Greater Noida Industrial Development Authority Tender

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-281)

RCC grade M-25 using batching plant transit mixture & manual placing case-2

MORTH-2020/15.11

Steel reinforcement for R.C.C work Including straightening, cutting, bending, placing in position and binding all complete up to plinth level.(Sail Steeel)

Cold twisted bars. DSR-18/5.22.3

Fabrication & Manufacturing of Prestressed Hollow Core slab (Hollow area 25 to 30%) of different thickness & modular width 1200 mm in Controlled Factory Environment with approved methodology informing to IS 10297-1982 conforming to IS: 10297- 1982 by using long line casting method having arrangement of proper steel bed. Concreting should be done by batch mixing plant capable of producing zero slump concrete, transported through automatic shuttels of standard make & layed on bed with the help of extruder/Slipformer, finishing, curing and also provision of steam curing. Cutting, making necessary cutout/holes of required sizes for services in slab element after achieving required strength, yard handling & stacking all complete as per approved shop drawings & design mix as per the direction of the Engineer-in-charge. (Cost of strands should be paid separately).

Concrete Grade M-40 (cement content 400kg) 200 mm thick hollow. DSR 2018/26.73.1.4

Extra for using M-50 (cement content 425kg) instead of M-40 200mm thick hollow core slab. DSR-2018/26.73.2.4

Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing & destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in-charge. DSR-2018/26.75

Transportation of precast Elements by flat bed trailor(double/triple axle 40ft length width proper accessories like a frame etc) from factory, incluidng the cost of loading, unloading & stacking at site with the help of required capacity cranes.

Laed within 15 km. DSR-2018/26.76

Erection & Installation of Precast/Prestressed Concrete elements in correct & final position with proper line level and plumb at site making all arrangements (i.e cranes, push-pull jacks & all another T & P for lifting Placing & Alignment of elements, within erection tolerance as per IS 15916 as per approved shop drawings and all complete as per the direction of Engineer-in-Charge but excluding the cost of sim pads, non shrink grout and steel works i.e hangers. All work up to fifth floor.

Prestressed hollow core Slab up to 200 mm thickness. DSR-2018/26.77.1

Labour Cess will be paid extra as per applicable

GST will be paid extra as per applicable