Greater Noida Industrial Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Greater Noida Industrial Development Authority - GNIDA Tender
Other Consultancy Services
Consultancy Services
Eprocure
Opening Date24 Jan 2024
Closing Date7 Feb 2024
Tender Amount₹ 3,60,89,226
Costs
EMD
₹ 7,22,000Document Cost
₹ 5,380Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GNIDA_884169_12Bid Award Id
ViewTender No
SM/(E-TENDER CELL)/2024/491 DATE-17.01.2024Tender Authority
Greater Noida Industrial Development Authority ViewPurchaser Address
-Website
http://https://www.greaternoidaauthority.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 16.83/DSR-18/SOR
600
29994
49.99
Re-laying of 80mm/60mm Thick Cement Concrete interlocking paver block , laid in required coloured & pattern over and including averege 50mm Thick Compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge GNIDA A.R.
60
11952
199.2
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). (DSR-18/15.2.2/SOR)
60
34155
569.25
Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material
-
-
-
within 50 metres lead : (DSR-18/15.24/AR)
69
34497
499.97
Cartage of earth or fly ash when added to schedule item no. 253. (SOR-251a)
-
-
-
Lead upto 2.0 Km. SOR-261
149.6
6732
45
PART B:- SEWER WORK
-
-
-
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :
-
-
-
Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35 19.26.4/DSR-18/SOR
30
7283
242.78
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.
-
-
-
EHD - 35: Circular shape 560 mm internal dia. (DSR-18/19.19.4.1/sor)
18
29654
1647.48
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only.
-
-
-
0.00 TO 1.50 M (SOR-251a)
205.7
19541
95
Supply of ISI marked RCC S&S NP-3 pipes of following size including carting, loading, unloading at godown including all taxes and levies & rubber rings. (SOR/DSR-2018)
-
-
-
250 mm dia NP-3 pipe
185.44
61753
333.01
Laying of NP-3 RCC S&S pipes jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 coarse sand) including testing of joints etc. complete. (SOR/DSR-2018)
-
-
-
250 mm dia NP-3 pipe
185.44
26747
144.24
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-3 pipe of following diameter including centring shuttering but excluding excavation. (SOR/AR/GNIDA)
-
-
-
250mm dia NP-3 concrete cradle
185.44
62165
335.23
Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:
-
-
-
0.91m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal dia meter conforming to IS 12592, total weight of cover and frame not less than 182 Kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centring, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately): (SOR/DSR-2018)
-
-
-
With bricks of class designation-150 (DSR-18/19.9.1.1/SOR)
16
152628
9539.27
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m 19.10.1 With common burnt clay F.P.S. (non modular) bricks of class designation 150 (DSR-18/19.10.1/SOR)
0.6
2934
4890.07
Supply of ISI marked RCC S&S NP-2 pipes of following size including carting, loading, unloading at godown including all taxes and levies & rubber rings. (SOR/DSR-2018)
-
-
-
150 mm dia NP-2 pipe
60
12517
208.63
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-2 pipe of following diameter including centring shuttering but excluding excavation. (SOR/AR/GNIDA)
-
-
-
150 mm dia NP-2 pipe
60
14250
237.5
Laying of NP-2 RCC S&S pipes jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 coarse sand) including testing of joints etc. complete. (SOR/DSR-2018)
-
-
-
150 mm dia NP-2 pipe
60
4549
75.83
PART- C Water Supply
-
-
-
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only.
-
-
-
0.00 TO 1.50 M (SOR-251a)
108
10260
95
Providing and fixing uPVC Pipe (6.0 Kg. per Sqcm pressure) Kisan/Supreme Quality or Equivalent) including all uPVC fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
90MM DIA, SOR/AR
200
60008
300.04
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work
-
-
-
15 mm nominal outer dia. Pipes. (DSR-18/18.9.1)AR
45
6079
135.1
Providing and fixing brass ferul with C.I. mouth Cover including boring and taping the main
-
-
-
15 mm dia nominal bore (DSR-18/18.20.1)AR
15
3843
256.23
PART-D -Drain Work
-
-
-
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only.
(SOR-251a)
758.5
72057
95
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-281)
183.7
1069134
5820
Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & manual placing .
MORTH-9.06 E/Case-II
606.5
4878667
8043.97
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. AR- (Sail Steel)
52371.27
4838057
92.38
M-150 Brick Work in 1:4 cement & Coarse sand 2.2 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-305a
68.96
341352
4950
Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
SOR-279a
12.99
90930
7000
12 mm cement plaster of mix:
-
-
-
1:6 (1 cement: 6 coarse sand) DSR-13/13.4.2/AR
869.7
143335
164.81
PART-E Road Work
-
-
-
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2, Lead up to 2KM, MORTH-305.
369
75718
205.2
Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar including filing joints with jamuna sand (with M-150 bricks) complete.DSR-18/11.2/AR
1230
702760
571.35
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-281)
123
715860
5820
Plain cement concrete in open foundation complete as per drawing and technical specifications. PCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. 15.11/D/Case-II)
1014.6
8068007
7951.91
Providing and laying in position bitumen hot sealing compound for expansion joints etc..DSR-18/16.46.1/AR
792
1655
2.09
Providing and laying I Shaped Interlocking tiles Rubber moulded 80mm thick Precast cement concerete having plan dimension 200x(160+120mm) with compressive strength not be less than 40Mpa (M-40) and weight 5kg, laid in required pattern over and including averege 50mm Thick Compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge with conforming to ISI - 15658-2006 SOR/ A.R. Grey Colour.
413.1
401367
971.6
Part-F Rennovation of Baratghar
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR-18/15.56/AR
319.91
6548
20.47
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar DSR-18/15.7.4/AR
0.53
413
779.76
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (including equivalent design mix). (DSR-18/15.2.1/SOR)
5.38
4968
923.42
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 16.83/DSR-18/SOR
352
17596
49.99
Re-laying of 80mm/60mm Thick Cement Concrete interlocking paver block , laid in required coloured & pattern over and including averege 50mm Thick Compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge GNIDA A.R.
176
35059
199.2
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only.
-
-
-
0.00 TO 1.50 M (SOR-251a)
4.08
387
95
Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar including filing joints with jamuna sand (with M-150 bricks) complete.DSR-18/11.2/AR
202.68
115801
571.35
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
62.37
362993
5820
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in foundation including necessary Cutting & molding of brick as required. for walls of one brick thick. including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR-310
2.56
12672
4950
2.5 cm thick and of cement concrete consisting of 1 part cement, 1½ parts approved coarse sand and 3 parts approved 10 mm. graded stone grit and including water proofing material as ordered by the Engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. (SOR-361)
3.8
1254
330
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure including necessary Cutting & moulding of brick as required. for walls of one brick thick. including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-310
24.64
136505
5540
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-18/13.5.2/AR
107.15
20503
191.35
12mm cement plaster of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-13/13.4.2/P-222
331.34
54608
164.81
Cast cement concret door sills chaukhets boundary posts shelves and similar small work with cement approved coarse sand and 2cm gauge stone grit in proportion of 1:2:4: excludingi its fixing and binding the same with 24 B.W. G.G.I binding moulds all materials labour, tool &plants etc. required for proper competion of the work the rate excludes making of drip course which shall be paid extra SOR -282
12.69
88830
7000
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : Ggraded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. DSR-18/4.17/AR
55.86
29486
527.87
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)
-
-
-
25 mm thick.DSR-18/11.26/AR
56.34
74246
1317.88
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
-
-
-
20mm thick.DSR-18/11.27/AR
8.77
12122
1381.7
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-18/11.36/SOR)
8.82
9412
1067.22
Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (DSR-18/11.37/SOR)
4.37
5116
1170.79
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.
-
-
-
Same as item 660 but for weather coat.(Asian or Berger Brand) SOR-660-New Item
1078.82
90620
84
Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.As in item (649) above but for every coat after the first coat. (SOR-650)
678.64
46826
69
Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. (SOR)
1757.46
110719
63
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-18/13.50.3/SOR)
165.77
5312
32.05
Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. As in item (641) above but for every coat after first coat. SOR-642
126.17
10598
84
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:
-
-
-
(a) Applying a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
-
-
-
(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.
-
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
-
-
-
(d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep.
-
-
-
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
-
-
-
With average thickness of 120mm and minimum thickness at khurra as 65mm. (DSR-18/22.7.1/SOR)
232.79
238516
1024.6
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR-18/18.48/AR
3000
22920
7.64
Providing and fixing white vitreous china pedestal type water closet (Indian type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid. (DSR-18/17.1.1/SOR)
4
14833
3708.25
Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. DSR-18/17.7.1/AR
6
13418
2236.44
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. (DSR-18/17.4.2/SOR)
4
19645
4911.41
Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122mm long, weighing not less than 99 gms DSR-18/ 18.54.2/AR
18
2532
140.68
Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms DSR-18/ 18.54.1/AR
18
1821
101.19
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe 32 mm dia DSR-18/17.28.1.1/AR
15
1142
76.15
Providing and fixing uPVC Pipe (6.0 Kg. per Sqcm pressure) Kisan/Supreme Quality or Equivalent) includes jointing of pipes & fittings with one step uPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
Single socket pipes 110mm diametre. (DSR-18/12.41.2/SOR)
60
17161
286.02
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular Type: 100 mm nominal dia. (DSR-18/18.58.1.1/SOR)
10
328
32.89
150 mm nominal size square 100 mm diameter of the inner hinged round grating. (DSR-18/18.58.2.1/SOR)
5
733
146.72
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
25 mm nominal bore (DSR-18/18.17.1/SOR)
3
1294
431.6
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:
-
-
-
25 mm nominal bore (DSR-18/18.18.3/SOR)
2
684
342.03
Providing and fixing unplasticised PVC connection pipe with brass unions:
-
-
-
45 cm length: 15 mm nominal bore (DSR-18/18.21.2.1/SOR)
15
1080
72.06
Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. : (DSR-18/18.63/SOR)
15
2023
134.87
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work - Exposed on wall:
-
-
-
15 mm nominal outer dia Pipes (DSR-18/18.7.1/SOR)
35
5116
146.19
20 mm nominal outer dia Pipes (DSR-18/18.7.2/SOR)
15
2950
196.67
25 mm nominal outer dia Pipes (DSR-18/18.7.3/SOR)
20
5014
250.73
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia Pipes (DSR-18/18.8.1/SOR)
15
3772
251.53
20 mm nominal outer dia Pipes (DSR-18/18.8.2/SOR)
15
4664
310.99
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge. External work:
-
-
-
25mm nominal outer dia pipes (DSR-18/18.9.3/SOR)
20
4771
238.55
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (Sail Steel)
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.DSR-18/10.25.2/AR
3038
268893
88.51
Providing and laying 60mm Thick ISI mark factory made Cement Concrete interlocking paver block made by block making machine with strong vibratroy compaction of approved size, design, shape, laid in required coloured of M-35 & pattern over and including averege 50mm Thick Compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge with conforming to ISI - 15658 & IRC : SP : 63 A.R.(GINIDA)
554.68
414900
748
Part-G Renovation of Composite School
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.DSR-18/15.56/AR
1552.01
31769
20.47
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. (DSR-18/15.7.4/SOR)
3.53
2752
779.76
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2, Lead up to 2KM, MORTH-305.
649.5
133277
205.2
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only.
-
-
-
0.00 TO 1.50 M (SOR-251a)
5.4
513
95
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
170.35
991437
5820
Plain cement concrete in open foundation complete as per drawing and technical specifications. PCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. 15.11/D/Case-II)
66
524826
7951.91
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in foundation including necessary Cutting & molding of brick as required. for walls of one brick thick. including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR-310
8.28
40986
4950
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure including necessary Cutting & molding of brick as required. for walls of one brick thick. including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR-310
13.64
75565
5540
2.5 cm thick and of cement concrete consisting of 1 part cement, 1½ parts approved coarse sand and 3 parts approved 10 mm. graded stone grit and including water proofing material as ordered by the Engineer in charge in the proportion as specified by the manufacturer including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. (SOR-361)
90.97
32749
360
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-18/13.5.2/AR
917.77
175615
191.35
12mm cement plaster of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-13/13.4.2/P-222
445.56
73432
164.81
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : Graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. DSR-18/4.17/AR
47.4
25021
527.87
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using M.S. angels 40x40x6 mm for diagonal braces (DSR-18/10.5.1/SOR)
8.19
23774
2902.85
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.
-
-
-
9.48.1 Fixed to steel windows by welding
220
29887
135.85
Steel work welded in built up sections/framed work including cutting, hoisting, fixing inposition and applying a priming coat of approved steel primer using structural steel etc. as required. (Sail Steel)
-
-
-
In gratings,frames,guard bar, ladder, raillings, brackets,DSR-18/10.25.2 AR
250
22127
88.51
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. 10.30.1/DSR-18/SOR
22.8
19673
862.88
Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1 cement : 4 coarse sand) with 12 mm diameter anchoring steel bar, 45 cm long, fixed in each stone and supported on and including with bricks cove in cement mortar 1:4 (1 cement : 4 coarse sand), including pointing in cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade :
-
-
-
Red sand stone : With common burnt clay F.P.S.(non modular) bricks of class Designation 150 DSR-18/7.28.1.1/sor
14.4
19587
1360.24
Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. (SOR)
1463.33
92189
63
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.
-
-
-
Same as item 660 but for weather coat.(Asian or Berger Brand) SOR-660-New Item
1463.33
122919
84
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works. (DSR-18/13.50.3/SOR)
30
961
32.05
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:
-
-
-
(a) Applying a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
-
-
-
(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.
-
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
-
-
-
(d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep.
-
-
-
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
-
-
-
With average thickness of 120mm and minimum thickness at khurra as 65mm. (DSR-18/22.7.1/SOR)
1197
1226446
1024.6
Making Khurra 45 cms x 45 cms with c.c. 1 : 2 : 4 average 5 cms thick including supply of all materials, labour, T and P etc. required for proper completion of work. SOR-21.20
15
1800
120
Providing and fixing uPVC Pipe (6.0 Kg. per Sqcm pressure) Kisan/Supreme Quality or Equivalent) includes jointing of pipes & fittings with one step uPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
Single socket pipes 110mm diametre. (DSR-18/12.41.2/SOR)
67.5
19765
292.82
Providing and fixing white vitreous china pedestal type water closet (Indian type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid. (DSR-18/17.1.1/SOR)
6
22249
3708.25
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White vitreous China wash basin size 630x450 mm with a single 15mm C.P. brass pillar taps. (DSR-18/17.7.2/sor)
4
7870
1967.67
Providing and fixing uPVC Pipe (6.0 Kg. per Sqcm pressure) Kisan/Supreme Quality or Equivalent) including all uPVC fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
Single socket pipes 110mm diametre. (SOR)
20
8077
403.85
Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
-
-
-
100 mm inlet and 100 mm outlet. Sand cast iron S&S as per IS: 3989 (DSR-18/17.60.1.1/SOR)
5
4950
990.18
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe 32 mm dia DSR-18/17.28.1.1/AR
4
304
76.15
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular Type: 100 mm nominal dia. (DSR-18/18.58.1.1/SOR)
6
197
32.89
150 mm nominal size square 100 mm diameter of the inner hinged round grating. (DSR-18/18.58.2.1/SOR)
15
2200
146.72
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work - Exposed on wall:
-
-
-
20 mm nominal outer dia Pipes (DSR-18/18.7.2/SOR)
25
4916
196.67
25 mm nominal outer dia Pipes (DSR-18/18.7.3/SOR)
25
6268
250.73
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia Pipes (DSR-18/18.8.1/SOR)
15
3772
251.53
20 mm nominal outer dia Pipes (DSR-18/18.8.2/SOR)
15
4664
310.99
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge. External work:
-
-
-
25mm nominal outer dia pipes (DSR-18/18.9.3/SOR)
20
4771
238.55
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
25 mm nominal bore (DSR-18/18.17.1/SOR)
4
1726
431.6
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:
-
-
-
25 mm nominal bore (DSR-18/18.18.3/SOR)
2
684
342.03
Providing and fixing unplasticised PVC connection pipe with brass unions:
-
-
-
45 cm length: 15 mm nominal bore (DSR-18/18.21.2.1/SOR)
6
432
72.06
Providing and fixing PTMT bib cock of approved quality and colour.
-
-
-
15mm nominal bore, 86 mm long, weighing not less than 88 gms DSR-18/ 18.54.1/AR
8
809
101.19
Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. :
-
-
-
(DSR-18/18.63/SOR)
6
809
134.87
Providing and placing on terrace (at all floor levels) polythylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR-18/18.48/SOR)
2000
15280
7.64
Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar including filing joints with jamuna sand (with M-150 bricks) complete. DSR-18/11.2 AR
790
451366
571.35
Providing and laying 60mm Thick ISI mark factory made Cement Concrete interlocking paver block made by block making machine with strong vibratroy compaction of approved size, design, shape, laid in required coloured of M-35 & pattern over and including averege 50mm Thick Compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge with conforming to ISI - 15658 & IRC : SP : 63 A.R.(GINIDA)
790
590920
748
Part-H Rennovation of Ambeddkear park
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR-18/15.56/AR
257.32
5267
20.47
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar DSR-18/15.7.4/AR
5.38
4195
779.76
Providing and laying 60mm Thick ISI mark factory made Cement Concrete interlocking paver block made by block making machine with strong vibratroy compaction of approved size, design, shape, laid in required coloured of M-35 & pattern over and including averege 50mm Thick Compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge with conforming to ISI - 15658 & IRC : SP : 63 A.R.(GINIDA)
327.7
245119
748
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
32.77
190721
5820
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-18/13.5.2/AR
172.76
33057
191.35
12mm cement plaster of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-13/13.4.2/P-222
172.76
28472
164.81
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)
-
-
-
25 mm thick.DSR-18/11.26/AR
135.5
178572
1317.88
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
-
-
-
20mm thick.DSR-18/11.27/AR
10.8
14922
1381.7
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.
-
-
-
Same as item 660 but for weather coat.(Asian or Berger Brand) SOR-660-New Item
490.82
41228
84
Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.As in item (649) above but for every coat after the first coat. (SOR-650)
410.91
28352
69
Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. (SOR)
901.73
56808
63
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-18/13.50.3/SOR)
102.92
3298
32.05
Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. As in item (641) above but for every coat after first coat. SOR-642
102.92
8645
84
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:
-
-
-
(a) Applying a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
-
-
-
(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.
-
-
-
(c) After two days of proper curing applying a second coat of cement slurry using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
-
-
-
(d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep.
-
-
-
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
-
-
-
With average thickness of 120mm and minimum thickness at khurra as 65mm. (DSR-18/22.7.1/SOR)
128
131148
1024.6
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR-18/18.48/AR
1000
7640
7.64
Providing and fixing white vitreous china pedestal type water closet (Indian type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid. (DSR-18/17.1.1/SOR)
2
7416
3708.25
Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
-
-
-
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. DSR-18/17.7.1/AR
2
4472
2236.44
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. (DSR-18/17.4.2/SOR)
2
9822
4911.41
Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 122mm long, weighing not less than 99 gms DSR-18/ 18.54.2/AR
6
844
140.68
Providing and fixing PTMT bib cock of approved quality and colour. 15mm nominal bore, 86 mm long, weighing not less than 88 gms DSR-18/ 18.54.1/AR
10
1011
101.19
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe 32 mm dia DSR-18/17.28.1.1/AR
6
456
76.15
Providing and fixing uPVC Pipe (6.0 Kg. per Sqcm pressure) Kisan/Supreme Quality or Equivalent) includes jointing of pipes & fittings with one step uPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
Single socket pipes 110mm diametre. (DSR-18/12.41.2/SOR)
9
2574
286.02
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular Type: 100 mm nominal dia. (DSR-18/18.58.1.1/SOR)
10
328
32.89
150 mm nominal size square 100 mm diameter of the inner hinged round grating. (DSR-18/18.58.2.1/SOR)
5
733
146.72
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
25 mm nominal bore (DSR-18/18.17.1/SOR)
1
431
431.6
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:
-
-
-
25 mm nominal bore (DSR-18/18.18.3/SOR)
1
342
342.03
Providing and fixing unplasticised PVC connection pipe with brass unions:
-
-
-
45 cm length: 15 mm nominal bore (DSR-18/18.21.2.1/SOR)
6
432
72.06
Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. :
-
-
-
(DSR-18/18.63/SOR)
2
269
134.87
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work - Exposed on wall:
-
-
-
15 mm nominal outer dia Pipes (DSR-18/18.7.1/SOR)
20
2923
146.19
20 mm nominal outer dia Pipes (DSR-18/18.7.2/SOR)
10
1966
196.67
PART- I SHAMSHAN GHAT
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR-18/15.56/AR
710
14533
20.47
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar DSR-18/15.7.4/AR
8.28
6456
779.76
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (including equivalent design mix). (DSR-18/15.2.1/SOR)
0.95
877
923.42
Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unserviceable material
-
-
-
within 50 metres lead : (DSR-18/15.24/AR)
27.6
13799
499.97
Re-laying of dry brick on edge floors with brick filling the joints with fine sand all complete as per direction of engineer-in-charge GNIDA A.R.
120
18982
158.19
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only.
-
-
-
0.00 TO 1.50 M (SOR-251a)
268.36
25494
95
Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar including filing joints with jamuna sand (with M-150 bricks) complete.DSR-18/11.2/AR
701
400516
571.35
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
117.04
681172
5820
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in foundation including necessary Cutting & molding of brick as required. for walls of one brick thick. including supply of all materials, labour and T&P etc. required for proper completion of the work. SOR-310
70.04
346698
4950
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure including necessary Cutting & moulding of brick as required. for walls of one brick thick. including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-310
56.98
315669
5540
Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & manual placing .
-
-
-
MORTH-9.06 E/Case-II
57.77
464700
8043.97
Cast cement concret door sills chaukhets boundary posts shelves and similar small work with cement approved coarse sand and 2cm gauge stone grit in proportion of 1:2:4: excludingi its fixing and binding the same with 24 B.W. G.G.I binding moulds all materials labour, tool &plants etc. required for proper competion of the work the rate excludes making of drip course which shall be paid extra SOR -282
7.64
53480
7000
Providing precast cement concrete JaIi 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits.50 mm thick. DSR-13/5.18.1/P-99
265.92
195451
735
Washed stone grit plaster on exterior walls of height up to 10 M. above level in two layers, under layer 12mm cement plasster 1:4(1cement:4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 kg of cement per square metre, top layer 15mm cement plaster1:1/2:2(1cement:1/2coarse sand :2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete as per specfication and direction of Engineer-in-charge (Payment for providing grooves shall be made separately).DSR-18/13.72/P-228
584.02
327617
560.97
Forming groove of uiform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens. Nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge:
-
-
-
15mm wide and 15 mm deep groove DSR-18/13.73.1/ P-228
2237.37
71327
31.88
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.DSR-18/5.30
2237.37
68754
30.73
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-18/13.5.2/AR
712.47
136331
191.35
12mm cement plaster of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-13/13.4.2/P-222
48
7910
164.81
Finishing wall one coat of water proof cement paint of approved quality on new work with two coat to give an even shade including supply of all material labour tools & plant etc. required for proper complition of the work
-
-
-
same as item( 660) but for wether coat (Asian or berger brand)
712.47
59847
84
Steel work in built up tubular ( round, square or rectanglar hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped
washers etc. complete.
-
-
-
Hot finished welded type tubes.DSR-18/10.16.1/SOR
3198.23
338308
105.78
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work SOR-642
192.9
16203
84
Providing corrugated G.S.sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.l. limpet washers or with G.l. impet washers filled with white lead and including a coat of approved steel primer and two coats of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, raffers and trusses and including cutting to size and shape wherever required.
-
-
-
1.00mm thick with zinc coating not less than 275gm/Sqm DSR-13/12.1.1/P-204
213.85
196068
916.85
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Sail Steel)
-
-
-
Thermo-mechanically treated bars/Cold twisted bars. (DSR-18/5.22.6/SOR)
4534.95
418938
92.38
Providing and laying 60mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (AR/GNIDA)
510
381480
748
Plain cement concrete in open foundation complete as per drawing and technical specifications. PCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. 15.11/D/Case-II)
57
453258
7951.91
Part-J KABRISTAN
-
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR-18/15.56/AR
570
11667
20.47
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-18/13.5.2/AR
284.99
54532
191.35
12mm cement plaster of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-13/13.4.2/P-222
284.99
46969
164.81
Finishing wall one coat of water proof cement paint of approved quality on new work with two coat to give an even shade including supply of all material labour tools & plant etc. required for proper complition of the work
-
-
-
same as item( 660) but for wether coat (Asian or berger brand)
814.26
68397
84
Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. (SOR)
814.26
51298
63
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-18/13.50.3/SOR)
12.6
403
32.05
Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar including filing joints with jamuna sand (with M-150 bricks) complete.DSR-18/11.2/AR
120
68562
571.35
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
12
69840
5820
Providing and laying 60mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (AR/GNIDA)
120
89760
748
Part-K Rain Water Harvesting
-
-
-
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only.
-
-
-
0.00 TO 1.50 M (SOR-251a)
117.55
11167
95
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-281)
4.34
25258
5820
M-150 Brick Work in 1:4 cement & Coarse sand 2.2 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-305a
41.88
207306
4950
Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & manual placing .
MORTH-9.06 E/Case-II
3.94
31693
8043.97
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. AR- (Sail Steel)
386.61
35715
92.38
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6 (1cement:6 coarse sand) DSR-18/13.5.2/AR
120.96
23145
191.35
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.
-
-
-
EHD - 35: Circular shape 560 mm internal dia. (DSR-18/19.19.4.1/sor)
6
9884
1647.48
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. All types of soil,
-
-
-
350 mm dia DSR-18/23.1.1.2/SOR
60
26650
444.17
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
150 mm nominal size dia DSR-18/23.4.2/SOR
20
12904
645.2
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.150 mm nominal size dia.DSR-18/24.3.2/sor
40
23885
597.14
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.. DSR-18/23.7/SOR
8
8706
1088.33
Supplying, filling, spreading & leveling gravels of size range 4.6 mm to 4.8 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR-18/23.6/SOR
8
8706
1088.33
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. SDR-18/23.5/SOR
9.8
10665
1088.33
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete.DSR-18/9.50/SOR
18.84
21201
1125.35
`Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. DSR-18/23.8/SOR
4.81
5888
1224.22
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. DSR-18/23.12/SOR
16
10006
625.39
Labour cess will be paid extra as per applicable
-
-
-
GST will be paid extra as per applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements