Harish Chandra Research Institute Tender

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including structting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, Fixing with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477,in average 3mm thickness. including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Size of Tile 600 x 600 mm

Providing and fixing 20 mm dia nominal bore G.I. pipes for internal work complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.

Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm C sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : one or more coats

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade one or more coats

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter

Providing and fixing 40mm PVC Pipe For Drainage

Providing and fixing 75mm PVC Pipe For Drainage

Providing and fixing 100mm PVC Pipe For Drainage

Providing & Fixing white glazed vitreous china urinal of Hindware(60010)/ Kohler (5017in-er-0) including C.I. hangers, CP spreader, 32 mm CP brass domical waste/ stainless steel jali to prevent napthelene balls from getting flushed, 40 mm CP cast brass bottle trap and pipe to wall with CP flange with AC & battery operated automatic flushing system of Jaquar/ Kohler (8791k-c02-cp) with electric wiring from sensor to solonoid valve for individual urinals, to ensure flushing only when in use, comprising of all plumbing, electronic items including infrared for full functioning of the automatic sensor and urinal complete. please note the entire piping including spreaders, pipes from sensor to urinal etc shall be completly concealed.

Providing and fixing first quality white vitreous china, Oval shape under counter Wash Basin of Hindware(10045)/ Kohler (K-2075IN) with M.S. or CI brackets, 32mm dia C.P. brass Bottle Trap, CP waste Couppling, CP inlet connection and other ancillary fittings including painting of fitting.

Providing & fixing 12 mm tk. toughened glass partitions of 4'x 2' each in toilets to be used as urinal partitions fixed in place using sevax fittings as per detailed drg T3

Providing and fixing first quality white vitreous china, wall hung wash basin with full pedestal of Jaguar ,Hindware,Kohler with M.S. or CI brackets, 32mm dia C.P. brass Bottle Trap, CP waste Couppling, CP inlet connection and other ancillary fittings including painting of fitting.

Providing and fixing C.P brass angle valve of ESS/ Jaquar/ Kohler for basin mixer,Geysers,health faucet, Shower & WC points of approved quality confirming to IS:8931 15 mm nominal bore.

Supply & fixing of Jaquar 2 way bib tap with chrome finish opp-CHR-15041 PM by Jaquar (Brands/jaquar,Plumber)

Providing and fixing C.P brass Basin Mixture/Wall mixture of ESS/ Jaquar/ Kohler for counter wash basin ,approved quality 15 mm nominal bore.

Supply & fixing of Hindwair toilet roll holder with flap stainless steel

Providing & Fixing of C.P. hand spray (health faucet) of ESS/ Jaquar/ Kohler with push button control and flexible hose connection with C.P. holder for hand spray complete in all respects.

Supply & fixing of Supreme 110 mm PVC nahani trap WOJ

Providing and fixing stainless steel jali (grating) with or without hole for waste pipe for floor Nahani trap. 100mm nomimal dia

Ventilator wair mesh with teak wood frame work (thickness of wood 45mmx45mm ) as directed by Engineer in charge.

Supply & fixingSteel Robe Hook 3 Pin

Supply & fixing of 125mm steel door handle

Supply & fixing of 150mm stainless steel tower bold

Mirror : Providing and fixing full length mirror 6mm thick of Saint Gobain make above counter using 25 mm Stainless steel 304 grade studs fixed to walls with SS 304 grade spacers on 25 mm with spacers installed on all 4 corners of mirror of smaller sizes upto 600 mm wide & additional studs fixed at every 1000 mm at to & bottom for larger sizes. the glass shall be bevelled on the perimeter all around for a distance of 25 mm. the rates quoted are complete in all respects including fixing of studs, rawl plug, holes in glass bevelling etc complet in all respects.