Greater Noida Industrial Development Authority Tender

Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. As per UPPWD Schedule-Item No. 289

Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. UPPWD schedule 2018 item no 701(for TPN DB & High Mast)

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. UPPWD Schedule- Item No. 716

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. as per UPPWD schedule 2018 item no 501

16 sq. mm 2 core (C)

16sqmm x4 core (I)

3.5CX25sqmm (J)

50 sq. mm 3-1/2 core (L)

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed,underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. as per UPPWD schedule 2018 item no 503

16 sq. mm 4 core (i)

25CX3.5 Sqmm (j)

50 sq. mm 3-1/2 core (L)

Supply and fixing of plain or pin type copper tin plated cable socket ( Lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.UPPWD schedule 2018 item no 504

10 sq mm (C)

16sq mm (d)

25 sq mm (e)

50 sq. mm (g)

Supply and fixing following capacity of automatic street light cubicle contoral panel painted with anticorrosive alkali and acid proof paint consisting of time switch TSO 100 series with ML-4. contactors, HRC fuse, isolating metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.

25Amp.TPN (As per UP.PWD schedule 2018 item no.807 e (ii)

Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. UPPWD schedule 2018 item no.653

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 150 Watt. Confirming to IP 66 protection complete in all respect. (As per UPPWD Schedule 2018) Item no. 1454 CAT-AA

S & F surface/Flush mounting 8ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. UPPWD schedule 2018 item no.1028A CAT B

S&F of 63 Amp. 4 Pole Isolator UPPWD schedule 2018 item.no.1007 B CAT B

S&F single pole MCB blanking plate UPPWD schedule 2018 item no 1034 B CAT- B

S&F of 6 Amp to 32 Amp. SP MCB (10 KA) C Curve UPPWD schedule 2018 item no.1002 CAT-B

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.CAT- AA UPPWD schedule 2018 Item no.1413

Supply and fixing of 36 Watt to 46 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.CAT-AA UPPWD schedule 2018 Item no.1406

Supply of 1200mm sweep ceiling fan complete with double ball bearings, bladers, down rod, shackle insulator, canopy etc. complete as required. UPPWD schedule 2018 item no 1501(Model: BEE Lister Rated 12mm sweep.)

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. UPPWD schedule 2018 Item no. 1203 A

Erection and testing of ceiling fan and regulator etc. excluding supply of down rod, complete in all respect. UPPWD schedule 2018 Item no.1115

Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. UPPWD schedule 2018 item no.1139

Wiring point for plug with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable in pvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm copper conductor as earth wire etc continuity wire and piano type switch and socket etc., complete in all respect including matching colour wash. UPPWD schedule 2018 item no 141-C

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand copper conductor cable in pvc conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5 sqmm pvc copper conductor cable as earthwire drawn inside the conduit .etc, GP Box, piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash. UPPWD schedule 2018 item no.140 C

Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable in pvc conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 1.5sq mm copper conductor cable as earth wire drawn inside . continuity wire,GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc complete in all respect as directed including matching colour wash. UPPWD schedule 2018 item no.138C

Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable partly laid in slab alongwith in 20 mm dia heavy duty (2mm thick) PVC conduit with 1 nos. 1.5 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable as earth continuity wire drawn inside the conduit complete in all respect. including matching colour wash. UPPWD schedule 2018 item no.1307 C

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2mm thick) PVC conduit with one No. 2.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth contuiity wire drawn in conduit including matching colour wash etc., complete in all respect. UPPWD schedule 2018 item no.216 C

Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with alminimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only incoming 100 Amp

32 Amp.tpn-3 nos. UPPWD schedule 2018 no.801 b cat outgoing B(2)

Labour Cess will be paid extra as per applicable

GST will be paid extra as per applicable