Indian Institute Of Technology Tender

... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

Indian Institute Of Technology - IIT Tender

Works
Energy, Oil and Gas
Eprocure
Opening Date27 May 2025
Closing Date16 Jun 2025
Tender Amount₹ 6,13,64,881 
Notes
Download

AI Insights

Class Of Bidder
... View More
The eligible class required by a bidder to participate or bid in the tender is 'Class of Contractor' or 'A Class Electrical License'.
Technical Capacity
... View More
The bidder must have completed satisfactorily one of the following: * One similar work of 80% (490 Lacs) value of the estimated cost put to tender * Two similar work of 60% (368 Lacs) value of the estimated cost put to tender * Three similar work of 40% (245 Lacs) value of the estimated cost put to tender Additionally, the bidder must have completed one work costing not less than Rs. 245 Lacs value with a central government department/state government/ CPWD/ PWD/ State PSU/ Central PSU/Central autonomous/CFTI. The definition of similar work is "Construction of 11/0.433 kV & above substation works consisting of Transformers, HT panel and LT panel/DG sync panel/PLC panel/APFC etc. with installed transformer capacity of minimum 2 X 2000 KVA." The value of executed works shall be brought to the current costing level by enhancing the actual value of work at a simple rate of 7% per annum, calculated from the date of completion to the previous day of the last date of submission of bids. The bidder should have an average annual financial turnover of at least 100% of the estimated cost of work put to tender during the last 3 consecutive financial years. Works completed during the last 7 years ending on date 16.06.2025.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Type : Outdoor Distrubution Transformer

-

-

-

... More
IS Standard: IS 1180 & IS 2026 (Level-2)

-

-

-

... More
Cooling Type : ONAN (oil natural and air natural)

-

-

-

... More
No. of Winding : Two

-

-

-

... More
No. of phases : Three

-

-

-

... More
Voltage Ratio : 11/0.433 kV

-

-

-

... More
Vector Group Reference : Dyn 11

-

-

-

... More
Insulation Class : F

-

-

-

... More
OTI, WTI & low oil level with marshaling box with alarm and trip contacts.

-

-

-

... More
Manual tap changer + 7.5% to - 7.5% in steps of 2.5% OCTC.

-

-

-

... More
Buchholz relay with alarm and trip contacts and valve on conservator side connection. HV side cable box 2R x 3 C x 240 sq.mm. box and LV side box arrangement for 4000 A bus duct connection as reqd. complete.

2

100

-

... More
Supply installation , testing & commissioning of 4000 A FP aluminium busduct with 100 % neutral, 70KA, IP 55 with 2 mm MS enclosure, including 4000 A copper flexibles connection at both ends of transfromer and LT panels. busduct both side having 2 runs of 50x10 mm GI strip for earthing connection, space heater, silica gel breather and shall be panted with black mat finish paint with MTG arrangment, spcifications confirming to IS 8623, IEC 60529 as reqd. complete.

30

10

-

... More
Supply, installation, testing and commissioning of indoor type, metal clad switchgear with fabricated from 2 mm thick CRCA/ Aluzinc material, Maximum system voltage 12 kV and rated 11 kV, 1250 amp, 25kA/1Sec VCB panel with 8 no's VCBs with integrated operating handle, totally enclosed and fully interlocked with self support copper busbar, horizontal draw out breaker with all compartments type tested for internal arc for 25 kA for 1 sec as per IS 13118, IS 12729 IEC 62271-100, as amended up to date, breakers should be interchangeable between incomers & feeders, having earthing switch / truck, following specifications complete as reqd.

-

-

-

... More
Incoming (2 set, incomer-1 from 33kV ss & incomer -2 from SS 4)- 3P 1250 A VCB electrically operated, draw out type with completely encapsulated poles and continuous rated closing & tripping coils.

-

-

-

... More
Three nos 800-400/5-5 ratio, 2.5VA, class 1.0 Resin Cast Current Transformer for metering purposes and class 5P10 Resin Cast Current Transformer for protection purposes.

-

-

-

... More
Three nos. Potential Transformer 11kV/110V epoxy cast resin,class I for metering and class 3P for protection withdrawable type with HT fuse

-

-

-

... More
Numerical relay with LCD Display - 3 over current + Earth Fault with instantaneous element with IDMT/ DMT characteristics selectable at site , master trip relay hand reset type trip circuit supervision function, inrush protection, record and store at least 100 Events with Date and Time Stamp, Last Five Fault Records stored in Non-volatile memory , Self Supervision function, Minimum 4 Digital Binary Inputs and 6 Digital output Contacts, Modbus communication Protocol with RS-485 Port, Breaker Control (ON/OFF) ,Modbus protocol for communication., Antipumping relay.

-

-

-

... More
Multifunction Meter with RS485 communication port scada compateble.

-

-

-

... More
One Set of Red / Green / Indication Lamps for close and open position. One Amber indicating lamp for trip circuit healthy. One Set of white phase indication lamps for phase.

-

-

-

... More
Outgoing (7 set, O/G-1 for TR-1,O/G 2 for TR-2,O/G3 for TR-1 ss9,O/G4 for TR-2 ss9,O/G5 TR-1 SS11, O/G6&7 spare) - Eight nos, 3 pole 1250A VCB electrically operated, draw out type with completely encapsulated poles, and continuous rated closing & tripping coils.

-

-

-

... More
Three Nos. 300-150/5-5 ratio, 2.5 VA, Class 1.0 Resin Cast Current Transformers for metering purposes and Class 5P10 Resin Cast Current Transformers for Protection Purposes.

-

-

-

... More
Instrument & Protection Panel - Numerical relay with LCD display- 3 OC+ 1 E/F with instetenious element IDMT/DMT characteristics selectable at site , master trip relay hand reset type trip circuit supervision function, inrush protection, record and store at least 100 Events with Date and Time Stamp, Last Five Fault Records stored in non-volatile memory, Self Supervision function, Minimum 4 Digital Binary Inputs and 6 Digital output Contacts, Modbus Communication Protocol with RS-485 Port, scada compateble remote Breaker Control (ON/OFF) feature over Modbus.

-

-

-

... More
Auxiliary relay for fault (OTI, WTI, Buchholz-Alarm and Trip

-

-

-

... More
Each feeder having Multifunction Meter with RS485 communication port, scada compateble. Elite 446 or equivalent multi -line phase digital panel meter for accurate and reliable measurement of electric parameters(V,I,W,F..etc.) for industrial and commercialapplications. Ithas a large multi line backlit display which enables four parameters to be displayed simultaneously.Modbus communication capability allows easy integration with energy monitorir system.Expansion modules can be fitted for enhane system integration(Pulse input/output or eathernet) Connection tyep:HV3/HV4/LV4 aplications, measurement Voltage:57.7/100V to 240/415V AC, Standards: IS13779,IS14697,IEC62052-11,IEC62053-21,IEC62053-23,IEC62053-22,IEC61010,IEC62053-31,Dimensions:96mmx96mmx65mm, Ingress Protection:IP-54, Load Survey: 6 parameters for 40days,at 30 minutes integration, Addiional Plug in modules: 2 pulse inputs,2pulse outputs module,4 analogue output module,Ethernet gateway module.

-

-

-

... More
One Set of Red / Green / Indication Lamps for close and open position. One Amber indicating lamp for trip circuit healthy. One Set of white phase indication lamps for phase.

1

10

-

... More
Supply installation testing and commissioning of cubical type LT panel PTTA type, approved make OEM only, suitable for 415V, 3 phase, 4 wire 50 Hz AC supply system fabricated in compartmentalized (preferable) design from CRCA sheet steel of 2mm thick for frame work and covers. 3mm thick for gland plated i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable capacity extensible type FP Aluminium alloy 4000A Bus bars of high conductivity. DMC.SMC bus bar supports, with short circuit withstand capacity of 70 KA for 1 sec.

-

-

-

... More
bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of suitable size at the rear with 2 Nos earth solid connections from main bus bar to switch gears with required 1.5 sqmm zero halogen fire retardant low smoke insulated copper conductor s/c cable, cable alleys, cable gland plate in two half. As per OEM standard, busbar shall be designed with rise over temperature of 55 deg C above ambient temperature of 40 deg C.

-

-

-

... More
The panel shall be equipped with relays, timers set of CT's for metering & protection and energy analyser to indicate current phase, line voltage, frequency, power factor, KWH, KVARH. Provision of over load, short circuit, restricted earth fault, under frequency control cabling and interlocking, suitable cable termination chambers/ bus bars extension and providing indicating lamps of phases for all feeders complete with foundation as per drawing and specifications conforming to IS 8623 and IEC 61439 amended up to date complete as reqd.

-

-

-

... More
Incoming from 2500 kVA Transformer( TR-1)

-

-

-

... More
Incomer 1 No's 4000A, FP, EDO,70 kA, ACB with micro processor based release for O/C,S/C& E/F protection with LCD display 2NO+2NC Aux. Contact. Trip contact T&C. etc. and 1 No. Buscoupler (Between TR-1 & TR-2/DG) 4000A, FP, EDO,70 kA, ACB with micro processor based release for O/C,S/C& E/F protection with LCD display 2NO+2NC Aux. Contact. Trip contact T&C. etc. and revised SLD is enclosed.

-

-

-

... More
With ON,OFF,Trip ,RYB, indication. Digital multifunction KWH meter. Digital Amp and volt meter with selector switches etc.

-

-

-

... More
Out Going: supplying and fixing of following ACB and MCCB as outgoings in panel.

-

-

-

... More
2 nos.2500 A, FP, EDO, 50 kA ACB with microprocessor based O/C,S/C,& E/F protection. Safety Shutter. 2NO+2NC Aux. Contact etc. 2 Nos with T-N-C.

-

-

-

... More
2 nos.1600 A, FP, EDO, 50 kA ACB with microprocessor based O/C,S/C,& E/F protection. Safety Shutter. 2NO+2NC Aux. Contact etc. 2 Nos with T-N-C.

-

-

-

... More
2 nos. 800 A, TPN, EDO, 50 kA ACB with microprocessor based O/C,S/C,& E/F protection. Safety Shutter. 2NO+2NC Aux. Contact etc. 2 Nos with T-N-C.

-

-

-

... More
2 nos. 630 A, TPN, 50 kA,MCCB with Microprocessor based O/C,S/C,&E/F, LSI Protection with rotary handle.

-

-

-

... More
4 nos. 400 A, TPN, 50 kA,MCCB with Microprocessor based O/C,S/C,&E/, LSI Protection with rotary handle.

-

-

-

... More
2 nos. 250 A, TPN, 50 kA,MCCB with Microprocessor based O/C,S/C,&E/F, LSI Protection with rotary handle.

-

-

-

... More
2 nos. 100 A, TPN, 50 kA,MCCB with Microprocessor based O/C,S/C,&E/F, LSI Protection with rotary handle.

-

-

-

... More
all out goings with ON.OFF, indication. Digital multifunction meter . Digital Amp meter with selector switches etc. Complete as required & as per SLN enclosed in tender.

-

-

-

... More
Each feeder having Multifunction Meter with RS485 communication port, Elite 446 or equivalent is multi -line phase didgital panel meter for accurate and reliable measurement of electric parameters(V,I,W,F..etc.) for industrial and commercialapplications. Ithas a large multi line backlit display which enables four parameters to be displayed simultaneously.Modbus communication capability allows easy integration with energy monitorir system.Expansion modules can be fitted for enhane system integration(Pulse input/output or eathernet) Connection tyep:HV3/HV4/LV4 aplications, measurement Voltage:57.7/100V to 240/415V AC, Standards: IS13779,IS14697,IEC62052-11,IEC62053-21,IEC62053-23,IEC62053-22,IEC61010,IEC62053-31,Dimensions:96mmx96mmx65mm, Ingress Protection:IP-54, Load Survey: 6 parameters for 40days,at 30 minutes integration, Addiional Plug in modules: 2 pulse inputs,2pulse outputs module,4 analogue output module,Ethernet gateway module.

-

-

-

... More
Bus Bar

-

-

-

... More
4000A 415V, 3 phase 4 wire busbar (100% neutral) 50Hz Aluminium bus bar

-

-

-

... More
Note : All ACBs and MCCB's aux. contacts for ON/OFF and trip spare contacts to be wired up to terminal block.

1

10

-

... More
Supply, Installation, testing and commisssioning of cubical type LT panel incoming from DG synchronizing panel & TR-2 suitable for 415V, 3 phase, 4 wire 50 Hz AC supply system fabricated in compartmentalized (preferbly) design from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plated i/c cleaning & finshing complete with 7 tank process for powder coating in approved shade, having suitable capacity extensible type TPN Aluminium allloy Bus bars of high conductivity , DMC.SMC bus bar supports, with short circuit withstand capacity of 50 KA for 1 sec. bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of size 25mm x 6mm at the rear with 2 Nos. earth stud solid connections from main bus bar to switch gears with required 1.5 sqmm zero halogen fire retardant insulated copper condutor s/c cable, cable alleys, cable gland plate in two half.

-

-

-

... More
The panel shall be eqipped with relays, timers set of CTs for metering & protection and energy analyzer to indicate current phase, line voltage, frequency, power factor, KWH, KVARH, Provisionof over load, short circuit, restricted earth fault, under frequency control cabling and interlocking, suitable cable termination chambers/ bus bars extension and providing indicating lamps of phases for all feeders complete with foundation as per drawing and specifications amended conforming to IS 8623 and IEC 60439 and competibility to PLC system (IEC 61131-3) amended up to date complete as reqd.

-

-

-

... More
Incoming -1 form DG Synchronized panel

-

-

-

... More
1 No. 4000A 50 kA 4Pole EDO ACB with MP Based Release For O/C, S/C & E/F Protection, Motor 230Vac, Closing Coil 230Vac, S/T and Safety Shutter, 2NO+2NC Aux. Contact, Trip contact , T & C.etc.

-

-

-

... More
with ON,OFF,Trip ,RYB, indication, Digital KWH meter, Digital Amp and volt meter with selector switches etc.

-

-

-

... More
Incoming-2 from 2500KVA Transformer -2

-

-

-

... More
1 No. 4000A 50 kA 4Pole EDO ACB with MP Based Release For O/C, S/C & E/F Protection, Motor 230Vac, Closing Coil 230Vac, S/T and Safety Shutter, 2NO+2NC Aux. Contact, Trip contact , T & C. etc.

-

-

-

... More
with ON,OFF,Trip ,RYB, indication, Digital KWH meter, Digital Amp and volt meter with selector switches etc.

-

-

-

... More
with ON,OFF,Trip ,RYB, indication etc

-

-

-

... More
Out Going: supplying and fixing of following ACB and MCCB as outgoings

-

-

-

... More
a) 2 No's 2500A 50kA 4Pole MDO ACB with MP Based Release For O/C, S/C & E/F protection, Safety Shutter, 2NO+2NC Aux. Contact etc. with T & C.

-

-

-

... More
b) 3 No's 800A 50 kA 4Pole MDO ACB with MP Based Release For O/C, S/C & E/F Protection, Safety Shutter, 2NO+2NC Aux. Contact etc. with T & C.

-

-

-

... More
c) 3 nos. 400 A, TPN, 50 kA,MCCB with Microprocessor based O/C,S/C,&E/F, LSI Protection with rotary handle.

-

-

-

... More
d) 3 nos. 250 A, TPN, 50 kA,MCCB with Microprocessor based O/C,S/C,&E/F LSI Protection with rotary handle.

-

-

-

... More
e) 3 nos. 100 A, TPN, 50 kA,MCCB with Microprocessor based O/C,S/C,&E/F LSI Protection with rotary handle.

-

-

-

... More
all out goings with ON.OFF, indication. Digital multifunction meter . Digital Amp meter with selector switches etc.

-

-

-

... More
Each feeder having Multifunction Meter with RS485 communication port, Elite 446 is multi -line phase didgital panel meter for accurate and reliable measurement of electric parameters(V,I,W,F..etc.) for industrial and commercialapplications. Ithas a large multi line backlit display which enables four parameters to be displayed simultaneously.Modbus communication capability allows easy integration with energy monitorir system.Expansion modules can be fitted for enhane system integration(Pulse input/output or eathernet) Connection tyep:HV3/HV4/LV4 aplications, measurement Voltage:57.7/100V to 240/415V AC, Standards: IS13779,IS14697,IEC62052-11,IEC62053-21,IEC62053-23,IEC62053-22,IEC61010,IEC62053-31,Dimensions:96mmx96mmx65mm, Ingress Protection:IP-54, Load Survey: 6 parameters for 40days,at 30 minutes integration, Addiional Plug in modules: 2 pulse inputs,2pulse outputs module,4 analogue output module,Ethernet gateway module complete as reqd.

-

-

-

... More
Bus Bar

-

-

-

... More
4000A 415V, 3 phase 4 wire busbar (100% neutral) 50Hz Aluminium bus bar

-

-

-

... More
Note : All ACBs and MCCB's aux. contacts for ON/OFF and trip spare contacts to be wired upto terminal block.

1

10

-

... More
PLC Panel (PLC based manual & Auto over-ride)

-

-

-

... More
Supply, Installation, testing and commissioning of auto main failure (AMF), auto synchronizing, auto load sharing, auto load management based on demand feedback. PLC shall collect demand feedback from MFM in ATS panels/ transformer incomers & nececcasry wiring & communication from meter to PLC, auto change over/ inter locking DG control and operation programmable logic panel cubicle type made of 2mm thick CRCA sheet enclosure, powder coated, free standing, floor mounted, dust vermin proof, indoor suitable for 3x750 KVA DG sets complete with all measuring instruments, protective devices, alarm etc. as required for above functions rated & analogue input & output modules, input/ output racks, power supplies communication with PLC with communication cables etc. as required and degree of protection IP:52 & all relays shall be microprocessor based comprising,conforming to ( IEC 61131-3) and IS 8623 and IEC 60439 as complete reqd.

-

-

-

... More
Metering/ Monitoring (Synchronizing Equipment)

-

-

-

... More
Double Voltmeter 0-500 PTR 415/110V - Analog - 1No.

-

-

-

... More
Double frequency meter PTR 415V/110V-REED - 1No.

-

-

-

... More
Dark lamp / bright lamp- 2 Nos.

-

-

-

... More
3 Line Display Multifunction Meter - 6 Nos.

-

-

-

... More
Switch /selector/ PB

-

-

-

... More
Sychronizing Switch - 1 No.

-

-

-

... More
Set Selector Switch - 1No.

-

-

-

... More
Manual / Auto switch - 1 No.

-

-

-

... More
Test push Button Yellow with 1 No. Contact - 1No.

-

-

-

... More
Accept Push Button Blue with 1 No. Contact - 1No.

-

-

-

... More
Reset push Button Black with 1 No. Contact - 1No.

-

-

-

... More
Engine Start Push Button Green with 2 Nos. Contact - 3 Nos.

-

-

-

... More
Engine Stop Push Green with 2 Nos. Contact - 3 Nos.

-

-

-

... More
Circuit Breaker close Push Button Green with 1 No. Contact - 4 Nos.

-

-

-

... More
Circuit Breaker Trip Push Button Red with 2 Nos. Contact - 4 Nos.

-

-

-

... More
Emergency Stop Push Button Mushroom Red with 1 No. Contact - 3 Nos.

-

-

-

... More
Voltage Raise / Lower Joysticks with 2 Nos. Contact - 3 Nos.

-

-

-

... More
Speed Raise/ Lower Joysticks with 2 Nos. Contact - 3 Nos.

-

-

-

... More
LED - 1 set

-

-

-

... More
PLC Hardware (Sychronizing Equipment)

-

-

-

... More
PLC-CPU-Battery Free CPU with on board profibus/ ethernet part - 1 No.

-

-

-

... More
On line 2 KVA UPS for PLC & CPU for 30 minute backup

-

-

-

... More
PC based HMI (human machine interface) with core 2 Dup processor, 500 GB HDD, 2 GB RAM, DVD Writer, Optical Mouse Multimedia Key Board, 43" LED Monitor with Licensed Windows Operating System or Latest updated available hardware and software at the time of purchase.

-

-

-

... More
Digital Input Module - Minimum 16 CH per DG.

-

-

-

... More
Digital Output Module - Minimum 16 CH per DG.

-

-

-

... More
MMC (Micro Memory Card) 128 KB - 1 No.

-

-

-

... More
Software for PLC programming (licenced) with mimic diagram - 1 Set

-

-

-

... More
Licenced software for runtime application - 1 set

-

-

-

... More
PLC Sychronisations with following annunciation/ control features - 3 sets (1 for each DG set)

-

-

-

... More
Engine Fault Relay

-

-

-

... More
LLOP ON Delay

-

-

-

... More
Fuel Solenoid Relay

-

-

-

... More
Speed Lower Relay

-

-

-

... More
Speed Raise Relay

-

-

-

... More
Voltage Lower Relay

-

-

-

... More
Voltage Raise Relay

-

-

-

... More
Under Voltage Aux. Relay

-

-

-

... More
Trip Command Relay

-

-

-

... More
DC Failure Relay

-

-

-

... More
Reverse Power Relay

-

-

-

... More
Rotor Earth Fault Relay

-

-

-

... More
Loss of Excitation Relay

-

-

-

... More
check Synchronizing Relay (Synchromax of Conzerve or equivalent)

-

-

-

... More
Pilot Lights / Indications

-

-

-

... More
Pilot Light Amber 230V AC (DC Failure) - LED type - 1 No.

-

-

-

... More
Pilot Light Red 24V AC (on) - LED type - 6 Nos. (for DG set, TR I/C & B/C)

-

-

-

... More
Pilot Light Red 24V AC (off) - LED type - 6 Nos. (for DG set, TR I/C & B/C)

-

-

-

... More
Annunciator 12 channel for - 24V DC - 1 No. for synchronizing

-

-

-

... More
Power Supply

-

-

-

... More
230V AC / 24V DC, 10A, Stablises power Supplies with voltage trimmer - 1 set

-

-

-

... More
Maintenance Free Batter 12 V, 40AH - 2 Nos.

-

-

-

... More
Micellaneous Components

-

-

-

... More
Exhaust fan - 6" - 2 Nos.

-

-

-

... More
Control MCB - 1 Set

-

-

-

... More
Panel Light - 11W CFL - 2 Nos.

-

-

-

... More
Door Switch - 6A - 2 Nos.

-

-

-

... More
Space Heater - 65W - 1 No.

-

-

-

... More
Switch Socket - 5A / 15A, 6 pin - 1 No.

-

-

-

... More
Solid State Alarm 24V DC - 1 No.

-

-

-

... More
Terminals - 2.5 sqmm - 1 set

-

-

-

... More
Panel + Hardware

-

-

-

... More
Earth Bus - Copper - set

-

-

-

... More
Earth Links for Door Earthing

-

-

-

... More
Enclosure - 1 Set

-

-

-

... More
Filters - 1 Set

-

-

-

... More
Terminal Mounting Track - 1 Set

-

-

-

... More
Terminal Anchor End - 1 Set

-

-

-

... More
DG/ Bus monitoring PT's - 1 Set

-

-

-

... More
Suitable for 3 no's Incomer form (DG-1,DG-2,DG-3), 3 no's 1600A 50 kA 4Pole EDO ACB with MP Based Release For O/C, S/C & E/F Protection, Motor 230Vac, Closing Coil 230Vac, S/T and Safety Shutter, 2NO+2NC Aux. Contact, Trip contact etc.

-

-

-

... More
Out going 4000A 50 kA 4Pole EDO ACB with MP Based Release For O/C, S/C & E/F Protection, Motor 230Vac, Closing Coil 230Vac, S/T and Safety Shutter, 2NO+2NC Aux. Contact, Trip contact etc

-

-

-

... More
Suitable for Bus Bar 4000A/50 kA, 3 Ph, 4-wire, 50Hz, 4P Aluminium Busbar with Colour Coded Heat Shrinkable sleeves

1

10

-

... More
Supply installation testing and commissioning of cubical type DG synchronising panel (PLC based synchronising panel i.e through item no.5) for 3 x 750 KVA DG sets.suitable for 415V, 3 phase, 4 wire 50 Hz AC supply system fabricated in compartmentalized (preferable) design from CRCA sheet steel of 2mm thick for frame work and covers. 3mm thick for gland plated i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having suitable capacity extensible type FP Aluminium alloy Bus bars of high conductivity. DMC.SMC bus bar supports, with short circuit withstand capacity of 70 KA for 1 sec. bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of suitable size at the rear with 2 Nos earth solid connections from main bus bar to switch gears with required 1.5 sqmm zero halogen fire retardant low smoke insulated copper conductor s/c cable, cable alleys, cable gland plate in two half.

-

-

-

... More
The panel shall be equipped with relays, timers set of CT's for metering & protection and energy analyser to indicate current phase, line voltage, frequency, power factor, KWH, KVARH. Provision of over load, short circuit, restricted earth fault, under frequency control cabling and interlocking, suitable cable termination chambers/ bus bars extension and providing indicating lamps of phases for all feeders complete with foundation as per drawing and specifications amended up to date complete. and attached specification conforming to IS 8623 and IEC 60439 complete as reqd.

-

-

-

... More
3 no's Incomer form DG-1,DG-2,DG-3, 1600A 50 kA 3 Pole EDO ACB & Neutral contactor with MP Based Release For O/C, S/C & E/F Protection, Motor 230Vac, Closing Coil 230Vac, S/T and Safety Shutter, 2NO+2NC Aux. Contact, Trip contact etc.

-

-

-

... More
4000A,50 kA, 3 Ph, 4-wire, 50Hz, 4P Aluminium Busbar with Colour Coded Heat Shrinkable sleeves

-

-

-

... More
Out going 4000A 50kA 4Pole EDO ACB with MP Based Release For O/C, S/C & E/F Protection, Motor 230Vac, Closing Coil 230Vac, S/T and Safety Shutter, 2NO+2NC Aux. Contact, Trip contact etc.

-

-

-

... More
DG Synchroning through PLC panel (Auto/Mannual) . scope of this contract is excluding DG sets . However required inputs shall be provided for commissioning of DG sync panel before drawing approval.

1

10

-

... More
APFC & AHF panel

-

-

-

... More
Supplying , installation , testing and commissioning of 2 mm thick CRCA sheet cubical type floor mounted Activecomp - Hybrid series Hybrid Harmonic Filter and power mangement System panel (Capacitor Banks & Active Harmonic Filters) . as per specifications conforming to IS 16636 and IESC 61921 and IEC 61439 comlete as reqd.

-

-

-

... More
Controller

-

-

-

... More
3 Phase 3 CT Controller with inbuit load and Harmonic Analyser

-

-

-

... More
Modular Active Filter Unit

-

-

-

... More
IGBT Fired Modular (for Harmonic Mitigation)

-

-

-

... More
Switching

-

-

-

... More
SCR-SCR Type Solid State,trasnsient free switching module for capacitor Reactor Filter Banks

-

-

-

... More
Inductors

-

-

-

... More
Class - H insulation and exceptionally low temperature rise

-

-

-

... More
Capacitors

-

-

-

... More
Low loss DUCA power super Heavy Duty type in a 3 phase cylindrical aluminium case

-

-

-

... More
IGBT Fired Modular Active Filter Units

-

-

-

... More
Thyristor/Contactor Switched Tunde / Detuned Filter Units

-

-

-

... More
Touch Screen Display Unit for AHF

-

-

-

... More
High Filtration Efficiency

-

-

-

... More
Hybrid Technology

-

-

-

... More
Low Operational Cost

-

-

-

... More
Long Operational Life

-

-

-

... More
IGBT Fired Modular Active Filter Units

-

-

-

... More
Thyristor/Contactor Switched Tunde / Detuned Filter Units

-

-

-

... More
Touch Screen Display Unit for AHF

-

-

-

... More
High Filtration Efficiency

-

-

-

... More
Hybrid Technology

-

-

-

... More
Low Operational Cost

-

-

-

... More
Long Operational Life

-

-

-

... More
Enclosure Design: standardized bolted Modular Sheet Steel Eclosure - Non Compartmentalized

-

-

-

... More
Enclosure Finish: Epoxy Poweder Coated, in grey (RAL 7035) Structure finish

-

-

-

... More
Rated Design Voltage: 415V -440V, 50Hz,3 phase 3 wire

-

-

-

... More
Output Rating: 600 KVAR

-

-

-

... More
Duty: Continuous

-

-

-

... More
Capacitors: DUCA POWER Super Heavy Duty series

-

-

-

... More
Reactors : H-Class,Single layer Wound 200% Linearity, Al, high RMS current capability

-

-

-

... More
Switching:Heavy Duty Thyristor Switched,SCR-SCR type for 415V network

-

-

-

... More
Active Harmonic Filter:IGBT Fired modular AHF unit

-

-

-

... More
Display:Touch Screen/ Graphic Display with Power Quality Parameters

-

-

-

... More
Incoming: 3 pole ACB

-

-

-

... More
Outgoing:MCCB

-

-

-

... More
Ambient Temperature: 50° C max short time, 40° C average in 24 Hrs, 35° annual average. -10° C low limit

-

-

-

... More
Protection Class: IP 42

-

-

-

... More
Instruments & Indications: Real time power factor comtroller with Dual P.F Control & capable to show lag lead Kvah,display waveforms,RS-485,HMI unit for Modular AHF Units, SMPS supply,protection n each relay output,Auo manual selector switch

-

-

-

... More
Bus Bars: 0.8Amp Per Sq.mm, FP,Electrolytic grade AL. bus bar

-

-

-

... More
Capacity : 600 KVAR

-

-

-

... More
Incomer : ACB 1250 A, 3 P, 50 kA with microprocessor based O/C,S/C protection.

-

-

-

... More
Out Goings for Banks:

-

-

-

... More
For 2 No. 25 KVAR : MCCB 63 A, 3 P, 36 kA with adjustable O/L, S/C, release & ROH and 63 A TP capacitor duty contactor with 2NO+2NC.

-

-

-

... More
For 3 no's 50 KVAR : MCCB 125 A, 3 P, 36 kA with adjustable O/L, S/C, release & ROH and 110 A TP capacitor duty contactor with 2NO+2NC.

-

-

-

... More
For 4 no's 100 KVAR : MCCB 250 A, 3 P, 36 kA with adjustable O/L, S/C, release & ROH and 250 A TP capacitor duty contactor with 2NO+2NC.

-

-

-

... More
Banks: 2No's 25 kVAR, 3 No.s 50 kVAR, ,4 Nos. 100 kVAR with APP heavy duty Capacitors and seven percent copper wound reactors.

-

-

-

... More
APFC Relay : 12 stage

-

-

-

... More
Outgoings (Active Filter Section) (i) 630A TP MCCB,36 kA with O/L & S/C protection, On OFF,Trip Indication. (ii) 400A Active filter 3P 4W with suitable rating of Modules in IP-30 emclosure with provision of adding 125A future each module should have individual protection.

-

-

-

... More
Metering: Digital Volt and Amp meter, exhaust fan, LED type indicating lamp, controlling system etc.Each feeder having Multifunction Meter with RS485 communication port, Elite 446 is multi -line phase didgital panel meter for accurate and reliable measurement of electric parameters(V,I,W,F..etc.) for industrial and commercialapplications. Ithas a large multi line backlit display which enables four parameters to be displayed simultaneously.Modbus communication capability allows easy integration with energy monitorir system.Expansion modules can be fitted for enhane system integration(Pulse input/output or eathernet) Connection tyep:HV3/HV4/LV4 aplications, measurement Voltage:57.7/100V to 240/415V AC, Standards: IS13779,IS14697,IEC62052-11,IEC62053-21,IEC62053-23,IEC62053-22,IEC61010,IEC62053-31,Dimensions:96mmx96mmx65mm, Ingress Protection:IP-54, Load Survey: 6 parameters for 40days,at 30 minutes integration, Addiional Plug in modules: 2 pulse inputs,2pulse outputs module,4 analogue output module,Ethernet gateway modu

2

10

-

... More
Earthing

-

-

-

... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

20

10

-

... More
Supplying & fixing 50mm x 6mm thick GI earth strip in ground / surface or in recess for connection etc. as reqd.

500

10

-

... More
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

100

10

-

... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

8

10

-

... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

50

10

-

... More
HT & LT cable

-

-

-

... More
Supply of one no. 3 core 240sq.mm A2XFY, XLPE insulated PVC sheathed 11kV (E) /6.6 kV(UE) grade XLPE HT power cables (heavy Duty) aluminium conductor,steel armoured cable, as per IS 7098 part-2 complete as required.

-

10

-

... More
Supply of one no. 3 core 95sq.mm A2XFY,XLPE insulated,PVC sheathed 11kV (E) /6.6 kV (UE) grade XLPE HT power cables (heavy Duty) aluminium conductor,steel armoured cable as per IS 7098 part-2 complete as required.

300

10

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11kV (E) /6.6 kV(UE) grade of following size direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required.

-

-

-

... More
upto 120 sq. mm

100

10

-

... More
Above 120 sq. mm and upto 400 sq. mm

-

10

-

... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required

-

-

-

... More
upto 120 sq. mm

50

10

-

... More
Above 120 sq. mm and upto 400 sq. mm

-

10

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

-

-

-

... More
upto 120 sq. mm

50

10

-

... More
Above 120 sq. mm and upto 400 sq. mm

-

10

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11kV grade of following size in the existing masonry open duct as required.

-

-

-

... More
upto 120 sq. mm

100

10

-

... More
Above 120 sq. mm and upto 400 sq. mm

-

10

-

... More
Supplying of one No. 3½C x 400 sq.mm. A2XFY, XLPE insulated steel armoured aluminium conductor power cable of grade 1.1 kV PVC sheathed power cables (heavy duty) confirming to IS 7098 (Part-1) aluminium conductor, steel armoured cable as reqd complete in following manners.

-

10

-

... More
Supplying of one No. 3½C x 240 sq.mm. A2XFY, XLPE insulated steel armoured aluminium conductor power cable of grade 1.1 kV PVC sheathed power cables (heavy duty) confirming to IS:7098 (Part-1) aluminium conductor, steel armoured cable as reqd complete in following manners.

200

10

-

... More
Supplying of one No. 3½C x 95sq.mm. A2XFY, XLPE insulated steel armoured aluminium conductor power cable of grade 1.1 kV PVC sheathed power cables (heavy duty) confirming to IS:7098 (Part-1) aluminium conductor, steel armoured cable as reqd complete in following manners.

300

10

-

... More
Supplying of one No. 3½C x 35sq.mm. XLPE steel armoured aluminium conductor power cable of grade 1.1 kV PVC sheathed power cables (heavy duty) confirming to IS:7098 (Part-1) aluminium conductor, steel armoured cable as reqd complete in following manners.

200

10

-

... More
Supplying of one No. 2C x 10sq.mm. A2XFY, XLPE insulated steel armoured aluminium conductor power cable of grade 1.1 kV PVC sheathed power cables (heavy duty) confirming to IS: 7098 (Part-1) aluminium conductor, steel armoured cable as reqd complete in following manners.

250

10

-

... More
Supply of the 7 core x 2.5 sq.mm control cable of 1.1Kv grade armoured XLPE insulated sheathed copper Conductor as per IS 7098 part-1.

250

10

-

... More
Laying of one no. number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground i/c excavation, sand cushioning, protective covering and refilling the trench etc as reqd.

-

-

-

... More
Upto 35 sq. mm

275

10

-

... More
Above 35 sq. mm and upto 95 sq. mm Metre

120

10

-

... More
Above 185 sq. mm and upto 400 sq. mm

2175

10

-

... More
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required

-

-

-

... More
Upto 35 sq. mm

-

10

-

... More
Above 35 sq. mm and upto 95 sq. mm Metre

45

10

-

... More
Above 185 sq. mm and upto 400 sq. mm

2000

100

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required

-

-

-

... More
Upto 35 sq. mm

-

10

-

... More
Above 35 sq. mm and upto 95 sq. mm Metre

45

10

-

... More
Above 185 sq. mm and upto 400 sq. mm

500

10

-

... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required

-

-

-

... More
Upto 35 sq. mm

-

10

-

... More
Above 35 sq. mm and upto 95 sq. mm Metre

45

10

-

... More
Above 185 sq. mm and upto 400 sq. mm

500

10

-

... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required

-

-

-

... More
Upto 35 sq. mm

-

10

-

... More
Above 35 sq. mm and upto 95 sq. mm Metre

45

10

-

... More
Above 185 sq. mm and upto 400 sq. mm

25

10

-

... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.

-

-

-

... More
150 mm dia

50

10

-

... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc. as required

-

-

-

... More
50 mm Dia

100

10

-

... More
80 mm Dia

100

10

-

... More
100 mm Dia

1200

10

-

... More
Supplying and laying Insulating mat "Shock safe" in front of electrical panels, complete as requied rubber mat of standard size 3.0 mm thick for up to 22 kV class B confirming to IS 15652 as required complete.

30

10

-

... More
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 kV grade as required

-

-

-

... More
95 Sq.mm

12

10

-

... More
240 sq.mm.

18

100

-

... More
Supplying and making end termination with brass double compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable/control cable of 1.1kV grade as required.

-

-

-

... More
2 x 10 Sq.mm (with Aluminium Lugs)

25

10

-

... More
3½ C x 35 sq.mm. (with Aluminium Lugs)

6

10

-

... More
3½ C x 95 sq.mm. (with Aluminium Lugs)

6

10

-

... More
3½ C x 240 sq.mm. (with Aluminium Lugs)

6

10

-

... More
3½ C x 400 sq.mm. (with aluminium Lugs)

60

10

-

... More
7 C x 2.5 sqmm (with copper Lugs)

20

10

-

... More
Digging trench for taking out cable and refilling , watering ,ramming the sameafter taking out cable as reqd complete.cable size up to 400Sq.mm

300

10

-

... More
Lifting removing cable up to 400 sq.mm. size from trench/clamps, making role & depositing the same in departmental store I/c cartage.

300

10

-

... More
Dismentling of brass compression type gland up to 400 sq. mm. Cable

15

10

-

... More
Supplying and fixing carbon diaoxide ( CO2) type fire extingushers confirming to IS 2878:1976 and cylinder fully charged of following capacity.

-

-

-

... More
4.5 Kg. fire extinguisher wall mounted

30

10

-

... More
9 Kg. fire extinguisher trolly mounted

30

10

-

... More
Supply,fixing of 4 no's FIRE bucket 9.5 liters capacity GI bucket i/c filling sand, painted in post office red clour with prior coat of red oxide paint and writte with white paint 'FIRE' and mounted on MS angle iron frame with bracket with 35 x 35x 5 mm size angle in required shape,1.5mm MS sheet shed covered i/c cutting, welding, as standard specified suitable for Electrical substations & as directed by EIC.

5

10

-

... More
Fixtures & fittings

-

-

-

... More
Supplying and fixing exhaust fan 450 mm sweep (18") with louvers/ shutter in existing opening including connections, testing & commissioning etc. as reqd.

3

10

-

... More
Supply and fixing of 1 X 20W LED fitting, IP20 , 2000 lumen output, 6500k, aluminium housing, polycarbonate cover, surface mounted, 140V-270V operating Volt. etc. complete with all fixing accessories approved make as required complete.

10

10

-

... More
Supply and installation testing and commissioning of 36W LED 2'x2' fittings surface mounted, IP20, 3300 Lumens colour temperature 6500 K, with metallic CRCA powder coated housing cover high efficiency diffuser, THD less than10, power factor above 0.9. approved make as required complete.

60

10

-

... More
Supply and fixing testing and commissioning of 40 Watt garden light/ postop lanterndecorative post top for 360 degree indirect light with IP65 protection resistance to impact and corrosion Gkare free and better uiniformity with high power LEDs, luminaires on the existing pole, approved make as required complete.

10

10

-

... More
Supply and installation testing and commissioning of 18W LED round and square surface mounted LED panel PDC alluminium housing and high transiucent, IP20, 2000 Lumens colour temperature 6500 K, with metallic CRCA powder coated housing cover high efficiency diffuser, THD less than10, power factor above 0.9 approved make complete as required.

20

10

-

... More
S/F testing commissioning of street light Luminures. Endura sundown 45W LED , die-cast aluminium IP66,make:havells or its equvalent, on the existing street light pole,approved make complete as required.

10

10

-

... More
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

10

100

-

... More
Supply, installation testing and commissioning of 5 star rating ceiling fan 1200mm sweep, 320 rpm, 230 CMM air delivery full copper wound motor, white powder coated, without regulator with down rod of standard length (up to 30cm) with 1.5 sqmm PVC copper single core wire. etc as required complete.

40

10

-

... More
Numbering of ceiling fan/exhaust fan / street light poles fitting/ as reqd.

150

10

-

... More
S&F extra down rod of 10 cm length seam less conduit pipe, 15 mm dia heavy gauge, I/c painting etc. as reqd. (Note: More than 5cm length shall be rounded off to the nearest 10 cm and 5 cm or less shall be ignored).

25

10

-

... More
Supply & fixing of 65 mm dia.'B' class GI pole 4.5 mtr. Long for post top lantern i/c bas plate 300 x 300 x 3mm GI reducer & nipple for mounting the fitting with painting etc. grouting in cement concrete 1: 3: 6 (1 cement : 3 coarse sand : 6 grade stone aggregate 40mm complete as reqd.

10

10

-

... More
Internal wiring

-

-

-

... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and Earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

-

-

-

... More
Group B

70

10

-

... More
Group C

70

10

-

... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed steel conduit,2 way modular type switch, modular plate, suitable GI box and Earthing the point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

5

10

-

... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, and Earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

-

-

-

... More
Group B

50

10

-

... More
Group C

50

10

-

... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

-

-

-

... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

100

10

-

... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

100

10

-

... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire

100

10

-

... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire

100

10

-

... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire

50

10

-

... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required.

-

-

-

... More
1x 1.5 sqmm

100

10

-

... More
4 x 1.5 sqmm

100

10

-

... More
4 x 4.0 sqmm

100

100

-

... More
6 x 6 sq. mm

50

10

-

... More
Supplying and drawing of following sizes of FRLSH PVC insulated copper conductor, 3 core round cable of following size in the existing surface/ recessed steel/ PVC conduit as required.

-

-

-

... More
1.5 sq. mm

100

10

-

... More
S & F 40 amp to 63 amp rating 240 volts 'C' curve 10 kA MCB of following pole in the existing MCB DB complete with connection, testing & commissioning etc as reqd. ( legrand)

-

-

-

... More
Triple Pole

4

10

-

... More
Four Pole

2

10

-

... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

40

10

-

... More
Supplying and fixing of following sizes of steel conduit along with accessories in surface / recess including painting in case of surface conduct, or cutting the wall and making good the same in case of recessed conduit as required.

-

-

-

... More
20mm dia 16 SWG

100

10

-

... More
25mm dia 16 SWG

50

10

-

... More
32 mm dia 16 SWG

50

10

-

... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

-

-

-

... More
3 Module (100mmX75mm)

50

10

-

... More
6 Module (200mmX75mm)

50

10

-

... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as reqd.

-

-

-

... More
180 x 100 x 60 mm deep

10

10

-

... More
200 x 250 x 75 mm deep

10

10

-

... More
250 x 300 x 100mm deep

10

10

-

... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

-

-

-

... More
5/6 amp switch

50

10

-

... More
15/16 amp switch

50

10

-

... More
3 pin 5/6 amp socket outlet

50

100

-

... More
6 pin 15/16 Amp. Socket outlet

50

10

-

... More
Telephone socket outlet

5

10

-

... More
stepped type fan regulator

40

10

-

... More
modular blanking plate

50

10

-

... More
Supplying and fixing 3 pin, 5 amp. ceiling rose on the existing junction box/wooden block I/c connection etc. as reqd.

50

10

-

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single Pole

72

10

-

... More
Single Pole & Neutral

8

10

-

... More
Supplying and fixing following way prewired vertical type TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, terminal connectors for all incoming and outgoing circuits, duly prewired with adequate size of FRLS PVC insulated copper conductor up to the terminal connector/ neutral link, Earthing etc. as required (But without MCB/ RCCB/ Isolator). (Note : Prewired vertical type MCB TPDB is normally used where 3 phase outlets are required.)

-

-

-

... More
12 way double door (4+36)

2

10

-

... More
Providing & fixing MV danger notice plate of 200mm x 150mm make of mild steel at least 2mm thick vitreous enamelled white on both sides and with inscriptions in signal red colours in front side as reqd.

4

10

-

... More
Providing & fixing HT danger notice plate of 250mm x 200mm make of mild steel at least 2mm thick vitreous enamelled white on both sides and with inscriptions in signal red colours in front side as reqd.

4

10

-

... More
Supplying and laying chequered plate in cut pcs of 6mm thick with handle cutting/ welding as required complete.

50

10

-

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Cold twisted bars

-

-

-

... More
Cold twisted bars

100

10

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

-

-

-

... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural nsources : 6 graded stone aggregate 40 mm nominal size derived from natural sources)

5

10

-

... More
Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in;

-

-

-

... More
cement mortar 1:4 (1 cement : 4 coarse sand)

5

10

-

... More
15 mm thick cement plaster on the rough side of single or half wall of mix;

-

-

-

... More
1:4 (1 cement : 4 fine sand)

10

10

-

... More
Supplying and fixing 'C' Channel of size 100 x 50 mm ISMC in cut sizes i/c cutting/ welding as required complete.

70

100

-

... More
Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift up to 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres.

10

10

-

... More
Supplying and laying of 32mm (8Kg / cm²) HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 4984, Part II complete with fitting and cutting, jointing etc. in the existing open duct, complete as required.

200

10

-

... More
Supplying and laying of 63mm (8Kg / cm²) HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 4984, Part II complete with fitting and cutting, jointing etc. in the existing open duct, complete as required.

50

10

-

... More
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

200

10

-

... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

50

10

-

... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

200

10

-

... More
Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required.

-

-

-

... More
1 run of cable

250

10

-

... More
2 run of cable

250

10

-

... More
Drawing of optical cable enhanced CAT6 cable in existing steel conduit pipe/GI pipe/raceway/RCC pipe as required. The cost shall also include numbering of networking wire from room to rack as required (Cat 6 cable supplied by the department)

250

10

-

... More
Fixing of RJ-45 modular box with cover plate or I/o box for internet on surface/ recessed cutting the wall making good the same as required. ( box and cover plate will be supplied by dept.)

10

10

-

... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

-

-

-

... More
125 A,16KA,TP MCCB

2

10

-

... More
Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

3

10

-

... More
S&F, connecting and commissioning looping type cable end control box with 2mm fabricated CRCA sheet of size 200 mm x 200 mm x 125 mm having 1 no. 6amp to 32 amp SPMCB 250 volt and 2 nos. brass neutral link square rod 6 way and fixed on 3mm thick bakelite sheet. Box shall have almirah type hing and panel key type lock front door duly painted with earthing strud etc. complete as required

10

10

-

... More
Supply & fixing shock treatment chart duly mounted on a wooden frame with 5mm thick glass approximate frontara 1.20 sq.meter.

5

10

-

... More
Supply & fixing safety instruction chart duly mounted on a wooden frame with 5mm thick glass approximate frontara 1.20 sq.meter.

5

10

-

... More
Supply & fixing of 35x35x5mm or higher size angle iorn in required shape and size including cutting,welding,painting complete required as directed by the Engineer Incharge

50

10

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.