Greater Noida Industrial Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Greater Noida Industrial Development Authority - GNIDA Tender
Other Consultancy Services
Consultancy Services
Eprocure
Opening Date5 Oct 2021
Closing Date3 Nov 2021
Tender AmountRefer Documents
Costs
EMD
₹ 13,11,000Document Cost
₹ 6,770Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_GNIDA_626277_27Bid Award Id
ViewTender No
GM/PROJECT/2021/289 DATED 29.09.2021Tender Authority
Greater Noida Industrial Development Authority ViewPurchaser Address
-Website
http://https://www.greaternoidaauthority.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing brick work manually / by mechanical means including stacking of
serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.
-
-
-
... More
In mud mortar.(DSR-13/15.7.1)
154.88
-
233.2
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
10469.28
-
109.26
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
10370.61
-
54.03
... More
Carriage/disposal of earth/material by mechanical transport including loading, unloading and stacking. (AR/GNIDA). Earth:
-
-
-
... More
All leads
98.66
-
87.94
... More
Providing, laying, jointing and testing of PVC pipe (Finolex make ring fit) of following dia 6Kg/Cm2 including all specials & fittings etc. as required for proper completion of work (The contractor has to arrange the source of water and require head for testing). (AR/GNIDA)
-
-
-
... More
90 mm dia (O.D.)
11944
-
232.49
... More
110 mm dia (O.D.)
1036
-
333.43
... More
140mm dia (O.D.)
698
-
645.38
... More
160mm dia (O.D.)
58
-
687.57
... More
200mm dia (O.D.)
31
-
1082.15
... More
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately).
-
-
-
... More
80mm dia (AR/GNIDA).
2
-
2725.63
... More
100mm dia (DSR-13/18.31.1.2)
3
-
3895.6
... More
150mm dia class-II (DSR-13/18.31.3.2)
2
-
5659.4
... More
200mm dia class-II (DSR-13/18.31.4.2)
2
-
11529
... More
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc. if required will be paid separately):
-
-
-
... More
100 mm dia (DSR-13/18.59.3/P-329)
2
-
8103.2
... More
Constructing masonry chamber 60x60x75 cm. inside, in bricks work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design:
-
-
-
... More
With bricks of class designation-150 (DSR-13/18.33.1/P-324)
7
-
6441.05
... More
Constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1: 3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design.
-
-
-
... More
With common burnt clay F.P.S. (non modular ) bricks of class designation 7.5.
4
-
11128.55
... More
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main:
-
-
-
... More
15 mm nominal bore (DSR-13/18.20.1/P-322)
225
-
242.2
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work :
-
-
-
... More
15 mm dia nominal bore. (DSR-13/18.12.1/P-320)
225
-
156.6
... More
Providing and fixing G.I. union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).
-
-
-
... More
15 mm nominal bore (DSR-13/18.46.1/P-327)
225
-
155.65
... More
Providing and laying 80mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (AR/GNIDA)
11114.39
-
873
... More
Maintanance of tube well
-
-
-
... More
Maintenance of water supply tube well in Urban area of Greater Noida including re-winding of submersible pump motor from 15 H.P. to 25 H.P. (Including lowering & lifting of motor) including labour, T & P and material complete in all repect. (Total Nos of Tubewells-2 Nos)
1
-
19289
... More
Supply and replacement of Bush
2
-
980
... More
Supply and replacment of Thrust Plate
2
-
1903
... More
Supply and replacement of impelier
2
-
1456
... More
Supply and replacement of Difuse
2
-
1680
... More
Supply and replacement of shaft
1
-
2240
... More
Supply and replacement of Relay (Over Load Relay)
1
-
6283
... More
Supply and replacement of Connector ML 3
1
-
6961
... More
Supply and replacement of Connector ML 4
1
-
11386
... More
Supply an dreplacement of 3 phase 100 Amp MCCB L & T Make
2
-
3465
... More
Supply and fixing submersible pump set 25 HP L & T make (M.R.)
1
-
59873
... More
Providing and fixing C.I sluice valve (with cap complete with bolts, nuts, rubber insertions etc. (the tall pieces if required will be paid separately).
-
-
-
... More
150 mm diameter Class-II (DSR-13/18.31. 3.2/P-324)
1
-
5659.4
... More
Wages for Operators for Operation of Tube wells for water supply (For each tubewell Operators in A and B shift)
43
-
20808.52
... More
Carriage of 600/350 PSI Air Compressor by breakdown service upto site of work (12% GST included in the rate)
12
-
64.96
... More
Carriage of 600/350 PSI Air Compressor and T & P (12% GST included in the rate)
12
-
38.08
... More
Loading & uploading T & P (12% GST included in the rate)
1
-
1520.96
... More
Carraige of 3 cusec capacity O. P Unit by bereak down service upto site of work (12% GST included in the rate)
12
-
64.96
... More
Carriage of O.P. Unit T & P upto site of work (12% GST included in the rate)
12
-
38.08
... More
Loading & unloading T & P (12% GST included in the rate)
1
-
1520.96
... More
1.6 mm to 4.8mm Lal Qua/Chandigarh Pea Gravel screened and washed with stacking 9Rate are excluding taxes) (12% GST included in the rate)
10
-
5432
... More
Erection of Air Compressor & Camp equipage (12% GST included in the rate)
1
-
11200
... More
Development of Tube-well Air Compressor (12% GST included in the rate)
24
-
4956
... More
After completion of work dismantling of compressor with T & P (12% GST included in the rate)
1
-
5600
... More
Erection of Air Compressor & Camp equipage (12% GST included in the rate)
1
-
18020.8
... More
Development of Tube-well (12% GST included in the rate)
35
-
1131.2
... More
After copletion of work dismantling of O.P. Unit (12% GST included in the rate)
1
-
9010.4
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.1.2/P-111)
3
-
4646.5
... More
Supply and fixing submersible pump set 50 m3/hr with 20 m head ( operating range + 10% - 25 %) with static head 15 m duty point head 30 m With standard make (M.R.) 1 W+ 1 S
1
-
59873
... More
Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter. All these equipments shall be housed by panel box made out from 60 gauge CRCA Sheet with powder coating with wall mounting duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The operation of panel should be suitable for on 440 Volt AC Supply.
1
-
113750
... More
New Tubewell
-
-
-
... More
Boring/drilling bore well of required dia for casing/stainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore leg, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.
All types of soil
-
-
-
... More
400mm dia (DSR-13/24.1.1.3/P-396)
90
-
557.55
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
200mm nominal size dia (DSR-13/24.3.3/P-396)
16
-
878.25
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticised PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.
-
-
-
... More
200mm nominal size dia (DSR-13/24.4.3/P-396-397)
18
-
820.45
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. (DSR-13/24.8/P-397)
7
-
976.6
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed / plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge
-
-
-
... More
200 mm nominal size dia (DSR-13/24.11/P-398)
90
-
1711.25
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (DSR-13/24.12/P-398)
16
-
614.75
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for bore well of:
-
-
-
... More
200mm dia (DSR-13/24.13.3/P-398)
1
-
243.9
... More
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (Part I), including necessary bolts & nuts of required size complete.
-
-
-
... More
200mm dia (DSR-13/24.14.3/P-398)
1
-
1310.15
... More
Providing and fixing Bail plug/bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS: 2800 (part I)
-
-
-
... More
200mm dia (DSR-13/24.15.3/P-398)
1
-
265.1
... More
Supply and fixing submersible pump set 50 m3/hr with 20 m head ( operating range + 10% - 25 %) with static head 15 m duty point head 30 m With standard make (M.R.) 1 W+ 1 S
1
-
59873
... More
Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter. All these equipments shall be housed by panel box made out from 60 gauge CRCA Sheet with powder coating with wall mounting duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The operation of panel should be suitable for on 440 Volt AC Supply.
1
-
113750
... More
Renovation Existing pump house Building
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
5
-
109.26
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
2
-
3920.65
... More
Brick work with bricks of class designation-150 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.2.2/P-111)
1
-
4170.75
... More
Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) of class designation 150, conforming to IS: 12894, in superstructure above plinth and upto floor V level.
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR-13/6.45.2/P-114)
5
-
641.3
... More
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of 1:4 cement mortar 1:4 (1 cement : 4 coarse sand).
-
-
-
... More
25mm thick. (DSR-13/11.26.1/P-190)
37
-
1071.7
... More
Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR-13/11.27/P-190)
3
-
1100.85
... More
Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR-13/12.22/P-206)
2
-
167.45
... More
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110mm diameter (DSR-13/12.41.2/P-209)
8
-
218.6
... More
Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler, 110 mm (DSR-13/12.42.1.2)
2
-
133.55
... More
110 mm bend. (DSR-13/12.42.5.2)
4
-
160.25
... More
110 mm Shoe. (DSR-13/12.46.6.2)
2
-
290
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR-13/13.41.1/P-225)
112
-
79.65
... More
Finishing walls with textured exterior paint of required shade: New work (two or more coats applied @ 3.28 Ltr./10 Sqm) over and including primer coat of exterior primer applied @ 2.20kg/10 Sqm.(DSR-13/13.45.1/P-225)
84
-
127.1
... More
Painting steel work with Deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 Ltr./10 sqm over an under coat of primer applied @ 0.80 Ltr/ 10 Sqm of approved brand or manufacture. (DSR-13/13.48.3/P-226)
11
-
80.6
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
11
-
24.95
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
196
-
85.4
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead:
-
-
-
... More
With cement mortar 1:4 (1 cement : 4 fine sand) (DSR-13/14.1.1/P-237)
93
-
221.15
... More
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska:
-
-
-
... More
With M-150 brick tiles (DSR-13/14.18.1/P-238)
37
-
52.2
... More
Renovation Pump House Building Electrical work
-
-
-
... More
Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable and 1.5 Sqmm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.
-
-
-
... More
Group-A [DSR(E&M)-2013/1.15.1/P-3]
3
-
272
... More
Group-B [DSR(E&M)-2013/1.15.2/P-3]
1
-
312
... More
Group-C [DSR(E&M)-2013/1.15.3/P-3]
3
-
428
... More
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps switch [DSR(E&M)-2013/1.24.1/P-6]
3
-
77
... More
15/16 amp switch [DSR(E&M)-2013/1.24.3/P-6]
1
-
114
... More
3 pin 5/6 amp socket outlet [DSR(E&M)-2013/1.24.4/P-6]
1
-
101
... More
6 pin 15/16 amp socket outlet
[DSR(E&M)-2013/1.24.5/P-6]
1
-
163
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (DSR(E&M)-2013/1.25/P-6)
3
-
362
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. [DSR(E&M)-2013/1.26/P-6]
2
-
23
... More
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
4 Module (125mmx75mm) [DSR(E&M)-2013/1.27.3/P-6]
1
-
197
... More
6 Module (200mmx75mm) [DSR(E&M)-2013/1.27.4/P-6]
1
-
241
... More
Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
... More
4 Module (DSR(E&M)-2013/1.28.3/P-6)
1
-
91
... More
6 Module (DSR(E&M)-2013/1.28.4/P-6)
1
-
109
... More
Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required. (DSR(E&M)-2019/1.59)
1
-
221
... More
Sub Head-II : Distribution Board
-
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps [DSR(E&M)-2013/2.12.1/P-12]
1
-
267
... More
63 amps [DSR(E&M)-2013/2.12.2/P-12]
1
-
330
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole [DSR(E&M)-2013/2.10.1/P-12]
1
-
146
... More
SUB-HEAD - III : INTERNAL WIRING
-
-
-
... More
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.
-
-
-
... More
2x2.5 Sqmm + 1x2.5 Sqmm earth wire [DSR(E&M)-2013/1.14.2/P-3]
25
-
140
... More
2x4 Sqmm + 1x4 Sqmm earth wire [DSR(E&M)-2013/1.14.3/P-3]
10
-
171
... More
4x10 Sqmm + 2x10 Sqmm earth wire [DSR(E&M)-2013/1.14.10/P-3]
8
-
575
... More
Sub Head-IV : Fans & Light Fixtures
-
-
-
... More
Supplying, fixing, testing and commissioning of following size exhaust/ fresh air fan complete with gravity louver and connection with 3 core flexible wire as required.
-
-
-
... More
a) 300mm 1400 RPM Heavy duty Metal exhaust fan Havells make model: Turbo Force SP or equivalent preferred makes.
1
-
2850
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25mm [DSR(E&M)-2013/1.21.2/P-5]
8
-
72
... More
Supplying, fixing, testing and commissioning of Surface mounted luminaire for 20W LED Tube light with extruded thermal polycarbonate housing fixture should be of minimum 2000 lumens (6500 KELVIN) suitable for operation on 230 volt 50 Hz,Single Phase AC supply with electronic driver and all accessories complete for ceiling/wall/ Surface including wiring, connection with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including earthing etc. as required. Similar to Wipro Make, Cat No: LL20-221-XXX-65AL1 or equivalent preferred make. (NS-EL-41)
4
-
893
... More
Sub Head-V : Earthing
-
-
-
... More
Earthing with G.I. earth plate 600mmx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required. [(DSR(E&M)-2013/5.4/P-22)]
1
-
4367
... More
Supply and laying 25mmx5mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) [DSR(E&M)-2013/5.9/P-22]
5
-
103
... More
Providing & fixing 25mm x 5mm G.I. strip on surface or in recess for connections etc. as required. [DSR(E&M)-2013/5.15/P-23]
1
-
133
... More
New Construction Pump House Building
-
-
-
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depression as per MORTH. (A.R./GNIDA) All kinds of soil.
-
-
-
... More
Lead upto 50M and lift upto 1.50M
19
-
71.09
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
12
-
54.03
... More
Extra for every additional lift of 1.5m or part thereof in excavation/banking excavated or stacked materials.
-
-
-
... More
All kinds of soil. (DSR-13/2.26.1/P-75)
7
-
34.85
... More
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. (DSR-13/2.27/P-75)
3
-
843.65
... More
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/Lindane emulsifiable concentrate of 20%. (DSR-13/2.34.1/P-76)
22
-
185.95
... More
Diluting and injecting chemical emulsion for POST-Constructional anti- termite treatment (excluding the cost of chemical emulsion):
-
-
-
... More
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litre per linear metre including drilling and plugging holes etc. With chlorphyriphos/Lindane E.C. 20% with 1% concentration. (DSR-13/2.35.2.1/P-76)
16
-
20.9
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. (DSR-13/2.35.3.1/P-76)
27
-
107.85
... More
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. (DSR-13/2.35.4.1/P-76)
16
-
16
... More
Treatment at points of contact of wood work by chemical emulsion chlorpyriphos/Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (DSR-13/2.35.5/P-76)
16
-
187.65
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
4
-
3920.65
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) (DSR-13/4.10/P-87)
4
-
220.6
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. (DSR-13/4.12/P-87)
1
-
44.36
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg. per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. (DSR-13/4.13/P-87)
4
-
108.75
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. (DSR-13/4.17/P-88)
12
-
378.95
... More
Reinforced Cement Concrete work
-
-
-
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
10
-
186.4
... More
Suspended floors, roofs, landings, balconies and access platform. (DSR-13/5.9.3/P-97)
27
-
371.8
... More
Shelves (cast in situ) (DSR-13/5.9.4/P-97)
5
-
371.8
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers. (DSR-13/5.9.5/P-97)
22
-
309.8
... More
Columns, pillars, piers, abutments, posts and struts. (DSR-13/5.9.6/P-97)
20
-
423
... More
Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like. (DSR-13/5.9.15/P-97)
1
-
186.4
... More
Weather shade, Chajjas, corbels etc., including edges. (DSR-13/5.9.19/P-97)
2
-
468.2
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
769
-
66.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-mechanically treated bars (DSR-13/5.22A.6/P-99)
855
-
66.5
... More
Providing and laying in position machine batched, machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportion as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note: Cement content considered in this item is @ 330 Kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
-
-
-
... More
All works upto plinth level. (DSR-13/5.33.1/P-101)
9
-
5704.45
... More
All works above plinth level upto floor V level. (DSR-13/5.33.2/P-101)
8
-
6353
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.1.2/P-111)
0.93
-
4646.5
... More
Brick work with bricks of class designation 150 in superstructure above plinth level upto floor V level in all shapes and sizes in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.4.2/P-111)
10
-
5325.1
... More
Half brick masonry with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand). (DSR-13/6.12.2/P-112)
10
-
574.7
... More
Brick work with clay flyash brick of class designation 150 in superstructure above plinth level up to floor five level in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.32.2/P-114)
8
-
5183.9
... More
wood & UPVC work
-
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete:
-
-
-
... More
300x16mm (DSR-13/9.96.1/P-159)
1
-
215.3
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
-
-
-
... More
300x10mm (DSR-13/9.97.1/P-159)
1
-
108.1
... More
100x10mm (DSR-13/9.97.5/P-159)
2
-
49.85
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:
-
-
-
... More
100 mm (DSR-13/9.100.2/P-160)
2
-
52.8
... More
Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR-13/9.102/P-160)
2
-
68.4
... More
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
... More
Using M.S. angles 40x40x6 mm for diagonal braces. (DSR-13/10.5.1/P-177)
3
-
2942
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
-
-
-
... More
40mm thick with 20mm nominal size stone aggregate (DSR-13/11.3.1/P-186)
23
-
316.8
... More
Providing gola 75x75mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design:
-
-
-
... More
In 75x75mm deep chase (DSR-13/12.21.1/P-206)
16
-
127.95
... More
Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR-13/12.22/P-206)
1
-
167.45
... More
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110mm diameter (DSR-13/12.41.2/P-209)
8
-
218.6
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion.
-
-
-
... More
Coupler: 110 mm (DSR-13/12.42.1.2/P-209)
1
-
133.55
... More
Bend 87.50 : 110 mm bend (DSR-13/12.42.5.2/P-209)
2
-
160.25
... More
Shoe (Plain): 110 mm shoe (DSR-13/12.42.6.2/P-209)
1
-
290.35
... More
12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand) (DSR-13/13.1.2/P-222)
27
-
133.85
... More
15mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement : 6 coarse sand) (DSR-13/13.5.2/P-222)
27
-
164.75
... More
20mm cement plaster of mix: 1:4 (1 cement : 4 coarse sand) (DSR-13/13.6.1/P-222)
57
-
215.8
... More
6mm cement plaster of mix: 1:3 (1 cement : 3 fine sand) (DSR-13/13.16.1/P-223)
23
-
120.35
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR-13/13.41.1/P-225)
78
-
79.65
... More
Finishing walls with textured exterior paint of required shade: New work (two or more coats applied @ 3.28 Ltr./10 Sqm) over and including primer coat of exterior primer applied @ 2.20kg/10 Sqm.(DSR-13/13.45.1/P-225)
57
-
127.1
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
135
-
85.4
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately):
-
-
-
... More
For fixed portion: Powder coated aluminium (minimum thickness of powder coating 50 micron) (DSR-13/21.1.1.2/P-371)
23
-
373
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately): Powder coated aluminium (minimum thickness of powder coating 50 micron). (DSR-13/21.1.2.2/P-371)
19
-
427.6
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 4.0 mm thickness. (DSR-13/21.3.1/P-371-372)
1.8
-
790
... More
Filling the gap in between aluminium frame & adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge compete. Upto 5mm depth and 5 mm width. (DSR-13/21.8.1/P-373)
6
-
83.05
... More
Providing and laying integral cement based waterproofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations:
-
-
-
... More
(a) Applying a slurry coat of neat cement using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.
-
-
-
... More
(b) Laying brick bats with mortar using broken bricks/brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.
-
-
-
... More
(c) After two days of proper curing applying a second coat of cement slurry using 2.75Kg/Sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge.
-
-
-
... More
(d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300mm square 3mm deep.
-
-
-
... More
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-charge:
-
-
-
... More
With average thickness of 120mm and minimum thickness at khurra as 65mm. (DSR-13/22.7.1/P-380-381)
27
-
882.6
... More
New Construction Pump House Building Electrical work
-
-
-
... More
Sub Head-I : Wiring
-
-
-
... More
Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable and 1.5 Sqmm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.
-
-
-
... More
Group-A [DSR(E&M)-2013/1.15.1/P-3]
3
-
272
... More
Group-B [DSR(E&M)-2013/1.15.2/P-3]
1
-
312
... More
Group-C [DSR(E&M)-2013/1.15.3/P-3]
3
-
428
... More
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps switch [DSR(E&M)-2013/1.24.1/P-6]
3
-
77
... More
15/16 amp switch [DSR(E&M)-2013/1.24.3/P-6]
1
-
114
... More
3 pin 5/6 amp socket outlet [DSR(E&M)-2013/1.24.4/P-6]
1
-
101
... More
6 pin 15/16 amp socket outlet [DSR(E&M)-2013/1.24.5/P-6]
1
-
163
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (DSR(E&M)-2013/1.25/P-6)
3
-
362
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. [DSR(E&M)-2013/1.26/P-6]
2
-
23
... More
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
4 Module (125mmx75mm) [DSR(E&M)-2013/1.27.3/P-6]
1
-
197
... More
6 Module (200mmx75mm) [DSR(E&M)-2013/1.27.4/P-6]
1
-
241
... More
Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
... More
4 Module (DSR(E&M)-2013/1.28.3/P-6)
1
-
91
... More
6 Module (DSR(E&M)-2013/1.28.4/P-6)
1
-
109
... More
Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required. (DSR(E&M)-2019/1.59)
1
-
221
... More
Sub Head-II : Distribution Board
-
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps [DSR(E&M)-2013/2.12.1/P-12]
1
-
267
... More
63 amps [DSR(E&M)-2013/2.12.2/P-12]
1
-
330
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole [DSR(E&M)-2013/2.10.1/P-12]
1
-
146
... More
SUB-HEAD - III : INTERNAL WIRING
-
-
-
... More
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.
-
-
-
... More
2x2.5 Sqmm + 1x2.5 Sqmm earth wire [DSR(E&M)-2013/1.14.2/P-3]
25
-
140
... More
2x4 Sqmm + 1x4 Sqmm earth wire [DSR(E&M)-2013/1.14.3/P-3]
10
-
171
... More
4x10 Sqmm + 2x10 Sqmm earth wire [DSR(E&M)-2013/1.14.10/P-3]
8
-
575
... More
Sub Head-III : Fans & Light Fixtures
-
-
-
... More
Supplying, fixing, testing and commissioning of following size exhaust/ fresh air fan complete with gravity louver and connection with 3 core flexible wire as required.
-
-
-
... More
a) 300mm 1400 RPM Heavy duty Metal exhaust fan Havells make model: Turbo Force SP or equivalent preferred makes.
1
-
2850
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25mm [DSR(E&M)-2013/1.21.2/P-5]
8
-
72
... More
Supplying, fixing, testing and commissioning of Surface mounted luminaire for 20W LED Tube light with extruded thermal polycarbonate housing fixture should be of minimum 2000 lumens (6500 KELVIN) suitable for operation on 230 volt 50 Hz,Single Phase AC supply with electronic driver and all accessories complete for ceiling/wall/ Surface including wiring, connection with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including earthing etc. as required. Similar to Wipro Make, Cat No: LL20-221-XXX-65AL1 or equivalent preferred make. (NS-EL-41)
4
-
893
... More
Sub Head-IV : Earthing
-
-
-
... More
Earthing with G.I. earth plate 600mmx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required. [(DSR(E&M)-2013/5.4/P-22)]
1
-
4367
... More
Supply and laying 25mmx5mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) [DSR(E&M)-2013/5.9/P-22]
5
-
103
... More
Providing & fixing 25mm x 5mm G.I. strip on surface or in recess for connections etc. as required. [DSR(E&M)-2013/5.15/P-23]
1
-
133
... More
Sewerage work
-
-
-
... More
Temporary/Permanent plugging and blocking of sewer line, branch connection and divaraion of flows and removal of all plugs etc. Providing everything else required for divaraion of flow by pumping and to maintain the sewerage system functioning normal and managing the flow without any surcharging overflows etc. loosen, de-silt and thoroughly clean and remove debris and objects such s boulders, bricks etc. bacteriological slimes roots, encrustations, grease, carbonated deposits, etc. from the sewer line including disposal of silt/ debris/ malwa/ objects etc. including solidification of silt/ debris/ malwa/ objects etc.,
-
-
-
... More
four disposal to the damping sites as per the direction of Engineer-in-charge within the Municipal limits including all safety precautions such as temporary barricading lighting display caution boards, and safety precautions and using necessary safety equipment like gas detector rescue winch, overalls, boots land globes, face mask, air compreller and glober, exhaust fan, DC torches, oxygen cylinder, and mask etc., it will be mandatory that with out safety equipments no labour is allowed to work. All labours and machinery should be sufficiently insured for any accident or loss of life and it will be mandatory to follow NGT norms, before the work started photographic, survey should be done and after the work done the photograph and video graphy are mandatory. (AR/GNIDA)
-
-
-
... More
250 mm dia
8634
-
188.7
... More
Hire charges of Pumps set of capacity 4000 litres/hour
(DSR-13/Code No. 0011/P-3)
315
-
550
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.
-
-
-
... More
EHD - 35: Circular shape 560 mm internal dia. (DSR-13/19.19.4.1/P-354)
152
-
1637.2
... More
Making connection of drain or sewer line with existing manhole including breaking into & making good the walls, floors with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement & making necessary channels for the drain etc. complete:
-
-
-
... More
For pipes 100 to 250 mm dia (DSR-13/19.21.1/P-354-355)
121
-
330.5
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
5825.48
-
109.26
... More
Depth from 1.5 to 3.0 M below G.L.
4734.35
-
136.26
... More
Depth from 3.0 to 4.5 M below G.L.
1598.07
-
170.45
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
11960.89
-
54.03
... More
Supply of ISI marked RCC S&S NP-3 pipes of following size including carting, loading, unloading at godown including all taxes and levies & rubber rings. (AR/GNIDA)
-
-
-
... More
250 mm dia NP-3 pipe
4569
-
347.48
... More
Laying of NP-3 RCC S&S pipes jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 coarse sand) including testing of joints etc. complete. (AR/GNIDA)
-
-
-
... More
250 mm dia NP-3 pipe
4569
-
99.43
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-3 pipe of following diameter including centring shuttering but excluding excavation. (AR/GNIDA)
-
-
-
... More
250mm dia NP-3 concrete cradle
4569
-
270
... More
Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design:
-
-
-
... More
0.91m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal dia meter conforming to IS 12592, total weight of cover and frame not less than 182 Kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centring, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately):
-
-
-
... More
With bricks of class designation-150 (DSR-13/19.9.1.1/P-352)
91
-
8241.55
... More
Constructing brick masonry circular type manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, all complete as per standard design:
-
-
-
... More
1.68m deep with SFRC cover and frame (heavy duty, HD-20 grade designation) 560mm internal dia meter conforming to IS 12592, total weight of cover and frame not less than 182 Kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centring, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately):
-
-
-
... More
With bricks of class designation-150 (DSR-13/19.11.1.1/P-352-353)
61
-
15524.4
... More
Supply of ISI marked R.C.C. NP-2 pipes of following sizes including carting, loading, unloading, at godown, including all taxes and levies & rubber rings.
-
-
-
... More
150mm dia NP-2 Pipe
482
-
217.7
... More
Providing and laying in position cement concrete 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) in concrete cradle under NP- 2 pipe of following diameter including centring shuttering but excluding excavation as per approved drawing .
-
-
-
... More
150mm dia NP-2 Cocrete cradle
482
-
110.9
... More
Laying NP - 2 R.C.C. S&S pipes jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete:
-
-
-
... More
150mm dia NP-2 Pipe
482
-
46.19
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
182.76
-
3920.65
... More
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (including equivalent design mix). (DSR-13/15.2.1/P-248)
2806
-
806.35
... More
Road restoration
-
-
-
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depression as per MORTH. (A.R./GNIDA) All kinds of soil.
-
-
-
... More
Lead upto 50M and lift upto 1.50M
2525.4
-
71.09
... More
Carriage/disposal of earth/material by mechanical transport including loading, unloading and stacking. (AR/GNIDA). Earth:
-
-
-
... More
Lead upto 2.0 Km.
2525.4
-
59.9
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/4.3.1)
3928.4
-
186.4
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size). (DSR-13/4.1.10/P-85)
841.4
-
3672.8
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (DSR-13/16.75/P-275)
Note: Cement content considered in this item is @ 330Kg/Cum. Excess/less cement used as per design mix is payable/recoverable separately.
1262.7
-
6248
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete. (DSR-13/16.44/P-268)
2200
-
46.45
... More
Drainage work
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. (MORTH/A.R./GNIDA)
-
-
-
... More
All kinds of soil.
1703.98
-
109.26
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
223.55
-
3920.65
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). (DSR-13/5.1.2/P-96)
500.04
-
5552.25
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
39252.75
-
66.5
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
745.29
-
186.4
... More
Wall (any thickness) including attached pilasters, buttresses, plinth and string courses etc. (DSR-13/5.9.2/P-97)
3784.6
-
334.5
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
680
-
54.03
... More
Carriage/disposal of earth/material by mechanical transport including loading, unloading and stacking. (AR/GNIDA). Earth:
-
-
-
... More
Lead upto 2.0 Km.
1050.16
-
59.9
... More
Providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centring, shuttering, but excluding cost of reinforcement, with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). (DSR-13/5.12/P-98)
14
-
5829.65
... More
Road work:
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
595.5
-
109.26
... More
Carriage/disposal of earth/material by mechanical transport including loading, unloading and stacking. (AR/GNIDA). Earth:
-
-
-
... More
Lead upto 2.0 Km.
595.5
-
59.9
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/4.3.1)
308
-
186.4
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
148.85
-
3920.65
... More
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). (DSR-13/16.75/P-275)
Note: Cement content considered in this item is @ 330Kg/Cum. Excess/less cement used as per design mix is payable/recoverable separately.
297.75
-
6248
... More
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete. (DSR-13/16.44/P-268)
1400
-
46.45
... More
Premoulded joint filler 12 mm thick (DSR-13/Code No. 0317/P-9)
397
-
350
... More
Dry brick on edge flooring in required pattern with bricks of class designation 150 on a bed of 12mm mud mortar including filing joints with jamuna sand (with M-150 bricks) complete. DSR-13/11.2/P-186
1488.75
-
508.4
... More
Renavation Community Centre Building
-
-
-
... More
CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime, moorum, building
rubbish upto 5KM DSR-13/1.1.1
10
-
122.64
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
5
-
3920.65
... More
Brick work with bricks of class designation-150 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.2.2/P-111)
3
-
4170.75
... More
Brick work with clay flyash brick of class designation 150 in superstructure above plinth level up to floor five level in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.32.2/P-114)
5
-
5183.9
... More
Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) of class designation 150, conforming to IS: 12894, in superstructure above plinth and upto floor V level.
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR-13/6.45.2/P-114)
5
-
641.3
... More
Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
-
-
-
... More
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10cm of C.C. 1:3:6 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). DSR-13/ 10.13.1
302
-
81.95
... More
Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows all complete with.
-
-
-
... More
5.5 mm thick glass panes. DSR-13/ 10.30.2
18
-
944.9
... More
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of 1:4 cement mortar 1:4 (1 cement : 4 coarse sand).
-
-
-
... More
25mm thick. (DSR-13/11.26.1/P-190)
238
-
1071.7
... More
Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR-13/11.27/P-190)
14
-
1100.85
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-13/11.36/P-191)
127
-
793.6
... More
Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (DSR-13/11.37/P-191)
36
-
822.1
... More
Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR-13/12.22/P-206)
19
-
167.45
... More
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110mm diameter (DSR-13/12.41.2/P-209)
99.28
-
333.43
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR-13/13.41.1/P-225)
694
-
79.65
... More
Finishing walls with textured exterior paint of required shade: New work (two or more coats applied @ 3.28 Ltr./10 Sqm) over and including primer coat of exterior primer applied @ 2.20kg/10 Sqm.(DSR-13/13.45.1/P-225)
327
-
127.1
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
129
-
80.6
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
129
-
24.95
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
1021
-
85.4
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead:
-
-
-
... More
With cement mortar 1:4 (1 cement : 4 fine sand) (DSR-13/14.1.1/P-237)
486
-
221.15
... More
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska:
-
-
-
... More
With M-150 brick tiles (DSR-13/14.18.1/P-238)
274
-
52.2
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR-13/14.43
1021
-
6.9
... More
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
Nominal concrete 1:4:8 leaner mix (including equivalent design mix). (DSR-13/15.2.2/P-248)
10
-
497.15
... More
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar (DSR-13/15.7.4/P-248)
5
-
681
... More
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
-
-
-
... More
For thickness of tiles 10mm to 25mm (DSR-13/15.23.1/P-250)
163
-
25.55
... More
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR-13/15.60/P-253)
15
-
123.85
... More
Renavation Community Centre Building
-
-
-
... More
Elecrical work
-
-
-
... More
Sub Head-I : Wiring
-
-
-
... More
Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable and 1.5 Sqmm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.
-
-
-
... More
Group-A [DSR(E&M)-2013/1.15.1/P-3]
20
-
272
... More
Group-B [DSR(E&M)-2013/1.15.2/P-3]
15
-
312
... More
Group-C [DSR(E&M)-2013/1.15.3/P-3]
10
-
428
... More
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps switch [DSR(E&M)-2013/1.24.1/P-6]
10
-
77
... More
15/16 amp switch [DSR(E&M)-2013/1.24.3/P-6]
5
-
114
... More
3 pin 5/6 amp socket outlet [DSR(E&M)-2013/1.24.4/P-6]
10
-
101
... More
6 pin 15/16 amp socket outlet
[DSR(E&M)-2013/1.24.5/P-6]
5
-
163
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. [DSR(E&M)-2013/1.26/P-6]
18
-
23
... More
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmx75mm) [DSR(E&M)-2013/1.27.1/P-6]
5
-
159
... More
3 Module (100mmx75mm) [DSR(E&M)-2013/1.27.2/P-6]
5
-
172
... More
4 Module (125mmx75mm) [DSR(E&M)-2013/1.27.3/P-6]
8
-
197
... More
Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
... More
1 or 2 Module (DSR(E&M)-2013/1.28.1/P-6)
5
-
73
... More
3 Module (DSR(E&M)-2013/1.28.2/P-6)
5
-
82
... More
4 Module (DSR(E&M)-2013/1.28.3/P-6)
8
-
91
... More
Sub Head-II : Distribution Board
-
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps [DSR(E&M)-2013/2.12.1/P-12]
2
-
267
... More
63 amps [DSR(E&M)-2013/2.12.2/P-12]
1
-
330
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps [DSR(E&M)-2013/2.13.1/P-12]
2
-
604
... More
63 amps [DSR(E&M)-2013/2.13.2/P-12]
1
-
614
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole [DSR(E&M)-2013/2.10.1/P-12]
3
-
146
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 amps [DSR(E&M)-2013/2.14.1/P-12]
2
-
1427
... More
40 amps [DSR(E&M)-2013/2.14.2/P-12]
1
-
1510
... More
Sub Head-III : Internal Wiring
-
-
-
... More
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.
-
-
-
... More
2x2.5 Sqmm + 1x2.5 Sqmm earth wire [DSR(E&M)-2013/1.14.2/P-3]
120
-
140
... More
2x4 Sqmm + 1x4 Sqmm earth wire [DSR(E&M)-2013/1.14.3/P-3]
60
-
171
... More
4x10 Sqmm + 2x10 Sqmm earth wire [DSR(E&M)-2013/1.14.10/P-3]
35
-
575
... More
Sub Head-IV : Fans & Light Fixtures
-
-
-
... More
Supplying, fixing, testing and commissioning of following size exhaust/ fresh air fan complete with gravity louver and connection with 3 core flexible wire as required.
-
-
-
... More
a) 300mm 1400 RPM Heavy duty Metal exhaust fan Havells make model: Turbo Force SP or equivalent preferred makes.
2
-
2850
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25mm [DSR(E&M)-2013/1.21.2/P-5]
75
-
72
... More
Supplying, fixing, testing and commissioning of Surface mounted luminaire for 20W LED Tube light with extruded thermal polycarbonate housing fixture should be of minimum 2000 lumens (6500 KELVIN) suitable for operation on 230 volt 50 Hz,Single Phase AC supply with electronic driver and all accessories complete for ceiling/wall/ Surface including wiring, connection with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including earthing etc. as required. Similar to Wipro Make, Cat No: LL20-221-XXX-65AL1 or equivalent preferred make. (NS-EL-41)
6
-
893
... More
Supply, installation, testing & commissioning of street light 40W LED including poles and all accessories)
4
-
20773
... More
Sub Head-V : Earthing
-
-
-
... More
Earthing with G.I. earth plate 600mmx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required. [(DSR(E&M)-2013/5.4/P-22)]
1
-
4367
... More
Supply and laying 25mmx5mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) [DSR(E&M)-2013/5.9/P-22]
10
-
103
... More
Providing & fixing 25mm x 5mm G.I. strip on surface or in recess for connections etc. as required. [DSR(E&M)-2013/5.15/P-23]
2
-
133
... More
Repair of community Centre building
-
-
-
... More
White vitreous China wash basin size 630x450 mm with a single 15mm C.P. brass pillar taps. (DSR-13/17.7.2/P-288)
4
-
1903.25
... More
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR-13/17.31/P-291)
4
-
762.55
... More
Providing and fixing UPVC pipes as per IS:13592 suitable for 6 Kg/ sq cm pressure, including all fittings with accessories i.e bends, junctions, cowls, offsets, PVC pipe clips/holders etc. and jointing with rubber rings and cement solvent complete as per manufacturer's specifications with excavation, refilling and disposal of surplus earth, including cutting holes in walls and floors ,wherever required and making good the same, complete as directed by the Engineer-in-Charge. (IN-EL-5AA)
-
-
-
... More
110 sq.mm outer dia
10
-
333.42
... More
Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
-
-
-
... More
100 mm inlet and 100 mm outlet. Sand cast iron S&S as per IS: 3989 (DSR-13/17.60.1.1/P-296)
2
-
938.05
... More
Providing and fixing PTMT bottle trap for wash basin and sink.
-
-
-
... More
Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling, 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. (DSR-13/17.70.1/P-297)
4
-
408.25
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
... More
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. (DSR-13/17.4.2/P-287)
4
-
5166.9
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cuttings and making good the wall etc.
Internal work - Exposed on wall:
-
-
-
... More
32mm dia nominal bore (DSR-13/18.10.4/P-320)
10
-
333.5
... More
50mm dia nominal bore (DSR-13/18.10.6/P-320)
10
-
512.1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work - Exposed on wall:
-
-
-
... More
15 mm nominal outer dia Pipes (DSR-13/18.7.1/P-319)
5
-
155.8
... More
20 mm nominal outer dia Pipes (DSR-13/18.7.2/P-319)
5
-
182.15
... More
25 mm nominal outer dia Pipes (DSR-13/18.7.3/P-319)
7
-
222.9
... More
32 mm nominal outer dia Pipes (DSR-13/18.7.4/P-319)
3
-
287.1
... More
40 mm nominal outer dia Pipes (DSR-13/18.7.5/P-319)
3
-
395.6
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
20 mm nominal outer dia pipes (DSR-13/18.8.2/P-319)
5
-
281.35
... More
25 mm nominal outer dia pipes (DSR-13/18.8.3/P-319)
2
-
336.25
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
25 mm nominal bore (DSR-13/18.17.1/P-321)
2
-
427.8
... More
20 mm nominal bore (DSR-13/18.17.1A)
1
-
460
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:
-
-
-
... More
25 mm nominal bore (DSR-13/18.18.3/P-321)
1
-
446.95
... More
Providing and fixing unplasticised PVC connection pipe with brass unions:
-
-
-
... More
45 cm length: 15 mm nominal bore (DSR-13/18.21.2.1/P-322)
2
-
82.45
... More
Providing and fixing 8 mm dia C.P/S.S jet with flaxible tube upto 1.0M long S.S tringular plate to European type of approved quality & make as per the direction of Engineer-in-incharge
8
-
297.55
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931: 15mm nominal bore (DSR-13/18.52.1/P-328)
4
-
618.7
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 : 15mm nominal bore (DSR-13/18.53.1/P-328)
4
-
506.7
... More
Providing and placing on terrace (at all floor levels) polythylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR-13/18.48/P-327)
1000
-
6.3
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge. External work:
-
-
-
... More
25mm nominal outer dia pipes (DSR-13/18.9.3/P-319-320)
3
-
203.1
... More
Constructing masonry chamber 30x30x50cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design:
-
-
-
... More
With bricks of class designation-150 (DSR-13/18.32.1/P-324)
2
-
1101.7
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
724.28
-
109.26
... More
Multipurpose Hall
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
447
-
109.26
... More
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. (DSR-13/2.27/P-75)
22
-
843.65
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. (DSR-13/2.31/P-75)
447
-
2.96
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
4
-
3920.65
... More
White washing with lime to give an even shade: New work (three or more coats) (DSR-13/13.37.1/P-225)
21
-
14.35
... More
Providing and laying 60mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (AR/GNIDA)
646
-
801
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR-13/16.69/P-274)
3
-
5236.95
... More
Boundary wall Community Centre
-
-
-
... More
CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime, moorum, building
rubbish upto All Lead DSR-13/1.1.1
5
-
84.49
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR-13/10.25.2/P-180)
441
-
86.5
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
18
-
24.95
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
... More
On steel work. (DSR-13/13.52.1/P-226)
18
-
109.8
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
597
-
85.4
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead:
-
-
-
... More
With cement mortar 1:4 (1 cement : 4 fine sand) (DSR-13/14.1.1/P-237)
142
-
221.15
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
597
-
6.9
... More
Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @ 3.28 Ltr./10 Sqm (DSR-13/14.65.1/P-243)
591.96
-
106.75
... More
Renovation in Primary School
-
-
-
... More
CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime, moorum, building
rubbish upto 5KM DSR-13/1.1.1
5
-
122.64
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
15
-
3920.65
... More
Brick work with bricks of class designation-150 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.2.2/P-111)
3
-
4170.75
... More
Brick work with clay flyash brick of class designation 150 in superstructure above plinth level up to floor five level in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.32.2/P-114)
10
-
5183.9
... More
Half brick masonry with non modular fly ash lime Gypsum bricks (FALG bricks) of class designation 150, conforming to IS: 12894, in superstructure above plinth and upto floor V level.
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR-13/6.45.2/P-114)
7.5
-
641.3
... More
Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of 1:4 cement mortar 1:4 (1 cement : 4 coarse sand).
-
-
-
... More
25mm thick. (DSR-13/11.26.1/P-190)
241
-
1071.7
... More
Kota stone slabs 20mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (DSR-13/11.27/P-190)
14
-
1100.85
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR-13/11.36/P-191)
158
-
793.6
... More
Providing and laying Ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete. (DSR-13/11.37/P-191)
33
-
822.1
... More
Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over P.V.C. sheet 1m x 1m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR-13/12.22/P-206)
10
-
167.45
... More
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
... More
110mm diameter (DSR-13/12.41.2/P-209)
33
-
218.6
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A, including jointing with seal ring conforming to IS: 5382, leaving 10mm gap for thermal expansion.
-
-
-
... More
Coupler: 110 mm (DSR-13/12.42.1.2/P-209)
10
-
133.55
... More
Bend 87.50 : 110 mm bend (DSR-13/12.42.5.2/P-209)
20
-
160.25
... More
Shoe (Plain): 110 mm shoe (DSR-13/12.42.6.2/P-209)
10
-
290.35
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR-13/13.41.1/P-225)
807
-
79.65
... More
Finishing walls with textured exterior paint of required shade: New work (two or more coats applied @ 3.28 Ltr./10 Sqm) over and including primer coat of exterior primer applied @ 2.20kg/10 Sqm.(DSR-13/13.45.1/P-225)
557
-
127.1
... More
Painting steel work with Deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 Ltr./10 sqm over an under coat of primer applied @ 0.80 Ltr/ 10 Sqm of approved brand or manufacture. (DSR-13/13.48.3/P-226)
170
-
80.6
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
170
-
24.95
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
1364
-
85.4
... More
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead:
-
-
-
... More
With cement mortar 1:4 (1 cement : 4 fine sand) (DSR-13/14.1.1/P-237)
325
-
221.15
... More
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska:
-
-
-
... More
With M-150 brick tiles (DSR-13/14.18.1/P-238)
260
-
52.2
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR-13/14.43
1364
-
6.9
... More
Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
Nominal concrete 1:4:8 leaner mix (including equivalent design mix). (DSR-13/15.2.2/P-248)
5
-
497.15
... More
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar (DSR-13/15.7.4/P-248)
5
-
681
... More
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (DSR-13/15.60/P-253)
5
-
123.85
... More
Elecrical work
-
-
-
... More
Sub Head-I : Wiring
-
-
-
... More
Rewiring for light point/fan point/exhaust fan point/call bell point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable and 1.5 Sqmm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.
-
-
-
... More
Group-A [DSR(E&M)-2013/1.15.1/P-3]
16
-
272
... More
Group-B [DSR(E&M)-2013/1.15.2/P-3]
8
-
312
... More
Group-C [DSR(E&M)-2013/1.15.3/P-3]
16
-
428
... More
Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amps switch [DSR(E&M)-2013/1.24.1/P-6]
16
-
77
... More
15/16 amp switch [DSR(E&M)-2013/1.24.3/P-6]
3
-
114
... More
3 pin 5/6 amp socket outlet [DSR(E&M)-2013/1.24.4/P-6]
8
-
101
... More
6 pin 15/16 amp socket outlet
[DSR(E&M)-2013/1.24.5/P-6]
3
-
163
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (DSR(E&M)-2013/1.25/P-6)
10
-
362
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. [DSR(E&M)-2013/1.26/P-6]
16
-
23
... More
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmx75mm) [DSR(E&M)-2013/1.27.1/P-6]
8
-
159
... More
3 Module (100mmx75mm) [DSR(E&M)-2013/1.27.2/P-6]
8
-
172
... More
4 Module (125mmx75mm) [DSR(E&M)-2013/1.27.3/P-6]
8
-
197
... More
6 Module (200mmx75mm) [DSR(E&M)-2013/1.27.4/P-6]
5
-
241
... More
12 Module (200mmx150mm) [DSR(E&M)-2013/1.27.6/P-6]
3
-
365
... More
Supplying and fixing following modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
... More
1 or 2 Module (DSR(E&M)-2013/1.28.1/P-6)
8
-
73
... More
3 Module (DSR(E&M)-2013/1.28.2/P-6)
8
-
82
... More
4 Module (DSR(E&M)-2013/1.28.3/P-6)
8
-
91
... More
6 Module (DSR(E&M)-2013/1.28.4/P-6)
5
-
109
... More
8 Module [DSR(E&M)-2013/1.28.5/P-6]
3
-
135
... More
Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required. [DSR(E&M)-2013/1.59/]
8
-
221
... More
Sub Head-II : Distribution Board
-
-
-
... More
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps [DSR(E&M)-2013/2.12.1/P-12]
6
-
267
... More
63 amps [DSR(E&M)-2013/2.12.2/P-12]
2
-
330
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 amps [DSR(E&M)-2013/2.13.1/P-12]
3
-
604
... More
63 amps [DSR(E&M)-2013/2.13.2/P-12]
2
-
614
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole [DSR(E&M)-2013/2.10.1/P-12]
6
-
146
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
25 amps [DSR(E&M)-2013/2.14.1/P-12]
3
-
1427
... More
40 amps [DSR(E&M)-2013/2.14.2/P-12]
2
-
1510
... More
Sub Head-III : Internal Wiring
-
-
-
... More
Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.
-
-
-
... More
2x2.5 Sqmm + 1x2.5 Sqmm earth wire [DSR(E&M)-2013/1.14.2/P-3]
120
-
140
... More
2x4 Sqmm + 1x4 Sqmm earth wire [DSR(E&M)-2013/1.14.3/P-3]
48
-
171
... More
4x10 Sqmm + 2x10 Sqmm earth wire [DSR(E&M)-2013/1.14.10/P-3]
40
-
575
... More
Sub Head-IV : Fans & Light Fixtures
-
-
-
... More
Supplying, fixing, testing and commissioning of 5 Star BEE rating 1200mm sweep ceiling fan complete with blades, down rod, shackle insulator, canopy etc. including providing of electronic step regulator with face plate matching the existing modular switches as required similar to Havells make Model: ES-50 Premium 5 star or equivalent preferred make. (NS-EL-4F)
13
-
1759
... More
Supplying, fixing, testing and commissioning of following size exhaust/ fresh air fan complete with gravity louver and connection with 3 core flexible wire as required.
-
-
-
... More
a) 300mm 1400 RPM Heavy duty Metal exhaust fan Havells make model: Turbo Force SP or equivalent preferred makes.
7
-
2850
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
25mm [DSR(E&M)-2013/1.21.2/P-5]
60
-
72
... More
Supplying, fixing, testing and commissioning of Surface mounted luminaire for 20W LED Tube light with extruded thermal polycarbonate housing fixture should be of minimum 2000 lumens (6500 KELVIN) suitable for operation on 230 volt 50 Hz,Single Phase AC supply with electronic driver and all accessories complete for ceiling/wall/ Surface including wiring, connection with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable including earthing etc. as required. Similar to Wipro Make, Cat No: LL20-221-XXX-65AL1 or equivalent preferred make. (NS-EL-41)
37
-
893
... More
Plumbing work primary school
-
-
-
... More
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge:
-
-
-
... More
15mm to 40 mm nominal bore (DSR-13/15.44.1/P-251)
10
-
52.6
... More
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:
-
-
-
... More
Upto 150 mm diameter (DSR-13/15.45.1/P-252)
11
-
155.2
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (DSR-13/15.52/P-252)
12
-
322
... More
Providing and fixing white vitreous china pedestal type water closet (Indian type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid. (DSR-13/17.1.1/P-287)
7
-
3265.25
... More
Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
White vitreous China wash basin size 630x450 mm with a single 15mm C.P. brass pillar taps. (DSR-13/17.7.2/P-288)
6
-
1903.25
... More
Providing and fixing UPVC pipes as per IS:13592 suitable for 6 Kg/ sq cm pressure, including all fittings with accessories i.e bends, junctions, cowls, offsets, PVC pipe clips/holders etc. and jointing with rubber rings and cement solvent complete as per manufacturer's specifications with excavation, refilling and disposal of surplus earth, including cutting holes in walls and floors ,wherever required and making good the same, complete as directed by the Engineer-in-Charge. (IN-EL-5AA)
-
-
-
... More
110 sq.mm outer dia
10
-
333.42
... More
Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:
-
-
-
... More
100 mm inlet and 100 mm outlet. Sand cast iron S&S as per IS: 3989 (DSR-13/17.60.1.1/P-296)
4
-
938.05
... More
Bottle trap 31mm single piece moulded with height of 270mm, effective length of tail pipe 260mm from the centre of the waste coupling, 77mm breadth with 25mm minimum water seal, weighing not less than 260gms. (DSR-13/17.70.1/P-297)
6
-
408.25
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350mm and 340 x 410 x 265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:
-
-
-
... More
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. (DSR-13/17.4.2/P-287)
4
-
5166.9
... More
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
Circular Type: 100 mm nominal dia. (DSR-13/18.58.1.1/P-328-329)
12
-
44.2
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cuttings and making good the wall etc.
Internal work - Exposed on wall:
-
-
-
... More
32mm dia nominal bore (DSR-13/18.10.4/P-320)
15
-
333.5
... More
50mm dia nominal bore (DSR-13/18.10.6/P-320)
15
-
552.1
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work - Exposed on wall:
-
-
-
... More
15 mm nominal outer dia Pipes (DSR-13/18.7.1/P-319)
15
-
155.8
... More
20 mm nominal outer dia Pipes (DSR-13/18.7.2/P-319)
12
-
182.15
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
... More
25 mm nominal bore (DSR-13/18.17.1/P-321)
4
-
427.8
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:
-
-
-
... More
25 mm nominal bore (DSR-13/18.18.3/P-321)
3
-
446.95
... More
Providing and fixing unplasticised PVC connection pipe with brass unions:
-
-
-
... More
45 cm length: 15 mm nominal bore (DSR-13/18.21.2.1/P-322)
6
-
82.45
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931: 15mm nominal bore (DSR-13/18.52.1/P-328)
6
-
618.7
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 : 15mm nominal bore (DSR-13/18.53.1/P-328)
6
-
506.7
... More
Providing and placing on terrace (at all floor levels) polythylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR-13/18.48/P-327)
1000
-
6.3
... More
Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge. External work:
-
-
-
... More
25mm nominal outer dia pipes (DSR-13/18.9.3/P-319-320)
15
-
203.1
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
499
-
109.26
... More
EX Dev. Civil work Primary school
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
1722
-
109.26
... More
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. (DSR-13/2.27/P-75)
86
-
843.65
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. (DSR-13/2.31/P-75)
1722
-
2.97
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
92
-
3920.65
... More
White washing with lime to give an even shade: New work (three or more coats) (DSR-13/13.37.1/P-225)
46
-
14.35
... More
Providing and laying 60mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (AR/GNIDA)
39
-
801
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR-13/16.69/P-274)
7
-
5236.95
... More
Boundary wall primary school
-
-
-
... More
CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime, moorum, building
rubbish upto 5KM DSR-13/1.1.1
5
-
84.45
... More
20mm cement plaster of mix: 1:4 (1 cement : 4 coarse sand) (DSR-13/13.6.1/P-222)
688
-
215.8
... More
Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @ 3.28 Ltr./10 Sqm (DSR-13/14.65.1/P-243)
688
-
106.75
... More
Painting steel work with Deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 Ltr./10 sqm over an under coat of primer applied @ 0.80 Ltr/ 10 Sqm of approved brand or manufacture. (DSR-13/13.48.3/P-226)
7
-
80.6
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
7
-
24.95
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
683.86
-
85.4
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR-13/14.43
172
-
6.9
... More
Development Of Pond-I
-
-
-
... More
CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime, moorum, building
rubbish upto 5KM DSR-13/1.1.1
2019
-
84.45
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depression as per MORTH. (A.R./GNIDA) All kinds of soil.
-
-
-
... More
Lead upto 50M and lift upto 1.50M
2019
-
71.09
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. (DSR-13/2.31/P-75)
3364
-
2.96
... More
Dev. Of Pond-II
-
-
-
... More
CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime, moorum, building
rubbish upto 5KM DSR-13/1.1.1
3962
-
84.45
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depression as per MORTH. (A.R./GNIDA) All kinds of soil.
-
-
-
... More
Lead upto 50M and lift upto 1.50M
3962
-
71.09
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. (DSR-13/2.31/P-75)
6603
-
2.97
... More
Dev. Of Pond-III
-
-
-
... More
CARRIAGE OF MATERIALS By Mechanical Transport including loading,unloading and stacking Lime, moorum, building
rubbish upto 5KM DSR-13/1.1.1
2345
-
84.45
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depression as per MORTH. (A.R./GNIDA) All kinds of soil.
-
-
-
... More
Lead upto 50M and lift upto 1.50M
2345
-
71.09
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. (DSR-13/2.31/P-75)
3908
-
2.97
... More
Development of Playground
-
-
-
... More
Earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks marginal banks and guide banks or filling up ground depression as per MORTH. (A.R./GNIDA) All kinds of soil.
-
-
-
... More
Lead upto 50M and lift upto 1.50M
99
-
71.09
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
63
-
54.03
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
9
-
3920.65
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
108
-
186.4
... More
Columns, pillars, piers, abutments, posts and struts. (DSR-13/5.9.6/P-97)
64
-
423
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
2339
-
66.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Cold twisted bars (DSR-13/5.22A.3/P-99)
354
-
66.5
... More
Providing and laying in position machine batched, machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportion as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note: Cement content considered in this item is @ 330 Kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
-
-
-
... More
All works upto plinth level. (DSR-13/5.33.1/P-101)
27
-
5704.45
... More
All works above plinth level upto floor V level. (DSR-13/5.33.2/P-101)
3
-
6353
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR-13/10.25.2/P-180)
331
-
86.5
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
70
-
24.95
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
... More
On steel work. (DSR-13/13.52.1/P-226)
70
-
109.8
... More
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for serarately) :- Payment to be made per metre cost of total length of barbed wire used.
-
-
-
... More
With G.I. barbed wire.DSR-13/16.18.1
4377
-
12.5
... More
Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia etc. complete. (DSR-13/16.19/P-264)
1351
-
69.75
... More
Play ground civil work
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
2516
-
109.26
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
184
-
54.03
... More
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. (DSR-13/2.27/P-75)
11
-
843.65
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. (DSR-13/2.31/P-75)
2516
-
2.96
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
19
-
3920.65
... More
White washing with lime to give an even shade: New work (three or more coats) (DSR-13/13.37.1/P-225)
101
-
14.35
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
120
-
24.95
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
... More
On steel work. (DSR-13/13.52.1/P-226)
120
-
109.8
... More
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.
-
-
-
... More
Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 3.28 ltr /10 sqm. DSR-13/13.48.1
28.8
-
127.1
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
28.8
-
85.4
... More
Supply & stacking at site. Good earth DSR-13/16.3.9
184
-
308.35
... More
Supply & stacking at site. Moorum. DSR-13/16.3.10
14
-
646.55
... More
Providing and laying 60mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (AR/GNIDA)
192
-
801
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (DSR-13/16.69/P-274)
15
-
5236.95
... More
Play ground Elecrical work
-
-
-
... More
Supply, installation, testing & commissioning of street light 40W LED including poles and all accessories)
13
-
20773
... More
BasketBall Court
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
44
-
3920.65
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres. (DSR-13/16.1/P-262)
441
-
73.55
... More
Supplying and stacking at site:
-
-
-
... More
90 mm to 45 mm size stone aggregate (AR/GNIDA)
55
-
1147.55
... More
53 mm to 22.4 mm size stone aggregate (AR/GNIDA)
55
-
1263.7
... More
Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate watering and compacting to the required density. (DSR-13/16.4/P-262)
110
-
388.85
... More
Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia etc. complete. (DSR-13/16.19/P-264)
1418
-
69.75
... More
Badminton Court
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
9
-
3920.65
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres. (DSR-13/16.1/P-262)
76.91
-
73.55
... More
Supplying and stacking at site:
-
-
-
... More
90 mm to 45 mm size stone aggregate (AR/GNIDA)
11
-
1147.55
... More
53 mm to 22.4 mm size stone aggregate (AR/GNIDA)
11
-
1263.7
... More
Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate watering and compacting to the required density. (DSR-13/16.4/P-262)
21
-
388.85
... More
Supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia etc. complete. (DSR-13/16.19/P-264)
99
-
69.75
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
3
-
24.95
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
... More
On steel work. (DSR-13/13.52.1/P-226)
3
-
109.8
... More
Development of Cremation ground
Boundary wall Cremation Ground
-
-
-
... More
Earth work in excavation in ordinary soil in all type of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m. All kinds of soil. (MORTH/A.R./GNIDA)
-
-
-
... More
Depth from 0.0 to 1.5 M below G.L.
136
-
109.26
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m. (AR/GNIDA)
90
-
54.03
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level: (Cast-in-Situ)
-
-
-
... More
1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size). (DSR-13/4.1.8/P-85)
16
-
3920.65
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) (DSR-13/4.10/P-87)
49
-
220.6
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. (DSR-13/4.12/P-87)
13
-
44.36
... More
Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg. per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. (DSR-13/4.13/P-87)
49
-
108.75
... More
Centring and shuttering including strutting, propping etc. and removal of form for:
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete. (DSR-13/5.9.1/P-97)
81
-
186.4
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers. (DSR-13/5.9.5/P-97)
212
-
309.8
... More
Columns, pillars, piers, abutments, posts and struts. (DSR-13/5.9.6/P-97)
222
-
423
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-mechanically treated bars/Cold twisted bars. (DSR-13/5.22.6/P-99)
4015
-
66.5
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Cold twisted bars (DSR-13/5.22A.3/P-99)
2296
-
66.5
... More
Providing and laying in position machine batched, machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportion as per IS : 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note: Cement content considered in this item is @ 330 Kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately).
-
-
-
... More
All works upto plinth level. (DSR-13/5.33.1/P-101)
44
-
5704.45
... More
All works above plinth level upto floor V level. (DSR-13/5.33.2/P-101)
22
-
6353
... More
Brick work with bricks of class designation 150 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.1.2/P-111)
28
-
4646.5
... More
Brick work with clay flyash brick of class designation 150 in superstructure above plinth level up to floor five level in:
-
-
-
... More
Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR-13/6.32.2/P-114)
71
-
5183.9
... More
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR-13/10.25.2/P-180)
441
-
86.5
... More
20 mm cement plaster of mix.
-
-
-
... More
1:4 (1 cement : 4 fine sand).DSR-13/13.3.1
391
-
202.75
... More
Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.DSR-13/13.21
350
-
46.7
... More
Finishing walls with textured exterior paint of required shade: New work (two or more coats applied @ 3.28 Ltr./10 Sqm) over and including primer coat of exterior primer applied @ 2.20kg/10 Sqm.(DSR-13/13.45.1/P-225)
733
-
127.1
... More
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. (DSR-13/13.50.3/P-226)
18
-
24.95
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
... More
On steel work. (DSR-13/13.52.1/P-226)
18
-
109.8
... More
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR-13/13.80/P-229)
733
-
85.4
... More
Add labour cess @ 1% on all above items
64896683.98
-
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements