Greater Noida Industrial Development Authority Tender

S/E of Section Double pole structure on ST pole 410 SP-62 with 1/6 over length of poles grounted with cement concrete in 1:3:6 (one cement : 3 coarse sand :6 Stone balleast) including plingthing of pole 30 cm above grade level, plastering of plinth including excavation & back filling etc. The double pole structure consist of 100X50X2.24 mtr. & 75X40 mm 2.24 mtr. M.S. channel and bracings with M.S. clamp packing piece Nuts Bolts etc. The rates includes all materials labour T&P etc. required for proper completion work as per direction of E/I

Supply, delivery, laying testing & commissioning of 11KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 11 KV, 50 Hz. A.C system surface the cable run shall be fixed on M.S clamps etc. of suitable size or as directed by the E/I. complete in all respect. the price are inclusive of all earth work such as digging, back filling supply & spreading of good earth all around the cable, supply & providing cable identification markers.The installation should be complete in all respects and as per requirement of the job (CCI (Bombay/Nashik), Fort Gloster (Calcutta / Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Make

3CX300 Sqmm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : DSR-10.5.4

300 Sqmm

Supplying and laying of following sire DWC HOPE pipe marked along with all accessones ska socket, bend couplers etc conforming to 15 14930. Part II complate with fitting and cutting jointing etc direct in ground 175 om below ground level) ncluding excavation and efiting the trench but excluding sand cushioning and protective covering etc complete as required DSR-14 16:4

160 mm Dia

SF of cross arm made of 100X50 mm M.S. channel 2.5 mtr long on poles with packing piece, MS clamp Nut bolts etc complete in all respect. FTS-134162 (2022-23

Supply & erection of overhead line with ACSR conductor on poles/service bracket including binding etc complete in all respects, UPPWD-627

Supply & erection of overhead line with G.1. wire no 8 to 4 SWG on pales senice bracket including binding etc complete in all respect. UPPIWD-628

S/F of 0.3 mtr long top channel for pin made of 100x50mm MS Channel with M.S. Clamp including nut bolts etc complete in all respect FTS-130720 (2022-23)

S/F of cross arm made of 100x50mm MS. Channel 1.15 mtr long with M.S clamp packing piece Nut bolts etc. Nos complete in all respect, FTS

Supplying and erection of 11 KV pin insulator complete with large steel head G.I pin nuts, washers etc as Nos equired DSR-13 10

Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings all and socket type and complete with galvanised strain clamps Nos bolts nuts washers etc as required DSR-13 11

S/E of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mma600mm double screw lightener 7/4 00 mm G.I stay wire etc in 1:3:6 cement concrete in all respect (UPPWD-630)

Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. (UPPWD 634)

Supply & erection of strut stay set with Steel Tubular pole 410 SP-58 including grouting as per (item No 18) complete in all respect

Supoly & faxing of MS rod earthing ng with 2.5 m long solid 20 mm dia hot dipped 1 galvanised MS rod burned til solid. the top reaches 1.7 nits Below the GL. complete with boits & nuts & Gl earth wre ERP-2023/967

Supply & erection of clamps of 140 mm Gmm flat iron on steel tubular poles/steet rad poles with bolts nuts etc complete in all respects including painting with aluminum paint UPPWD-623

Labour Cess will be paid extra as per applicable

GST will be paid extra as per applicable