Greater Noida Industrial Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Greater Noida Industrial Development Authority - GNIDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Mar 2024
Closing Date18 Mar 2024
Tender Amount₹ 65,48,539
Costs
EMD
₹ 1,31,000Document Cost
₹ 1,840Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GNIDA_913201_9Bid Award Id
ViewTender No
SM/(E-TENDER CELL)/2024/501 DATED-05.03.2024Tender Authority
Greater Noida Industrial Development Authority ViewPurchaser Address
-Website
http://https://www.greaternoidaauthority.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from 'the site of work and including watering,dressing etc. labour and T&P etc. required for the proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. SOR
35.4
16284
460
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%. SOR/DSR-18/2.34.1
147.02
25632
174.35
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment - Along the external wall below concrete or masonry - With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration SOR/DSR-18/2.35.2.1
66
1592
24.13
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor :
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. SOR/DSR-18/2.35.3.1
195.06
23959
122.83
... More
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :
-
-
-
... More
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. SOR/DSR-18/2.35.4.1
66
1210
18.34
... More
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. SOR/DSR-18/2.35.5
118.1
24675
208.94
... More
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-281)
16.63
96786
5820
... More
2.5 cm thick and of cement concrete consisting of 1 part cement, 1½ parts approved coarse sand and 3 parts approved 10 mm. graded stone grit and including water proofing material as ordered by the Engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. (SOR-361)
48.81
17571
360
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling and dressing and finishing the top smooth. SOR/DSR-18/4.17
15.87
8377
527.87
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-18/5.22.6/SOR) (Sail Steel)
14812.95
1368420
92.38
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections (DSR-18/5.30/SOR)
53.19
1686
31.7
... More
Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & manual placing .
-
-
-
... More
MORTH-9.06 E/Case-II
71.84
577878
8043.97
... More
Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & manual placing . MORTH-9.06 E/Case-II
53.96
434052
8043.97
... More
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-305a
24.55
121522
4950
... More
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure including necessary Cutting & moulding of brick as required. for walls of one brick thick. including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-310
47.84
265033
5540
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
... More
Using M.S. angels 40x40x6 mm for diagonal braces (DSR-18/10.5.1/SOR)
17.64
57319
3249.41
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
Size of Tile 600x600 mm (DSR-18/11.41.2/SOR)
176.44
211032
1196.06
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
Size of Tile 600x600 mm (DSR-18/11.47.2/SOR)
10.67
13385
1254.5
... More
Making Khurra 45 cms x 45 cms with c.c. 1 : 2 : 4 average 5 cms thick including supply of all materials, labour, T and P etc. required for proper completion of work. SOR-21.20
7
840
120
... More
Providing and fixing uPVC Pipe (6.0 Kg. per Sqcm pressure) Kisan/Supreme Quality or Equivalent) includes jointing of pipes & fittings with one step uPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
Single socket pipes 110mm diametre. (DSR-18/12.41.2/SOR)
28
8008
286.02
... More
12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) (DSR-18/13.4.2/SOR)
305.74
50389
164.81
... More
15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement : 6 coarse sand) (DSR-18/13.5.2/SOR)
324.16
62028
191.35
... More
6mm cement plaster of mix: 1:3 (1 cement : 3 fine sand) (DSR-18/13.16.1/SOR)
204.12
27080
132.67
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR-18/13.41.1/SOR)
522.17
36029
69
... More
Finishing walls with textured exterior paint of required shade: New work (two or more coats applied @ 3.28 Ltr./10 Sqm) over and including primer coat of exterior primer applied @ 2.20kg/10 Sqm.(DSR-18/13.45.1/SOR)
195.25
30351
155.45
... More
Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. As in item (641) above but for every coat after first coat. SOR-642
140.49
11801
84
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-18/13.80/SOR)
684.02
43093
63
... More
Providing and fixing GI hexazonal chicken wire mesh of size 12mmx22g at the junction of disimilar surfaces of brick masonary wall and RCC column by beams and the like including necessary nails for fixing etc. complete all as per specification and direction of engineer-in-charge.
136.6
9562
70
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately):
-
-
-
... More
For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR-18/21.1.1.2/SOR)
302.4
108682
359.4
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron). (DSR-18/21.1.2.2/SOR)
252
104370
414.17
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 4.0 mm thickness. (DSR-18/21.3.1/SOR)
25.2
21742
862.79
... More
Filling the gap in between aluminium frame & adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge compete. Upto 5mm depth and 5 mm width. (DSR-18/21.8.1/SOR)
75.6
5215
68.99
... More
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:
-
-
-
... More
(a) Applying a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
-
-
-
... More
(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
-
-
-
... More
(d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep.
-
-
-
... More
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
-
-
-
... More
With average thickness of 120mm and minimum thickness at khurra as 65mm. (DSR-18/22.7.1/SOR)
180.09
191992
1066.09
... More
Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar including filing joints with jamuna sand (with M-150 bricks) complete.DSR-18/11.2/AR
656.92
375331
571.35
... More
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
-
-
-
... More
(SOR-281)
65.69
382327
5820
... More
Providing and laying 60mm Thick ISI mark factory made Cement Concrete interlocking paver block made by block making machine with strong vibratroy compaction of approved size, design, shape, laid in required coloured of M-35 & pattern over and including averege 50mm Thick Compacted bed fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge with conforming to ISI - 15658 & IRC : SP : 63 A.R.(GINIDA)
656.92
491376
748
... More
Part-B Rain Water Harvesting
-
-
-
... More
Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). For Building work only.
-
-
-
... More
0.00 TO 1.50 M (SOR-251a)
117.57
11169
95
... More
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
-
-
-
... More
(SOR-281)
4.34
25258
5820
... More
M-150 Brick Work in 1:4 cement & Coarse sand 2.2 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work.
-
-
-
... More
SOR-305a
41.88
207306
4950
... More
Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 using batching plant transit mixer & manual placing .
-
-
-
... More
MORTH-9.06 E/Case-II
3.94
31693
8043.97
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. AR- SAIL STEEL
618.58
57144
92.38
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
... More
1:6 (1cement:6 coarse sand) DSR-18/13.5.2/AR
120.96
23145
191.35
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.
-
-
-
... More
EHD - 35: Circular shape 560 mm internal dia. (DSR-18/19.19.4.1/sor)
6
9884
1647.48
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer –in-charge, upto 90 metre depth below ground level. All types of soil,
-
-
-
... More
350 mm dia DSR-18/23.1.1.2/SOR
60
26650
444.17
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
150 mm nominal size dia DSR-18/23.4.2/SOR
20
12904
645.2
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.150 mm nominal size dia.DSR-18/24.3.2/sor
40
23885
597.14
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge.. DSR-18/23.7/SOR
8
8706
1088.33
... More
Supplying, filling, spreading & leveling gravels of size range 4.6 mm to 4.8 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR-18/23.6/SOR
8
8706
1088.33
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. SDR-18/23.5/SOR
9.8
10665
1088.33
... More
Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete.DSR-18/9.50/SOR
18.84
21201
1125.35
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. DSR-18/23.8/SOR
4.81
5888
1224.22
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. DSR-18/23.12/SOR
16
11912
744.52
... More
Part-C Rennovation of Multy Purpose Building
-
-
-
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
687.74
14078
20.47
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar DSR-18/15.7.4/AR
7.25
5653
779.76
... More
M-150 Brick Work1:4 one cement & four Coarse sand of 2.20 F.M. mortar in superstructure including necessary Cutting & moulding of brick as required. for walls of one brick thick. including supply of all materials, labour and T&P etc. requried for proper completion of the work. SOR-310
15.88
87975
5540
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
... More
1:6 (1cement:6 coarse sand) DSR-18/13.5.2/AR
233.49
44678
191.35
... More
12mm cement plaster of mix:
-
-
-
... More
1:6 (1cement:6 coarse sand) DSR-13/13.4.2/P-222
171.2
28215
164.81
... More
6mm cement plaster to ceiling of mix:
161.7
21452
132.67
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : Ggraded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. DSR-18/4.17/AR
32.36
17083
527.87
... More
Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.
16.65
96884
5820
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 coarse sand)
159.6
210333
1317.88
... More
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work.
-
-
-
... More
SOR-660
566.39
24921
44
... More
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-18/13.50.3/SOR)
33.57
1075
32.05
... More
Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950. As in item (641) above but for every coat after first coat. SOR-642
33.57
2819
84
... More
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:
-
-
-
... More
(a) Applying a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
-
-
-
... More
(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
-
-
-
... More
(d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep.
-
-
-
... More
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
-
-
-
... More
With average thickness of 120mm and minimum thickness at khurra as 65mm. (DSR-18/22.7.1/SOR)
159.6
170147
1066.09
... More
Providing and fixing uPVC Pipe (6.0 Kg. per Sqcm pressure) Kisan/Supreme Quality or Equivalent) includes jointing of pipes & fittings with one step uPVC solvent cement & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
Single socket pipes 110mm diametre. (DSR-18/12.41.2/SOR)
24
6864
286.02
... More
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
150 mm nominal size square 100 mm diameter of the inner hinged round grating. (DSR-18/18.58.2.1/SOR)
5
733
146.72
... More
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (Sail Steel)
800
70808
88.51
... More
Labour Cess will be paid extra as per applicable
-
-
-
... More
GST will be paid extra as per applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements