Hapur Pilakhua Development Authority Tender

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 170 TO 200 Watt. Confirming to IP 65 and above Protection complete in all respects CAT- AAA PWD SOR S.I. No. 1455/2018

Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. DSR 15.4.3/2018 @8831-4%=8477.76

3 output (1output per phase) and suitable for three phase supply.

Supply and eretion of 32 Amp. TPN tap off box on Rising Mains complete with HRC fuses etc. complete in all respect. PWD SOR S.I. No. 912/2018

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-incharge.

16 sq. mm

M.S. or iron work of heavy size such as trusses , built up gates, record racks, roof work , Gates including rivetting or welding where necessary, PWD SOR Civil S.I. No. 503 /2017 ( Roaled Steel Beam Size 150 x 50 mm )

Supply and burying of 40mm dia x 4.5 meters long G.I. pipe vertically for earthing having 12 mm dia. holes spaced 75 mm apart drilled up to 2 meter from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) up to switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal / coke and salt at least 150 mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.PWD SOR S.I. No. 701/2018

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required.DSR 14.15.1/2018

63 mm dia (OD-63 mm & ID-51 mm nominal) @109-4%=104.64

Cement concrete with 2 cm gauge approved stone grit coarse sand & cement in the proporetion of 4:2:1including supply of all material labour tool and plant etc. required proper completion of the work. SIN-279(a)

S/L of HDPE pipe 200mm dia at depth of 3.5mtr.below ground level horizontel boring with drilling / boring machine rates are includes supply of HDPE pipe and Trunchless horizontal borring complete in all respect as per direction of E/I.

Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc. at the top of the Mast complete in all respect.CAT AAA PWD SOR 409/2018

S/F of 32 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respects. CAT -B PWD SOR S.I. No. 315/2018

Detailed Specfication of LED Street Light

S/F of 45-50 watt factory wired LED light fitting, having pressure di-cast aliminium housing, complete LED light fitting must be approved from Bueru of Indian Standard- IS-10322(Part 5/Section 3) 2012 and conforming IP-66/67 proctection level, follow LM-78/79 test report and approved in AAA catagary in UP PWD Lucknow. LED fixture must have proper heat desipation. working temprature 5-50 degree celcious, having surge proection, for electronic driver, Surge protection device having 10 KA rating. Driver efficency more then 85%, CR70, Driver must have voltage regulation from 140-280 v, 50 Hz. , lumen out put of LED module must be 100-Lum per Watt, warm white colour, Each LED module must have optical lance for uniform distribution of light. These LED light fixture will be installed on the 50mm dia- 5mm thickness B class GI pipe bracket bended on suitable angle fixed with 50mm x 6mm iron pole clamp (2 set) with nuts and bolts. For connection of these LED light having 40/76 fiexible copper wire or 2.5mm strended 2 core- pvc insulated PVC sheathed aluminum cable with suitable langht.