Hapur Pilakhua Development Authority Tender

Supplying and making cable route marker with cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required..DSR SI No.7.9/2022 (585-16.16%=490.05)

S/E of Double pole stucture ( FOR POLE / PLINTH MOUNTED TYPE TRANSFORMER TYPE SUBSTATION )12mt. long 410 SP-62 ST pole (259 Kg) support grouted in 1:3:6 (cement coarse sand 6 graded stone aggregate 40 mm nominal size) including 30 cm high plinthing from ground level with the cost of 3 no 100 x 50 x 6mm 2.24 Mr long Chanel and 3 no. 75 x 40 x 6mm 2.24 Mtr lon Chanel and With D.O. Fuse set , T.P.M.O. switch , anticlimbing device and paintig of pole Complete with all material lab. T&P etc required for proper completion of work or as direction of E/I. (AR) 2022

Supply, Installation, Testing and commissioning of foiiowing size 11/0.433kv Aiuminium/copper wound distribution T/F Level-1or 2 Rating complete in all respect as per UPPCL approved makes and noms ( five star rating with 3 year warrenty after hand over ) (AR) 2023

400 Kva

Const. of T/F plinth size 1.5x1.5 & height over all 1.30 mt. made of 1st class B/W in 1:4 ( 1 cement & 4 coarese sand ) in foundation 100 PCC in 10:5:1 & top of the plinth 100 mm PCC in ratio 1:2:4 ( 1 cement 4 coarse sand & 4 stone ballast agreegate 4cm ) complete with 12mm Plaster all side and white Wash etc as per direction of E/I AR 2022

Const. of feeder pillar plinth size 1.50 x 0.58 mt & Height 0.45 mt with 1st class B/W in 1:4 in foundatio 100mm PCC ratio 10:5:1 and on top 100m PCC in ratio 1:2:4 ( 1 cement 4 coarse sand & 4 stone ballast agreegate 4cm ) including plaster & white wash etc all complete. AR 2022

Const. of fencing plinth clear inner size 4.5 x 7.0 x 0.45 mt. in 1st class B/W including plaster & providing M -150 Brick on edge floor laid dry joint sand filing including perpration base to proper slope..all complete in open space or as direction of E/I. AR 2022

Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of two no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respect.. SI No. 703 PWD SOR/18

Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 717/2018

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.(Rate analysis attached) SOR (823F - CAT B) ( make - L&T / siemens / havells / schenider ) Incoming 1000 Amp. MCCB-1 Nos. Outgoing

200 Amp.MCCB-5 Nos. & 100 Amp. 1 pole MCCB

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.PWD SOR 501/2018 ( make- gloster / havells / universal / polycab )

25 sq. mm 3.5 core (373-170=203)

50 sq. mm 3.5 core (492-170=322)

95 sq. mm 3.5 core (700-170=530)

120 sq. mm 3-1/2 core (824-170=654)

240 sq. mm 3-1/2 core (1379-170=1209)

Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.PWD SOR 504/2018

95sq. mm

240 sq. mm

120 sq. mm

50 sq. mm

25 sq. mm

S/F of danger Board complete with clamps, bolts & nut complete in all respect as per direction of SOR S.I 1109/18

Supplying and fixing of light class G.I. pipe of 100 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.DSR/12.39 /22 (4907-16.16%=4114.29)

Supply and Fixing of Tape off box 250 Amp to 400 Amp TPN for Sandwich alumininum bus bar trunking complete in all respect. PWD SOR 931/2018

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only.(Rate analysis attached) SOR No. 812 B + (1020 A +1019 x 4 CAT-B ) ( make - L&T / siemens / havells / schenider ) (125700+1720+1260.00 x 4 = 127440.00) Incoming 200 Amp. MCCB-1 Nos. Outgoing

63 Amp.MCCB-4 Nos. + 32 Amp. 4 core MCB 4 nos.

S&F of 320 Amp. four pole change over switch on 50mm x 50mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.PWD SOR 380/2018 ( make - L&T / siemens / havells )

Supply and erection of 63 Amp. TPN tap off box on rising mains complete with HRC fuses etc. complete in all respect. PWD SOR 913/2018 ( make - L&T / siemens / havells )

S&F of 63 Amp. 4 pole MCB(10 KA) C Curve. CAT A PWD SOR 1020A/2018 ( make - L&T / siemens / havells )

S & F surface/Flush mounting 4ways TPN distribution board with additional metal door without MCB complete in all respect,as directed at site by Engineer in charge. CAT A PWD SOR1026 C/2018 ( make - L&T / siemens / havells )

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. CAT A PWD SOR1002 /2018 ( make - L&T / siemens / havells )

Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion of work PWD SOR 1142/2018

Construction of 125 Kvaq disel genrator set foundation complete with all materials , labour tool & Plant etc. in all respect as per dircetion engineer incharge. AR 2022

Shifting of 125 kva DG set on foundation plinth by meen fo crain/ hydroulic liftor.( Rate taken from PWD sOR Civil 2017 Chaptor-2 SI No.-31 J.C.B. including POL & Driver)