Greater Noida Industrial Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Greater Noida Industrial Development Authority - GNIDA Tender
Eprocure
Opening Date25 Aug 2020
Closing DateCancelled
Tender Amount₹ 6,47,60,943
Costs
EMD
₹ 12,96,000Document Cost
₹ 6,770Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_GNIDA_504830_5Tender No
GM/PROJECT-II/2020/143 DATED 17.08.2020Tender Authority
Greater Noida Industrial Development Authority ViewPurchaser Address
-Website
http://https://www.greaternoidaauthority.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing:
-
-
-
... More
50 mm nominal outer dia Pipes (DSR-13/18.7.6/P-319)
215
-
569.2
... More
Suspended floors, roofs, landings, balconies and access platform. (DSR-13/5.9.3/P-97)
380.1
-
371.8
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
2.91
-
3920.65
... More
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.)/Spring core (2.5mm thick) wire of high tensile strength of 165kg/sqmm. with tape (0.52 mm thick) and weight 43.478gm/metre (cost of M.S. angle, C.C. blocks shall be paid separately). (DSR-13/16.53/P-270)
655.9
-
284.1
... More
(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.
-
-
-
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (DSR-13/4.1.3/P-85)
16.18
-
4921.7
... More
4.0mm thick glass panes (DSR-13/10.30.1/P-180)
45.09
-
727.7
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level, excluding cost of centring, shuttering, finishing and reinforcement: (Cast-in-Situ)
-
-
-
... More
12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) (DSR-13/13.4.2/P-222)
1755.76
-
142.25
... More
Depth from 0.0 to 1.5 M below G.L.
65.63
-
109.26
... More
0.91m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal dia meter conforming to IS 12592, total weight of cover and frame not less than 182 Kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centring, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately):
-
-
-
... More
Columns, pillars, piers, abutments, posts and struts. (DSR-13/5.9.6/P-97)
1082.16
-
423
... More
15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:
-
-
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
... More
Part-A - Cow Shed
-
-
-
... More
15 mm nominal outer dia Pipes (DSR-13/18.7.1/P-319)
45
-
155.8
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.1.2/P-111)
261.24
-
4646.5
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR-13/13.41.1/P-225)
832.65
-
79.65
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). (DSR-13/5.1.2/P-96)
17.81
-
5552.25
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
49046.53
-
66.5
... More
Circular Type: 125 mm nominal dia with 25 mm waste hole (DSR-13/18.58.1.2/P-328-329)
11
-
57
... More
Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR-13/12.22/P-206)
15
-
167.45
... More
Boring/drilling bore well of required dia for casing/stainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore leg, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil
-
-
-
... More
Lead upto 50M and lift upto 1.50M
21926.4
-
71.09
... More
1:4 (1 cement : 4 fine sand) (DSR-13/13.8.2/P-222)
25.2
-
203.65
... More
20 mm nominal outer dia Pipes (DSR-13/18.7.2/P-319)
50
-
182.15
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
59.07
-
54.03
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
1131.9
-
186.4
... More
400 mm dia NP-3 pipe
48.5
-
1036.07
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
135.2
-
186.4
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
45 cm length: 15 mm nominal bore (DSR-13/18.21.2.1/P-322)
9
-
67.35
... More
15mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement : 4 fine sand) (DSR-13/13.2.1/P-222)
538.88
-
168.55
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.1.2/P-111)
203.46
-
4646.5
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
358.57
-
54.03
... More
Finishing walls with Acrylic smooth exterior paint of required shade: New work (two or more coat applied @ 1.67 Ltr./10 Sqm over and including priming coat of exterior primer applied @ 2.20Kg/10Sqm.) (DSR-13/13.46.1/P-225)
538.88
-
78.1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work - Exposed on wall:
-
-
-
... More
L D 2.5: Rectangular shape 600x450 mm internal dimensions (DSR-13/19.19.1.1/P-354)
7
-
1108.05
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. (DSR-13/4.17/P-88)
158.08
-
378.95
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
520.95
-
3920.65
... More
Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (DSR-13/11.37/P-191)
18
-
822.1
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
46062.64
-
66.5
... More
Providing and fixing PTMT bib cock of approved quality and colour.
-
-
-
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
400.35
-
66.5
... More
Part-D - Staff rooms
-
-
-
... More
White vitreous China wash basin size 630x450 mm with a single 15mm C.P. brass pillar taps. (DSR-13/17.7.2/P-288)
4
-
1903.25
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Along external wall where the apron is not provided using chemical emulsion @ 7.5 Litre/Sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete.
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. (DSR-13/2.35.1.1/P-76)
159.02
-
14.05
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level, excluding cost of centring, shuttering, finishing and reinforcement: (Cast-in-Situ)
-
-
-
... More
150mm nominal size dia (DSR-13/24.3.2/P-396)
40
-
586.65
... More
With bricks of class designation-150 (DSR-13/19.9.1.1/P-352)
9
-
8241.55
... More
Kitchen sink without drain board. 610x460 mm bowl depth 200 mm (DSR-13/17.10.2.2/P-289)
4
-
3936.55
... More
Add or deduct for plaster drip course/groove in plastered surface or moulding to R.C.C. projections. (DSR-13/5.30/P-100)
57.92
-
27.85
... More
250mm dia NP-2 concrete cradle
100
-
266.5
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Providing and fixing unplasticised PVC connection pipe with brass unions:
-
-
-
... More
Fixed to steel windows by welding. (DSR-13/9.48.1/P-154)
534.23
-
103.15
... More
Columns, pillars, piers, abutments, posts and struts. (DSR-13/5.9.6/P-97)
169.86
-
423
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-2 pipe of following diameter including centring shuttering but excluding excavation. (AR/GNIDA)
-
-
-
... More
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
-
-
-
... More
(d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep.
-
-
-
... More
400 mm dia NP-3 pipe
48.5
-
185.77
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Providing and placing on terrace (at all floor levels) polythylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR-13/18.48/P-327)
3000
-
6.3
... More
150x10mm (DSR-13/9.63.3/P-156)
15
-
43.4
... More
Depth from 0.0 to 1.5 M below G.L.
597.62
-
109.26
... More
Supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR-13/24.5/P-397)
9.8
-
494.75
... More
150 mm dia NP-2 pipe
26
-
62.09
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
3135.04
-
85.4
... More
Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR-13/6.13.2/P-112)
324
-
647.9
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
15mm nominal bore, 122 mm long, weighing not less than 99 gms. (DSR-13/18.54.2/P-328)
4
-
178.55
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
12mm cement plaster finished with a floating coat of neat cement of mix:
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:
-
-
-
... More
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
539.26
-
54.03
... More
250 mm dia NP-2 pipe
100
-
82.38
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:
-
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
28.51
-
54.03
... More
Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR-13/6.13.2/P-112)
14.92
-
647.9
... More
Providing and fixing ISI marked oxidised M.S. handles conforming to IS: 4992 with necessary screws etc. complete:
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50mm, including reinforcement with 6mm dia M.S. bars 4 nos on each side, including setting in position in footpath to the required level and line over a bed of 20mm average thick cement mortar 1:5 (1 cement : 5 coarse sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-charge. (DSR-13/16.67/P-274)
1497.1
-
561.5
... More
25 mm nominal bore (DSR-13/18.18.3/P-321)
4
-
446.95
... More
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
Finishing walls with Acrylic smooth exterior paint of required shade: New work (two or more coat applied @ 1.67 Ltr./10 Sqm over and including priming coat of exterior primer applied @ 2.20Kg/10Sqm.) (DSR-13/13.46.1/P-225)
2208.06
-
78.1
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
15mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix:
-
-
-
... More
Supplying, filling, spreading & levelling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR-13/24.6/P-397)
8
-
901.25
... More
Suspended floors, roofs, landings, balconies and access platform. (DSR-13/5.9.3/P-97)
25.6
-
371.8
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Carriage/disposal of earth/material by mechanical transport including loading, unloading and stacking. (AR/GNIDA). Earth:
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
676.2
-
3920.65
... More
Part-B - Development work
-
-
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. (DSR-13/4.12/P-87)
4.23
-
44.36
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level, excluding cost of centring, shuttering, finishing and reinforcement: (Cast-in-Situ)
-
-
-
... More
All leads
21926.4
-
75.4
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) (DSR-13/4.10/P-87)
247.87
-
220.6
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-13/11.36/P-191)
70.87
-
793.6
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). (DSR-13/5.1.2/P-96)
351.39
-
5552.25
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
150 mm dia NP-2 pipe
26
-
185.45
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Providing and fixing PTMT angle stop cock 15mm nominal bore, weighing not less than 85 gms. (DSR-13/18.63/P-329)
14
-
166.9
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
2208.06
-
85.4
... More
White washing with lime to give an even shade: New work (three or more coats) (DSR-13/13.37.1/P-225)
817.7
-
14.35
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) (DSR-13/4.10/P-87)
162.7
-
220.6
... More
250 mm dia NP-2 pipe
100
-
258.47
... More
Drain work, RWH and UG Water Tank
-
-
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
... More
350mm dia (DSR-13/24.1.1.2/P-396)
60
-
435.6
... More
Brick work with bricks of class designation 150 in superstructure above plinth level upto floor V level in all shapes and sizes in:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
3.41
-
186.4
... More
40mm thick with 20mm nominal size stone aggregate (DSR-13/11.3.1/P-186)
120
-
316.8
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR-13/4.1.2/P-85)
360
-
5317.75
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:
-
-
-
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depression as per MORTH. (A.R./GNIDA) All kinds of soil.
-
-
-
... More
12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) (DSR-13/13.4.2/P-222)
456.15
-
142.25
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers. (DSR-13/5.9.5/P-97)
367.33
-
309.8
... More
32 mm nominal bore (DSR-13/18.17.2/P-321)
6
-
500.35
... More
Hot finished welded type tubes (DSR-13/10.16.1/P-179)
119311.24
-
95.85
... More
Twin rubber stopper (DSR-13/9.101.2/P-160)
15
-
80.2
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
3767.99
-
66.5
... More
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade ‘A’ sealing compound. (DSR-13/16.46.1/P-269)
30810
-
1.9
... More
Supply of ISI marked RCC S&S NP-3 pipes of following size including carting, loading, unloading at godown including all taxes and levies & rubber rings. (AR/GNIDA)
-
-
-
... More
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:
-
-
-
... More
Brick work with bricks of class designation 150 in superstructure above plinth level upto floor V level in all shapes and sizes in:
-
-
-
... More
6mm cement plaster of mix: 1:3 (1 cement : 3 fine sand) (DSR-13/13.16.1/P-223)
376.5
-
120.35
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg. per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. (DSR-13/4.13/P-87)
162.7
-
108.75
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
Part-C - Boundary wall
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) (DSR-13/5.2.2/P-96)
74.77
-
6319.2
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. (DSR-13/13.61.1/P-227)
160.7
-
63.05
... More
Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar, including filling joints with Jamuna sand, with M-150 bricks. (DSR-13/11.2/P-186)
5659.5
-
508.4
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.1.2/P-111)
335.43
-
4646.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
368.64
-
186.4
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) (DSR-13/5.2.2/P-96)
49.64
-
6319.2
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Applying priming coat : With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). (DSR-13/13.50.1/P-226)
70.52
-
30.75
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). (DSR-13/5.1.2/P-96)
201.66
-
5552.25
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
50 mm nominal bore (DSR-13/18.17.4/P-321)
9
-
749.4
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
117.47
-
54.03
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.4.2/P-111)
256.62
-
5325.1
... More
Size of tile 600x600mm (DSR-13/11.46.2/P-192)
132.79
-
1411.45
... More
25 mm nominal outer dia Pipes (DSR-13/18.7.3/P-319)
100
-
222.9
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L books, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
898.77
-
109.26
... More
Suspended floors, roofs, landings, balconies and access platform. (DSR-13/5.9.3/P-97)
12
-
371.8
... More
Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality and colour.
-
-
-
... More
Finishing walls with Acrylic smooth exterior paint of required shade: New work (two or more coat applied @ 1.67 Ltr./10 Sqm over and including priming coat of exterior primer applied @ 2.20Kg/10Sqm.) (DSR-13/13.46.1/P-225)
3135.04
-
78.1
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers. (DSR-13/5.9.5/P-97)
293.88
-
309.8
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Providing and fixing Stainless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
... More
32 mm nominal outer dia Pipes (DSR-13/18.7.4/P-319)
200
-
287.1
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). (DSR-13/5.1.2/P-96)
45.39
-
5552.25
... More
125 mm (DSR-13/9.66.1/P-156)
30
-
27.2
... More
25 mm nominal bore (DSR-13/18.17.1/P-321)
4
-
427.8
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
63.57
-
3920.65
... More
Half brick masonry with bricks of class designation 150 in superstructure above plinth level upto floor V level.
-
-
-
... More
With average thickness of 120mm and minimum thickness at khurra as 65mm. (DSR-13/22.7.1/P-380-381)
278.98
-
882.6
... More
250x16 mm (DSR-13/9.62.2/P-156)
15
-
154.6
... More
Flexible pipe: 32mm dia. (DSR-13/17.28.2.1/P-291)
8
-
72.55
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
15mm cement plaster on the rough side of single or half brick wall of mix: 1:6 (1 cement : 6 fine sand) (DSR-13/13.2.2/P-222)
1469.34
-
154.7
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
10901.29
-
66.5
... More
110mm diameter (DSR-13/12.41.2/P-209)
130
-
218.6
... More
Brick work with bricks of class designation 150 in superstructure above plinth level upto floor V level in all shapes and sizes in:
-
-
-
... More
Providing and fixing circular/hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3mm dia round headed screws, one lock at the corners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing. (DSR-13/10.18/P-179)
9
-
138
... More
Depth from 0.0 to 1.5 M below G.L.
38.01
-
109.26
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
1371.53
-
85.4
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) (DSR-13/5.2.2/P-96)
91.33
-
6319.2
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
78.47
-
3920.65
... More
20 mm nominal bore (DSR-13/18.16.2/P-321)
54
-
343.95
... More
Weather shade, chajjas, corbels etc. including edges. (DSR-13/5.9.19/P-97)
4.32
-
468.2
... More
1.00mm thick with zinc coating not less than 275gm/Sqm (DSR-13/12.1.1/P-204)
4649.84
-
957.7
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion.
-
-
-
... More
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. (DSR-13/2.27/P-75)
56.75
-
843.65
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Columns, pillars, piers, abutments, posts and struts. (DSR-13/5.9.6/P-97)
581.04
-
423
... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m: With bricks of class designation-150 (DSR-13/19.10.1/P-352)
1.25
-
4698.4
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.1.2/P-111)
27.81
-
4646.5
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.4.2/P-111)
106.73
-
5325.1
... More
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19mm beading of second class teak wood and priming coat with approved steel primer all complete. (DSR-13/9.50/P-154)
18.84
-
1075.2
... More
25 mm nominal outer dia Pipes (DSR-13/18.7.3/P-319)
540
-
222.9
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work - Exposed on wall:
-
-
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers. (DSR-13/5.9.5/P-97)
402.72
-
309.8
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end):
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) (DSR-13/13.4.2/P-222)
646.61
-
142.25
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side/top/centre hung, with beading and all members such as F7D, F4B, K11B and K12B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
-
-
-
... More
250x10 mm (DSR-13/9.63.1/P-156)
15
-
63.55
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). (DSR-13/5.1.2/P-96)
1131.9
-
5552.25
... More
Supply of ISI marked RCC S&S NP-2 pipes of following size including carting, loading, unloading at godown including all taxes and levies & rubber rings. (AR/GNIDA)
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part-I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
Add or deduct for plaster drip course/groove in plastered surface or moulding to R.C.C. projections. (DSR-13/5.30/P-100)
869.7
-
27.85
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%. (DSR-13/2.34.1/P-76)
357.8
-
185.95
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
41.93
-
3920.65
... More
1:4 (1 cement : 4 fine sand) (DSR-13/13.7.2/P-222)
810
-
180.6
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement : 6 coarse sand) (DSR-13/13.5.2/P-222)
1379.28
-
164.75
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:
-
-
-
... More
Fixing with 15x3mm lugs 10cm long embedded in cement concrete block 15x10x10cm of C.C. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (DSR-13/10.13.1/P-178)
230.54
-
81.95
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). (DSR-13/5.1.2/P-96)
2.55
-
5552.25
... More
25 mm nominal bore (DSR-13/18.17.1/P-321)
18
-
427.8
... More
Single tee without door: 110x110x110 mm (DSR-13/12.42.4.2/P-209)
25
-
244.95
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (DSR-13/24.8/P-397)
4.81
-
976.6
... More
Half brick masonry with bricks of class designation 150 in superstructure above plinth level upto floor V level.
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Extra for providing and placing in position 2 nos 6mm dia M.S. bars at every third course of half brick masonry (with M-150 bricks). (DSR-13/6.15/P-112)
324
-
69.5
... More
Providing and fixing PTMT swivelling shower, 15mm nominal bore, weighing not less than 40 gms. (DSR-13/18.64/P-330)
270
-
114.4
... More
Brick edging 7cm wide 11.4 cm deep to plinth protection with bricks of class designation 150 including grouting with cement mortar 1:4 (1 cement : 4 fine sand) (DSR-13/6.44/P-114)
117.14
-
38.55
... More
1:4 (1 cement : 4 fine sand) (DSR-13/13.8.2/P-222)
48
-
203.65
... More
Diluting and injecting chemical emulsion for POST-Constructional anti- termite treatment (excluding the cost of chemical emulsion):
-
-
-
... More
Edges of slabs and breaks in floors and walls. : Under 20 cms wide. (DSR-13/5.9.16.1/P-97)
102.55
-
111.7
... More
Extra for providing and placing in position 2 nos 6mm dia M.S. bars at every third course of half brick masonry (with M-150 bricks). (DSR-13/6.15/P-112)
14.92
-
69.5
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
(a) Applying a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
-
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
Providing & fixing in cement mortar 1:6 (1 cement : 6 fine sand) red sand stone slabs 30mm thick over Drain (A.R.GNIDA)
448
-
173.9
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Laying of NP-3 RCC S&S pipes jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 coarse sand) including testing of joints etc. complete. (AR/GNIDA)
-
-
-
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. (DSR-13/5.9.15/P-97)
12.8
-
186.4
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm sizes respectively. (DSR-13/17.23/P-290)
5
-
857.55
... More
Providing and fixing brass stop cock of approved quality:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.4.2/P-111)
307.52
-
5325.1
... More
Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms. (DSR-13/17.69.1/P-297)
5
-
99.3
... More
Depth from 0.0 to 1.5 M below G.L.
195.78
-
109.26
... More
35mm thick including ISI marked stainless steel butt hinges with necessary screws. (DSR-13/9.21.1/P-150-151)
28.67
-
1684.75
... More
50 mm nominal bore: Vertical (DSR-13/18.19.4.2/P-321)
2
-
1207.8
... More
Providing and laying 60mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (A.R.)
150
-
801
... More
Development of tube well in accordance with IS: 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (DSR-13/24.12/P-398)
16
-
614.75
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. (DSR-13/13.61.1/P-227)
69.6
-
63.05
... More
Edges of slabs and breaks in floors and walls. : Under 20 cms wide. (DSR-13/5.9.16.1/P-97)
1342.4
-
111.7
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR-13/10.25.2/P-180)
2496
-
86.5
... More
Add labour cess @ 1% on all above items
64119745.69
-
0.01
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
One or more coats on old work. (DSR-13/14.54.1/P-242)
9016
-
41.35
... More
150mm nominal size dia (DSR-13/24.4.2/P-396-397)
20
-
528.6
... More
Fixing with 15x3mm lugs 10cm long embedded in cement concrete block 15x10x10cm of C.C. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (DSR-13/10.11.1/P-178)
1500
-
105.1
... More
Supplying, filling, spreading & levelling coarse sand of size range 1.5mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR-13/24.7/P-397)
8
-
843.2
... More
15 mm nominal outer dia pipes (DSR-13/18.8.1/P-319)
60
-
254.95
... More
Laying of NP-2 RCC S&S pipes jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 coarse sand) including testing of joints etc. complete. (AR/GNIDA)
-
-
-
... More
12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) (DSR-13/13.4.2/P-222)
1556.42
-
142.25
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
52.8
-
186.4
... More
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete.
-
-
-
... More
75mm diameter (DSR-13/12.41.1/P-209)
35
-
134.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Circular shape 450mm dia (DSR-13/17.32.1/P-291)
4
-
856.65
... More
Providing and fixing water closet squatting pan (Indian type W.C. Pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
... More
White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. (DSR-13/17.1.1/P-287)
4
-
3265.25
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.1.2/P-111)
18.59
-
4646.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements