Indian Institute Of Toxicology Research Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Indian Institute Of Toxicology Research - IITR Tender
Coronavirus COVID 19
Eprocure
Opening Date8 Jul 2019
Closing Date5 Aug 2019
Tender Amount₹ 3,56,99,373
Costs
EMD
₹ 7,43,273Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_CSIR_28453_1Bid Award Id
ViewTender No
IITR/CW-16(08B)/17-18/WorksTender Authority
Indian Institute Of Toxicology Research ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
650
-
-
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats
111
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
420
-
-
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 mm
245
-
-
Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : Thickness above 40 mm up to 75 mm
42
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
10
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
8
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
1.5
-
-
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
232
-
-
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : Above 40 mm nominal bore
30
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
170
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
303
-
-
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
2110
-
-
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
212
-
-
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe
60
-
-
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe
42
-
-
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 150 mm dia pipe
74
-
-
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
13
-
-
Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.
306
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
19
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
35
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
511
-
-
Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.
402
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
4.5
-
-
Centering and shuttering including strutting, propping etc. and removal of form for: Shelves (Cast in situ)
16
-
-
Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers
50
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
400
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
712
-
-
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)
845
-
-
Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
35
-
-
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
13226
-
-
Providing and laying double charge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm.
1200
-
-
Providing and laying double charge Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete.
70
-
-
Providing & Fixing Armstrong or having similar specifications as Armstrong of Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles with Armstrong or having similar specifications as Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm, suitable for Green Building application, with Recycled content of 66% GW. The tile shall be laid on Armstrong or having similar specifications as Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm with minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per sqm.
94
-
-
Providing and Fixing Armstrong or having similar specifications as Armstrong Channelled Wood works perforated panels of width 192mm, thickness of 15mm and length 2400 mm or as required by the Architect/ approving engineer, made of a high density fibre board with minimum 725 Kg/M3 density substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a “Helmholtz” fluted perforation of 3mm width and 13mm of visible panel each. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece having NRC of 0.59. The panels shall be mounted on special aluminium splines using clips provided by Armstrong or having similar specifications as Armstrong and approved by the Architect/ Engineer-inCharge.
48
-
-
Providing & Fixing of Armstrong or having similar specifications as Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Ultima+ (Bevelled Tegular) Edge Tiles With Armstrong or having similar specifications as Armstrong 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.7, Light Reflectance ≥85%, Thermal Insulation (R-Value) = 0.4 m2K/W, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 19mm with Durabrite scrim on the face of the tile, suitable for Green Building application, with Recycled content. The tile shall be laid on Armstrong or having similar specifications as Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and minimum pull out stength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong or having similar specifications as Armstrong .
1040
-
-
Providing & Fixing of Armstrong or having similar specifications as Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Dune Supreme (Bevelled Tegular) Edge Tiles With Armstrong or having similar specifications as Armstrong 15mm Exposed RID.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.50, Light Reflectance ≥85%, Thermal Conductivity k = 0.06 w/m K, Colour White, Fire Performance Euroclass A2 - S1,d0 in module g of 90 grams per M2 and need to be installed with Suspension system of Armstrong or having similar specifications as Armstrong size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 44%. The tile shall be laid on Armstrong or having similar specifications as Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and minimum pull out strength of 100 Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong or having similar specifications as Armstrong.
665
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone of any colour and shade area of slab over 0.50 sqm.
250
-
-
Providing edge moulding to 18 mm thick Granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work
430
-
-
Extra for fixing granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
18.5
-
-
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in Granite stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
16
-
-
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
400
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
4860
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
960
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): with float glass panes of 5.0 mm thickness
450
-
-
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Pre-laminated particle board with decorative lamination on both sides.
266
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm
45
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm
12
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm
6
-
-
Providing and fixing anodised aluminium american door handle of size 200 mm with necessary screws all complete.
90
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
123
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
123
-
-
Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
73
-
-
Providing and fixing anodised aluminium door seal/sweep to protect the entry of rodent from bottom of aluminium/ wooden door shutters of size upto 1200mm with necessary screws.
43
-
-
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
8
-
-
Providing and laying antiskid digital print jointless ceremic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades as approved laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
82
-
-
Providing and fixing Ist quality digital print jointless ceramic glazed wall tiles of size 300x450mm or more conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
325
-
-
Providing and fixing soil, waste and vent pipes : Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989: 100 mm dia
182
-
-
Providing and fixing soil, waste and vent pipes: Centrifugally cast (spun) iron socketed pipe as per IS: 3989 : 75 mm diameter
121
-
-
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 100 mm dia pipe
210
-
-
Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 75 mm dia pipe
131
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe
60
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 75 mm dia pipe
60
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS - 3989: 100 mm dia
6
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. Sand cast iron S&S as per IS- 3989: 75 mm dia
6
-
-
Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS : 3989, 100 mm dia
20
-
-
Providing and fixing plain bend of required degree. Sand cast iron S&S as per IS - 3989, 75 mm dia
30
-
-
Providing and fixing single equal plain junction of required degree : 100x100x100 mm Sand cast iron S&S as per IS - 3989
27
-
-
Providing and fixing single equal plain junction of required degree : 75x75x75 mm, Sand cast iron S&S as per IS - 3989
34
-
-
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment) .
170
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests as approved by Engineer In-Charge.
1
-
-
Providing and fixing white vitreous Italian collection counter wash basin model No. OVAL under Cat No. S2030104 of size 560x470 mm of CERA or having similar specification of CERA including all fittings such as CERA or having similar specification of CERA 15 mm NB CP brass Sensor tap (with control box set) of Model No. F6010101, 32 mm CP brass waste & waste coupling model No. F8050102/F8050101 and bottle trape model No. F8060101 of standard pattern of CERA or having similar specification of CERA including cutting and making good the walls wherever required.
16
-
-
Providing and fixing white vitreous Italian collection pedestal type one piece Europian water closet S consealed with premium plastic seat cover and twin flush fittings of CERA or having similar specification of CERA model no. CRUSE Cat No. S1013135 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
16
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore
38
-
-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 20 mm dia nominal bore
102
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 25 mm dia nominal bore
108
-
-
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work: 50 mm dia nominal bore
108
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
9
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore
9
-
-
Providing and fixing best quality as approved 12 mm nominal bore connectors of required minimum 450 mm or more length CERA or having similar specification of CERA model No. F8070403 with CP brass nuts as per site requirement.
46
-
-
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 50 mm diameter pipe
108
-
-
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 25 mm diameter pipe
108
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 15 mm diameter pipe
38
-
-
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 20 mm diameter pipe
20
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore
8
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore
8
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15 mm nominal bore
8
-
-
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 50 mm nominal bore
8
-
-
Providing and fixing 15 mm nominal bore C.P. brass health faucet brass body with wall hook and 1 meter SS braided rubber hose pipe CERA or having similar specification of CERA for EWC seat with all complete.
16
-
-
Providing and fixing CP brass liquid soap dispenser of CERA or having similar specification of CERA of model No. F5007111.
16
-
-
Providing and fixing CP brass towel ring of CERA or having similar specification of CERA of model No. F5003105.
16
-
-
Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.
27
-
-
Providing and fixing white vitreous Italian collection half stall flat back urinal of size 360x330x740mm with flush and CP brass drain fittings of CERA or having similar specification of CERA of model no. CRUSE Cat No. S1013135 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
16
-
-
Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works
70
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
70
-
-
Providing and fixing 6 mm thick looking mirror of superior quality bevelled edge glass of approved make and of rectangle shape fixed with best quality stainless steel studs & screws in sufficient quantity (minimum 8 Nos) and suitable backing all complete. 600x1200mm
8
-
-
Providing and fixing 6 mm thick looking mirror of superior quality bevelled edge glass of approved make and of rectangle shape fixed with best quality stainless steel studs & screws in sufficient quantity (minimum 8 Nos) and suitable backing all complete. 750x1200mm
4
-
-
Providing and fixing 6 mm thick looking mirror of superior quality bevelled edge glass of approved make and of rectangle shape fixed with best quality stainless steel studs & screws in sufficient quantity (minimum 8 Nos) and suitable backing all complete. 1200x1200mm
4
-
-
Providing and fixing CP brass toilet paper holder with flap guard of CERA or having similar specification of CERA of model No. F5003110 with necessary screws all complete.
16
-
-
Providing and fixing 15 mm nominal bore C.P. brass bib cock of CERA or having similar specification of CERA of model No. F2002151.
2
-
-
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of CERA or having similar specification of CERA of model No. F1008201.
46
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989
16
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS - 3989
30
-
-
Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 75 mm dia
26.5
-
-
Providing and fixing C.P. brass floor circular type grating for 100mm dia floor traps of approved make and best quality.
46
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
1229
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
73
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
1969
-
-
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
81
-
-
Providing and fixing 15mm nominal dia C.P.brass extention nipple of required length up to 100 mm with flenge of CERA or having similar specification of CERA for proper installation of C.P.brass bath room fittings.
23
-
-
Providing and fixing a set of white viterous chinaware installatios of CERA or having similar specification of CERA comprising of EWC seat 710x370x810mm model No. S1021113/S1021114 - 01 Peice, cistern model No. S1060106-01 peice, twin flush fittings - 01 set, PVC seat cover model No. B1520118 - 01 peice, washbasin 510x400mm model No. S2040101 - 01 peice, Spatula lever basin mixer - 01 Peice, wall mounted Grab bar 600 mm long model No. B2210106 - 02 peices, wall mounted hingedrail 750 x750mm model No. B2210108 - 01 peice complete for physically disabled persons.
1
-
-
Providing and fixing automatic hand dryer 290x163x216 (ABS body) of CERA or having similar specification of CERA of model no. 6910A Cat No. B 2220102 with all fittings and fixtures complete including cutting and making good the walls wherever required.
8
-
-
Providing and fixing a set of M.S. bearings of best quality for 'G' chanel for making the door (upto 1200 mm wide door shutter) sliding including the cost of ncessary screws, cleats, stoppers etc. all complete for making the door sliding.
4
-
-
Providing and fixing louvered glass strips of 5 mm thick glass in aluminium louver opertation system including cost of glass strips, louver opertation system, labour, T&P, Screws, etc all complete.
2.4
-
-
Providing and fixing a set of two numbers GI full threaded 8mm dia tie rods in anodised aluminium door shutters with necessary nut bolts, screws etc all complete.
47
-
-
Providing and fixing of 08 mm thick toughened frosted glass urinal partition of standard curved shape size 450Wx900H mm having half round both front corners of JAGUAR or having similar specification of JAGUAR Cat No. JSE-CHR-810UC450X including suitable stainless steel swing hinges and screws all complete as directed.
14
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge: 50mm average thickness
21
-
-
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge: 25mm average thickness
400
-
-
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter
1485
-
-
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars above 12 mm diameter
192
-
-
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
400
-
-
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/ mm2). 25 mm average thickness in 2 layers.
380
-
-
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/ mm2). 50 mm average thickness in 3 layers.
21
-
-
Providing and fixing 12 mm thick toughened glass frameless partition with two double leaf doors as per drawing attached for size including cost of all necessary best quality with OZONE or having similar specification of OZONE or equivalent make Stainless Steel patch fittings such as hydraulic patch for bottom - 04 Nos, top patches - 04 Nos, over panel patches for glass - 03 Nos, over panel patche for wall - 01 No, S S handles 600 mm - 04 Nos, patch locks - 04 Nos, S S profile for fixed glass , 12 mm thick toughened glass for 2.46 x 2.63 mter -02Nos. Etching work of toughned glass for border and monograms , installation charges, making holes , making cutouts , cartage up to site, glass handling charges, silicon sealant, wastage, scaffolding etc. all complete.
1
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
23
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size).
7.15
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
5
-
-
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
-
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
15.6
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, All kinds of soil.
215.37
-
-
Providing and fixing 15 mm nominal bore C.P. brass two way bib cock of CERA or equivelant make of model No. F2002161.
13
-
-
Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 3989
6
-
-
Providing and fixing terminal guard : 75 mm Sand cast iron S&S as per IS - 3989
6
-
-
Providing and fixing collar : 100 mm Sand cast iron S&S as per IS - 3989
6
-
-
Providing and fixing collar : 75 mm Sand cast iron S&S as per IS - 3989
6
-
-
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 15 km for all lifts, complete as per directions of Engineer-in-Charge.
650
-
-
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia
250
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia
170
-
-
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 100 mm nominal size dia
70
-
-
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
40
-
-
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.
250
-
-
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 100 mm dia
5
-
-
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 100 mm clamp
5
-
-
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 100 mm dia
5
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
150
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
201.37
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).
13.08
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases for columns
128.67
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
17.21
-
-
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
194.13
-
-
Neat cement punning.
118.18
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
56.72
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
15.78
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
34.45
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
874.14
-
-
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.
41.55
-
-
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
37.4
-
-
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :With 20 mm diameter round bar
30
-
-
Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg
13
-
-
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
10
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter
4
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
Extra for depth beyond 45 cm of brick masonry chamber : For 500x700 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
Extra for depth beyond 45 cm of brick masonry chamber : For 600x850 mm size With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
Providing and laying 160 mm dia unplasticised -PVC pipe confirming to IS 4985 / 2000 suitable for 6kg/cm sq. working pressure rain water pipes for connecting to indivisual recharge wells of different buildings and fixing with suitable class adhessive of approved quality.
150
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
133.13
-
-
Bituminus road or Cement concrete road or cement concrete floor or Brick on edge floor cutting upto 150 mm for laying pipe lines & making good the same.
105.86
-
-
Supply and fixing of Butterfly valve as per IS with specials nipples, nut bolts, packings and clamps etc of size 160 mm nominaal bore.
8
-
-
Providing and fixing nylone mesh around the slotted casing pipe of bore well as directed by engineer in-charge to prevent the entry of silt, sludge, sand and unwanted forign materials.
70
-
-
Providing and fixing of end cap of 113 mm dia and 150mm long to bore well pipe at top made of GI sheet having 25 mm dia and 300 mm long of desired shape vent pipe made of same material covered with mosquitoproof GI wire netting.
5
-
-
Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size ...
-
-
-
.... for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (cost of sealant inclusive in this item), all complete as per approved drawing & directions of Engineer-in-Charge. (Cost of approved quality glass panes shall be paid separately). Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.
134
-
-
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded ....
-
-
-
..... at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality (cost of sealant inclusive in this item), all complete as per approved drawing & direction of Engineer-in-Charge. (Cost of approved quality glass panes shall be paid separately). Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and ingle glazing bead of appropriate dimension.
80
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for ....
-
-
-
..... fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality (cost of sealant inclusive in this item), all complete as per approved drawing & direction of Engineer-in-Charge. (Cost of approved quality glass panes shall be paid separately but cost of fibre /nylon wire mesh and silicon sealant shall inclusive in this item). Three track three panels sliding window with fly proof fibre/nylon wire mesh (Two nos. glazed & one number fibre/nylon wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.
100
-
-
Providing and fixing factory made 30 mm thick door shutter Non decorative finish made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.
70
-
-
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 75 mm width & 42 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
206
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : 100x60x2.50 mm in solid PVC doors.
123
-
-
P/F 65 mm size mortice lock in door with a pair of Stainless Steel 304 grade handles of size 175 mm including cost of necessary SS screws and labour charges all complete.
41
-
-
P/F Stainless Steel 302 grade tower bolts of size 200 x 10 mm in door with necessary SS screws including cost of labour charges all complete.
43
-
-
P/F Stainless Steel 302 grade latches sliding lock barrel bolt for toilet doors with necessary SS screws including cost of labour charges all complete.
32
-
-
Providing and fixing 6 mm thick clear toughened glass in uPVC doors, windows and ventilators including all labour charges etc complete.
292
-
-
Extra for providing frosted toughened glass panes 6 mm thick instead of clear toughened glass panes 6 mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
44
-
-
Less buy back of various scrap items like Old & used outlived ms Z section window, doors and ventilator frames with shutter up to 3 sqm which are old and used outleaved material received from dismantling work in this building.
1504
-
-
Less buy back of various scrap items like Old & used outlived flush door frame and door shutter up to 3 sqm, area beyond 3 sqm and wooden partition frame work also which are old and used outleaved material received from dismantling work in this building.
2945
-
-
Less buy back of various scrap items like Old & used outlived aluminium doors and partitions which are old and used outleaved material received from dismantling work in this building which are old and used outleaved material received from dismantling work in this building.
852
-
-
Less buy back of various scrap items like old and used mild steel railing and wall brackets which are old and used outleaved material received from dismantling work in this building.
531
-
-
Less buy back of various scrap items like Old and used outlived reinforcement steel received from dismantling of RCC which are old and used outleaved material received from dismantling work in this building.
105
-
-
Less buy back of various scrap items like Old and used outlived GI pipes 15 to 50 mm dia which are old and used outleaved material received from dismantling work in this building.
390
-
-
Less buy back of various scrap items like Old and used outlived sand Cast Iron pipes 75 to 150 mm dia which are old and used outleaved material received from dismantling work in this building which are old and used outleaved material received from dismantling work in this building. .
1657
-
-
Less buy back of various scrap items like Old and used outlived PVC flushing cistern which are old and used outleaved material received from dismantling work in this building.
39
-
-
SUB HEAD: (B) ELECTRICAL WORK
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
757
-
-
Wiring for twin control light point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit,2 way modular switch,modular plate,suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc as required.
4
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (i) 2x2.5 sqmm + 1x2.5 sq mm earth wire.
1200
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (i) 2 pair
1200
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (i) 20 mm
500
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (ii)25mm
400
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (iii)32mm
250
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. (i) 3x1.5 sq mm
300
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. (ii) 3x2.5 sq mm
300
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. (iii) 3x4 sq mm
8000
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
571
-
-
Supplying and fixing 6 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (i) single pole
1044
-
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.
32
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (i) Upto 450 mm sweep
49
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (ii)Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
49
-
-
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as requid. (i) 125 Amp,16 KA,Tp,MCCB
29
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required). (i) 4 way (4+12), Double Door
17
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required). (ii) 8 way (4 + 24), Double door
16
-
-
Laying of one number pvc insulated /XLPE armoured power cable and copper conductor 100 pair armoured telephone cable of following size direct in ground including excavation,sand cushioning,protective covering and refilling the trench etc as required. (i) Above 35 sq mm and upto 95 sq mm
400
-
-
Laying and fixing of one No. pvc insulated and pvc sheathed/XLPE power cable of 1.1 KV grade/telephone cable of following size on wall surface as required. (i) Upto 35 sq mm
330
-
-
Laying and fixing of one No. pvc insulated and pvc sheathed/XLPE power cable of 1.1 KV grade/telephone cable of following size on wall surface as required. (ii) Above 35 sqmm and upto 95 sq mm.
300
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE conductor cable of 1.1 KV grade as required. (i) 3x1/2x25 sq mm
34
-
-
Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE conductor cable of 1.1 KV grade as required. (ii) 3x1/2x50 sqmm
40
-
-
Supply of recess mounting 36w,white,596mmx596mm size panel LED light fitting having inbuilt occupancy/motion sensor PIR type complete with electronic driver and all other accessories complete in all respect as required.
480
-
-
Supply and installation of wall mounting fan of 400mm sweep.
120
-
-
Supplying & fixing of 1 module PVC mounting box with modular plate and cover plate in front in existing upvc trunking/cable management system including providing and fixing of RJ-11 modular telephone jack, connection etc complete as required.
44
-
-
Supplying & fixing of 4 modules PVC mounting box with modular plate and cover plate in front in existing upvc trunking/cable management system including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch, connections etc as required. Make:PVC box,switch, socket: MK (Honeywell).
480
-
-
Supplying & drawing of PVC insulated 4 pair cat 6,UTP Internet cable into existing surface/recessed steel/PVC Conduit/trunking as required.
5000
-
-
Supplying & fixing of 2 module PVC mounting box with modular plate and cover plate in front in existing upvc trunking/cable management system including providing and fixing RJ45 modular cat6,RJ45 computer jack with cover plate ,connection etc as required.
250
-
-
Providing and fixing of upvc trunking/cable management premier system of size 100mm/50mm on wall surface complete work as required.
1500
-
-
Supply and fixing pvc flat tee of size 100mmx50 mm in the existing UPPVC trunking/cable management sytem.
100
-
-
Supply and fixing pvc divider 50 mm deep in upvc trunking/cable management sytem to divide the existing trunking horizontally.
1000
-
-
Supply and fixing of pvc end cap of size 100mmx50 mm in Upvc trunking/cable management system.
120
-
-
Supply and fixing of internal pvc angle size 100mmx50mm In existing upvc trunking/cable management system.
120
-
-
Supply and fixing of external pvc angle size 100mmx50mm in existing upvc trunking/cable management system.
120
-
-
Supply and fixing of pvc joint cover size 100mmx50 mm in upvc trunking/cable management system.
750
-
-
Supply of heavy duty exhaust fan with louvre shutter of 300 mm sweep having 900 rpm, 240V, AC.
49
-
-
Supply of square surface mounting 12 watt,white LED light fitting with electronic driver and all other accessories complete in all respect as required. Make: Havells Model: LHEAAWP7IL1W012 or equvalent of Philips/Bajaj/C &S/Crompton/Wipro.
65
-
-
Supply of surface mounting 9watt LED mirror light with electronic driver and all other accessories as required.
9
-
-
Supply of 3x1/2x25 sq m pvc insulated, pvc sheathed/XLPE aluminium conductor 1.1 KV grade armoured power cable.
250
-
-
Supply of 3x1/2x50 sq m pvc insulated, pvc sheathed/XLPE aluminium conductor 1.1 KV grade armoured power cable .
300
-
-
Supply and fixing of 100 pair telephone MDF box with krone module.
1
-
-
Supply and fixing of 30 pair telephone MDF box with krone module.
4
-
-
Supply of 100 pair 0.5 mm size anealed bare copper conductor polythene insulated,armoured industrial telephone cable conforming to ITD specifiction.
400
-
-
Supply of 20 pair 0.5 mm size anealed bare copper conductor polythene insulated,armoured industrial telephone cable conforming to ITD specifications.
80
-
-
Supply of square shaped recess mounting 15watt, 180mmx180 mm size, down lights with electronic driver complet with all accessories as required. The down lights shall be suitable for operation with PIR type occupancy/motion sensor.Make: Havells,Model: EDGEPROSQDLR15WLED857S or eqv. of Philips/Bajaj/C&S/Crompton/Wipro.
25
-
-
Supply,installation,testing & commissioing of ceiling mounted PIR Occupancy/Motion Sensor complete with all accessories such as sensor and actuator etc as required including control wiring of sensor with LED lights,testing and commissioning etc complete work as required.Make: ABB/ Havells /Philips/ Wipro/Hager/MK.
9
-
-
Earthing with GI earth plate 600mmx600mmx6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe of 2.7 meter long etc with charcoal/coke and salt etc as required.
2
-
-
Providing and fixing 25mmx5mmGI strip in 40 mm dia GI pipe from earth electrode including connection with GI nut,bolt,spring washer,excavation and refilling etc as required.
80
-
-
Providing and fixing of 25mmx5mm GI earth strip on surface or on recess for connections etc as required.
60
-
-
Less buy back cost of the salvage value of dismantled electrical fixtures received after dismantling and removing of old existing light fittings and fixtures, switch boards,switches, MS conduits, DB boxes,fans, exhaust fans, electric wires from the building excluding Main LT Panel and main distributin panels including taking them out from the site complete with required labour, tools and plants.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements