Greater Noida Industrial Development Authority Tender

... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.

Greater Noida Industrial Development Authority - GNIDA Tender

Works
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date13 Feb 2025
Closing Soon27 Feb 2025
Tender Amount₹ 4,37,78,330 
Notes
Download

AI Insights

Bid Capacity
... View More
To extract the bid capacity required, we look at the financial requirements and formulas provided. The bid capacity is related to the ability to handle works of certain values, with specific multipliers and percentages. For works more than 1.5 times the bid value, with a bid value up to Rs. 15.00 Lacs, the bid capacity required is 5% of the bid value. For works more than 1.5 times the bid value, with a bid value between Rs. 15.00 Lacs and Rs. 100.00 Lacs, the bid capacity required is 10% of the bid value. For works more than 1.5 times the bid value, with a bid value between Rs. 100.00 Lacs and Rs. 500.00 Lacs, the bid capacity required is 12% of the bid value. For works more than 2.00 times the bid value, with a bid value above Rs. 500.00 Lacs, the bid capacity required is 12% of the bid value. Given the estimated cost of the tender is Rs. 437.78 Lacs, which falls between Rs. 100.00 Lacs and Rs. 500.00 Lacs, the bid capacity required can be calculated using the formula: Bid capacity = 12% of the bid value for works more than 1.5 times the bid value. However, since the provided information does not explicitly mention the bid value but rather the estimated cost, and considering the conditions provided, we can infer that the bid capacity is directly related to the estimated cost and the specified percentages for the given range. Thus, for the given tender with an estimated cost of Rs. 437.78 Lacs, the relevant bid capacity requirement is 12% of the bid value, considering the bid value falls within the specified range for this percentage. Given this, the bid capacity required for the tender can be considered as 12% of the bid value, but since the exact bid value is not provided and we are working with the estimated cost, the precise calculation would depend on the actual bid value submitted, which should be within the range that applies this 12% rule. Therefore, the answer is: 12% of the bid value for bids between Rs. 100.00 Lacs and Rs. 500.00 Lacs.
Technical Capacity
... View More
The required prior work experience for the bidder includes: * Three similar completed works costing not less than 40% of the estimated cost put to tender * Two similar completed works costing not less than 60% of the estimated cost put to tender * One similar completed work of aggregate cost not less than 80% of the estimated project cost put to tender The experience of having successfully completed works during the last 7 years is considered acceptable. Similar completed works mean providing and laying of distribution water works, and the similar work means commercial work of similar nature as the tender being asked for. The values and percentages of similar works completed are: - 40% of the estimated cost put to tender for three similar completed works - 60% of the estimated cost put to tender for two similar completed works - 80% of the estimated project cost put to tender for one similar completed work - 5% to 12% of the bid value for liquid assets, depending on the bid value. Additionally, the cumulative financial turnover and current liquid assets should be as under: - For works more than 1.5 times the bid value, the cumulative turnover during the last three consecutive years should be at least the bid value, and the liquid assets should be at least 5% to 12% of the bid value, depending on the bid value.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329:

-

-

-

... More
250 mm dia Ductile Iron Class K-9 pipes DAR-18/18.72.18

5700

2630

14996130

... More
150 mm dia Ductile Iron Class K-9 pipes DAR-18/18.72.16

50

1375

68797

... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement trenching ,refihling & testing of joints complete as per direction of Engineer in Charge.150mm nominal inner dia .Pipes. DAR-18/18.9.10

2695

4928

13283304.65

... More
Providing push-on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket 250 mm dia pipes DAR-18/18.70.4

950

166

157785.5

... More
Supply of following of C.I sluice valves/N.R.V kirloskar make as per IS : 14846, C.I body/wedge/bronge rings complete with bolts nuts rubber etc. (GNIDA)

-

-

-

... More
250 mm dia Sluice Valve.

18

14461

260310.06

... More
100 mm dia Sluice Valve.DAR-18/18.31.1

35

3279

114790.2

... More
Providing and laying Double Flanged (screwedl welded) Centrifugally (Spun) Cast Iron, Class B (IS: 1536)

-

-

-

... More
250 mm dia C.l. Double Flanged Pipe DAR-18/18.71.4

285

4662

1328744.1

... More
Providing and laying DI. specials of class K-12 suitable for push-on jointing as per IS : 9523 Up to 600 mm dia DAR-18/18.68.1

153.49

14657

2249715.21

... More
Providing and laying flanged Cl. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS :1538: Up to 300 mm dia. DAR-18/18.26.1

115.12

6642

764711.08

... More
Providing and fixing gun metal gate valve with Cl. wheel of approved quality (screwed end): 25 mm nominal bore DAR-18/18.17.1

30

431

12948

... More
Providing and fixing brass ferrule with C.l. mouth cover including boring and tapping the main: 15 mm nominal bore DAR-18/18.20.1

60

256

15373.8

... More
Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. DAR-18/18.12.1

60

170

10258.2

... More
Providing and fixing G.l. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15 mm nominal bore DAR-18/18.46.1

60

128

7710.6

... More
Providing and fixing Bolts and nuts 16 mm dia 65 mm long DAR-18/1957

8445

13

117723.3

... More
Rubber Gaskets Conforming to I.S 5382 of S.B.R quality 250 mm dia DAR-18/7670

150

85

12892.5

... More
Supply and Filling with jamuna sand.RMR 1200

529.13

1200

634956

... More
Supply and Installation of required size steel pipe 10mm thick conforming to IS 3589 through trenchless excavation of thrust pit and reciving pit required size and the excavation & filling back & compaction complete as per specification for road crossing by Auger boring method. Pipe will be installed at depth beyond 3m below the ground surface in downward required slope.

-

-

-

... More
250 mm dia

627

10270

6439290

... More
150 mm dia

140

7040

985600

... More
Constructing masonry Chamber 120x120x100 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.l. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DAR-18/18.35.1

18

15577

280402.56

... More
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.l. surface box 350x350 mm. top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement: 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: With F.P.S. bricks DAR-18/18.35.1

35

6328

221501

... More
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. ( As per item sor no. 279)

47.7

7000

333900

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. DAR-18/5.22.6 (Sail Steel)

7488.9

86

651234.74

... More
Labour Cess and GST will be paid extra as per govt. orders

-

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.