Greater Noida Industrial Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Greater Noida Industrial Development Authority - GNIDA Tender
Civil And Construction
Pipe Line Project
Eprocure
Opening Date11 Mar 2025
Closing Date25 Mar 2025
Tender Amount₹ 2,47,42,260
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
The bid capacity required in the given tender is as follows: 1. Works more than 1.5 Times bid value: - 5% of the bid value for works upto Rs.15.00 Lacs - 10% of the bid value for works upto Rs.100.00 Lacs - 12% of the bid value for works upto Rs.500.00 Lacs - 2.00 Times bid value for works Rs.500.00 Lacs and above Formulas:
- Cumulative turnover will be considered for three consecutive years out of last four assessment years.
- Liquid assets: 5%, 10%, or 12% of the bid value, depending on the work value.
- The bid capacity is calculated based on the work value, with specific percentages and formulas applied to different work value ranges. For works with values:
- More than Rs.10.00 Lacs and upto Rs.15.00 Lacs: 1.5 Times bid value, with liquid assets of 5% of the bid value.
- More than Rs.15.00 Lacs and upto Rs.100.00 Lacs: 1.5 Times bid value, with liquid assets of 10% of the bid value.
- More than Rs.100.00 Lacs and upto Rs.500.00 Lacs: 1.5 Times bid value, with liquid assets of 12% of the bid value.
- More than Rs.500.00 Lacs: 2.00 Times bid value. Given the estimated cost of the work is Rs. 247.42 Lacs, the bid capacity required can be calculated using the provided formulas.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed works during the last 7 years. The experience requirements are as follows: - Three similar completed works costing not less than 40% of the estimated cost put to tender, - Two similar completed works costing not less than 60% of the estimated cost put to tender, - One similar completed work of aggregate cost not less than 80% of the estimated project cost put to tender. The required prior work experience for the bidder is related to the categories of works, which are as follows:
1. Works more than 1.5 Times bid value: - Diploma Engineer: 1, with a relaxation of 1 year in experience if the company is owned by a Diploma engineer, and 2 years if owned by a Graduate engineer.
2. Works more than 1.5 Times bid value (Rs.10.00 Lacs to Rs.15.00 Lacs): - No specific relaxation in work experience is mentioned for this category.
3. Works more than 1.5 Times bid value (Rs.15.00 Lacs to Rs.100.00 Lacs): - Graduate Engineer: 1, Diploma Engineer: 1, with no relaxation mentioned.
4. Works more than 1.5 Times bid value (Rs.100.00 Lacs to Rs.500.00 Lacs): - Graduate Engineer: 2, Diploma Engineer: 2, with no relaxation mentioned.
5. Works Rs.500.00 Lacs and above: - Graduate Engineer: 2, Diploma Engineer: 3, with no relaxation mentioned. The value and percentage of similar works completed are mentioned in the context of cumulative turnover, which is:
- 5% of the bid value for works up to Rs.15.00 Lacs
- 10% of the bid value for works between Rs.15.00 Lacs and Rs.100.00 Lacs
- 12% of the bid value for works between Rs.100.00 Lacs and Rs.500.00 Lacs
- 12% of the bid value for works of Rs.500.00 Lacs and above.
Costs
EMD
₹ 4,95,000Document Cost
₹ 4,250Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_GNIDA_1016130_9Tender No
SM/(E-TENDER CELL)/2025/580 DATED-07.03.2025Tender Authority
Greater Noida Industrial Development Authority ViewPurchaser Address
-Website
http://https://www.greaternoidaauthority.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and Laying, size of finolex makes PVC pipes 6kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to lenght and making joints i/c cost of socket, platochem PV-85 pvc solvent cement complete. PVC Pipe must be confirming to IS: 1985-2000 with latest amendment. make-Finolex industries Ltd. Supremeindustries Ltd (Rate as per comparative statement per Rm. N.S.I NO. 1.3.00)
-
-
-
... More
90mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 209.10-12% Less- 184.008
3300
186
616077
... More
110mm dia with coupler @6kgf/Cm2 pressure b with i/c all PVC standard Specials @ 298.2-12% Less-262.416
1800
266
479250
... More
140mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 492.9-12% Less 433.752
900
440
396081
... More
160mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 611.1-12% Less- 537.768
1800
545
982116
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber inserting etc. complete (the tail pieces, tapers etc. if required will be paid seperately) : (DSR-18/18.59.2)
-
-
-
... More
80 mm dia
24
5385
129240
... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329: 300 mm dia Ductile Iron Class K-7 pipes. Rate As Per NSI.
-
-
-
... More
200mm dia Ductile Iron Class K-7 Pipes @ 2978.60
45
2978
134037
... More
250 mm dia Ductile Iron Class K-7 pipes. @ 3922.85
45
3922
176528.25
... More
300 mm día Ductile Iron Class K-7 pipes. @ 5012.08
45
5012
225543.6
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately)
(Rate As Per NSI) Noida approved.
-
-
-
... More
150mm dia sluice valve (Kirlosker/IVC Make) @ 24073.60-12% Less-21184.77
30
21494
644828.4
... More
200mm dia sluice valve (Kirlosker/IVC Make) @ 42038.9-12% Less 36994.24
18
37534
675625.14
... More
250mm dia sluice valve (Kirlosker/IVC Make) @ 54867.2-12% Less-48283.14
9
48988
440897.13
... More
300mm dia sluice valve (Kirlosker/IVC Make) @ 78362.6-12% Less 68959.88
9
69966
629699.4
... More
Providing and laying M.S Specials such as tee, Bends, Collars, Tapers, gap, Pieces, including flange ends as required, painting, cutting welding as per site requirments of MS pipe Kg thickness etc complete in all respect as per direction of E/l @ 75.10-12% Less 66.09(Rate As Per NSI)
3000
67
201150
... More
Supply and Installation of required size steel pipe 10mm thick conforming to IS 3589 through trenchless excavation of thrust pit and reciving pit required size and the excavation & filling back & compaction complete as per specification for road crossing by Auger boring method. Pipe will be installed at depth beyond 3m below the ground surface in downward required slope. N.S.I
-
-
-
... More
200mm dia @ 8820-12% Less=7761.6
54
7875
425250
... More
Item No. 54: Analysis of Rates for laying of 90mm dia. DWC (Double wall corrugated) Pipe across the road by Trenchless method. (Manual) Rate As per GNIDA
-
-
-
... More
120mm dia Trenchless method With Pipe Rate 796/- and without Pipe Rate 550/- (Manual) Rate as per electrical (GNIDA)
750
550
412500
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1) cement: 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand 4graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement 5 fine sand: 10graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class 7.5. designation DSR-18/36.1
-
-
-
... More
With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5
60
6723
403392
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1) cement: 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: DSR-18/34.1
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
45
11504
517697.1
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.0m spacing this includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 15,20,25,32,40,50 mm nominal outer dia Pipes. Rate As Per (DSR- 2018)
-
-
-
... More
15 mm nominal outer dia pipes (DSR-18/18.7.1)
9000
146
1315710
... More
20 mm nominal outer dia pipes (DSR-18/18.7.2)
750
196
147502.5
... More
25 mm nominal outer dia pipes (DSR-18/18.7.3)
750
250
188047.5
... More
32 mm nominal outer dia pipes (DSR-18/18.7.4)
225
339
76335.75
... More
40 mm nominal outer dia pipes (DSR-18/18.7.5)
180
463
83489.4
... More
50 mm nominal outer dia pipes (DSR-18/18.7.6)
150
685
102766.5
... More
Providing and Fixing brass ferrule with C.I mouth cover including boring and tapping the main:-
-
-
-
... More
15 mm nominal bore (DSR-18/18.20.1)
3000
256
768690
... More
20 mm nominal bore (DSR-18/18.20.2)
150
295
44319
... More
25 mm nominal bore (DSR-18/18.20.3)
150
380
57084
... More
Providing and Fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (new work).
-
-
-
... More
15 mm nominal bore(DSR-18/18.46.1)
3000
128
385530
... More
20 mm nominal bore (DSR-18/18.46.2)
150
150
22587
... More
25 mm nominal bore (DSR-18/18.46.3)
150
219
32866.5
... More
Cutting existing PVC Water main pipe line following nominal dia inserting special and fitting bailing or pumping out water cartage of required materials returning the scrap to site store etc. complete including the cost of insertion pipe ( upto 1.00m) special also including making joint for repair of leakage and baring out the existing main benders as well as subsequent and all type of labour T&P etc. complete for proper completion of work after repairing the leakage the site should be neatly dressed.(AR/GNIDA)
-
-
-
... More
90 mm dia.
4500
1052
4735665
... More
110 mm dia
1800
1105
1990638
... More
160 mm dia
900
1394
1254870
... More
Cutting existing leakage 150mm to 500mm dia S&S or flanged C.I running Water main specials or fitting baliling or pumping out water cartage of required materials the scrap to site store etc. complete including the inserction pipe and special also i/c making joint for repair of leakage and baring out the existing main bends as well as subsequent back fill including testing and all type of labour T&P etc. complete after repairing the leakage the site should be neatly dressed C.I pipe and specials paid in separately item (AR/GNIDA)
-
-
-
... More
150 mm dia
180
2506
451162.8
... More
200 mm dia
180
2882
518783.4
... More
250 mm dia
180
3955
711909
... More
300 mm dia
165
5402
891433.95
... More
400 mm dia
75
9151
686348.25
... More
500 mm dia
30
16304
489120.3
... More
Repairing of C.I. Sluice valve with Joint, Nut bolts, packing, change of gun metal sleeves, change of spindle and cartage T&P etc. complete as per respect & direction of Engineer-in charge. AR/GNIDA.
-
-
-
... More
150 mm dia
54
2692
145411.2
... More
200 mm dia
18
3292
59271.48
... More
250 mm dia
36
6139
221037.84
... More
300 mm dia
18
7573
136323
... More
400 mm dia
15
16514
247716.45
... More
450 mm dia
15
19670
295050.9
... More
500 mm dia
6
20932
125593.86
... More
600 mm dia
6
30883
185298.3
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in-charge.DSR-18/15.2.1
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
144
923
132972.48
... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR-18/15.2.2
96
569
54648
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-IN-Charge DSR-18/15.3
144
1347
193991.04
... More
Labour Cess and GST will be paid extra as per govt. orders
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%