Greater Noida Industrial Development Authority Tender

Wiring point for two ways light with 1.5 sq. mm. F.R. PVC insulated multiststrand single core copper conductor cable in heavy guage PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement beforeconcreting complete with 1.5 sqmm FRLSH PVC insulated multistrand copper conducter cable as earth wire drain inside the conduit, GP Box , and two number two way modular type switches & ceiling rose /angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect, as directed, including matching colour wash. item no.139 C+187B

Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in pvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm copper conductor as earth wire etc continuity wire and modular type switch and socket etc., complete in all respect including matching colour wash. item no 141C+187C

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type modular socket in suitable M.S. box of 175mm x 100mm x 50mm size with modular switch & socket in place of piano type switch & socket. item no.1139+187C

Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC with conduit partly laid in slab along with reinforcement before concreting and partly concealed in wall, with one no. 1.5 sq mm FRLSH PVC insulated 1100 V grade multistrand single core copper conduct copper earth continuity wire etc. complete in all respect including matching colour wash. UPPWD-2018. Sch. No.1307 (C)

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one No. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth contuiity wire drawn in conduit including matching colour wash etc., complete in all respect.item no.216 C

Supply and wiring of submain with two number 10 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25mm dia heavy duty PVC conduit on surface, with one number 6 sq mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire etc.complete in all respect. item no.213 C

Supply and wiring of submain with two number 16 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25mm dia heavy duty PVC conduit on surface, with one number 10 sqmm FRLSH PVC insulated multistrand copper canductor cable as earth continuity wire etc. complete in all respect. item no.214 C

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm& brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of the work. UPPWD-18, sch. no. 1149

S&F surface/flush mounting 4ways SPN distribution board with additional metal door without MCB complete in all respect, as directed by Engineer in charge. CAT-B item no.1022B

S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.CAT- B item no.1028A

S&F of 40 Amp. D.P. Isolator CAT- B item.no.1005 A

S&F of 63 Amp. 4 Pole Isolator CAT- B item.no.1007 B

S&F single pole MCB blanking plate CAT. B item no 1034 B

S&F of 6 Amp to 32 Amp. SP MCB (10 KA) C Curve CAT-B item no.1002

Supply of 1200mm sweep ceiling fan complete with double ball bearings, bladers, down rod, shackle insulator, canopy etc. complete as required. item no 1501 Model: BEE 4 star rating 1200 mm Sweep.

Supply, Installation, testing and commissioning of 300mm dia exhaust fan complete in all required (AR) FTS-131561

Supply and fixing of electronic fan regulator( Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the atisfaction of Engineer in charge of work. (Item no. 1203c)

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.CAT- AA Item no.1413

Supply & fixing of 8mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. (UPPWD-643)

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect. CAT-AA (UPPWD-1422)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per UPPWD schedule 2018 item no 501

4CX16sqmm

3.5CX120 sqmm

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed,underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. as per UPPWD schedule 2018 item no 503

4CX16 Sqmm

3.5CX120 Sqmm

Supply and fixing of plain or pin type copper tin plated cable socket ( Lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. UPPWD schedule 2018 item no 504

4CX16 Sqmm

3.5CX120 Sqmm

Supply and Wiring of submains with two nos. of 2.5 sq. mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. UPPWD-18, sch. no. 289

Supply and fixing of following dia G.I. pipe (B class) in pole used as S/L Bracket for fixing of LED S/L fitting for cable entry including bending the pipe to the required shape complete as required (Each piece make 1.5 mtr. long). DSR-18/11.6.2 (use as street light bracket)

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. item no 701(for TPN DB & High Mast)

Supply and fixing following capacity of automatic street light cubicle contoral panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with L&T make ML-4. contactors, HRC fuse, isolating metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

25Amp.TPN (As per UPPWD sch 2018 item no. 807 e (2)

S/L of 90mm dia. DWC HDPE pipe ISI marked for drawing of power cable across the road laying in groud at 1 mtr. below the road level complet in all respect as per DSR-14.15.2 (2018)

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per irection of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only.

100 Amp. TPN-1 No. and 63 Amp. TPN-3 Nos. (UPPWD-802C)

Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. (UPPWD-1131)

Supply and fixing of shock treatment chart (prescribed under I.E. rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work (UPPWD-1134)

Supply and laying of 1800mm x 900mm x 12mm thick chequered rubbbber matting of tested quality (UPPWD-1136).

Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules. (UPPWD-1109)

Labour cess will be paid extra as per applicable

GST will be paid extra as per applicable