Indian Institute Of Information Technology Tender

Al. Partition work in room no. 2105, CC-I at IIIT-A(AS PER BILL OF QUANTITY ANNEXURE-III)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) ( DSR-2018, no. 21.1.2.3) Partition section size : 63.0 mm x 38.10 mm and Door section size : 81.25mm x 38.10mm of Make - Jindal Aluminium Ltd. / Hindolco / Triveni Industries Ltd or Equivalent

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). DSR-2018, No. 21.17, Make - Jindal Aluminium Ltd. / Hindolco / Triveni Industries Ltd or Equivalent