Greater Noida Industrial Development Authority Tender

Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 205w. The product family must have CE Certification. , DMX 512 compatibility and inclusive devices to run DMX 512 universe, IP66 connectors to connect the light in daisy chain. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product family should be compartmenatlised to have seperate optical and electrical block .

Supply, installation , testing & commissioning of round surface mounted flood light (IP66) with following specifications: 20-40Deg optics (Tolerence ±2 degree). 3000K with Lumen not less than 14000Lm , fixture shall be equiped with minimum IK06, IP66. Power Supply should be integral and should have 70% Efficiency with Power Factor of 0.9. Die cast alumunium housing & clear glass cover housing. Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 205w. The product family must have CE Certification. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product family should be compartmenatlised to have seperate optical and electrical block .

Supply, installation , testing & commissioning of round surface mounted flood light (IP66) with following specifications: 20°-30° optics (Tolerence ±2 degree), RGBW(4000K) with Lumen not less than 3950Lm , fixture shall be equiped with minimum IK06, IP66. Power Supply should be integral and should have 70% Efficiency with Power Factor of 0.9. Die cast alumunium housing & clear glass cover housing. Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 100w.

The product family must have CE Certification. , DMX 512 compatibility and inclusive devices to run DMX 512 universe, IP66 connectors to connect the light in daisy chain. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product family should be compartmenatlised to have seperate optical and electrical block.

Supply, installation , testing & commissioning of Surface mounted, 500-600mm long linear LED fixture (IP66) with following specifications: 15Deg optics (Tolerance ±2.5 degree), 3000K CCTwith Lumen not less than 1300Lm, fixture shall be equipped with minimum IK06, IP66. LED from CREE/NICHIA/LUMILED/OSRAM or equivalent or equivalent or equivalent. Power Supply should be non intergral part of the luminaire and should have 70% Efficiency with Power Factor of 0.9. Power supply should be of IP66 and placed in a suitable size of outdoor grade polycarbonate junction box with terminal block.

Input voltage 24V DC. The product should be Electrical Class III . The luminaire shall be loop in - loop out compatibility and should be intelikable with connecting cable of suitable size and IP66 5 pin/3/2 pin/ T connectors. Die cast alumunium housing & clear glass cover housing. Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 20W. The product family must have CE Certification. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product should have a option of Glare visor to be used if required as a standard option.

Supply, installation , testing & commissioning of Surface mounted, 1000mm - 1250mm long linear LED fixture (IP66) with following specifications: 15°-20° x 30°-40° optics (Tolerance ±2 degree x ±2 degree), 3000K CCT with Lumen not less than 3550Lm, fixture shall be equipped with minimum IK06, IP66. LED from CREE/NICHIA/LUMILED/OSRAM or equivalent or equivalent. Power Supply should be non intergral part of the luminaire and should have 70% Efficiency with Power Factor of 0.9. Power supply should be of IP66 and placed in a suitable size of outdoor grade polycarbonate junction box with terminal block. Input voltage 24V DC.

The luminaire shall be loop in - loop out compatibility and should be intelikable with connecting cable of suitable size and IP66 5 pin/3/2 pin/ T connectors. Die cast alumunium housing & clear glass cover housing. Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 45W. The product family must have CE Certification. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product should have a option of Glare visor to be used if required as a standard option

Supply, installation , testing & commissioning of Surface mounted, 500mm - 600mm long linear LED fixture (IP66) with following specifications: 15°-20° x 30°-40° optics (Tolerance ±2 degree x ±2 degree), 3000K CCT with Lumen not less than 1750Lm , fixture shall be equipped with minimum IK06, IP66. LED from CREE/NICHIA/LUMILED/OSRAM or equivalent or equivalent. Power Supply should be non intergral part of the luminaire and should have 70% Efficiency with Power Factor of 0.9. Power supply should be of IP66 and placed in a suitable size of outdoor grade polycarbonate junction box with terminal block.

Input voltage 24V DC.The product should be Electrical Class III . The product should be Electrical Class III. The luminaire shall be loop in - loop out compatibility and should be intelikable with connecting cable of suitable size and IP66 5 pin/3/2 pin/ T connectors. Die cast alumunium housing & clear glass cover housing. Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 25W. The product family must have CE Certification. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product should have a option of Glare visor to be used if required as a standard option .

Supply, installation , testing & commissioning of Surface mounted, 300mm - 350mm long linear LED fixture (IP66) with following specifications: 15°-20° x 30°-40° optics (Tolerance ±2 degree x ±2 degree), 3000K CCT with Lumen not less than 1100Lm, fixture shall be equipped with minimum IK06, IP66. LED from CREE/NICHIA/LUMILED/OSRAM or equivalent or equivalent. Power Supply should be non intergral part of the luminaire and should have 70% Efficiency with Power Factor of 0.9. Power supply should be of IP66 and placed in a suitable size of outdoor grade polycarbonate junction box with terminal block.

Input voltage 24V DC . The product should be Electrical Class III. The luminaire shall be loop in - loop out compatibility and should be intelikable with connecting cable of suitable size and IP66 5 pin/3/2 pin/ T connectors. Die cast alumunium housing & clear glass cover housing. Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 40W. The product family must have CE Certification. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product should have a option of Glare visor to be used if required as a standard option .

Supply, installation , testing & commissioning of Surface mounted, 1000mm - 1200mm long linear LED fixture (IP66) with following specifications: 15°-20° x 40°-55° optics (Tolerance ±2 degree x ±2 degree), 3000K CCT with Lumen not less than 1100Lm, fixture shall be equipped with minimum IK06, IP66. LED from CREE / NICHIA / LUMILED / OSRAM or equivalent or equivalent. Power Supply should be non intergral part of the luminaire and should have 70% Efficiency with Power Factor of 0.9. Power supply should be of IP66 and placed in a suitable size of outdoor grade polycarbonate junction box with terminal block.

Input voltage 24V DC . The product should be Electrical Class III. The luminaire shall be loop in - loop out compatibility and should be intelikable with connecting cable of suitable size and IP66 5 pin/3/2 pin/ T connectors. Die cast alumunium housing & clear glass cover housing. Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 20W. The product family must have CE Certification. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product should have a option of Glare visor to be used if required as a standard option

Supply, installation , testing & commissioning of Surface mounted, 1000mm - 1250mm long linear LED fixture (IP66) with following specifications: 15°-20° x 30°-40° optics (Tolerance ±2 degree x ±2 degree), RGBW (4000K) CCT with Lumen not less than 2150Lm, fixture shall be equipped with minimum IK06, IP66. LED from CREE/NICHIA/LUMILED/OSRAM or equivalent or equivalent.

Power Supply should be non intergral part of the luminaire and should have 70% Efficiency with Power Factor of 0.9. Power supply should be of IP66 and placed in a suitable size of outdoor grade polycarbonate junction box with terminal block. Input voltage 24V DC. The luminaire shall be loop in - loop out compatibility and should be intelikable with connecting cable of suitable size and IP66 5 pin/3/2 pin/ T connectors.

Die cast alumunium housing & clear glass cover housing. Luminaire should be BIS certified. Lumen maintenance of 70% at 50000 burning hours at 25 deg C. The power consumption of the prodcut should not be more than 39W. The product family must have CE Certification. The luminaire manufacturer shall provide optical performance, polar diagrams and photometric data in various formats including IES file format in accordance with IES LM- 79-08. The product should have a option of Glare visor to be used if required as a standard option

Centralised main server

A highperformance server for controlling large lighting projects with 3Mln pixels, with pre-installed softwares. As a central control unit, this versatile light control server orchestrates all devices and lights within a project. The server  has integrated digital dry contacts, two single-pole relay outputs and support for a wide range of Ethernet-based protocols.

Shows and light scenes can be controlled with the internal web server via mobile devices, web browsers or via cloud applications. A built-in status display on the front shows system and software messages. The server includes Microsoft® Windows 10™ IoT Enterprise and software licenses,  2 x mini DisplayPort to DVI-D adapter, 2 x mini DisplayPort to DisplayPort, 3 x IEC-C13 power cord (EU, US, and UK versions), Dry contact plug, 2 x relay interface plug, Input power supply 100- 240 V AC, 50/60Hz  

Operation & Maintenance For 5 Years

Installation Charge

Add labour cess @ 1% on all above items

Add 18% GST