Greater Noida Industrial Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Greater Noida Industrial Development Authority - GNIDA Tender
Civil And Construction
Pipe Line Project
Eprocure
Opening Date4 Feb 2025
Closing Date17 Feb 2025
Tender Amount₹ 3,08,02,202
Technical
Technical
Bid Capacity
... View More
The bid capacity required in the given tender can be determined by the cumulative turnover and liquid assets of the tenderer. The formulas for calculating the bid capacity are as follows: * For works more than 1.5 times the bid value up to Rs. 15.00 Lacs: 5% of the bid value
* For works more than 1.5 times the bid value up to Rs. 100.00 Lacs: 10% of the bid value
* For works more than 1.5 times the bid value up to Rs. 500.00 Lacs: 12% of the bid value
* For works Rs. 500.00 Lacs and above: 2.00 times the bid value, with 12% of the bid value as the liquid asset requirement. The cumulative turnover requirements are:
* Rs. 10.00 Lacs for works up to Rs. 15.00 Lacs
* Rs. 15.00 Lacs to Rs. 100.00 Lacs for works up to Rs. 100.00 Lacs
* Rs. 100.00 Lacs to Rs. 500.00 Lacs for works up to Rs. 500.00 Lacs
* Rs. 500.00 Lacs and above for works above Rs. 500.00 Lacs. The liquid asset requirements are:
* 5% of the bid value for works up to Rs. 15.00 Lacs
* 10% of the bid value for works up to Rs. 100.00 Lacs
* 12% of the bid value for works up to Rs. 500.00 Lacs and above. The bid capacity required in the given tender is as follows: 1. Works more than Rs.10.00 Lacs & upto Rs.15.00 Lacs: - Cumulative turnover: 1.5 Times bid value - Liquid assets: 5% of the bid value 2. Works more than Rs.15.00 Lacs & upto Rs.100.00 Lacs: - Cumulative turnover: 1.5 Times bid value - Liquid assets: 10% of the bid value 3. Works more than Rs.100.00 Lacs & upto Rs.500.00 Lacs: - Cumulative turnover: 1.5 Times bid value - Liquid assets: 12% of the bid value 4. Works Rs.500.00 Lacs and above: - Cumulative turnover: 2.00 times the bid value - Liquid assets: 12% of the bid value Alternatively, the bid capacity required can also be calculated using the Earnest Money deposit (EMD) and Security Money requirements, which are as follows:
- For work estimated to cost up to Rs. 10 crore: EMD = 2% of estimated cost
- For work estimated to cost more than Rs. 10 crore: EMD = Rs. 20 Lacs + 1% of (estimated cost - Rs. 10 crore)
- Security Money = 5% of Actual Cost of the work.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed works during the last 7 years. The experience requirements are as follows: - Three similar completed works costing not less than 40% of the estimated cost put to tender, - Two similar completed works costing not less than 60% of the estimated cost put to tender, - One similar completed work of aggregate cost not less than 80% of the estimated project cost put to tender.
Similar completed works mean commercial work of similar nature as the tender being asked for. The value and percentage of similar works completed are also mentioned in terms of the estimated cost put to tender, with specific percentages such as 40%, 60%, and 80%. Additionally, the bidder should have a cumulative turnover and liquid assets, with liquid assets being 5%, 10%, or 12% of the bid value, depending on the bid value. The cumulative turnover should be more than 1.5 times the bid value for works up to Rs.500.00 Lacs, with a minimum of Rs.10.00 Lacs, Rs.15.00 Lacs, or Rs.100.00 Lacs, and 2.00 times the bid value for works of Rs.500.00 Lacs and above.
Costs
EMD
₹ 6,17,000Document Cost
₹ 4,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_GNIDA_1001604_5Bid Award Id
ViewTender No
SM/(E-TENDER CELL)/2025/563 DATED- 31.01.2025Tender Authority
Greater Noida Industrial Development Authority ViewPurchaser Address
-Website
http://https://www.greaternoidaauthority.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing and Laying, size of finolex makes PVC pipes 6kg/Cm2 with required PVC standard special confirming to IS codes with latest amendment and lowering the same trenches and laying true to alignment and gradient complete i/c the cost of cutting of pipes for making up to lenght and making joints i/c cost of socket, platochem PV-85 pvc solvent cement complete. PVC Pipe must be confirming to IS: 1985-2000 with latest amendment. make-Finolex industries Ltd. Supremeindustries Ltd (Rate as per comparative statement per Rm. N.S.I NO. 1.3.00)
-
-
-
... More
90mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 209.10-1.12% Less- 184.008
2100
186
392049
... More
110mm dia with coupler @6kgf/Cm2 pressure b with i/c all PVC standard Specials @ 298.2-1.12% Less-262.416
1950
266
519187.5
... More
140mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 492.9-1.12% Less 433.752
1200
440
528108
... More
160mm dia with coupler @6kgf/Cm2 pressure with i/c all PVC standard Specials @ 611.1-1.12% Less- 537.768
1050
545
572901
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber inserting etc. complete (the tail pieces, tapers etc. if required will be paid seperately) : (DSR-18/18.59.2)
-
-
-
... More
80 mm dia
27
5385
145395
... More
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329: 300 mm dia Ductile Iron Class K-7 pipes. Rate As Per NSI.
-
-
-
... More
200mm dia Ductile Iron Class K-7 Pipes @ 2978.60
525
2978
1563765
... More
250 mm dia Ductile Iron Class K-7 pipes. @ 3922.85
300
3922
1176855
... More
300 mm día Ductile Iron Class K-7 pipes. @ 5012.08
450
5012
2255436
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately)
(Rate As Per NSI)
-
-
-
... More
150mm dia sluice valve (Kirlosker/IVC Make) @ 24073.60
30
21494
644828.4
... More
200mm dia sluice valve (Kirlosker/IVC Make) @ 42038.9
12
37534
450416.76
... More
250mm dia sluice valve (Kirlosker/IVC Make) @ 54867.2
6
48988
293931.42
... More
300mm dia sluice valve (Kirlosker/IVC Make) @ 78362.6
9
69966
629699.4
... More
350mm dia sluice valve (kirlosker/IVC Make)
9
115415
1038738.15
... More
450mm dia sluice valve (kirlosker/IVC Make)
6
195829
1174977.3
... More
600mm dia sluice valve (kirlosker/IVC Make)
3
307288
921866.79
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (Sail Steel)
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
DSR-18/10.25.2
10500
88
929355
... More
Supply and Installation of required size steel pipe 10mm thick conforming to IS 3589 through trenchless excavation of thrust pit and reciving pit required size and the excavation & filling back & compaction complete as per specification for road crossing by Auger boring method. Pipe will be installed at depth beyond 3m below the ground surface in downward required slope. N.S.I
-
-
-
... More
200mm dia @ 8820-1.12% Less=7761.6
45
7875
354375
... More
Item No. 54: Analysis of Rates for laying of 90mm dia. DWC (Double wall corrugated) Pipe across the road by Trenchless method. (Manual) Rate As per GNIDA
-
-
-
... More
120mm dia Trenchless method With Pipe Rate 796/- and without Pipe Rate 550/- (Manual) Rate as per electrical (GNIDA)
600
550
330000
... More
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1) cement: 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm. top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand 4graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement 5 fine sand: 10graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: With common burnt clay F.P.S.(non modular) bricks of class 7.5. designation DSR-18/36.1
-
-
-
... More
With common burnt clay F.P.S.(non modular)
bricks of class designation 7.5
45
6723
302544
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1) cement: 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1cement 2 coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1cement 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design: DSR-18/34.1
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
30
11504
345131.4
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.0m spacing this includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 15,20,25,32,40,50 mm nominal outer dia Pipes. Rate As Per (DSR- 2018)
-
-
-
... More
15 mm nominal outer dia pipes (DSR-18/18.7.1)
6000
146
877140
... More
20 mm nominal outer dia pipes (DSR-18/18.7.2)
450
196
88501.5
... More
25 mm nominal outer dia pipes (DSR-18/18.7.3)
300
250
75219
... More
32 mm nominal outer dia pipes (DSR-18/18.7.4)
150
339
50890.5
... More
40 mm nominal outer dia pipes (DSR-18/18.7.5)
150
463
69574.5
... More
50 mm nominal outer dia pipes (DSR-18/18.7.6)
150
685
102766.5
... More
Providing and Fixing brass ferrule with C.I mouth cover including boring and tapping the main:-
-
-
-
... More
15 mm nominal bore (DSR-18/18.20.1)
1800
256
461214
... More
20 mm nominal bore (DSR-18/18.20.2)
120
295
35455.2
... More
25 mm nominal bore (DSR-18/18.20.3)
120
380
45667.2
... More
Providing and Fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (new work).
-
-
-
... More
15 mm nominal bore(DSR-18/18.46.1)
300
128
38553
... More
20 mm nominal bore (DSR-18/18.46.2)
120
150
18069.6
... More
25 mm nominal bore (DSR-18/18.46.3)
120
219
26293.2
... More
Cutting existing PVC Water main pipe line following nominal dia inserting special and fitting bailing or pumping out water cartage of required materials returning the scrap to site store etc. complete including the cost of insertion pipe ( upto 1.00m) special also including making joint for repair of leakage and baring out the existing main benders as well as subsequent and all type of labour T&P etc. complete for proper completion of work after repairing the leakage the site should be neatly dressed.(AR/GNIDA)
-
-
-
... More
90mm dia.
4500
1052
4735665
... More
110mm dia.
1800
1105
1990638
... More
160mm dia.
900
1394
1254870
... More
Cutting existing leakage 150mm to 500mm dia S&S or flanged C.I running Water main specials or fitting baliling or pumping out water cartage of required materials the scrap to site store etc. complete including the inserction pipe and special also i/c making joint for repair of leakage and baring out the existing main bends as well as subsequent back fill including testing and all type of labour T&P etc. complete after repairing the leakage the site should be neatly dressed C.I pipe and specials paid in separately item (AR/GNIDA)
-
-
-
... More
150 mm dia
120
2506
300775.2
... More
200 mm dia
120
2882
345855.6
... More
250 mm dia
120
3955
474606
... More
300 mm dia
165
5402
891433.95
... More
400 mm dia
120
9151
1098157.2
... More
500 mm dia
90
16304
1467360.9
... More
Repairing of C.I. Sluice valve with Joint, Nut bolts, packing, change of gun metal sleeves, change of spindle and cartage T&P etc. complete as per respect & direction of Engineer-in charge. AR/GNIDA.
-
-
-
... More
150 mm dia
15
2692
40392
... More
200 mm dia
15
3292
49392.9
... More
250 mm dia
15
6139
92099.1
... More
300 mm dia
15
7573
113602.5
... More
400 mm dia
15
16514
247716.45
... More
450 mm dia
15
19670
295050.9
... More
500 mm dia
6
20932
125593.86
... More
600 mm dia
6
30883
185298.3
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in-charge.DSR-18/15.2.1
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
112.5
923
103884.75
... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) DSR-18/15.2.2
75
569
42693.75
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-IN-Charge (DSR-18/15.3)
112.5
1347
151555.5
... More
Labour Cess and GST will be paid extra as per govt. orders
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements