Haridwar Roorkee Development Authority Tender

Supply installation testing & commissioning of exterior rated LED RGB / RGBW Diffused flexible LED linear fixture with side/top bendable feature of 18 Watt per meter. Silicon covered fixture with system lumen output more than 900 lms /Meter. Standard Length of LED Strip should be 1/3/ 5 Mtr and to be used as per site requirement. it shall be capable of producing dynamic color changing light for with 16 million colors and should be programmable using 8 bit control DMX512 protocol / Ethernet based control. The fixture should have inbuilt decoder to change the colors in every 100mm length and have IP 67 protection with inbuilt IP67 connectors at both ends. LED fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C. Life time shall be at least L70B50 @ 35000 burning hours at 50°C. LED should of make Nichea, Osram, Cree, Lumiled, Hongya, Hongli of 5050 SMD package only. The rated voltage of the Luminaire should be 24VDC, . The product should be BIS approved with R number mentioned on product label. Product test reports - LM79, BIS Report and LEDs Test Reports submitted during the supply. Luminaire shall be conforming to BIS i.e. IS 10322 (PART 5/SEC 7). It shall be complete with all necessary mounting accessories required for proper working of fixture including driver, aluminum profile(flexible/rigid) as per application, weather proof connection cables, water proof connectors etc. as required.

Supply installation testing & commissioning of 55W RGBW LED Flood light, suitable for highlighting architectural features. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 communication protocol. Operating temperature: -20 °C to +50 °C, LED life L70B50: 70000 hours at 50°C. Lumen output should be of 2750 Lumens with Full LED on. CRI = 80 for white LED, Housing made of Pure polyester powder coated Aluminum die cast housing in White finish with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant, PMMA Lens, Beam angle of different types such as narrow(10˚), medium(25˚), wide(40˚,60˚) or elliptical(18˚x 35˚) as per the site requirement. Fixture should be Toughened glass cover of 4mm thickness with High Impact Resistance strength of IK07 and IP66. LED should be of Osram/Lumileds/Cree, Built-In Potted IP66/67 electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection of 10kV with externally attached SPD. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc.

Supply installation testing & commissioning of exterior rated Architectural RGBW Linear LED Wall Washer luminaire; suitable for facade lighting with extruded aluminium housing, powder-coated finish, Clear toughened glass of 4mm thickness with lens positioned screening to reduce the light spillage and die casted end caps. Total System wattage not exceeding 40W with system lumen output should be more than 2000 lm with all LEDs on. Luminaire shall be capable of producing dynamic color changing light with 16 million colors as the light fixture should be programmable using 8 bit control DMX512 protocol based control. Luminaire should be complete with dedicated Lens made up of UL/VDE approved PMMA for each LED, offering beam angle of different types such as narrow(10˚), medium(25˚), wide(40˚,60˚) or elliptical(18˚x36˚) as per the site requirement. Fixture should have Height 50mm ± 5% including surface mount base width 50mm ± 5% , length 1000 mm ± 5% with constant locking hinges for simple position control from various angles without special tools. DMX enabler circuit should be inside the Luminaire only. The rated voltage of the Luminaire should be 240Vac, Luminaire shall be offered with integral BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, LED Driver should have Operating input voltage range: 90-305VAC, PF 0.90. Life time of LED driver should be 80,000 hours and MTBF of LED driver should be ≥ 2,00,000 hrs, Led driver must have SELV output and Case temperature i.e. Tc ≥90°C. Fixture should be available with 10KV SPD in CM/DM Mode. Fixture's DMX Signal cable should be available with proper loop in loop out features. Fixture shall be suitable to operate at an ambient temperature range of -20°C to 50°C and complete luminaire shall be IP66 and IK07 rated. LED Life time shall be at least L70B50 @ 50,000 burning hours at 50°C. LED should be with ceramic package of make Nichea, Osram, Cree, Lumiled only. The product should be BIS approved with R number mentioned on product label. To be supported with Product test reports - LM79, BIS Report and LEDs Test Reports. Luminaire shall be conforming to BIS i.e. IS 10322 (Part 5/Sec 5) and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required.