laminated sheet covered in front including painting etc. as required in surface wiring system, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying will filling and fixing single pole 10 KA 240/415 V 50 Hz MCB, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying and fixing 19 mm dia G.I 3 mtr. Length pipe for street light water tight bracket including bending to shape and wiring with 1.5 sq.mm WP / PVC wire etc, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying and fixing of jaguar or equivalent Philips/Wipro LED wall light fitting and complete with shade, back plate including connection cable etc. as required –LED Bulk Head 8W, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
14
-
-
Wiring for 5 a pin 6 Amps plug point with 1.5 sq.mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt.) with flat 19 mm ISI marked casing n capping (AKG/ precision/presto plast / polycab / MW or equivalent make as approved by the deptt. in surface system including 5 pin 6 Amps flush type socket outlets and 6 amps flush type switch (Anchor penta/ gold medal/kolor/ havells or equivalent make as approved by the EIC), GI/MS switch board (I.S.I marked) with phenolic laminated sheet cover earth continuity with 2.5 sq.mm cable to 3rd pin of the socket etc as required complete. When placed elsewhere medium point up to 6.00 metre. Length, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Wiring for drawing sub-main line with P.V.C insulated single core unsheathed industrial (Multistrand) Cable FR confirming IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the EIC) in surface flat ISI marked casing ‘N’ capping (AKG/ precision/presto plast/polycab/MW or equivalent make as approved by the EIC system including earth continuity. With 3x6sq.mm.+ earth continuity with 2x6 4 sq mm. cable in flat 19 mm ISI marked casing N’ capping system, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
20
-
-
Supplying with installation, testing and commissioning of Hi—wall 4 STAR rating non-deducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative. 2 Ton capacity (Carrier / Curve / Voltas make) Model Platinum 4S
2
-
-
Supplying including Fitting fixing of tube light complete with all accessories, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
46
-
-
Supplying including Fitting fixing of hanging light complete with all accessories, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
16
-
-
Solar Mast Light System
-
-
-
Supply, transportation, installation, testing and commissioning at project site, 16 meter Solar High Mast with manual winch, 4 nos of 45W LED flood light and 4 nos of 100W Solar panel. a) Construction of suitable shallow foundation with 1:2:4 concrete for the High Mast considering the safe soil bearing capacity at the site as 10T/sq.m at 2 Mtr depth with all materials and labour. b) Mast to be suitable for mounting of 4 nos of 45W LED flood light and 4 nos of 100W solar panel suitable to withstand against the maximum wind speed (IS 875-1987) of: 150 km/hr. Mast to be galvanized (as per BS EN ISO 1461) of length 75350 mm at top and 84650 mm at bottom and thickness of 3mm at top and 4mm at bottom, base plate of thickness 25mm, foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates (PCD: 460mm, length: 850mm and dia of 350mm at top and 150mm at bottom), GI Pipe earthing for High Mast with 3 meter long 50mm diameter pipe with 25x6 mm flats with all materials and labor erection. c) 45W Solar LED floodlight with in-built Li-Ion battery. LED color: Pure white with Lumen output of 120 per lumen. Operating temperature of -20 to 50 c with Power factor of 0.95. 14.8V, 40 Ah inbuilt Li-Ion battery with in-built MPPT charge controller. Automatic ON / OFF control system, automatic dimming control system and operational Bluetooth communication. d) Solar Panel of 12V, 100W solar panel. 4nos per high mast with dimension of approx. 1055mm x 655mm (LXW) Complete in all respect conforming to the site requirement and as per directions of EIC and / or his representative.
1
-
-
Fire Fighting Equipment
-
-
-
Supply, Installation, fixing of Dry Chemical Powder fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge confirming to IS:4947 with ISI mark, Powder will be confirming to IS:4308 with ISI mark (5 Kg) BRAND: Firestop / Friend / Fire Shield, complete in all respects as per directions of EIC and / or his representative
15
-
-
Supply, Installation, fixing of Dry Chemical Powder fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge confirming to IS: 4947 with ISI mark, Powder confirming to IS:4308 with ISI mark (Extinguisher will be trolley mounted). (50Kg), complete in all respects as per directions of EIC and / or his representative. BRAND : Firestop / Friend / Fire Shield
1
-
-
Supply, Installation, fixing of Mechanical Foam (AFFF) fire Extinguisher confirming to IS: 10204 with ISI mark and CO2 Cartridge confirming to IS:4947 with ISI mark, (AFFF) confirming to IS:4989 with ISI mark.(50 LITERS), complete in all respects as per directions of EIC and / or his representative. Brand : Firestop / Friend / Fire Shield
3
-
-
Renovation of the existing shore facilities at Karimganj Inland Water Transport Terminal in the state of Assam on river Barak (NW-16)
-
-
-
Civil Works
-
-
-
Jungle Clearance
Jungle Clearance including cutting bamboo and trees below 500 mm girth and removing the same outside the limit as directed (Medium Jungle), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
3304
-
-
Earthwork
-
-
-
Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts including bailing out water where necessary, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 78 m3
78
-
-
Earth / sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties & taxes as may be necessary, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 50.60 m3
50.6
-
-
Steel Reinforcement
Steel reinforcement for R.C.C. work including straightening, cutting, bending placing in position and binding all complete up to plinth level - Hot rolled deformed bars, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Main Gate including Board – 0.16 Tonnes
(ii) Boundary Wall with barbed fencing – 2.84 Tonnes
3
-
-
Concrete
-
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for R.C.C work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering shuttering, finishing and reinforcement, including admixtures in recommended proportion as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of EIC. All works up to plinth level, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Main Gate including Board – 0.71 m3
(ii) Boundary Wall with barbed fencing – 20.50 m3
21.2
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for R.C.C work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportion as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of EIC. All works above plinth level up to floor V level, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Main Gate including Board – 0.63 m3
(ii) Boundary Wall with barbed fencing – 3.17 m3
3.81
-
-
Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 6.90 m3
6.9
-
-
Brick work with common burnt clay machine molded perforated bricks of class designation 12.5 conforming to IS 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement :6 coarse sand) with F.P.S. (non-modular) bricks, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 41.40 m3
41.4
-
-
Plastering 15 mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) on the rough side of single or half brick wall, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 1805 m2
(ii) Godown – 3400 m2
(iii) Security Room – 400 m2
(iv) Toilet – 600 m2
(v) Boundary Wall with barbed fencing – 360 m2
6565
-
-
Painting
-
-
-
Removing dry or oil bound distemper by washing & scraping and sand papering the wall surface smooth including necessary repairs to scratches, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 1805 m2
(ii) Godown – 4000 m2
(iii) Security Room – 400 m2
6205
-
-
Applying one coat of distemper primer of approved brand and manufacturer on wall surface after thoroughly brushing the surfaces free from mortar droppings and other foreign matter & including preparing the surface even and sand papered smooth, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 1805 m2
(ii) Godown – 4000 m2
(iii) Security Room – 400 m2
6205
-
-
Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on new wall surface to give an even shade, over and including priming coat of white primer after thoroughly brushing the surface free from mortar droppings and other foreign matter and including preparing surface even and sand paper smooth, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 1805 m2
(ii) Godown – 4000 m2
(iii) Security Room – 400 m2
6205
-
-
Applying one self-priming coat of acrylic emulsion paint of approved brand, thinning by adding water as per specification of manufacturer over freshly plastered wall surface after thoroughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 1620 m2
1620
-
-
Finishing wall with two coats of acrylic emulsion exterior coatings of approved brand of required shade by thinning 1 litre of paint with 750ml of water to give an even shade after thoroughly brooming the surfaces to remove all dirt and remains of loose powered materials, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 1620 m2
1620
-
-
Roofing
-
-
-
Dismantling all types of corrugated / trapezoidal sheet roofing including ridges, hips, valleys etc. and stacking the materials as directed by the EIC for all levels, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Godown – 2000 m2
(ii) Toilet – 580 m2
2580
-
-
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275 gm / m2, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Godown – 2000 m2
(ii) Toilet – 580 m2
2580
-
-
Providing ridges or hips of width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm / m2, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative Godown – 86 Running Meter
86
-
-
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40 x 3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative - 0.63mm thick with zinc coating not less than 275 gm / m2.
Godown – 172 Running Meter
172
-
-
Labour for fitting and fixing galvanized corrugated iron roofing including supplying and fixing with new galvanized screw, J hook, bolts and nuts, washer etc., complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Godown – 2000 m2
(ii) Toilet – 580 m2
2580
-
-
Labour for taking out and refitting galvanized ridging including supplying and fixing necessary galvanized screw, bolts and nuts, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Godown – 86 Running Meter
86
-
-
Roof Treatment
Grading roof for water proofing treatment with cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 182 m2
(ii) Security Room – 75 m2
257
-
-
Rolling Shutter (7 Nos.)
Providing and fixing rolling shutters of approved make and made of 80mm wide M.S. laths interlocked together through their entire length and jointed together at the ends by end-locks mounted on specially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push-pull operation complete including cost of wire, spring and hood cover for the shutters, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Godown – 168 m2
168
-
-
Painting of Roof Truss & Rolling Shutter
Finishing with Epoxy paint (2 or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface etc., complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Godown – 5160 m2
5160
-
-
Doors & windows with chowkaths (18 No. Doors & 15 No. Windows)
-
-
-
Providing wood work in frame (chowkaths) of doors, windows, clearstory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40 mm x 3 mm x 250 mm) as per design embedded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C. and masonry with Sal wood, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 1.04 m3
(ii) Godown – 0.46 m3
(iii) Security Room – 0.10 m3
(iv) Toilet – 0.05 m3
1.65
-
-
Providing fitting and fixing 1/3 paneled 2/3 glazed wooden shutters for doors / windows including oxidized iron butt hinges (100 mm x 75 mm x 3.55 mm) with necessary screws including glass panes (other fittings to be measured and paid separately) with Teak wood / Sissu Wood with 40 mm thick, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 49.32 m2
(ii) Godown – 21.60 m2
(iii) Security Room – 4.68 m2
Toilet – 2.16 m2
77.76
-
-
Window Glass Fitting
Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25mm to 40mm thick: Float glass panes, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 3.60 m2
(ii) Godown – 7.20 m2
(iii) Security Room – 1.80 m2
(iv) Toilet – 1.80 m2
14.4
-
-
Grill Work
Providing and fixing M.S, grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 400 Kg
(ii) Godown – 800 Kg
(iii) Security Room – 100 Kg
(iv) Toilet – 100 Kg
1400
-
-
Tiles Work
-
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colors, shades except burgundy, bottle green, black of any size as EIC, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and joining with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 150 m2
150
-
-
Providing and laying Ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red, Brown, laid on 30 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 200 m2
200
-
-
Damp Proof Course Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 13.80 m2
13.8
-
-
Barbed Fencing (with Concertina Coil 3 Coils/M length)
-
-
-
Supplying at site Angle iron post & sturt of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes up to 10mm dia etc., complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 61.20 Kg
61.2
-
-
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I staples, turn buckles etc. complete. (Cost of posts, struts, earthwork and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used with G.I. barbed wire, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Boundary Wall with barbed fencing – 260 Running Meter
260
-
-
Plumbing Work
-
-
-
Removing and refilling old G. I. Pipes of 15 mm dia with new socket, bend, tee etc. complete including stacking the old serviceable materials at safe place as directed, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 150 Running Meter
(ii) Toilet – 113 Running Meter
(iii) Main Gate – 49 Running Meter
(iv) Boundary Wall – 38 Running Meter
350
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints - External work 32 mm, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 40 Running Meter
40
-
-
Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 Degree Celsius, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required e.g. elbows, tees, reduces, couplers & connections etc., with trenching, refilling and testing of joints, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 272 Running Meter
272
-
-
Providing and fixing Polyethelene-Aluminium- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS-15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 Degree Celsius, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e. g. elbows, tees, reducers, couplers & connectors etc. with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. Internal work – Exposed on wall (20 mm OD) pipe, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
(i) Office – 48 Running Meter
(ii) Toilet – 21 Running Meter
69
-
-
Toilet Fittings
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with special of standard make and mosquito proof coupling of approved municipal painting of fittings and brackets, cutting and making good the walls and floors wherever required: - W.C. pan with ISI marked white solid plastic seat and lid, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 5 Nos.
5
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580 x 380 x 350 mm with white PVC automatic flushing cistern, with fittings pipe, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS: 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :- Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 4 Nos.
4
-
-
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required - White glazed fire clay kitchen sink of size 600 x 50 x 250 mm, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 1 No.
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require - White Vitreous China wash basin size 630 x 450 mm with a pair of 15mm C.P. brass pillar taps, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 4 Nos.
4
-
-
Other fixtures in terms of clause 17.22, 17.28, 17.29, 17.32, 17.34 & 17.35 of DSR, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 4 Nos.
4
-
-
2 Nos. of 3000 litres water tank for storage
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Office – 6000 Ltr
6000
-
-
Toilet Doors
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
Toilet – 14.70 m2
14.7
-
-
Gate (6X3), 40mm thick (Unit wt. 7850kg/m3) with Post and Sign Board
Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20 mm dia M.S. bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200 mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100 mm above the middle and top flat is to be flattened and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos. (minimum) strong iron hinges of M.S. bars and flat of same sizes on each leaf to be embedded in C.C. brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (No Separate payment will be made for posts), complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
700
-
-
Main Gate sign Boards
Provision of Retro Reflective Signage of ACP 3mm, Base of 3M HIP Sheet/Pasting of 3M Electrocute Matter Base-ACP 3mm First Layer- Avery/3M HIP Sheet Second Layer Electrocute HIP type IV sheet/ECF Overlay over the MS Frame for mounting Sign plates Top and Bottom of MS Pipe3” square pipe; 2” square pipe. MS Fabrication using Tata/Jinda/Peakash/Bhushan/Apollo Pipe- 3” & 2” Sq. Pipe duly sanded, cleaned Primer and Epoxy Paint-MRF/Epoxy Primer – MRF and Aluminum Paint-ASPA, complete in all respects in following building / facilities as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Internal Roads (7 m wide) – 40 m
-
-
-
Construction of Sub-grade and earthen shoulders / granular sub-base / reinforcement / shuttering / concrete payment / cement plaster / ICBP with approved materials with all lifts and leads, transporting to site, spreading, grading to required slope and compacting (including compensation of earth).(including cost of testing at site and laboratory as directed by the EIC.) (150mm thick), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
50.4
-
-
Construction of granular sub base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix method with rotavator at OMC, and compacting with vibratory roller to achieve the desire density, complete as per clause 401 of MoRTH Specification (with an initial lead of 5 km) (Including of cost of testing of material at site and laboratory as directed by the deptt.) (150mm thick), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
50.4
-
-
Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. code for R.C.C. work / R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, support chair, spacers, etc., complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
30.24
-
-
Providing from work of ordinary timber planking so as to give a rough finish including, centering, shuttering, strutting and propping etc. and removal of the same for in-situ reinforced concrete and plain concrete work in R.C.C. approach road, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
336
-
-
Providing and laying controlled cement concrete pavement of approved grade with 20mm downgraded stone aggregate over a prepared sub-base including dewatering if necessary, spread, compact and finished in a continues operation including provision of construction and expansion joints / plasticiser and curing compound of approved make and hardener of approved make; finishing to lines and grades and curing as specified and directed complete (150mm thick) M30 grade concrete, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
50.4
-
-
Drains
-
-
-
Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means over areas including disposal of excavated earth, lead up to 50m and lift upto 1.5m, disposed earth to be leveled and neatly dressed, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative. All Kinds of Soil
95.4
-
-
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level: 1:3:6 (1 Cement; 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) (50mm thk), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
5.3
-
-
Providing and laying in position specified grade of RCC, excluding the cost of centering, shuttering finishing and reinforcement – All work up to plinth level: 1:2:4 (1 Cement; 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
15.9
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
2.29
-
-
Borewell
-
-
-
Boring/ drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting sample from different strata, preparing and submitting strata chart/bore log/ including hire & running charges of all equipments, tools plants & machineries required for the job, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative, up to 90 metre depth below ground level. All types of soil 300 mm diameter
30
-
-
Boring/ drilling bore well of required dia for casing/strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting sample from different strata, preparing and submitting strata chart/bore log/ including hire & running charges of all equipments, tools plants & machineries required for the job, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative, upto 90 metre depth below ground level. Rocky strata including Boulders 200 mm diameter
30
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of require dia conforming to IS 4270, of reputed & approved make including painted with outside surface with two coats anticorrosive paint of approved brand and manufactures, including required hire & labour charges, fittings accessories, all complete for all depth as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative. 200mm nominal size dia having minimum wall thickness 5.40mm
30
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2mm) mild steel threaded and socketed/plain bevel ended pipe type A of required diameter, conforming to IS: 8110, of reputed and approved make having wall thickness not less than 5.40mm,painted with outside surface with two coats of anticorrosive bitumestic paint approved brand and manufactures including hire & labour charges, fittings & accessories all complete for all depth, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative - 200mm nominal size diameter
10
-
-
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removal as per requirement all complete for bore well of 200mm dia, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tube well as per IS: 2800 (Part I), including necessary bolts & nuts of required size complete, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative. 200mm clamp
1
-
-
Providing and fixing Bail plug/bottom plug of required dia to the bottom of pipe assembly of tube well as per IS: 2800 (Part I), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative. 200mm dia
1
-
-
Development of tube well in accordance with IS:2800 (Part I) and IS:11189, to establish maximum rate of usable water yield without send content (beyond permissible limit) with require capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tool & accessories etc., complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
10
-
-
Graving packing in tube well construction in accordance with IS: 4097, including providing gravel/fine/ medium/ coarse, in required grading & sizes as per actual requirement, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1.18
-
-
Supplying, erection testing and commissioning of submersible pumping set as per BIS specification No.8034-1989 and IS 9283-1979, the pump motor sets should be capable 1750 lpm against 45mtr head of pumping clear fresh cold water having characteristics as specified in IS. 8034/1989 and IS 9283/1979. Each pump motor set cell be supplied with joint free 150m double length 4mm2 PVC. Insulated and PVC sheathed flexible 3 core flat type submersible cable of finolex make and junction box for jointing of submersible cable and submersible pumping, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
1
-
-
Supply, erection testing and commissioning of wall mounted electric panel board, fabricated from 16 SWG CRCA sheet duly shouted with suitable angle iron frame work and completely powder coated of approximate size 1350 x 750mm and 400mm deep including cost of 5m long GSL 8 gauge, GL pipe 40mm dia (medium 240mm long and having following items ), main switch 63 amp 1 No (L&T Siemens, ABB), volt meter 100x100range 0to500 volt –(AE/KAPPA/L&T),amp.meter100x100mm range 0to 100 volt –(AE/KAPPA/L&T), CT-100- (AE/KAPPA/L&T), VSS & ASS 1 No of approved make, Motor starter, star delta 1 No (L&T Siemens, AAB), capacity KVAR as per site requirement, indicating lamp one set, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Supplying and Fixing following CI Special, sluice valves with wheel, non-return wolves with G.M. flap including cost of jointing materials excavation, laying refilling including making adequate supports of masonry/ concrete/ steel for delivering pipe from submersible pump set up to 1.5 meter outside the outer wall of pump chamber detail of pie and special CI/DF bends. reducers, tapers, tees ,tail peace blank flange etc. up to 500mm (ISI marked) 40kg, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
40
-
-
Earthing with GI earth pipe 4.5m long 40mm dia masonry enclosure & 4mmdia G.I. pipe from earth electrode, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
1
-
-
Making 1.2m x 1.2m or 1.5m dia cement concrete platform (1:3:6) with stone chips 10cm thick over a brick flat soling and top finished with 12mm thick cement plaster (1:4) and neat cement punning including providing raised edging 7.5 cm at the periphery making outlet including making drain 1.00m length having 15cm.water way with above specification, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
1
-
-
Bank Protection Works (Revetment)
-
-
-
Earth work in surface excavation not exceeding 30 cm depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5m,disposed soil to be leveled and neatly dressed, complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative - All kind of soil
1632.9
-
-
All kinds of soil extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth up to 1.5m)
90
-
-
Providing and making gabion structure with mechanically wovan double twisted hexagonal shaped wire mesh gabion Boxes as per is 16014:2012,MoRTH Clause 2500, of require size, mesh type 10x12 (D=100mm with tolerance of +2%) Zinc+ PVC coated, mesh wire diameter 2.2/3.2 mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 10 numbers of openings per meter of mash perpendicular to twist, tying with lacing wire of diameter 2.2/3.2 (ID/OD), supplied @ 3% by weight of gabion boxes, filled with boulders with least dimension of 200mm,as per drawing, filled with boulders with least dimension of 200mm, as per drawing, all complete as per direction of EIC.
360
-
-
Dry stone pitching 2 layers of 22.5 cm thick including supplies of stone and preparing surface, all complete as per direction of EIC
1632.9
-
-
Providing and laying APP (Atactic polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25 degree celsius, 0.87-0.89 Kg/litre and viscosity 70-160cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameter of the membrane shall be as under joint strength in longitudinal and transverse direction at 23 degree celsius as 650/450N /5cm tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane shall be up to -2 degree celsius when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done through the authorized applicator of the manufacture of membrane of 3 mm thick. Extra for covering top of membrane with Geotextile, 120gsm non-woven, 100% polyester of thickness 1 to 1.25 mm bonded to membrane with intermittent touch by heating the membrane by Butane torch as per manufactures recommendation.
1872.9
-
-
Extra for surface dressing and anchoring etc.
1
-
-
Horticulture works
-
-
-
Trenching in Ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling with in a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or /and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative
111
-
-
Supply and stacking of good earth at site including royalty and carriage up to 5 km complete (earth measured in stacks will be reduced by 20% for payment), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
111
-
-
Supply and stacking at site dump manure from approved source, including carriage up to 5km complete (manure measured in stacks will be reduce by 8% for payment), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative: Screened through sieve of I.S. designation 16 mm
27.75
-
-
Spreading of sludge farm yard manure or / and good earth (spreading of sludge farm yard manure or/and good earth in required thickness) (cost of sludge, farm yard manure or / and good earth to be paid separately), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
138.75
-
-
Making lawns including ploughing and dragging with ‘Swagha’ Breaking of Clod (making lawns including ploughing and breaking of clod, removal of rubbish, dressing and supplying doobs greass roots and planting at 15 cm apart, including supplying and spreading of farm yard manure at rate of 0.18 cum per 100 sqm), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
40
-
-
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
370
-
-
Fine dressing the ground
370
-
-
Mixing earth and sludge or manure n the required proportion specified or directed by the Engineer-in-charge
138.75
-
-
Grassing With ‘Doobs’ grass including watering and maintenance of the lawn for 30days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed: In rows 15 cm apart in either direction
40
-
-
Planting of trees and their maintenance for one year (Planting of trees by the road side (Avenue trees) in 0.60m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, planting the saplings, backfilling the trench, watering, fixing the tree guard and maintaining the plants for one year), complete in all respects as per Specifications and provisions of CPWD Specifications 2009, relevant IS Code & direction of EIC and / or his representative.
21
-
-
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure of sludge on the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20%: 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with the leads and lifts (cist of manure, sludge or extra good earth if needed to be paid for separately): Holes 60 cm dia, and 60cm deep
434
-
-
Supply of Trees
-
-
-
Supplying and stacking of Pongamia glabra (Papri) plant of height 120-135 cm. in big poly bag of size 25 cm, complete in all respects as per directions of EIC and / or his representative
3
-
-
Nauclea cadamba (Kadam) of plants height 150-165 cm. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
4
-
-
Supply and stacking of Delonix regia (Gulmohar) plant of height 150-165 cm. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
4
-
-
Supply and stacking of Samanea saman (rain tree) plant of height 50.00 to 80.00 feet. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
1
-
-
Supply and stacking of Mimusops elengi (Maulsri) plant of height 180-190cm, well developed with thick stem in big in big size HDPE bag, complete in all respects as per directions of EIC and / or his representative
4
-
-
Supply and stacking of Dillenia Indica (Elephanta apple) plant of height 150 cm. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
4
-
-
Supply and stacking of alstonia scholaris (scholaris tree) plant of height 150 cm. in big poly bag of plants size 25cm, complete in all respects as per directions of EIC and / or his representative
3
-
-
Supply and stacking of plumberia longifolia (ashoka) ) plant of height 150 cm. in big poly bag of plants size 25cm, complete in all respect as per directions of EIC and / or his representative
1
-
-
Supply and stacking of Plumeria alba dwarf plant dwarf of height 90-105cm. with 3-4 branches and thick stem in big size HDPE bag, complete in all respect as per directions of EIC and / or his representative
1
-
-
Supply and stacking of Plumeria rubra plant of height 120-150 cm with 3-4 branches and thick stem in big size HDPE bag, complete in all respects as per directions of EIC and / or his representative
1
-
-
Supply of Shrubs
-
-
-
Supply and stacking of Plant Ficus blackii (F.vivion)(bushy) of height 150-165 cm. with 3-4 branches and thick stem in big size HDPE bag, complete in all respects as per directions of EIC and / or his representative
51
-
-
Supply and stacking of Plant Murreya exotica of height 45-60cm. in big poly bag of plants size 15cm, complete in all respects as per directions of EIC and / or his representative
142
-
-
Supply and stacking of Plant Ixora coccinea of height 45-60cm in big poly bag of plants size 15cm, complete in all respects as per directions of EIC and / or his representative
88
-
-
Supply and stacking of Plant Mussaendra of height 45-60cm. in big poly bag of plants size 15cm, complete in all respects as per directions of EIC and / or his representative
106
-
-
Supply and stacking of Plant Beloperone guttata of height 30-45 cm. in big poly bag of plants size 15cm, complete in all respects as per directions of EIC and / or his representative
47
-
-
Botanical Names – Ground Covers
-
-
-
Providing and Displaying of Wedelia Trilobata plant of height 15 cm to 20cm, full of branches and follage in 15cm size of Earthen Pot / Plastic Pot, complete in all respects as per directions of EIC and / or his representative
566
-
-
Providing and Displaying of Ophiopogon jaburan (variegated) plant, full of variegated leaves in Earthen Pot/ Plastic Pot, complete in all respects as per directions of EIC and / or his representative
566
-
-
Providing and Displaying of Ophiopogon plant, Black full of leaves in 20cm size of Earthen Pot/ Plastic Pot, complete in all respects as per directions of EIC and / or his representative
354
-
-
Providing and Displaying of Dianella variegated plant, Black full of leaves in 20cm size of Earthen Pot/ Plastic Pot, complete in all respects as per directions of EIC and / or his representative
425
-
-
Providing and Displaying of Cuphea chinensis plant of ht. 30-45 cm full of branches and healthy follage in 25cm size of Earthen Pot/ Plastic Pot, complete in all respects as per directions of EIC and / or his representative
425
-
-
External Electric Works
-
-
-
Supplying, installation, testing and commissioning of 11/0.4KV 315KVA compact sub-station with APFC panel as detail below:- HT switchgear (Compact switchgear) 11kV, 630A, 21KA for 3 Sec, SF6 insulated non-extensible compact switchgear consisting of Two Nos. Fixed Manual Load Break Switch and One No. fixed manual Vacuum circuit breaker in SF6 with insulted stainless steel enclosure, with series trip, self-microprocessor based numerical relay for over current and earth fault (IDMTL + Inst) protection. Interconnection (or equivalent as approved by the EIC) between HT switchgear and transformer shall be using 1Cx2x95 sq.mm Aluminum unarmored XLPE cable transformer rating 315kVA, 11/0.433 kv, Dyn11 with off circuit tap of rating +5 to -5 @ 2.5% (Oil Type) - Danish kotsons / Nucon (Dry Type) - Voltamp / Danish / Raychem / ABB (Case to case) LT Switchboard, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works (Sub-station) 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Erection of RCC/PCC pole strut in brick and ramming the foundation including excavation and refilling and secured with holding clamps nuts and bolts etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009 & Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
8
-
-
Supplying & erection of stay set complete with stay rod, anchor plate 7/4 dia Gl stay wire etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
8
-
-
Supplying & erection of channel iron 100x50x125mm having 7.9 kg/m cross arm 4 for overhead line complete with clamps etc., complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
16
-
-
Supplying & Erection of 100mm x 65mm pin insulator complete nuts etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
24
-
-
Supplying & erection of galvanized D iron Clamps complete with shackle insulator screw etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
24
-
-
Supplying & erection of all aluminum conductor steel reinforced of size 7x3.99 mm dia as required (303 Kg/Km), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
121
-
-
Providing & fixing 50mmx5.6mtr G.I Pipe (including accessories) 50mmx50mmx6 mm angle iron cross arm, M.S iron bends with 7x3.35 sq.mm Gl stay wire for house service connection, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Installation of earthing station including all accessories having locking arrangement and 20mm dia GI pipe, watering Pipe, with nuts, bolts etc. but without coke etc. with 600mmx600mmx3mm thick (10.5 Approx) copper earth plate, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Supplying & laying 8 SWG copper wire at 0.50 m below GL for conductor earth electrode including soldering excavation etc., complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
50
-
-
Internal Street Light
-
-
-
Supply with fitting and fixing 50 mm dia 2440 mm height 4-in-one combination integrated with acrylic diffusers, translucent top bottom, clear, black powder painted finish tubular pole. The pole is made of Gl tube radiating for specially designed cylindrical pedestal block with built in pre-cable controls as service door. The pole is welded with circular Gl base plate. The pole is design for 4 nos. of 11W/18W CFL lamp and suitable for operation on 240 V 50 HZ single phase AC supply. The pole is to be fitted on 1:3:6 PCC pole foundation of size 300mmx300mmx1200mm with grating nuts & bolts (metal coats make) - King Cobra Model or equivalent, complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009 & Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
8
-
-
Supplying & erection of channel iron 75x40x125 mm having 5.7 Kb/m cross arm for 2 wire overhead Line complete with bolts, nuts etc. as required, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
8
-
-
Supplying & erection of 100mm x 65 mm pin insulator complete etc. as required
16
-
-
Supplying & erection of all aluminum conductor steel reinforced (ACSR) of size 7/4.22 mm dia as required (399 Kg/Km), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
96
-
-
Supplying & Fixing 19 mm dia GL pipe 1.3m length pipe (Tata light galvanized) for street light bracket and 1.5sq.mm PVC wiring as required (Plaza Make), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
8
-
-
Supplying & Fixing 18 SW sheet steel metal boxes of 200x250x60 mm fitted with suitable phenolic laminated sheet cover in front including painting etc. as required in surface wiring system, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
8
-
-
Supplying & Fixing single pole 10Ka 240/415 V 50Hz MCB of the following capacity with complete with necessary connection as specified (Box Type), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
8
-
-
Supplying including installation, commissioning of vermin and dust proof totally enclosed cubical indoor type floor / wall mounting compartmentalized panel board of size 1.25mx0.6mx0.40m made of 16 SWG1.66 m thick C.R. sheet and 35mmx 35mmx5mm size angle having 4 no legs at the bottom complete painting with 2 coats of Red oxide metal primer and 2 coats of enamel paint. The panel board is to be erected in 1:3:6 PCC foundation and brick soling/ grouting etc. complete neatly wiring done with provision for one no. 125/160 4pole MCCB or Switch fuse unit as incomer as provision for 2 nos. Dp or TPN outgoing. confirming to IP 43 protection comprising of the following electrical items:
1. 20mm x 3mm 4 strip copper Bus- Bar 0.5M Length each
2. Digital 3 phases voltmeter accuracy class 0.5-1 no
3. Digital 3 phases Ammeter accuracy class 0.5-1 no
4. Pilot lamp with integral ckt LED 110-230 (Red, Yellow, & Blue - 3 nos.
5. Voltmeter & Ammeter Selector Switch - 2 nos.
6. 2 A Slide fuse unit – 3 nos.,
complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Supplying & laying of following size solid aluminum conductor up to 10sq mm balance stranded conductor, XLPE insulated , cores laid up, PVC tape inner sheathed, Armour (aluminum for single core upto 70sq mm balance aluminum strip, galvanized for cables up to 2x10 sq.mm, 3x10mm,4x6sq.mm balance all galvanized steel strip), extruded PVC type ST2 sheathed, 650/1100v grade as per IS 7908(Part1) 1988, LT armored U.G. cable laid in pucca flooring, road crossing as per site requirement and partially in air to connection as approved by the EIC. The control Switch through medium duty G.I. pipe (Tata/Nezone make or equivalent as approved by the EIC (Nicco / Havells/RPG /CCI/Polycab/Gloster/Finolex make) bend and socket including excavation and refilling the trench and making good damage done, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
10.00 Sq.mm 4 Core U.G. cable in 40mm dia medium duty G.I. pipe
64
-
-
Supplying including installation, connection, testing and commissioning of JET PUMP SET (HORIZONTAL). 1.5 HP single phase motor jet pump set (Horizontal(Crompton/greaves /Aquatic/CRI/V-Guard make) 2900 rpm with DOL starter (Crompton Greaves/ control and switch gear/ BCH/ L & T/ Siemens Make), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
1
-
-
Supplying including installation, testing and commissioning of Air/Water cooled diesel generator set couple to suitable alternator of 220/415 V, AC, 1/3-Phase 0.8 p.f.(la mounted on a 1) M.S. fabricated bases frame) 2) M.S. fuel tank of required capacity. 3) first fill of lube oil. 4) AMF Control Panel 5) Suitable batteries with lead 6) Acoustic enclosure complete with all accessories conforming to IS comprising the technical as per manufacture (Range from 5 KVA to 625 KV, Kirloskar Green/bliss, Leyland, Volvo PENTA,PERKINSON, Mahindra Greaves Escort Engine & Kirloskar, Stamford, Leroy somer or equivalent alternator.50 3 3980x1240x1680 1870 Kg A/C, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
1
-
-
Load security charge for releasing Load to ASEB for 20 KW load, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
1
-
-
Installation of backup generator as directed / requirement, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
1
-
-
Internal Electric Works
-
-
-
Wiring for light/fan/call bell point with 2x1.5 sq.mm P.V.C. insulated single core unsheathed industrial (Multistoried) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/Anchor or equivalent make as approved by the EIC) in surface system, including 6 Amp flush type switch / bell push (Anchor penta/ gold medal/kolor kany.com/havells or equivalent make as approved by the EIC). GI / MS switch board (ISI) marked half conceal on wall with phenolic laminated sheet cover, ceiling rose (Anchor/Gold medal/Kolor kany. Kom/Havells or equivalent make (as approved by the EIC), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
3
-
-
Wiring for 5/6 pin 16 Amps plug point with 4 sq.mm P.V.C. insulated single core unsheathed industrial (Multi strand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the EIC) with flat 19 mm ISI marked casing and capping (AKG/ precision/presto plast/polycab/MW or equivalent make as approved EIC) in surface system including providing and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch (Anchor penta/ gold medal/kolor kany.com/havells or equivalent make as approved by the EIC), GI/MS switch board (ISI marked) with phenolic laminated sheet cover earth continuity with 2.5 sq.mm cable to the 3rd pin of the socket as required complete. (extra long point up to 15mm), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying with fitting & fixing of the following road lighting luminaries complete in the existing pole with high power LED and extendable up to with unique peanuts lens to ensure uniform distribution including making necessary connection as approved by the EIC with 2x2.50 sq.mm F.R. multi strand and P.V.C insulated single core cooper cable, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
48
-
-
Supplying with fitting & fixing of CFL/florescent luminaries completed will all accessories such as ballast, starter etc. directly on wall celling including connection with 1.5 sq.mm P.V.C insulated S.C. cooper conductor, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
Striplite luminaries complete with electronic ballast and decorative end cap with 1x36/40 watt fluorescent tube.(Crompton greaves make)Model-DSG1214EB ENERGYGOLD with power lux lamp or equivalent (Equivalent will be selected by the EIC considering the mother item rate) Philips/Wiproc /Bajaj/Havells/HPL/Solar/ jaquar make.
10
-
-
Wining for drawing sub-main line with P.V.C insulated single core unsheathed industrial (Multi strand) Cable FR confirming IS-694 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/ Nicco/Anchor or equivalent make as approved by the EIC) in surface flat ISI marked casing ‘n’ capping (AKG/ precision/presto plast/polycab/MW or equivalent make as approved by the EIC) system including earth continuity, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative. With 3x6sq.mm + earth continuity with 2x6 4 sq.mm. cable in flat 25 mm ISI marked casing ‘n’ capping system.
85
-
-
Supplying including fixing of following A.C ceiling Fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the EIC), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative (Without Regulator). Premium model 1400mm Sweep (ORIENT PSPO make) / Premium model 1400 mm Sweep SS-390 Deco. Hevells make)
18
-
-
Supplying including fixing of following A.C exhaust fan in the existing hole on the wall of following sweeps with making necessary connection, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
Trans air 300 mm sweep (Compton make)
7
-
-
Wiring for light/fan/call bell point with 3x1.5 sq.mm P.V.C. insulated single core unsheathed industrial (Multi strand) Cable FR confirming IS-694 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the EIC) in surface flat ISI marked casing ‘n’ capping (AKG/ precision/presto Plast/polycab/MW or equivalent make as approved by the EIC) in surface system including 6 Amp flush type switch/bell push (Anchor penta/ gold medal/kolor kany.com/havells or equivalent make as approved by the EIC), GI/MS switch board (I.S.I marked) with phenolic laminated sheet cover, ceiling rose etc., complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
14
-
-
Supplying, erection and commissioning of the following specification as per IS:2713: 410 SP hot dip galvanized steel tabular pole manufacturing out from electrically welded in 3 (three section having a base plate including providing all required building materials as directed and specified by the EIC (BANSAL/SRP/Valmont/PARUTHI ENGR make), complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative. 410 SP 43 length of pole =10.00 metre., length of sections, Bottom = 5.20 M, Middle=2.40 M, Top=2.40 M, out site dia & Thickness Bottom = 165.10x4.50mm, Middle=138.70x4.50mm,Top=114.3x3.65mm
6
-
-
Supplying and fixing 18 SWG sheet metal boxes of 200x250x60 mm deep filled with suitable size phenolic laminated sheet covered in front including painting etc. as required in surface wiring system, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying will filling and fixing single pole 10 KA 240/415 V 50 Hz MCB, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying and fixing 19 mm dia G.I 3 mtr. Length pipe for street light water tight bracket including bending to shape and wiring with 1.5 sq.mm WP/PVC wire etc, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Supplying and fixing of jaguar or equivalent Philips/Wipro LED wall light fitting and complete with shade, back plate including connection cable etc. as required –LED Bulk Head 8W, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
14
-
-
Wiring for 5 a pin 6 Amps plug point with 1.5 sq.mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the deptt.) with flat 19 mm ISI marked casing n capping (AKG/ precision/presto plast/polycab/MW or equivalent make as approved by the deptt. in surface system including 5 pin 6 Amps flush type socket outlets and 6 amps flush type switch (Anchor penta/ gold medal/kolor kany.com/havells or equivalent make as approved by the EIC), GI/MS switch board (I.S.I marked) with phenolic laminated sheet cover earth continuity with 2.5 sq.mm cable to 3rd pin of the socket etc as required complete. When placed elsewhere medium point up to 6.00 metre. Length, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
6
-
-
Wiring for drawing sub-main line with P.V.C insulated single core unsheathed industrial (Multistrand) Cable FR confirming IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex/RR Kabel/Nicco/Anchor or equivalent make as approved by the EIC) in surface flat ISI marked casing ‘N’ capping (AKG/ precision/presto plast/polycab/MW or equivalent make as approved by the EIC system including earth continuity. With 3x6sq.mm.+ earth continuity with 2x6 4 sq mm. cable in flat 19 mm ISI marked casing N’ capping system, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative.
1
-
-
Supplying with installation, testing and commissioning of Hi—wall 4 STAR rating non-deducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative. 2 Ton capacity (Carrier/Curve/Voltas make) Model Platinum 4S
2
-
-
Supplying including Fitting fixing of tube light complete with all accessories, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
25
-
-
Supplying including Fitting fixing of hanging light complete with all accessories, complete in all respects as per Specifications and provisions of CPWD Specifications for Electrical Works 2013, relevant IS code & direction of EIC and / or his representative
42
-
-
Solar Mast Light System: Supply, installation, testing and commissioning including transportation
-
-
-
Supply, transportation, installation, testing and commissioning at project site, 16 meter Solar High Mast with manual winch, 4 nos of 45W LED flood light and 4 nos of 100W Solar panel.
a) Construction of suitable shallow foundation with 1:2:4 concrete for the High Mast considering the safe soil bearing capacity at the site as 10T/sq.m at 2 Mtr depth with all materials and labour. b) Mast to be suitable for mounting of 4 nos of 45W LED flood light and 4 nos of 100W solar panel suitable to withstand against the maximum wind speed (IS 875-1987) of: 150 km/hr. Mast to be galvanized (as per BS EN ISO 1461) of length 75350 mm at top and 84650 mm at bottom and thickness of 3mm at top and 4mm at bottom, base plate of thickness 25mm, foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates (PCD: 460mm, length: 850mm and dia of 350mm at top and 150mm at bottom), GI Pipe earthing for High Mast with 3 meter long 50mm diameter pipe with 25x6 mm flats with all materials and labor erection. c) 45W Solar LED floodlight with in-built Li-Ion battery. LED color: Pure white with Lumen output of 120 per lumen. Operating temperature of -20 to 50 c with Power factor of 0.95. 14.8V, 40 Ah inbuilt Li-Ion battery with in-built MPPT charge controller. Automatic ON / OFF control system, automatic dimming control system and operational Bluetooth communication. d) Solar Panel of 12V, 100W solar panel. 4nos per high mast with dimension of approx. 1055mm x 655mm (LXW) Complete in all respect conforming to the site requirement and as per directions of EIC and / or his representative.
1
-
-
Fire Fighting Equipment
-
-
-
Supply, Installation, fixing of Dry Chemical Powder fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge confirming to IS:4947 with ISI mark, Powder will be confirming to IS:4308 with ISI mark (5 Kg) BRAND: Firestop / Friend / Fire Shield, complete in all respects as per directions of EIC and / or his representative
20
-
-
Supply, Installation, fixing of Dry Chemical Powder fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge confirming to IS:4947 with ISI mark, Powder confirming to IS:4308 with ISI mark (Extinguisher will be Trolley mounted). (50Kg), complete in all respects as per directions of EIC and / or his representative. Brand: Firestop / Friend / Fire Shield
1
-
-
Supply, Installation, fixing of Mechanical Foam (AFFF) fire Extinguisher confirming to IS:10204 with ISI mark and CO2 Cartridge confirming to IS:4947 with ISI mark, (AFFF) confirming to IS:4989 with ISI mark.(50 LITERS), complete in all respects as per directions of EIC and / or his representative. Brand: Firestop / Friend / Fire Shield
3
-
-
Creating facilities for custom & immigration at existing building at Karimganj terminal
-
-
-
Partition wall with door for creating facilities for custom & immigration at existing building at Karimganj terminal (24.4m X 7.4M): Providing, fitting and fixing anodised aluminium framed glazed doors with partition walls partly glass and partly prelaminated board with anodised aluminium frame made of 100mm x 43mm x 2mm sections of approved brand with doors style of size 81mm x 43mm x 2mm, top rails 46mm x 43mm x 2mm, lock rails 81mm x 43mm x 2mm, fitting with glazing clip, special rubber type gusket complete including hydraulic floor spring pivot aluminium door handle lock angles cleat etc. complete as per drawing given in Section VI: ToR and as directed by the EIC at all levels (i) 6mm thick glass panes and 12mm prelaminated board. in Partition work for making room and counter along with doors in main building (total length 26 m & 3.6m height), complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009, relevant IS code & direction of EIC and / or his representative
93.6
-
-
Provision of Exit Gate: Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels, complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009, relevant IS code & direction of EIC and / or his representative
0.58
-
-
Provision of Exit Gate: Providing and fixing in position collapsible M.S. shutters with vertical channels 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T-iron 40mmx40mmx6mm with 38mm dia steel pulleys complete with bolts and nuts, locking arrangements, stoppers, handles including applying a priming coat of red lead paint, complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009, relevant IS code & direction of EIC and / or his representative
2.52
-
-
Provision of Exit Gate: Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac), complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009, relevant IS code & direction of EIC and / or his representative
5.04
-
-
Provision of Exit Gate: Providing, fitting and fixing anodised aluminium framed double leaf glazed doors with anodised aluminium frame made of 100mm x 45mm x 2mm section of approved brands with door styles of size 81mm x 45mm x 2mm, top rails 50mm x 45mm x 2mm, lock rails 81 mm x 45mm x 2mm,bottom rails 100mm x 45mm x 2mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete with 6mm clear glass at all levels, complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009, relevant IS code & direction of EIC and / or his representative
2.52
-
-
Water Supply and Sanitary work: Construction of new toilet in washroom of size 1m x 1.4m with 1/2 brick wall up to ceiling size and all finish with approved vitrified tiles up to door level and in floor along with providing and fitting following approved sanitary and water supply fittings all complete with labour and material, complete in all respects as per Specifications and provisions of CPWD Specifications for Civil Works 2009, relevant IS code & direction of EIC and / or his representative (i) water closet (European type) with all fittings - 1 number
(ii) PVC flushing cistern with all fittings - 1 number
(iii) CP Bib cock - 2 numbers
(iv) Wash basin along with mirror towel rail & shop stand etc with all fittings – 1 number
1
-
-
Water Supply and Sanitary work: Supply and installation of two (2) number of bio-toilets on site (in terminal area) including transportation with all fittings and fixing including labour and materials all complete as per specification laid down in clause 12 (c) and directions of EIC
2
-
-
GST as applicable
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements