Indian Oil Adani Gas Private Limited Tender

Earthworkin excavationforfoundationsin ordinarysoils includingsoft rock / disintegratedrock in both dry and wet conditions includingpumping andbailing out surface andsubsoil water,shoring,strutting, slush removalincludingbackfilling in all positions in layers of 300mm at all heightsand depthsas perdrawings andspecifications whereverrequired,in Foundationpits andotherplaces with excavatedsuitablesurplus earthincluding reclaimingfrom spoil heaps kept within the plot includingdressing and levelling, watering and mechanical compaction etc.,transportingsurplus unserviceablesoil uptoany lead and spreadingin layersand as per specificationsand directionof Engineerin charge. TheMeasurementforpaymentshall be forthe theoreticalvolume only and it shall be the volumeof the block of the excavationhaving maximum bottom dimension of the levelling course/PCC as per drawing and to actual depth. Note: 1. The Contractor shall take into account in his rate, the provision for excess excavation required for necessary working space, cutting in slopes etc., which may require for excavation and other allied works and refilling the side slopes and working space in layers as per requirement.

For depth upto 2.0 m.

For depth beyond 2.0 m

EXCAVATION UPTO 1.5mt : HARD SOIL Excavation up to 1.5 mt. depth in all kind of Hard soil in any plan dimension including stacking of serviceable excavated earth, and disposal of surplus and unserviceable material away and outside the IOAGPL boundary limits, after backfilling using serviceable earth, irrespective of lead involved by means of mechanical transport or any other equivalent means, keeping IOAGPL indemnified of any liabilities from statutory/local bodies, all complete as specified & directed. Proper shuttering/support has to be made to support side soil wall and to avoid collapse of soil. Soil to be leveled and neatly dressed complete in all respect as per scope of work, detailed construction drawings, as per technical specifications and directions of the Engineer-in-charge.

P.C.C. : (1:4:8) Providing and laying Plain cement Concrete of nominal mix 1:4:8 by mass (1 cement:4 coarse sand: 8 crushed stone aggregates/gravels) with 40mm down size graded crushed stone aggregates for all depths below and up to plinth level in foundations, drains, fillings, non suspended floors, pavements and ramps or any other works etc. in any shape , position, thickness and finishing the top surface rough or smooth as specified and directed, including tamping, ramming, vibrating, curing etc. all as specified including the cost of materials, labour, tools, tackles, machinery, steel scaffolding/staging, sampling and testing all complete as per specification and direction of EIC/Consultant. Actual/Net measured quantities shall be paid. Cost shall excluding of formwork.

RCC : M25 (SUB & SUPER STRUCTURE) Providing and laying Reinforced Cement Concrete of nominal mix M-25 (1:1:2) Grade Excluding the cost of formwork and reinforcement , with 20 mm & down size graded crushed stone aggregates in SUB-STRUCTURE and SUPER STRUCTURE below plinth level of all types e.g. foundations, rafts, beams, slabs, pile caps, retaining walls, jambs, counter-forts, buttresses, trenches, manholes, pipe encasement, catch pits, drains, RCC pits, equipment foundations, pedestals, columns, pavements, suspended floors, brackets etc. and in SUPER STRUCTURE like beams, slabs, walls including Centring & Shuttering with counter forts, staircases, landings, steps, facias, gutters, shelves, window sills, canopies, lintels, ducts, brackets, chhajjas with drip molds etc. and any other structures in any other structures (including single pour concreting upto 50 Cu. m.) providing pockets, openings, recesses, chamfering, vibrating, tamping, curing and rendering, to give a smooth and even surface for all depths below and upto plinth level in any position, shape, level and thickness etc. including the cost of materials, labour, tools, tackles, machinery, steel scaffolding/staging, sampling and testing all complete as per specifications and directions of the Engineer-in-charge. Actual/Net measured quantities shall be paid.

TMT STEEL REINFORCEMENT : Supplying and placing in position High strength deformed TMT Steel Bars Reinforcement (Conforming to IS:1786, Grade Fe 415/500/500D) of TATA or equivalent make (as approved by EIC) for RCC work including transporting, straightening, cleaning, de-coiling, cutting & binding to required shapes and lengths as per details, binding with contractor's own 16SWG black soft annealed binding wire at every intersection, supplying and placing with proper cover blocks, supports, chairs, overlaps, welding, spacers, fan hooks etc. for all heights and depths etc. complete as per specification, directions and drawings. ALL MATERIALS SUPPLIED BY THE CONTRACTOR. (Supports, Chairs and laps are included in the cost and no separate measurement qty will be paid for the same) Reinforcement steel shall be of Tata, Sail, vizag or approved by consultant.)

SINGLE STOREY BUILDING WORKS (Superstructure)

Construction& handingoverof Single storeyRCC framedstructreUtility/Office building/Controlroombuildingcompletein all respectas perdrawings (tobe suppliedby Owner) and as per scope, technical specification and directions of Engineer-in-charge. Note :- 1.Rateto includecost of all labour,tools, tackles, equipment,hirecharges,supply of all materialssuch as minimum 43 grade OPC cement/PCC cement, brick crushing strength of not less than 50 kg/cm2 , RCC,R/F steel, inserts,chequaredplate , bolts, conduits, finishes,other minorconstruction materials,shuttering,stagingetc. shoring/struttingb, ailing andpumpingout water,masonrywork, DPC, plastering,painting,false ceiling, flooring/false flooring& electricaltrench, waterproof treatmenton roof,anti termitetreatementbelow foundationandfloors, plumbing,sanitation, Door& Window, Construction of staircase/Cat ladderall finishingwork etc. with all bye works and sundry works complete in all respects. 2. Foundation/ sub-structure to be paid separately vide respective item. 3.To be read with in conjunction with Particular Job Specification and tender drawings.

Fabrication : Structural Steel, Structural Fabrication Works - Supplying, Fabricating, Erecting & Fixing in position structural steel items viz. structure, Canopy structure, Monolith tower, trench covers, dispenser frames, cascade structure, pipe support, valve support, hand railing, ladder, staircase, clamps, brackets and all miscellaneous steel works as detailed and as directed by EIC at all levels using MS angles, beams, channels, tees, plates, pipes, rounds, squares, flats including hard wares like hinges, nuts, bolts, washers, etc. of various sizes and other structural steel sections conforming to IS 2062 including straightening, cutting, fabricating, welding, bending to shape, bolting, fixing in position, welding to other MS structure item or insert plate embedded in wall/concrete at site and finished the surface neat after grouting. Rate shall include for painting with two coats 50 micron DFT for Each Coat of synthetic enamel paint over a coat of 50 micron DFT for Zinc chromate primer, etc. complete, as directed by Engineer In charge. Material shall be of TATA/VIZAG/SAIL/ESSAR or other equivalent make only. Actual/Net quantities measured shall be paid. Weight of washers, nuts & bolts shall not be paid extra.Note :1. Welding rods of Adani or Ador make only to be used.2. ISI marked E-7018 to be used for welding on beam or truss part and 6013 for rest or as directed by Engineer-in-charge.3. Welding rod to be preheated to 60 degrees centigrade before usage.4. If fabrication work is done at site then contractor will have to bear the electricity consumption charges.

Providing and Fixing Fencing Structure

Supplying, fabricating & fixing of steel structural fencing fabricated from pipes conforming to IS:1161 and plates conforming to IS:2062 & fixing of GI weldmesh made from 3mm GI wire @ 75 mm bothways to structural steel frame by means of welding/bolting, including surface prepartion by mechanical claening including application of two coats of approved quality of synthetic enamel paint over a two coat of primer in approved shade including loading, transportation and unloading delivery at erection site, of all fabricated structures ,storage and handling at site, site assembly and finally erection of structures at appropriate location, alignment and welding of all structures true to line, level, plumb and dimension including making pokets & pouring with PCC (1:2:4) in of block 500x500x500 for fixing of posts etc complete as per drawing, technical specifications,scope of works and directions of the Engineer-In-Charge.

Fencing height 2.1m

Providing and Fixing Fencing Gates

Supply, fabrication & fixing of fencing gates fabricated from pipes conforming to IS:1161, plates conforming to IS:2062 & fixing of GI weldmesh made from 3mm GI wire @ 75 mm bothways to structural steel frame by means of welding/bolting, locking arrangement, etc., including surface prepartion by mechanical claening including application of two coats of approved quality of synthetic enamel paint over two coats of primer in approved shade including loading, transportation and unloading delivery at erection site of all fabricated structures, storage and handling at site, site assembly and finally erection of structures at appropriate location, alignment and welding of all structures true to line, level, plumb and dimension including making pokets & pouring with PCC (1:2:4) in block of size 500x500x500mm for fixing of posts etc. complete as per drawings, technical specifications, scope of works and directions of the Engineer-In-Charge.

4m Wide x 2.1m High

2m Wide x 2.1m High

SINGLE SS TUBE TRENCH

Providingandconstructionof Single SS tubetrenchin brick masonryoverthe 100mmthick PCC (1:3:6) basewith precastSFRC coversof600x550X 70 mm thk along with edgeangle(ISA 75x75x6)andfixing of ISA 50x50x6forsupportingpipe trays@ spacingof 1000mm c/c along thetrench, including12 mmin CM 1:4 plasteringof walls of trenches complete in all respect as per scope of work, detailed construction drawings, technical specifications and directions of the Engineer-in-charge. Note: 1. Rate to include cost of all labour, tools, tackles, equipment,hire charges,supply of all materialssuch as minimum 43 grade cement,bricks, Edge angle, anglefor supportingpipe trays,precast SFRC covers (600X550X70),aggregates/ sand , finishes, bitumen,other minorconstruction materials,shuttering , staging, earthworkin excavationandbackfilling using serviceable/ borrowearth in all conditions,shoring/strutting,bailing and pumpingout water,masonry work, plastering etc. with all bye works and sundry works. 2.To be read with in conjunction with Particular Job Specification and tender drawing

FULL BRICK MASONRY: SUB-STRUCTURE & SUPER STRUCTURE Providing and laying FULL BRICK MASONRY (230mm th. or more) with bricks of class-1, strength not less than 35 kg/sq.cm in cement mortar 1:6 (1 cement: 6 sand) in one or more brick thickness and in any shape in sub-structure & Super Structure at all depth/level including the cost of materials, labour, steel scaffolding/staging, sampling and testing, soaking of bricks, cutting & laying of bricks, providing recesses, making openings of any shape and size, embedding the fittings & fixtures, curing etc. all complete as per specifications. All materials including Cement to be supplied by the contractor. The rate shall includes cost of material, labour, tools tackles, machinery etc. all complete.)

EXTERNAL PLASTER : 20mm Th, Double coat, Sand Faced (Tippani)/Mala Finish (1:4) Providing and laying 20 mm thick two coat external sand faced tippani finish Cement Plaster on exterior walls of building & Compound wall in two layers including making groove and Tapak where ever required. (Consisting of 12 mm Th Base layer with rough finish in CM 1:4 with waterproofing chemicals and 8 mm Th top coat in CM 1:3 finish with sponge) including surface preparation, hacking the brick Masonary or RCC surface at all height/depth with all tools, material, labour, scaffolding and curing etc. to make even finish in true lines and levels all complete as per specifications and direction of engineer in Charge. Rate shall include providing & fixing chicken mash jali of best quality available & fixing it at brick and RCC junction all complete. Actual/Net quantities measured shall be paid..

Removing & Relaying of Existing Paver Block Removing and Relaying upto 80 mm thick ( grey or red ) rubber molded paver blocks of approved pattern in forecourt area or as per located in Existing Paver Block with laid over 50 mm thk river sand bed and joints to be filled with river sand and Compaction by Mechanical Compactor. Paver blocks should be in proper line and lvls. Paver block pattern.

FLOOR:GRANITE STONE (18MM THK) Providing and Laying 18 mm thick mirror polished, machine cut Granite approved color in floor, steps, wall and dado etc. laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand ) in true line and plain level with cement slurry to fix on wall / dado are cut according to the size and shapes given in drawing or to suit site dimension of the room and desired pattern with joints treated with white cement mixed with matching pigment , adhesive like araldite, including rubbing, curing, nosing of corners, cutting in profile, architectural works, etc. complete as per directions of Engineer In charge. [ Rate to include all labour, material, tools, tackles, hire charges, water charges, wastage, overheads etc. complete.] Actual/Net quantities measured shall be paid. For 100mm height skirting, payment to be made by considering skirting area multiplying 1.5 times to net area.

Painting (APEX / Weather coat / Weather shield)

Supplying andapplying3 coats of Apexpaintof Asian paints/ Weathercoatof Bergerpaints/ Weathershieldof ICI paintson externalwalls surfacesin approvedcolour at all heights as per scope of work and recommendationsof manufacturerincluding surfacepreparation,primerputty etc. detailed construction drawings , technical specifications and directions of the Engineer-In-Charge. [Rate to include priming coat of putty, scaffolding, tools & tackles consumables etc complete.]

Painting (OBD)

Supplying andfinishinginternalwalls andceilings in plasterof parispunning to achieve an even finish and applying3 coats of Oil BoundDistemper of Asian paints/ Berger/ICI brand in approvedcolourincludingsurface preparationp, rimer, puttyetc. as per scopeof work, detailed constructiondrawings , technical specificationsand directions of the Engineer-In-Charge. [Rate to include priming coat putty, POP punning, scaffolding, tools & tackles etc complete. ]

White washing

White washing with Dehradun/Rajasthan lime in 3 or more coats to give an even finish including the cost of adding required adhesive (DDL), blue pigment (Rob on walls, ceiling etc. complete in all respects as per scope of work, detailed construction drawings , technical specifications and directions of the Engineer-in-charge. [Rate to include whitening, scaffolding, tools & tackles etc complete. ]

EXTERNAL DEVELOPMENT

Preparingthe bedby scarifyinganddeweedingexisting surface,placinghumusearthmixedwith manure/cowdungin the ratio of 8:1 fora depthof 30 cm, roughdressing, fine dressing,levelling andfloodingwith water,plantingof selection1 species of grasswith 5 cm X 5 cm spacingas indicatedby site inchargeand thereaftermaintenance and watering for 45 days including all labours, tools, tackle, com

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to be batter. Rough finished surfaces of concrete (Flat)

SECTION -2- ELECTRICAL WORK

GI lightning rod 25 mm dia. 1800 mm long including supply of all hardware bare copper rope labour etc. complete as per approved drawings, specifications and directions of Engineer-In-Charge.

Design, engineering,supply including packing and forwarding, transportation, delivery at storage, of the 1.1kV grade XLPE insulated, PVC sheathed, FRLS power and control cables (conforming to IS:7098 and specification) of following sizes in trenches/ excavated under ground trench /trays, pulling through pipes and its proper sealing, cutting of paved area, roads etc.

4x 2.5 mm2 2XWY

Supply of electrical accessories including, cable tags, cable tie ,Flexible pvc conduit,cable marker, nickle plated lugs, double compressed brass cable glands,brass adaptar/reducers/nipples, fixing of metallic anchor fasteners for supporting of cable trays and misc. electrical switchgear including all labour and materials complete as required and as per directions of Engineer-In-Charge.

Main Distribution Frame - 20 pair

Supply & Installation of the complete earthing and lightning protection system, earth electrodes/ pit, earth main ring, earthing of electrical equipments, instrument panels, field instruments, process equipments and pipes/ flanges including all associated civil work with all material and labour as per specification and drawings approved by the company.

Supply & Installation of Earth Pits- GI PIPE Electrode with 6 mm thick chequered plate cover

Supply & Installation of Earth Pits- Copper Earth PIPE Electrode with 6 mm thick chequered plate cover

Supply & Installation of GI Strip (25X3) mm

Supply & Installation of GI Strip (50X6) mm

Supply, installation, testing, commissioning of Flameproof 80 W surface mounted LED lighting fixture for dispenser area canopy lighting with all fittings and accessories with all material and labour as per specifications, drawings and instruction of Engineer-in-charge. Work to be completed in all respects. Area lighting, integral flame proof well glass fixture (CMIFR approved for Zone-1/2 gas group IIA & IIB)

Supply installation & Fitting of 20m High Mast as per specifications and standred brinding drawing inclusive of hot dipped GI Pole, MS frame structure with aluminium composite panel 4mm thick clading and retro reflective vinyl sheed printed with IOAGPL logo in standred colours as per specification transportation, installation and fitting complete as per scope including preparetion of foundation of High mast as per the soil conditions, etc. complete (note; design, architecture and GA drawings shall be contractors scope and same will approve by PMC/CLIENT before excution)

Erection, testing & Commissioning of point wiring as per details in construction drawing & specification includes PVC conduits in ceiling, complete wiring including Wiring for main/ submain from DBs to switchboard and from switchboard to light/power points with 6/4/2.5/1.5 sq.mm. FR PVC insulated copper conductor multi starnd wire in PVC conduit in recess/ trench as required, switch boxes & switches (ANCHOR ROMA make or equivalent) for following items-

Light Point

Surface/ recess mounted LED light fixrure with LED lamp (type LCTL-36 -CDL of CG make or equivalent).

Surface/ recess mounted LED light fixrure with LED lamp (type LCTL-18 -CDL of CG make or equivalent).

Industrial Flame proof fluorescent lamp/LED fitting with lamp (type EXTL 240 of CG make or equivalent).

Exhaust fan (Industrial type 300/450 mm) with louvers,950 rpm,55watt with flap.

Flame Proof (CMIFR approved) 12" Exhaust Fan.0.25HP motor,1440 rpm. (Preferred Make: Baliga, FCG, CGL, Prompt).

Socket outlet (5/15 Amp combination) of ANCHOR ROMA make or equivalent.

20 Amp sheet steel enclosed industrial type socket with 20 Amp DP MCB for AC.

Ceiling fan with electronic regulator ( Energy efficent, 50W, 1200 mm sweep).

Telephone & LAN

Erection, Testing and Commissioning of following items at site as per specification :

Supply of telephone sockets (Piano red Type) in recess PVC conduit including PVC conduit,telephone socket,cable,accessories etc as required.

Supply of LAN sockets in recess PVC conduit including PVC conduit,telephone socket,cable,accessories etc as required.

Supply of 2 pairs,0.61mm, Telephone Cable/Wire, including accessories etc as required.

Supply of UTP cable (CAT 6), Make : D Link/Amp/Lucent

Supply of Main Distribution Frame - 12 pair

Supply of LAN switch with single incomer and min 10-port out going port complete in all respect.

SECTION - : ARCHITECTURE WORKS

PRECOATED GALVANIZED STEEL SHEET ROOFING Providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm + 0.05% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self- drilling/self-tapping screws complete: Ridges plain (500-600mm)

Canopy Roofing: Providing and fixing Canopy roofing 0.6 mm Trapezoidal profile high tensile belgalvanaium steel sheets (fy= 550 mps) having profile depth of 28- 32 mm and pitch of 186-250 mm with zinccalume coating 150 gsm and 35 microns super polyester colourbond XRW quality paint system (BHP make or equivalent), compatible flashing, fittings E. and fixtures and erecting them on roof/ sides using self drilling, self tapping fasteners at proper positions, water test, all work as per specifications by consultant. Make: SPACO/ INTERARCH

Canopy G.I Gutter: Providing and fixing 0.6 mm GI Sheet gutter (made from 16 SWG sheets as per required size or as specified ; in rectangular/Trapezoidal shape/as required with runner/purlins/base structure with adequate framing/GI nut bolts/bitumen washers etc. including providing foam fillers/bitumen adhesive taping/silicon injection so as to make the total surface water tight including making connection to down take pipe complete. fixed with G.I. 'J' or 'L' hooks and flat iron clamps complete. visible area shall be calculated for final measurement.

False Ceiling: The Luxalon or equivalent exterior 150F ceiling system shall consists of 150 mm wide aluminum panels which can simply be clipped into the prongs of a 150F carrier. The stove enameled aluminum panels shall recyclable, lightweight and strong. The panels shall supply in any length upto 6000mm. Panels shall join by using the panel splice. The carrier shall black, made of 0.95mm thick (for 150F) stove enameled aluminum and should provided with prongs to accommodate the panels. Carriers should have a standard length not less than 5000 mm and to be connected by using the carrier splice by sliding the ends of the carriers into each other (150F). The carriers shall be suspended at centers determined by the wind loading graphs using a rigid leveled suspension system. It shall Designed to withstand positive and negative wind loads. Utilize the washer set to isolate dissimilar metals. Carrier spacing (panel span) and carrier span (hanger wire and rigid support spacing) varies depending on design wind pressure (pounds per square foot). As a general guide. The wind load P.S.F. 35, panel span 29” rigid support spacing 20” & for P.S.F. 40, panel span 26", rigid support spacing 20". mention wind load, panel span and support spacing is based on using 3 or more rows of carrier, and is not valid if 150F panel is attached to less than3 carriers. Maximum panel overhang = 6". Maximum carrier overhang = 6". Hanger wire (min. 12 ga.) must be located at each compression strut. Compression strut (1 1/2"16 ga. CRS "c" channel shown) must not exceed spacing shown above for a given design wind pressure Maximum strut length for 1 1/2" 16 ga. CRS "c" channel is 28". Hanger wire and Compression strut must be attached to structure above to safely support all loads imposed officiate system. Attachment to structure above designed and provided by others. visible area shall be calculated for final measurement

CANOPY ACP: P & F of 4mm thickness,foil thichness 0.5mm Th, ACP of exterior type of approved make with warranty, PVDF coating, UV resistance, fire rated (EN13501- 1- B1 Grade, BS476 - Part 6 & Part 7), Corrosion resistance, including MS framework (box pipe size 25x50mm (or as approved by Civil EIC) with max spacing 600mm c/c) where ever required, scaffolding etc. complete for Canopy facia & columns. Scope shall include supply and fixing ACP with framework suggested or approved by EIC or architect and as per detailed drawing with cutting, bending and fixing in true line & shape with screw at every 9" distance and filling up joints or groves with approved / suggested black / Transparent / approved colour silicone as directed by architect / EIC. ACP colour shall match withIOAGPL branding colour. Other than listed approved ACP make, ifIOAGPL required colour is available in other make needs to be get approved fromIOAGPL EIC based on manufacturing technical data sheet and assurance for required warranty.IOAGPL shall reserve rights to approve the make matching with their branding colour..

Canopy Branding : Supply and Installing of canopy facia sinages, includes approved colour printing and pasting of cut/printed vinyl work at all four side of facia and LED backlit "ADANI GAS" & "CNG" or "LNG" embossed letters at three sides of Facia & at one side cut vinyle font as per the specification and size as per the branding documents approved by client. Etc all complete. Acrylic Letters : LED backlit Supply and Installation of 75-80mm embossed front glow LED backlit Acrylic letters "ADANI GAS" & "CNG" of required size and shape, easy to maintain and water tight as per the specification and size as per the branding documents approved by client etc. all complete. Sufficient number of LED lights to be provided so that uniform glow may appear from letters. LED light should be 0.7W, 5years warranty with 10years self life of Korean make /(Samsung Geo Q), GE or as approved by EIC to be used and Scope shall include fixing and installation of the letters on Canopy Facia / Monolith / Office building or any structure as suggested and directed byIOAGPL including necessary electrification work using approved make FRL/FRLS wire and connectors to connect with main power line all complete. Vendor to arrange and use necessary scaffolding, tools tackles, safety belt, PPE as perIOAGPL safety standards. Longer side of the individual font/logo part shall considered for payment measurement.

CANOPY GLOW SIGN LOGO Supply and Installing projected acrylic Backlit letters 2" embosed 2' in Ht. with neon white back light as per scope of work, detailed drawings and technical specifications including all necessary fittings. With Providing & Fixing Neon Transformer at LOGO & Monolith as per specification & instruction by site in charge

ENTRY/EXIT SIGNAGE Supply and Eraction of Lane signage of approved size with ACP box of Blue and Green color along with white retro reflective vnyl on ACP box complete with 150 mm D MS pipe support painted with MRF PU blue paint in match with blue ACP as per scope of work, detailed drawings and technical specifications with all necessary structure and fittings.

MONOLITH - As per approved deisgn. With Providing & Fixing Neon Transformer at LOGO & Monolith as per specification & instruction by site in charge

Mechanical & Piping Works

SECTION-A : ERECTION OF MECH. EQUIPMENT

Handling (including lifting and transportation from Client's store within GA to CNG stations) and erecting in position, the following equipment either on the foundation or on roof at ~ 3 to 4 m above ground level. Contractor's scope includes supply of all material and accessories including but not limited to any fixtures, clamps, gasket, nut bolts, etc.. Scope also includes supply of all lifting tools / necessary accessories and hiring of cranes for same.

Type-I; Cascade 3000 water ltr capacity. Erection at + 3 to 4.0 M level

Decompression unit-The item also includes supervision of OEM required for installation and commissioning of the equipment at station.

Dismantling of SS Tube and handover to Engineer-in-charge/Client at there respected Store.(Cost include with all labour, tool tackle, transport,loading unloading)