Greater Noida Industrial Development Authority Tender

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (DSR- 2018/1.23.3/5)

15/16 A Switch

6 Pin 15/16 A socket outlet

Supply and Wiring of submains with 3 nos 2.5 sq mm FRLSH PVC insulated multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge item no.289 P

Same as in itme no. 289 but with 3 nos. 4 sq. mm. FRLSH PVC insulatedmultistrand copper conductor cable. item no.289 B

S & F surface/Flush mounting 4ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT-B item no.1022A

S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT-B item no.1029A

S&F of 63 Amp. 4 Pole Isolator CAT- B item.no.1007 B

S&F single pole MCB blanking plate cat. B item no 1034 B

S&F of 6 Amp to 32 Amp. SP MCB (10 KA) C Curve CAT-B item no.1002

Supply of 1200mm sweep ceiling fan complete with double ball bearings.bladers, down rod, shackle insulator, canopy etc. complete as requireditem no 1501 model- BEE 4 star rated 1200 mm sweep.

Motor winding of following size ceiling fan 1200mm (FTS-121235/21-22)

Supply, Installation, testing and commissioning of 300mm dia exhaust fancomplete in all required (AR) FTS-131561

Supply and fixing of electronic fan dimmer, 300/400 watt, ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. (Item no. 1203

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect CAT-AA Item no.1413

Supply & fixing of 8mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 135 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. (UPPWD-643)

Supply and fixing of LED Street light Fitting having die cast aluminum body and diffuser with driver set suitable for 52 watt to 72 Watt Confirming to IP66 Protection complete in all respect CAT AA (UPPWD-1422)

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Voits grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S clamps etc of suitable size or as directed by the Engineer-Incharge. complete in all respect The armouring of the cable shall be properly connected with the earth conductor by clamps etc as per up pwd schedule 2018 item no 501

4CX10sqmm

Supply and fixing of plain or pin type copper tin plated cable socket (Lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. Up pwd schedule 2018 item no 504

4CX10 sqmm

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in- Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. Incoming 200Amp. TPN-1No(UPPWD-2018/802

Out going 100 Amp. TPN-2

Supplying and fixing following piano type switch socket on the existing switch box/cover including connections etc. as required. 5/6 amps switch (DSR-1.23)

Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. (UPPWD-2018/807

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. As per UPPWD Schedule-701

Supply and laying of 25mm x 3mm G1 strip from earth electrode directly in the ground as required complete in all respect (UPPWD-2018/716)

S/F of M.S. Rod earthing with 2.5m long solid 20mm dia hot dipped gaivanished M.S. road buried till the top reaches 1.7mtr.. Below the GL complete with bolts & nuts and G.I. earth wire 7/14 (ERP-2023/967)

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc, as required. (DSR-2018/2.2.1)

100 A, 16 KA, TPMCCB

Erection and testing of ceiling fan complete with double ball bearing, bladers, down rod, complete in all respect. ((UPPWD-2018/1115)

S/L of 90mm dia DWC pipe for drawing of power cable across the road bydrilling of 120mm dia at 1mtr. Below the road level thereby doing the workproviding DWC pipe by manual Trenchless method. (ERP-2023/967)

Labour Cess and GST will be paid extra as per govt. orders