Hapur Pilakhua Development Authority Tender

S/E of Double pole stucture ( FOR POLE / PLINTH MOUNTED TYPE TRANSFORMER TYPE SUBSTATION )12mt. long 410 SP-62 ST pole (259 Kg) support grouted in 1:3:6 (cement coarse sand 6 graded stone aggregate 40 mm nominal size) including 30 cm high plinthing from ground level with the cost of 3 no 100 x 50 x 6mm 2.24 Mr long Chanel and 3 no. 75 x 40 x 6mm 2.24 Mtr lon Chanel and With D.O. Fuse set , T.P.M.O. switch , anticlimbing device and paintig of pole Complete with all material lab. T&P etc required for proper completion of work or as direction of E/I. (AR)

Supply, Installation, Testing and commissioning of 100 Kva 11/0.433kv Aiuminium/copper wound distribution T/F Level-1or 2 Rating complete as per UPPCL specification etc all complete (AR)

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 717/2018

Supply and laying of 32mm x 6mm copper strip from earth electrode directly in the ground as required complete in all respect.PWD SOR 718/2018

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.PWD SOR 501/2018

150 sq. mm 3-1/2 core

50 sq. mm 3-1/2 core

16 sq. mm 2 core

10 sq. mm 4 core

6 sq. mm 2 core

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer Incharge. PWD SOR 503/2018

16 sq. mm 2 core

50 sq. mm 3-1/2 core

150 sq. mm 3-1/2 core

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.PWD SOR 504/2018

16 sq. mm

50 sq. mm

70 sq. mm

150 sq. mm

S/F of danger Board complete with clamps, bolts & nut complete in all respect as per direction of E/I. S.I 1109/18

Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.DSR/ 12.38/18(2304-16.16%=1931.67)

Supplying and making cable route marker with cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required..DSR SI No.7.9/2018 (530-16.16%=444.35)

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.. SI No. 703 PWD SOR/18

Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect.PWD SOR 705/2018

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. DSR 14.16.2 / 14.16.3 / 18

120 mm dia (OD-120 mm & ID-103 mm nominal) (341-16.16%=285.89)

90 mm dia (OD-90 mm & ID-76 mm nominal) (249-16.16%=175.23)

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. ( The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.(Rate analysis attached)) Incoming 200 Amp. MCCB-1 Nos. Outgoing 63 Amp.MCCB-4 Nos. & 32 Amp. 4 pole MCB-5Nos.

S&F of 320 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.PWD SOR 380/2018

S&F of 32 Amp. 240 V DP metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respect.PWD SOR 305/2018

Supply and erection of 63 Amp. TPN tap off box on rising mains complete with HRC fuses etc. complete in all respect. PWD SOR 913/2018

Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD SOR 1131A/2018

Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked.( The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion of work PWD SOR 1142/2018 )

Earth work in cutting or in embankment in ordinary soil excatavion to be in the form of regular pits not exceeding 0.50M in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50m. lift and 30 m. lead the earth from cutting to be used in making embankment or to be deposited as spoil bands with-in 30m. distance as directed by the Engineer incharge excluding Royallity. Wherever applicable for small work or abadi area. (Where machine can not reach/move) ( PWD Civil SOR 2018)SI no. 253a

cement Concrete with 4 cm gauge approved stone ballast , coarse sand & cement and proportionof 4:2:1 including supply of all materials labour Tools & plants etc. requried for proper complition of work. 1x4.5x1.5x0.5 ( Rates PWD SOR Civil 279A/2017

Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect CAT- AAA PWD SOR 1402/2018

Supply and wiring of submain with two number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable t in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit, complete in all respect (SUB Main in Conduit on Surface) PWD SOR 1301C/2018

Supply and fixing of 2/3/4 ways round PVC junction box confirming to ISS for 20mm dia PVC conduit concealed in wall, keeping its level upto plaster duly provided with proper size cover, screwed as directed at site by the Engineer I/C with supply of all the material, labour and T&P required for proper completion of work.PWD SOR 154 A/2018

S&F of 250 Amp 4 pole MCCB (25 KA) Thermal Magnetic release CAT A PWD SOR 1021 G/2018

S & F surface/Flush mounting 4ways V TPN distribution board without additional Door without DPX3 160 MCCB complete in all respect, as directed at site by Engineer in charge. CAT A PWD SOR 1030/2018

Construction of 125 Kva disel genrator set foundation complete with all materials , labour tool & Plant etc. in all respect as per dircetion engineer incharge. Analysis of rate attached. (A.R.)

Shifting of 125 kva DG set on foundation plinth by meen fo crain/ hydroulic liftor.( Rate taken from PWD SOR Civil 2017 Chaptor-2 SI No.-31 J.C.B. including POL & Driver)

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable inPVC conduit with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit.,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .PWD SOR 121C/2018

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect. CAT- AAA PWD SOR 1413/2018

Wiring Point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. , GP Box and piano type switch and socket etc. complete in all respect. PWD SOR SI NO. 124(C)

M-15 Brick (laid flat) on edge floor laid dry joints sand filled including preparation of base to proper slop and its ramming incliuding supply of all materials labour and tools and plants etc. required for proper completion of the work. CIVIL SOR SI NO.619/17

Dismantling cement concrete or brick of granolithic floors including base concrete and including stacking of dismantled materials as direted by Engineer-in-charge within a distance of 60 metre (200 feet) CIVIL SOR SI NO.697/17

Supply & fixing of 10 mtr GI Octagonal Pole of approved make (top dia 100mm, Bottom dia 200mm and base plate 16 mm thik) having 3mm thikness with single arm bracket (1 Mtr length) in 1:2:4 RCC foundation including the cost of undation, foundation bolts, excavation & back filling and Required T&P completee in all respect. PWD SOR S.I. No. 649/2018(27920-1012=26808.00)(Rates are Pole street light bracket @ Rs. 1012.00 DSR No. 12.34)

Supply and fixing of factory wried integral LED flood light luminaires having die cast aluminium body and diffuser with driver set suitable for 170 TO 200 Watt. Confirming to IP 66 and above Protection complete in all respects CAT- AAA PWD SOR S.I. No. 1455/2018

S/F of Rectanguler 50 x50 x6mm M.S. angle iron and 50x5mm M.S. flate iron pole top bracket for 4 No. flood light. Analysis Rate

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. PWD SOR 807/2018 25 A TPN

S/F of 32 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respects. CAT -B PWD SOR S.I. No. 315/2018